Hello,

New boot regression found on stable-rc/linux-6.12.y:

--- NULL pointer dereference at virtual address 00000000000000d0 [logspec:generic_linux_boot,linux.kernel.null_pointer_dereference] ---

- dashboard: https://d.kernelci.org/issue/maestro:5a856af05fecdebd3b9507ff4ed4d0b5b6a54b6... - giturl: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git - commit HEAD: 43639cc57b2273fce42874dd7f6e0b872f4984c5

Log excerpt: ===================================================== [ 2.221462] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [ 2.223502] Key type fscrypt-provisioning registered [ 2.223634] Key type encrypted registered [ 2.232290] Mem abort info: [ 2.244067] ESR = 0x0000000096000004 [ 2.247839] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.253175] SET = 0, FnV = 0 [ 2.253596] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/ovl@14005000 [ 2.253665] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/ovl@14006000 [ 2.253698] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/rdma@14007000 [ 2.253730] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/color@14009000 [ 2.253774] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/ccorr@1400b000 [ 2.253806] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/aal@1400c000 [ 2.253839] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/gamma@1400d000 [ 2.253958] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/dsi@14013000 [ 2.254004] mediatek-drm mediatek-drm.15.auto: Adding component match for /soc/rdma@1401f000 [ 2.256239] EA = 0, S1PTW = 0 [ 2.263379] reg-fixed-voltage regulator-pp3300-disp-x: using DT '/regulator-pp3300-disp-x' for '(default)' GPIO lookup [ 2.263399] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-pp3300-disp-x[0]' - status (0) [ 2.263418] gpio gpiochip0: Persistence not supported for GPIO 153 [ 2.263517] reg-fixed-voltage regulator-pp3300-s3: using DT '/regulator-pp3300-s3' for '(default)' GPIO lookup [ 2.263529] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-pp3300-s3[0]' [ 2.263539] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-pp3300-s3[0]' [ 2.263549] reg-fixed-voltage regulator-pp3300-s3: using lookup tables for GPIO lookup [ 2.263553] reg-fixed-voltage regulator-pp3300-s3: No GPIO consumer (default) found [ 2.263728] reg-fixed-voltage regulator-usb-p1-vbus: using DT '/regulator-usb-p1-vbus' for '(default)' GPIO lookup [ 2.263742] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-usb-p1-vbus[0]' [ 2.263763] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator-usb-p1-vbus[0]' - status (0) [ 2.263780] gpio gpiochip0: Persistence not supported for GPIO 148 [ 2.264577] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-pp3300-ldo-z5[0]' [ 2.272938] FSC = 0x04: level 0 translation fault [ 2.273171] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1999998 KHz, changing to: 2000000 KHz [ 2.273574] cpu cpu0: EM: created perf domain [ 2.273669] pp3300_vcn33_x: Bringing 3500000uV into 3300000-3300000uV [ 2.274033] cpufreq: cpufreq_online: CPU6: Running at unlisted initial frequency: 1084999 KHz, changing to: 1085000 KHz [ 2.274430] cpu cpu6: EM: created perf domain [ 2.274852] pp2760_vsim2_x: Bringing 1860000uV into 2700000-2700000uV [ 2.275758] i2c_hid_of 2-002c: using DT '/soc/i2c@11009000/trackpad@2c' for 'reset' GPIO lookup [ 2.275812] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/i2c@11009000/trackpad@2c[0]' [ 2.275879] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/i2c@11009000/trackpad@2c[0]' [ 2.275910] i2c_hid_of 2-002c: using lookup tables for GPIO lookup [ 2.275914] i2c_hid_of 2-002c: No GPIO consumer reset found [ 2.275970] i2c_hid_of_goodix 1-005d: using DT '/soc/i2c@11008000/touchscreen@5d' for 'reset' GPIO lookup [ 2.276063] i2c_hid_of 2-002c: supply vddl not found, using dummy regulator [ 2.276059] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/i2c@11008000/touchscreen@5d[0]' - status (0) [ 2.276099] gpio gpiochip0: Persistence not supported for GPIO 60 [ 2.276212] i2c_hid_of_goodix 1-005d: supply mainboard-vddio not found, using dummy regulator [ 2.279909] mt6358-sound mt6358-sound: mt6358_platform_driver_probe(), dev name mt6358-sound [ 2.280156] rt5682s 5-001a: Using default DAI clk names: rt5682-dai-wclk, rt5682-dai-bclk [ 2.281342] reg-fixed-voltage regulator-pp3300-ldo-z5: using lookup tables for GPIO lookup [ 2.281345] reg-fixed-voltage regulator-pp3300-ldo-z5: No GPIO consumer (default) found [ 2.281559] reg-fixed-voltage regulator-pp1800-dpbrdg-dx: using DT '/regulator-pp1800-dpbrdg-dx' for '(default)' GPIO lookup [ 2.281715] reg-fixed-voltage regulator-pp1800-edpbrdg-dx: using DT '/regulator-pp1800-edpbrdg-dx' for '(default)' GPIO lookup [ 2.281722] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-pp1800-edpbrdg-dx[0]' [ 2.281734] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator-pp1800-edpbrdg-dx[0]' - status (0) [ 2.281743] gpio gpiochip0: Persistence not supported for GPIO 30 [ 2.281986] rt5682s 5-001a: using DT '/soc/i2c@11016000/codec@1a' for 'realtek,ldo1-en' GPIO lookup [ 2.282002] of_get_named_gpiod_flags: can't parse 'realtek,ldo1-en-gpios' property of node '/soc/i2c@11016000/codec@1a[0]' [ 2.282014] of_get_named_gpiod_flags: can't parse 'realtek,ldo1-en-gpio' property of node '/soc/i2c@11016000/codec@1a[0]' [ 2.282022] rt5682s 5-001a: using lookup tables for GPIO lookup [ 2.282026] rt5682s 5-001a: No GPIO consumer realtek,ldo1-en found [ 2.286514] panfrost 13040000.gpu: clock rate = 249999863 [ 2.288872] panfrost 13040000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device [ 2.289521] panfrost 13040000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 2.289527] panfrost 13040000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400 [ 2.289532] panfrost 13040000.gpu: Features: L2:0x07120206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7 [ 2.289538] panfrost 13040000.gpu: shader_present=0x3 l2_present=0x1 [ 2.290073] Data abort info: [ 2.291102] [drm] Initialized panfrost 1.2.0 for 13040000.gpu on minor 0 [ 2.291640] mtu3 11201000.usb: supply vusb33 not found, using dummy regulator [ 2.291905] mtu3 11201000.usb: uwk - reg:0x420, version:2 [ 2.291982] mtu3 11201000.usb: dr_mode: 3, drd: auto [ 2.291987] mtu3 11201000.usb: u2p_dis_msk: 0, u3p_dis_msk: 0 [ 2.292141] mtu3 11201000.usb: usb3-drd: 0 [ 2.292911] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator [ 2.293231] xhci-mtk 11200000.usb: xHCI Host Controller [ 2.293400] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1 [ 2.293469] xhci-mtk 11200000.usb: USB3 root hub has no ports [ 2.293474] xhci-mtk 11200000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000200010 [ 2.293501] xhci-mtk 11200000.usb: irq 269, io mem 0x11200000 [ 2.293704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.293711] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.293715] usb usb1: Product: xHCI Host Controller [ 2.293718] usb usb1: Manufacturer: Linux 6.12.18-rc1 xhci-hcd [ 2.293722] usb usb1: SerialNumber: 11200000.usb [ 2.294096] hub 1-0:1.0: USB hub found [ 2.294119] hub 1-0:1.0: 1 port detected [ 2.294373] mtu3 11201000.usb: xHCI platform device register success... [ 2.294941] mtu3 11281000.usb: supply vusb33 not found, using dummy regulator [ 2.295211] mtu3 11281000.usb: uwk - reg:0x424, version:2 [ 2.295298] mtu3 11281000.usb: dr_mode: 3, drd: auto [ 2.295303] mtu3 11281000.usb: u2p_dis_msk: 0, u3p_dis_msk: 0 [ 2.295449] mtu3 11281000.usb: usb3-drd: 1 [ 2.297623] xhci-mtk 11280000.usb: supply vusb33 not found, using dummy regulator [ 2.297959] xhci-mtk 11280000.usb: xHCI Host Controller [ 2.298124] xhci-mtk 11280000.usb: new USB bus registered, assigned bus number 2 [ 2.298410] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-pp1800-dpbrdg-dx[0]' - status (0) [ 2.299642] xhci-mtk 11280000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000200010 [ 2.299676] xhci-mtk 11280000.usb: irq 270, io mem 0x11280000 [ 2.299776] xhci-mtk 11280000.usb: xHCI Host Controller [ 2.299928] xhci-mtk 11280000.usb: new USB bus registered, assigned bus number 3 [ 2.299943] xhci-mtk 11280000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 2.300053] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.300059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.300063] usb usb2: Product: xHCI Host Controller [ 2.300066] usb usb2: Manufacturer: Linux 6.12.18-rc1 xhci-hcd [ 2.300070] usb usb2: SerialNumber: 11280000.usb [ 2.300411] hub 2-0:1.0: USB hub found [ 2.300433] hub 2-0:1.0: 1 port detected [ 2.300684] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.300753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.300759] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.300763] usb usb3: Product: xHCI Host Controller [ 2.300766] usb usb3: Manufacturer: Linux 6.12.18-rc1 xhci-hcd [ 2.300770] usb usb3: SerialNumber: 11280000.usb [ 2.301070] hub 3-0:1.0: USB hub found [ 2.301090] hub 3-0:1.0: 1 port detected [ 2.301348] mtu3 11281000.usb: xHCI platform device register success... [ 2.301983] anx7625 0-0058: using DT '/soc/i2c@11007000/anx7625@58' for 'enable' GPIO lookup [ 2.301999] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/soc/i2c@11007000/anx7625@58[0]' - status (0) [ 2.302020] gpio gpiochip0: Persistence not supported for GPIO 96 [ 2.302033] anx7625 0-0058: using DT '/soc/i2c@11007000/anx7625@58' for 'reset' GPIO lookup [ 2.302045] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/i2c@11007000/anx7625@58[0]' - status (0) [ 2.302058] gpio gpiochip0: Persistence not supported for GPIO 98 [ 2.306779] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.315334] gpio gpiochip0: Persistence not supported for GPIO 39 [ 2.323615] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.323617] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.323619] [00000000000000d0] user address but active_mm is swapper [ 2.323622] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.359334] panel-simple-dp-aux aux-0-0058: using DT '/soc/i2c@11007000/anx7625@58/aux-bus/panel' for 'hpd' GPIO lookup [ 2.362170] Modules linked in: [ 2.362174] CPU: 6 UID: 0 PID: 81 Comm: kworker/u32:4 Not tainted 6.12.18-rc1 #1 3a46926a83206508ac114c105c0e62582044df70 [ 2.362179] Hardware name: Google Steelix board (DT) [ 2.362181] Workqueue: async async_run_entry_fn [ 2.372178] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/soc/i2c@11007000/anx7625@58/aux-bus/panel[0]' [ 2.381277] [ 2.381278] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.381281] pc : power_allocator_bind+0xd0/0x2e0 [ 2.390318] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/soc/i2c@11007000/anx7625@58/aux-bus/panel[0]' [ 2.398210] lr : power_allocator_bind+0x34/0x2e0 [ 2.398212] sp : ffff8000808e3010 [ 2.398213] x29: ffff8000808e3010 x28: ffff77e38090f000 x27: ffffc2d32b3b02d0 [ 2.398217] x26: ffffc2d32c6b1c18 x25: 0000000000000000 x24: ffff77e38090e800 [ 2.398220] x23: 0000000000000000 [ 2.405877] panel-simple-dp-aux aux-0-0058: using lookup tables for GPIO lookup [ 2.416187] x22: ffff77e38090f000 x21: ffffc2d32b799440 [ 2.416189] x20: ffff77e380e16fc0 x19: 0000000000000000 x18: ffffffffffffffff [ 2.416192] x17: 000000040044ffff x16: 005000f2b5503510 x15: ffff8000808e2e30 [ 2.416195] x14: ffff77e3801dea1c x13: ffff77e3801de26f x12: 0000000000000001 [ 2.416198] x11: 0000000084683902 x10: 0000000000000000 x9 : ffffc2d3298f13c8 [ 2.416201] x8 : ffff77e380e17000 [ 2.425498] panel-simple-dp-aux aux-0-0058: No GPIO consumer hpd found [ 2.435385] x7 : 0000000000000000 x6 : 0000000000000000 [ 2.435387] x5 : 0000000000000000 x4 : 0000000000000040 x3 : 0000000000000000 [ 2.435390] x2 : ffffffffffffffc0 x1 : 0000000000000000 x0 : ffff77e38090f578 [ 2.435393] Call trace: [ 2.435394] power_allocator_bind+0xd0/0x2e0 [ 2.441647] panel-simple-dp-aux aux-0-0058: using DT '/soc/i2c@11007000/anx7625@58/aux-bus/panel' for 'enable' GPIO lookup [ 2.450933] thermal_set_governor+0x48/0xc0 [ 2.450937] thermal_zone_device_register_with_trips+0x3ec/0x5a0 [ 2.450941] thermal_tripless_zone_device_register+0x30/0x40 [ 2.450945] __power_supply_register.part.0+0x358/0x4b0 [ 2.455820] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/soc/i2c@11007000/anx7625@58/aux-bus/panel[0]' [ 2.466571] __power_supply_register+0x60/0xb0 [ 2.466574] devm_power_supply_register+0x60/0xb0 [ 2.466578] sbs_probe+0x288/0x398 [ 2.466580] i2c_device_probe+0x14c/0x290 [ 2.470942] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/soc/i2c@11007000/anx7625@58/aux-bus/panel[0]' [ 2.477345] really_probe+0xc0/0x2a0 [ 2.477349] __driver_probe_device+0x7c/0x138 [ 2.477352] driver_probe_device+0x40/0x118 [ 2.477355] __device_attach_driver+0xb4/0xf8 [ 2.477358] bus_for_each_drv+0x88/0xe8 [ 2.477360] __device_attach+0xa0/0x190 [ 2.488134] panel-simple-dp-aux aux-0-0058: using lookup tables for GPIO lookup [ 2.492463] device_initial_probe+0x18/0x28 [ 2.492466] bus_probe_device+0xa8/0xb8 [ 2.492469] device_add+0x568/0x738 [ 2.492471] device_register+0x24/0x38 [ 2.492473] i2c_new_client_device+0x198/0x370 [ 2.498909] panel-simple-dp-aux aux-0-0058: No GPIO consumer enable found [ 2.507579] of_i2c_register_devices+0x114/0x198 [ 2.507581] i2c_register_adapter+0x200/0x670 [ 2.507584] i2c_add_adapter+0x7c/0xd8 [ 2.604977] panel-simple-dp-aux aux-0-0058: Detected AUO B116XAN06.3 (0x635c) [ 2.607331] ec_i2c_probe+0xdc/0x158 [ 2.607334] platform_probe+0x6c/0xc8 [ 2.607337] really_probe+0xc0/0x2a0 [ 2.607340] __driver_probe_device+0x7c/0x138 [ 2.615592] it6505 3-005c: can not get extcon device! [ 2.626524] driver_probe_device+0x40/0x118 [ 2.626527] __device_attach_driver+0xb4/0xf8 [ 2.626530] bus_for_each_drv+0x88/0xe8 [ 2.639217] mtk-msdc 11230000.mmc: using DT '/soc/mmc@11230000' for 'wp' GPIO lookup [ 2.639300] mtk-msdc 11240000.mmc: using DT '/soc/mmc@11240000' for 'wp' GPIO lookup [ 2.639314] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@11240000[0]' [ 2.639326] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@11240000[0]' [ 2.639334] mtk-msdc 11240000.mmc: using lookup tables for GPIO lookup [ 2.639338] mtk-msdc 11240000.mmc: No GPIO consumer wp found [ 2.639364] mtk-msdc 11240000.mmc: allocated mmc-pwrseq [ 2.643184] mtk-iommu 14016000.iommu: bound 14003000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643191] mtk-iommu 14016000.iommu: bound 14004000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643193] mtk-iommu 14016000.iommu: bound 1b002000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643196] mtk-iommu 14016000.iommu: bound 1602e000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643198] mtk-iommu 14016000.iommu: bound 17010000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643201] mtk-iommu 14016000.iommu: bound 14023000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643204] mtk-iommu 14016000.iommu: bound 1502e000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643206] mtk-iommu 14016000.iommu: bound 1582e000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643208] mtk-iommu 14016000.iommu: bound 1a001000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643211] mtk-iommu 14016000.iommu: bound 1a002000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643214] mtk-iommu 14016000.iommu: bound 1a00f000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643216] mtk-iommu 14016000.iommu: bound 1a010000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643218] mtk-iommu 14016000.iommu: bound 1c10f000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643221] mtk-iommu 14016000.iommu: bound 1c00f000.smi (ops 0xffffc2d32b3d3ca8) [ 2.643357] mediatek-disp-ovl 14005000.ovl: Adding to iommu group 0 [ 2.643682] mediatek-disp-ovl 14006000.ovl: Adding to iommu group 0 [ 2.643856] mediatek-disp-rdma 14007000.rdma: Adding to iommu group 0 [ 2.644010] mediatek-disp-rdma 1401f000.rdma: Adding to iommu group 0 [ 2.644240] mediatek-drm mediatek-drm.15.auto: bound 14005000.ovl (ops 0xffffc2d32a886270) [ 2.644245] mediatek-drm mediatek-drm.15.auto: bound 14006000.ovl (ops 0xffffc2d32a886270) [ 2.644248] mediatek-drm mediatek-drm.15.auto: bound 14007000.rdma (ops 0xffffc2d32a887478) [ 2.644250] mediatek-drm mediatek-drm.15.auto: bound 14009000.color (ops 0xffffc2d32a885a20) [ 2.644253] mediatek-drm mediatek-drm.15.auto: bound 1400b000.ccorr (ops 0xffffc2d32a8857a8) [ 2.644256] mediatek-drm mediatek-drm.15.auto: bound 1400c000.aal (ops 0xffffc2d32a885538) [ 2.644259] mediatek-drm mediatek-drm.15.auto: bound 1400d000.gamma (ops 0xffffc2d32a885d68) [ 2.645595] mediatek-drm mediatek-drm.15.auto: bound 14013000.dsi (ops 0xffffc2d32a88bc48) [ 2.645600] mediatek-drm mediatek-drm.15.auto: bound 1401f000.rdma (ops 0xffffc2d32a887478) [ 2.645640] mediatek-drm mediatek-drm.15.auto: Not creating crtc 1 because component 10 is disabled or missing [ 2.646204] [drm] Initialized mediatek 1.0.0 for mediatek-drm.15.auto on minor 1 [ 2.647659] gpio-keys gpio-keys: using DT '/gpio-keys/pen-insert-switch' for '(default)' GPIO lookup [ 2.647679] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/pen-insert-switch[0]' - status (0) [ 2.647699] gpio gpiochip0: Persistence not supported for GPIO 18 [ 2.647707] __device_attach+0xa0/0x190 [ 2.647710] device_initial_probe+0x18/0x28 [ 2.647713] bus_probe_device+0xa8/0xb8 [ 2.647715] device_add+0x568/0x738 [ 2.647717] of_device_add+0x54/0x68 [ 2.647721] of_platform_device_create_pdata+0x94/0x130 [ 2.647723] of_platform_bus_create+0x154/0x390 [ 2.647726] of_platform_populate+0x54/0x100 [ 2.647728] devm_of_platform_populate+0x5c/0xc0 [ 2.647840] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.648296] gpio-keys wifi-wakeup: using DT '/wifi-wakeup/wowlan-event' for '(default)' GPIO lookup [ 2.648307] of_get_named_gpiod_flags: parsed 'gpios' property of node '/wifi-wakeup/wowlan-event[0]' - status (0) [ 2.648317] gpio gpiochip0: Persistence not supported for GPIO 7 [ 2.648375] input: wifi-wakeup as /devices/platform/wifi-wakeup/input/input1 [ 2.658162] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@11230000[0]' [ 2.664222] cros_ec_register+0x188/0x368 [ 2.664226] cros_ec_spi_probe+0x178/0x248 [ 2.664228] spi_probe+0x88/0xe8 [ 2.671184] clk: Disabling unused clocks [ 2.671423] PM: genpd: Disabling unused power domains [ 2.671491] ALSA device list: [ 2.671494] No soundcards found. [ 2.673266] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@11230000[0]' [ 2.684279] really_probe+0xc0/0x2a0 [ 2.684282] __driver_probe_device+0x7c/0x138 [ 2.684285] driver_probe_device+0x40/0x118 [ 2.695228] mtk-msdc 11230000.mmc: using lookup tables for GPIO lookup [ 2.701124] __driver_attach_async_helper+0x50/0xb8 [ 2.701127] async_run_entry_fn+0x3c/0x158 [ 2.701129] process_one_work+0x188/0x438 [ 2.707300] mtk-msdc 11230000.mmc: No GPIO consumer wp found [ 2.712677] worker_thread+0x304/0x410 [ 2.712680] kthread+0x124/0x130 [ 2.849438] hid-multitouch 0018:27C6:0EAA.0001: unknown main item tag 0x0 [ 2.853240] ret_from_fork+0x10/0x20 [ 2.853246] Code: b4000b47 aa0703e5 a9019e86 52800013 (f84d0ca0)

=====================================================

# Hardware platforms affected:

## mt8186-corsola-steelix-sku131072 - dashboard: https://d.kernelci.org/test/maestro:67c8c8c618018371956e15b6 - compatibles: google,steelix-sku131072 | google,steelix - 1 fails since 2025-03-05 22:20 UTC - test path: boot.nfs - last pass: https://d.kernelci.org/test/maestro:67bd7856323b35c54a886f0c - on 2025-02-25 07:59 UTC - commit hash: f5c37852dffd24f66248b4086ea594060f3299a4 - test id: maestro:67bd7856323b35c54a886f0c

#kernelci issue maestro:5a856af05fecdebd3b9507ff4ed4d0b5b6a54b63

Reported-by: kernelci.org bot bot@kernelci.org

-- This is an experimental report format. Please send feedback in! Talk to us at kernelci@lists.linux.dev

Made with love by the KernelCI team - https://kernelci.org