From: Madhuparna Bhowmik madhuparnabhowmik10@gmail.com

[ Upstream commit 770f60586d2af0590be263f55fd079226313922c ]

This patch fixes the following warning and few other instances of traversal of evm_config_xattrnames list:

[ 32.848432] ============================= [ 32.848707] WARNING: suspicious RCU usage [ 32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted [ 32.849308] ----------------------------- [ 32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!!

Since entries are only added to the list and never deleted, use list_for_each_entry_lockless() instead of list_for_each_entry_rcu for traversing the list. Also, add a relevant comment in evm_secfs.c to indicate this fact.

Reported-by: kernel test robot lkp@intel.com Suggested-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Madhuparna Bhowmik madhuparnabhowmik10@gmail.com Acked-by: Paul E. McKenney paulmck@kernel.org (RCU viewpoint) Signed-off-by: Mimi Zohar zohar@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/integrity/evm/evm_crypto.c | 2 +- security/integrity/evm/evm_main.c | 4 ++-- security/integrity/evm/evm_secfs.c | 9 ++++++++- 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index cc826c2767a3..fbc2ee6d46fc 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -209,7 +209,7 @@ static int evm_calc_hmac_or_hash(struct dentry *dentry, data->hdr.length = crypto_shash_digestsize(desc->tfm);

error = -ENODATA; - list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) { + list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) { bool is_ima = false;

if (strcmp(xattr->name, XATTR_NAME_IMA) == 0) diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c index f9a81b187fae..a2c393385db0 100644 --- a/security/integrity/evm/evm_main.c +++ b/security/integrity/evm/evm_main.c @@ -99,7 +99,7 @@ static int evm_find_protected_xattrs(struct dentry *dentry) if (!(inode->i_opflags & IOP_XATTR)) return -EOPNOTSUPP;

- list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) { + list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) { error = __vfs_getxattr(dentry, inode, xattr->name, NULL, 0); if (error < 0) { if (error == -ENODATA) @@ -230,7 +230,7 @@ static int evm_protected_xattr(const char *req_xattr_name) struct xattr_list *xattr;

namelen = strlen(req_xattr_name); - list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) { + list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) { if ((strlen(xattr->name) == namelen) && (strncmp(req_xattr_name, xattr->name, namelen) == 0)) { found = 1; diff --git a/security/integrity/evm/evm_secfs.c b/security/integrity/evm/evm_secfs.c index c11c1f7b3ddd..0f37ef27268d 100644 --- a/security/integrity/evm/evm_secfs.c +++ b/security/integrity/evm/evm_secfs.c @@ -234,7 +234,14 @@ static ssize_t evm_write_xattrs(struct file *file, const char __user *buf, goto out; }

- /* Guard against races in evm_read_xattrs */ + /* + * xattr_list_mutex guards against races in evm_read_xattrs(). + * Entries are only added to the evm_config_xattrnames list + * and never deleted. Therefore, the list is traversed + * using list_for_each_entry_lockless() without holding + * the mutex in evm_calc_hmac_or_hash(), evm_find_protected_xattrs() + * and evm_protected_xattr(). + */ mutex_lock(&xattr_list_mutex); list_for_each_entry(tmp, &evm_config_xattrnames, list) { if (strcmp(xattr->name, tmp->name) == 0) {

From: Atsushi Nemoto atsushi.nemoto@sord.co.jp

[ Upstream commit 5d4c7977499a736f3f80826bdc9744344ad55589 ]

Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr().

This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later.

Signed-off-by: Atsushi Nemoto atsushi.nemoto@sord.co.jp Acked-by: Thor Thayer thor.thayer@linux.intel.com [wsa: updated commit message] Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-altera.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c index 92d2c706c2a7..a60042431370 100644 --- a/drivers/i2c/busses/i2c-altera.c +++ b/drivers/i2c/busses/i2c-altera.c @@ -70,6 +70,7 @@ * @isr_mask: cached copy of local ISR enables. * @isr_status: cached copy of local ISR status. * @lock: spinlock for IRQ synchronization. + * @isr_mutex: mutex for IRQ thread. */ struct altr_i2c_dev { void __iomem *base; @@ -86,6 +87,7 @@ struct altr_i2c_dev { u32 isr_mask; u32 isr_status; spinlock_t lock; /* IRQ synchronization */ + struct mutex isr_mutex; };

static void @@ -245,10 +247,11 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev) struct altr_i2c_dev *idev = _dev; u32 status = idev->isr_status;

+ mutex_lock(&idev->isr_mutex); if (!idev->msg) { dev_warn(idev->dev, "unexpected interrupt\n"); altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); - return IRQ_HANDLED; + goto out; } read = (idev->msg->flags & I2C_M_RD) != 0;

@@ -301,6 +304,8 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev) complete(&idev->msg_complete); dev_dbg(idev->dev, "Message Complete\n"); } +out: + mutex_unlock(&idev->isr_mutex);

return IRQ_HANDLED; } @@ -312,6 +317,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) u32 value; u8 addr = i2c_8bit_addr_from_msg(msg);

+ mutex_lock(&idev->isr_mutex); idev->msg = msg; idev->msg_len = msg->len; idev->buf = msg->buf; @@ -336,6 +342,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) altr_i2c_int_enable(idev, imask, true); altr_i2c_fill_tx_fifo(idev); } + mutex_unlock(&idev->isr_mutex);

time_left = wait_for_completion_timeout(&idev->msg_complete, ALTR_I2C_XFER_TIMEOUT); @@ -409,6 +416,7 @@ static int altr_i2c_probe(struct platform_device *pdev) idev->dev = &pdev->dev; init_completion(&idev->msg_complete); spin_lock_init(&idev->lock); + mutex_init(&idev->isr_mutex);

ret = device_property_read_u32(idev->dev, "fifo-size", &idev->fifo_size);

From: Roman Mashak mrv@mojatatu.com

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set to 0. Value of zero means "new action, not yet used"; as a packet hits the action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo") Cc: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: Roman Mashak mrv@mojatatu.com Acked-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/act_api.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/net/act_api.h b/include/net/act_api.h index b18c699681ca..59d05feecfb8 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -69,7 +69,8 @@ static inline void tcf_tm_dump(struct tcf_t *dtm, const struct tcf_t *stm) { dtm->install = jiffies_to_clock_t(jiffies - stm->install); dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse); - dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse); + dtm->firstuse = stm->firstuse ? + jiffies_to_clock_t(jiffies - stm->firstuse) : 0; dtm->expires = jiffies_to_clock_t(stm->expires); }

From: Nathan Chancellor natechancellor@gmail.com

[ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ]

When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset:

arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL && ^~~~~~~~~~~ ~~~~ arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) ^~~~~~~~~~~ ~~~~ 2 warnings generated.

Commit

f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")

added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value.

Reported-by: Sedat Dilek sedat.dilek@gmail.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Acked-by: Steven Rostedt (VMware) rostedt@goodmis.org Link: https://github.com/ClangBuiltLinux/linux/issues/982 Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/mmio-mod.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index b8ef8557d4b3..2a36902d418c 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -372,7 +372,7 @@ static void enter_uniprocessor(void) int cpu; int err;

- if (downed_cpus == NULL && + if (!cpumask_available(downed_cpus) && !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) { pr_notice("Failed to allocate mask\n"); goto out; @@ -402,7 +402,7 @@ static void leave_uniprocessor(void) int cpu; int err;

- if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) + if (!cpumask_available(downed_cpus) || cpumask_weight(downed_cpus) == 0) return; pr_notice("Re-enabling CPUs...\n"); for_each_cpu(cpu, downed_cpus) {

From: Marc Payne marc.payne@mdpsys.co.uk

[ Upstream commit c27a204383616efba5a4194075e90819961ff66a ]

Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to Ethernet and USB Adapter' and may be used as a component of other devices in future. Tested and working with the r8152 driver.

Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend' issue which this device will cause (personally confirmed).

Signed-off-by: Marc Payne marc.payne@mdpsys.co.uk Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/cdc_ether.c | 11 +++++++++-- drivers/net/usb/r8152.c | 1 + 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index fe630438f67b..9bb37ac99a10 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -808,14 +808,21 @@ static const struct usb_device_id products[] = { .driver_info = 0, },

-/* Microsoft Surface 3 dock (based on Realtek RTL8153) */ +/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */ { USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), .driver_info = 0, },

- /* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */ +/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */ +{ + USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + +/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */ { USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 44ea5dcc43fd..cd1a07175e11 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5837,6 +5837,7 @@ static const struct usb_device_id rtl8152_table[] = { {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)}, {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)}, + {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)}, {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3062)},

From: Gerald Schaefer gerald.schaefer@de.ibm.com

[ Upstream commit ac8372f3b4e41015549b331a4f350224661e7fc6 ]

On s390, the layout of normal and large ptes (i.e. pmds/puds) differs. Therefore, set_huge_pte_at() does a conversion from a normal pte to the corresponding large pmd/pud. So, when converting an empty pte, this should result in an empty pmd/pud, which would return true for pmd/pud_none().

However, after conversion we also mark the pmd/pud as large, and therefore present. For empty ptes, this will result in an empty pmd/pud that is also marked as large, and pmd/pud_none() would not return true.

There is currently no issue with this behaviour, as set_huge_pte_at() does not seem to be called for empty ptes. It would be valid though, so let's fix this by not marking empty ptes as large in set_huge_pte_at().

This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add more arch page table helper tests").

Signed-off-by: Gerald Schaefer gerald.schaefer@de.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/mm/hugetlbpage.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c index 5674710a4841..7dfae86afa47 100644 --- a/arch/s390/mm/hugetlbpage.c +++ b/arch/s390/mm/hugetlbpage.c @@ -159,10 +159,13 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, rste &= ~_SEGMENT_ENTRY_NOEXEC;

/* Set correct table type for 2G hugepages */ - if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) - rste |= _REGION_ENTRY_TYPE_R3 | _REGION3_ENTRY_LARGE; - else + if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) { + if (likely(pte_present(pte))) + rste |= _REGION3_ENTRY_LARGE; + rste |= _REGION_ENTRY_TYPE_R3; + } else if (likely(pte_present(pte))) rste |= _SEGMENT_ENTRY_LARGE; + clear_huge_pte_skeys(mm, rste); pte_val(*ptep) = rste; }

From: Russell King rmk+kernel@armlinux.org.uk

[ Upstream commit 3138a07ce219acde4c0d7ea0b6d54ba64153328b ]

When rxhash is enabled on any ethernet port except the first in each CP block, traffic flow is prevented. The analysis is below:

I've been investigating this afternoon, and what I've found, comparing a kernel without 895586d5dc32 and with 895586d5dc32 applied is:

- The table programmed into the hardware via mvpp22_rss_fill_table() appears to be identical with or without the commit.

- When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports that c2.attr[0] and c2.attr[2] are written back containing:

- with 895586d5dc32, failing: 00200000 40000000 - without 895586d5dc32, working: 04000000 40000000

- When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:

04000000 00000000

The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the first value is the queue number, which comprises two fields. The high 5 bits are 24:29 and the low three are 21:23 inclusive. This comes from:

c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) | MVPP22_CLS_C2_ATTR0_QLOW(ql);

So, the working case gives eth2 a queue id of 4.0, or 32 as per port->first_rxq, and the non-working case a queue id of 0.1, or 1. The allocation of queue IDs seems to be in mvpp2_port_probe():

if (priv->hw_version == MVPP21) port->first_rxq = port->id * port->nrxqs; else port->first_rxq = port->id * priv->max_port_rxqs;

Where:

if (priv->hw_version == MVPP21) priv->max_port_rxqs = 8; else priv->max_port_rxqs = 32;

Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1 (eth2) be 32. It seems the idea is that the first 32 queues belong to port 0, the second 32 queues belong to port 1, etc.

mvpp2_rss_port_c2_enable() gets the queue number from it's parameter, 'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns port->rss_ctx[0].

mvpp22_rss_context_create() is responsible for allocating that, which it does by looking for an unallocated priv->rss_tables[] pointer. This table is shared amongst all ports on the CP silicon.

When we write the tables in mvpp22_rss_fill_table(), the RSS table entry is defined by:

u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) | MVPP22_RSS_INDEX_TABLE_ENTRY(i);

where rss_ctx is the context ID (queue number) and i is the index in the table.

If we look at what is written:

- The first table to be written has "sel" values of 00000000..0000001f, containing values 0..3. This appears to be for eth1. This is table 0, RX queue number 0. - The second table has "sel" values of 00000100..0000011f, and appears to be for eth2. These contain values 0x20..0x23. This is table 1, RX queue number 0. - The third table has "sel" values of 00000200..0000021f, and appears to be for eth3. These contain values 0x40..0x43. This is table 2, RX queue number 0.

How do queue numbers translate to the RSS table? There is another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE register. Before 895586d5dc32, it was:

mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(port->first_rxq)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(port->id));

and after:

mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));

Before the commit, for eth2, that would've contained '32' for the index and '1' for the table pointer - mapping queue 32 to table 1. Remember that this is queue-high.queue-low of 4.0.

After the commit, we appear to map queue 1 to table 1. That again looks fine on the face of it.

Section 9.3.1 of the A8040 manual seems indicate the reason that the queue number is separated. queue-low seems to always come from the classifier, whereas queue-high can be from the ingress physical port number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.

We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to be where our bug comes from.

mvpp2_cls_oversize_rxq_set() sets this up as:

mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id), (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));

val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG); val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);

Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high for eth2 is _always_ 4, so only queues 32 through 39 inclusive are available to eth2. Yet, we're trying to tell the classifier to set queue-high, which will be ignored, to zero. Hence, the queue-high field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be ignored.

This means we end up directing traffic from eth2 not to queue 1, but to queue 33, and then we tell it to look up queue 33 in the RSS table. However, RSS table has not been programmed for queue 33, and so it ends up (presumably) dropping the packets.

It seems that mvpp22_rss_context_create() doesn't take account of the fact that the upper 5 bits of the queue ID can't actually be changed due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either way, these two functions mutually disagree with what queue number should be used.

Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used for over-sized packets attempting to egress through this port. With the classifier having had RSS enabled and directing eth2 traffic to queue 1, we may still have packets appearing on queue 32 for this port.

However, the only way we may end up with over-sized packets attempting to egress through eth2 - is if the A8040 forwards frames between its ports. From what I can see, we don't support that feature, and the kernel restricts the egress packet size to the MTU. In any case, if we were to attempt to transmit an oversized packet, we have no support in the kernel to deal with that appearing in the port's receive queue.

So, this patch attempts to solve the issue by clearing the MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH() from the classifier to define the queue-high field of the queue number.

My testing seems to confirm my findings above - clearing this bit means that if I enable rxhash on eth2, the interface can then pass traffic, as we are now directing traffic to RX queue 1 rather than queue 33. Traffic still seems to work with rxhash off as well.

Reported-by: Matteo Croce mcroce@redhat.com Tested-by: Matteo Croce mcroce@redhat.com Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c index 4344a59c823f..6122057d60c0 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c @@ -1070,7 +1070,7 @@ void mvpp2_cls_oversize_rxq_set(struct mvpp2_port *port) (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));

val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG); - val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); + val &= ~MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val); }

From: Jonathan McDowell noodles@earth.li

[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]

The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like:

[ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed

This patch, a slightly cleaned up version of one posted by Sergey Sergeev in:

https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257

correctly enables the clock; we have already configured the source just before this.

Tested on a MikroTik RB3011.

Signed-off-by: Jonathan McDowell noodles@earth.li Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index 0d21082ceb93..4d75158c64b2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -318,6 +318,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) /* Enable PTP clock */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); + break; + case PHY_INTERFACE_MODE_SGMII: + val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); + break; + default: + /* We don't get here; the switch above will have errored out */ + unreachable(); + } regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);

if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {

From: Qiushi Wu wu000273@umn.edu

[ Upstream commit 5a730153984dd13f82ffae93d7170d76eba204e9 ]

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res".

Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sun/cassini.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index c91876f8c536..6e78a33aa5e4 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -4971,7 +4971,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) cas_cacheline_size)) { dev_err(&pdev->dev, "Could not set PCI cache " "line size\n"); - goto err_write_cacheline; + goto err_out_free_res; } } #endif @@ -5144,7 +5144,6 @@ err_out_iounmap: err_out_free_res: pci_release_regions(pdev);

-err_write_cacheline: /* Try to restore it in case the error occurred after we * set it. */

From: Roi Dayan roid@mellanox.com

[ Upstream commit a16b8e0dcf7043bee46174bed0553cc9e36b63a5 ]

In the cited commit inner_tirs argument was added to create and destroy inner tirs, and no indication was added to mlx5e_modify_tirs_hash() function. In order to have a consistent handling, use inner_indir_tir[0].tirn in tirs destroy/modify function as an indication to whether inner tirs are created. Inner tirs are not created for representors and before this commit, a call to mlx5e_modify_tirs_hash() was sending HW commands to modify non-existent inner tirs.

Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs") Signed-off-by: Roi Dayan roid@mellanox.com Reviewed-by: Vlad Buslov vladbu@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 12 +++++++----- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 4 ++-- .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 4 ++-- 4 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 38aa55638bbe..98304c42e495 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -1103,7 +1103,7 @@ void mlx5e_close_drop_rq(struct mlx5e_rq *drop_rq); int mlx5e_create_indirect_rqt(struct mlx5e_priv *priv);

int mlx5e_create_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc); -void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc); +void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv);

int mlx5e_create_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs); void mlx5e_destroy_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 0e340893ca00..c133beb6a7a5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2758,7 +2758,8 @@ void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen) mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in, inlen); }

- if (!mlx5e_tunnel_inner_ft_supported(priv->mdev)) + /* Verify inner tirs resources allocated */ + if (!priv->inner_indir_tir[0].tirn) return;

for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++) { @@ -3405,14 +3406,15 @@ out: return err; }

-void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc) +void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv) { int i;

for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++) mlx5e_destroy_tir(priv->mdev, &priv->indir_tir[i]);

- if (!inner_ttc || !mlx5e_tunnel_inner_ft_supported(priv->mdev)) + /* Verify inner tirs resources allocated */ + if (!priv->inner_indir_tir[0].tirn) return;

for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++) @@ -5119,7 +5121,7 @@ err_destroy_xsk_rqts: err_destroy_direct_tirs: mlx5e_destroy_direct_tirs(priv, priv->direct_tir); err_destroy_indirect_tirs: - mlx5e_destroy_indirect_tirs(priv, true); + mlx5e_destroy_indirect_tirs(priv); err_destroy_direct_rqts: mlx5e_destroy_direct_rqts(priv, priv->direct_tir); err_destroy_indirect_rqts: @@ -5138,7 +5140,7 @@ static void mlx5e_cleanup_nic_rx(struct mlx5e_priv *priv) mlx5e_destroy_direct_tirs(priv, priv->xsk_tir); mlx5e_destroy_direct_rqts(priv, priv->xsk_tir); mlx5e_destroy_direct_tirs(priv, priv->direct_tir); - mlx5e_destroy_indirect_tirs(priv, true); + mlx5e_destroy_indirect_tirs(priv); mlx5e_destroy_direct_rqts(priv, priv->direct_tir); mlx5e_destroy_rqt(priv, &priv->indir_rqt); mlx5e_close_drop_rq(&priv->drop_rq); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index fddf644ba349..9b232ef36d53 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -1597,7 +1597,7 @@ err_destroy_ttc_table: err_destroy_direct_tirs: mlx5e_destroy_direct_tirs(priv, priv->direct_tir); err_destroy_indirect_tirs: - mlx5e_destroy_indirect_tirs(priv, false); + mlx5e_destroy_indirect_tirs(priv); err_destroy_direct_rqts: mlx5e_destroy_direct_rqts(priv, priv->direct_tir); err_destroy_indirect_rqts: @@ -1614,7 +1614,7 @@ static void mlx5e_cleanup_rep_rx(struct mlx5e_priv *priv) mlx5_del_flow_rules(rpriv->vport_rx_rule); mlx5e_destroy_ttc_table(priv, &priv->fs.ttc); mlx5e_destroy_direct_tirs(priv, priv->direct_tir); - mlx5e_destroy_indirect_tirs(priv, false); + mlx5e_destroy_indirect_tirs(priv); mlx5e_destroy_direct_rqts(priv, priv->direct_tir); mlx5e_destroy_rqt(priv, &priv->indir_rqt); mlx5e_close_drop_rq(&priv->drop_rq); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 3ed8ab2d703d..0fed2419623d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -396,7 +396,7 @@ static int mlx5i_init_rx(struct mlx5e_priv *priv) err_destroy_direct_tirs: mlx5e_destroy_direct_tirs(priv, priv->direct_tir); err_destroy_indirect_tirs: - mlx5e_destroy_indirect_tirs(priv, true); + mlx5e_destroy_indirect_tirs(priv); err_destroy_direct_rqts: mlx5e_destroy_direct_rqts(priv, priv->direct_tir); err_destroy_indirect_rqts: @@ -412,7 +412,7 @@ static void mlx5i_cleanup_rx(struct mlx5e_priv *priv) { mlx5i_destroy_flow_steering(priv); mlx5e_destroy_direct_tirs(priv, priv->direct_tir); - mlx5e_destroy_indirect_tirs(priv, true); + mlx5e_destroy_indirect_tirs(priv); mlx5e_destroy_direct_rqts(priv, priv->direct_tir); mlx5e_destroy_rqt(priv, &priv->indir_rqt); mlx5e_close_drop_rq(&priv->drop_rq);

From: Moshe Shemesh moshe@mellanox.com

[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ]

On sq closure when we free its descriptors, we should also update netdev txq on completions which would not arrive. Otherwise if we reopen sqs and attach them back, for example on fw fatal recovery flow, we may get tx timeout.

Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close") Signed-off-by: Moshe Shemesh moshe@mellanox.com Reviewed-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index dee12f17f9c2..d9e0fc146741 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -537,10 +537,9 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq) { struct mlx5e_tx_wqe_info *wi; + u32 dma_fifo_cc, nbytes = 0; + u16 ci, sqcc, npkts = 0; struct sk_buff *skb; - u32 dma_fifo_cc; - u16 sqcc; - u16 ci; int i;

sqcc = sq->cc; @@ -565,11 +564,15 @@ void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq) }

dev_kfree_skb_any(skb); + npkts++; + nbytes += wi->num_bytes; sqcc += wi->num_wqebbs; }

sq->dma_fifo_cc = dma_fifo_cc; sq->cc = sqcc; + + netdev_tx_completed_queue(sq->txq, npkts, nbytes); }

#ifdef CONFIG_MLX5_CORE_IPOIB

From: Grygorii Strashko grygorii.strashko@ti.com

[ Upstream commit 4c64b83d03f4aafcdf710caad994cbc855802e74 ]

vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL();

Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.

Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko grygorii.strashko@ti.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ti/cpsw.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index d7a953c647b4..39df8c8feb6c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2999,11 +2999,15 @@ static int cpsw_suspend(struct device *dev) struct cpsw_common *cpsw = dev_get_drvdata(dev); int i;

+ rtnl_lock(); + for (i = 0; i < cpsw->data.slaves; i++) if (cpsw->slaves[i].ndev) if (netif_running(cpsw->slaves[i].ndev)) cpsw_ndo_stop(cpsw->slaves[i].ndev);

+ rtnl_unlock(); + /* Select sleep pin state */ pinctrl_pm_select_sleep_state(dev);

From: Dinghao Liu dinghao.liu@zju.edu.cn

[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ]

Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced.

Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/smsc/smsc911x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 38068fc34141..c7bdada4d1b9 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2502,20 +2502,20 @@ static int smsc911x_drv_probe(struct platform_device *pdev)

retval = smsc911x_init(dev); if (retval < 0) - goto out_disable_resources; + goto out_init_fail;

netif_carrier_off(dev);

retval = smsc911x_mii_init(pdev, dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_disable_resources; + goto out_init_fail; }

retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); - goto out_disable_resources; + goto out_init_fail; } else { SMSC_TRACE(pdata, probe, "Network interface: "%s"", dev->name); @@ -2556,9 +2556,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)

return 0;

-out_disable_resources: +out_init_fail: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); +out_disable_resources: (void)smsc911x_disable_resources(pdev); out_enable_resources_fail: smsc911x_free_resources(pdev);