This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.4.3-rc2.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.4.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.4.3-rc2
Suren Baghdasaryan surenb@google.com fork: lock VMAs of the parent process when forking
Liu Shixin liushixin2@huawei.com bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
Peter Collingbourne pcc@google.com mm: call arch_swap_restore() from do_swap_page()
Hugh Dickins hughd@google.com mm: lock newly mapped VMA with corrected ordering
Suren Baghdasaryan surenb@google.com mm: lock newly mapped VMA which can be modified after it becomes visible
Suren Baghdasaryan surenb@google.com mm: lock a vma before stack expansion
-------------
Diffstat:
Makefile | 4 ++-- include/linux/bootmem_info.h | 2 ++ kernel/fork.c | 1 + mm/memory.c | 7 +++++++ mm/mmap.c | 6 ++++++ 5 files changed, 18 insertions(+), 2 deletions(-)
On Sun, Jul 09, 2023 at 10:45:16PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Successfully compiled and installed bindeb-pkgs on my computer (Acer Aspire E15, Intel Core i3 Haswell). No noticeable regressions.
Tested-by: Bagas Sanjaya bagasdotme@gmail.com
On Mon, 10 Jul 2023 at 02:15, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.4.3-rc2.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.4.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
NOTE: Following two issues are not specific to this round of review, We have been noticing on stable-rc 6.4.1-rc1 release with kselftest merge configs builds testing selftests: net tests.
1) While running selftests: net: pmtu.sh on arm64 ARM juno-r2, qemu-arm64 and Raspberry Pi 4 Model B following kernel crash reported.
# selftests: net: pmtu.sh # TEST: ipv4: PMTU exceptions [ OK ] # TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] # TEST: ipv6: PMTU exceptions [FAIL] # PMTU exception wasn't created after exceeding MTU # TEST: ipv6: PMTU exceptions - nexthop objects [FAIL] # PMTU exception wasn't created after exceeding MTU # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ] # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions - nexthop objects [ OK ] # TEST: UDPv4 with DSCP and ECN: PMTU exceptions [ OK ] # TEST: UDPv4 with DSCP and ECN: PMTU exceptions - nexthop objects [ OK ] # TEST: IPv4 over vxlan4: PMTU exceptions [ OK ] # TEST: IPv4 over vxlan4: PMTU exceptions - nexthop objects [ OK ] # TEST: IPv6 over vxlan4: PMTU exceptions [FAIL] # PMTU exception wasn't created after exceeding link layer MTU on vxlan interface # TEST: IPv6 over vxlan4: PMTU exceptions - nexthop objects [FAIL] # PMTU exception wasn't created after exceeding link layer MTU on vxlan interface # TEST: IPv4 over vxlan6: PMTU exceptions [ OK ] [ 226.478625] Unable to handle kernel paging request at virtual address ffff800974529000 [ 226.486721] Mem abort info: [ 226.489534] ESR = 0x0000000096000005 [ 226.493304] EC = 0x25: DABT (current EL), IL = 32 bits [ 226.498643] SET = 0, FnV = 0 [ 226.501716] EA = 0, S1PTW = 0 [ 226.504876] FSC = 0x05: level 1 translation fault [ 226.509778] Data abort info: [ 226.512675] ISV = 0, ISS = 0x00000005 [ 226.516531] CM = 0, WnR = 0 [ 226.519518] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082721000 [ 226.526249] [ffff800974529000] pgd=10000009fffff003, p4d=10000009fffff003, pud=0000000000000000 [ 226.535343] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 226.541633] Modules linked in: act_csum libcrc32c act_pedit cls_flower sch_prio bpfilter ip_tables x_tables veth macvtap tap tun cfg80211 bluetooth rfkill tda998x hdlcd cec drm_dma_helper onboard_usb_hub drm_kms_helper crct10dif_ce sch_fq_codel fuse drm [last unloaded: test_blackhole_dev] [ 226.567412] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.3-rc2 #1 [ 226.573614] Hardware name: ARM Juno development board (r2) (DT) [ 226.579549] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 226.586534] pc : percpu_counter_add_batch+0x40/0x148 [ 226.591529] lr : percpu_counter_add_batch+0x124/0x148 [ 226.596603] sp : ffff800008003dc0 [ 226.599926] x29: ffff800008003dc0 x28: ffff80000b282040 x27: ffff800008199b00 [ 226.607101] x26: ffff800008199ab4 x25: 0000000000000000 x24: ffff80000b318888 [ 226.614275] x23: ffff80000b274b80 x22: 0000000000000020 x21: 0000000000000000 [ 226.621449] x20: ffffffffffffffff x19: ffff00082892d740 x18: 0000000000000000 [ 226.628623] x17: ffff800974529000 x16: 0000000000000000 x15: 00000000000001da [ 226.635796] x14: 0000000000000400 x13: ffff8009745ce000 x12: 0000000000000000 [ 226.642969] x11: ffff80000a7cac24 x10: 0000000000000000 x9 : ffff8000094984cc [ 226.650143] x8 : ffff800008003cd8 x7 : 0000000000000000 x6 : 0000000000000101 [ 226.657317] x5 : 0000000000000000 x4 : ffff800008003da0 x3 : 0000000000000000 [ 226.664489] x2 : 0000000100000101 x1 : ffff800974529000 x0 : 0000000000000000 [ 226.671663] Call trace: [ 226.674116] percpu_counter_add_batch+0x40/0x148 [ 226.678756] dst_destroy+0x18c/0x240 [ 226.682351] dst_destroy_rcu+0x24/0x40 [ 226.686118] rcu_core+0x464/0xe80 [ 226.689453] rcu_core_si+0x18/0x30 [ 226.692872] __do_softirq+0x130/0x4f4 [ 226.696549] ____do_softirq+0x18/0x30 [ 226.700228] call_on_irq_stack+0x24/0x58 [ 226.704167] do_softirq_own_stack+0x24/0x38 [ 226.708367] __irq_exit_rcu+0x17c/0x1b0 [ 226.712220] irq_exit_rcu+0x18/0x48 [ 226.715723] el1_interrupt+0x38/0x68 [ 226.719314] el1h_64_irq_handler+0x18/0x28 [ 226.723426] el1h_64_irq+0x64/0x68 [ 226.726841] cpuidle_enter_state+0x148/0x5b0 [ 226.731129] cpuidle_enter+0x40/0x60 [ 226.734723] do_idle+0x22c/0x2b8 [ 226.737970] cpu_startup_entry+0x30/0x40 [ 226.741912] rest_init+0x114/0x1c0 [ 226.745329] arch_call_rest_init+0x18/0x20 [ 226.749444] start_kernel+0x5e0/0x6f8 [ 226.753121] __primary_switched+0xbc/0xd0 [ 226.757152] Code: 927902b9 36380775 d538d081 f9402e60 (b8616817) [ 226.763268] ---[ end trace 0000000000000000 ]--- [ 226.767898] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 226.774790] SMP: stopping secondary CPUs [ 226.778932] Kernel Offset: disabled [ 226.782428] CPU features: 0x800004,18780800,0000421b [ 226.787408] Memory Limit: none [ 226.790479] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Links: - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-... - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-... - https://lkft.validation.linaro.org/scheduler/job/6578667#L4613 - https://storage.tuxsuite.com/public/linaro/lkft/builds/2SLr5Fizk6DFnf66nxHoL...
And
2) While running selftests: net: vrf-xfrm-tests.sh on arm64 Raspberry Pi 4 Model B and arm64 Qualcomm Technologies APQ 8016 SBC devices.
# selftests: net: vrf-xfrm-tests.sh
# # No qdisc on VRF device # TEST: IPv6 no xfrm policy [ OK ] # Cannot open netlink socket: Protocol not supported [ 3310.312970] audit: type=1334 audit(1651171022.511:197): prog-id=59 op=LOAD # TEST: IPv4 xfrm policy based on address [ OK ] # TEST: IPv6 xfrm policy based on address [ OK ] # Cannot open netlink socket: Protocol not supported # TEST: IPv6 xfrm policy with VRF in selector [ OK ] # TEST: IPv4 xfrm policy with xfrm device [FAIL] # TEST: IPv6 xfrm policy with xfrm device [FAIL] # # netem qdisc on VRF device # Cannot open netlink socket: Protocol not supported ... [ 3326.099841] [ 3326.108605] ============================= [ 3326.117159] WARNING: suspicious RCU usage [ 3326.125672] 6.4.3-rc2 #1 Not tainted [ 3326.134070] ----------------------------- [ 3326.142459] include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! [ 3326.150984] [ 3326.150984] other info that might help us debug this: [ 3326.150984] [ 3326.175738] [ 3326.175738] rcu_scheduler_active = 2, debug_locks = 1 [ 3326.192048] 2 locks held by ping/19436: [ 3326.200354] #0: ffff00000bce3570 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x25c/0xf18 [ 3326.208962] #1: ffff80000b397b98 (rcu_read_lock_bh){....}-{1:2}, at: vrf_finish_output+0x70/0x8d0 [ 3326.217663] [ 3326.217663] stack backtrace: [ 3326.234476] CPU: 1 PID: 19436 Comm: ping Not tainted 6.4.3-rc2 #1 [ 3326.243032] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 3326.251626] Call trace: [ 3326.260137] dump_backtrace+0xa0/0x128 [ 3326.268713] show_stack+0x30/0x48 [ 3326.277235] dump_stack_lvl+0x90/0xb0 [ 3326.285718] dump_stack+0x18/0x28 [ 3326.294123] lockdep_rcu_suspicious+0x16c/0x230 [ 3326.302589] vrf_finish_output+0x664/0x8d0 [ 3326.311049] vrf_output+0x104/0x410 [ 3326.319488] ip_send_skb+0x60/0x128 [ 3326.327928] ip_push_pending_frames+0x44/0x70 [ 3326.336395] raw_sendmsg+0x584/0xf18 [ 3326.344815] inet_sendmsg+0x50/0x88 [ 3326.353251] __sys_sendto+0xfc/0x198 [ 3326.361650] __arm64_sys_sendto+0x34/0x50 [ 3326.369890] invoke_syscall+0x8c/0x120 [ 3326.377899] el0_svc_common.constprop.0+0x104/0x130 [ 3326.385824] do_el0_svc+0x44/0xb8 [ 3326.393644] el0_svc+0x40/0xa8 [ 3326.401277] el0t_64_sync_handler+0xbc/0x138 [ 3326.408721] el0t_64_sync+0x190/0x198 [ 3326.416111] [ 3326.423395] ============================= [ 3326.430605] WARNING: suspicious RCU usage [ 3326.437613] 6.4.3-rc2 #1 Not tainted [ 3326.444481] ----------------------------- [ 3326.451275] include/net/neighbour.h:307 suspicious rcu_dereference_check() usage! [ 3326.458148] [ 3326.458148] other info that might help us debug this: [ 3326.458148] [ 3326.477416] [ 3326.477416] rcu_scheduler_active = 2, debug_locks = 1 [ 3326.489637] 2 locks held by ping/19436: [ 3326.495704] #0: ffff00000bce3570 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x25c/0xf18 [ 3326.501817] #1: ffff80000b397b98 (rcu_read_lock_bh){....}-{1:2}, at: vrf_finish_output+0x70/0x8d0 [ 3326.509274] [ 3326.509274] stack backtrace: [ 3326.523226] CPU: 1 PID: 19436 Comm: ping Not tainted 6.4.3-rc2 #1 [ 3326.528565] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 3326.533774] Call trace: [ 3326.540093] dump_backtrace+0xa0/0x128 [ 3326.545130] show_stack+0x30/0x48 [ 3326.550107] dump_stack_lvl+0x90/0xb0 [ 3326.554925] dump_stack+0x18/0x28 [ 3326.559493] lockdep_rcu_suspicious+0x16c/0x230 [ 3326.563974] vrf_finish_output+0x618/0x8d0 [ 3326.568383] vrf_output+0x104/0x410 [ 3326.572598] ip_send_skb+0x60/0x128 [ 3326.576589] ip_push_pending_frames+0x44/0x70 [ 3326.580477] raw_sendmsg+0x584/0xf18 [ 3326.584239] inet_sendmsg+0x50/0x88 [ 3326.587983] __sys_sendto+0xfc/0x198 [ 3326.591723] __arm64_sys_sendto+0x34/0x50 [ 3326.595464] invoke_syscall+0x8c/0x120 [ 3326.599199] el0_svc_common.constprop.0+0x104/0x130 [ 3326.602929] do_el0_svc+0x44/0xb8 [ 3326.606753] el0_svc+0x40/0xa8 [ 3326.610378] el0t_64_sync_handler+0xbc/0x138 [ 3326.614029] el0t_64_sync+0x190/0x198 # TEST: IPv4 no xfrm policy [ OK ]
Links: - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-... - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-... - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-...
metadata: git_ref: linux-6.4.y git_repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git_sha: 3e37df3ffd9a648c9f88f6bbca158e43d5077bef git_describe: v6.4.1-22-g3e37df3ffd9a kernel_version: 6.4.3-rc2 kernel-config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2SLr5Fizk6DFnf66nxHoL... artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2SLr5Fizk6DFnf66nxHoL... toolchain: gcc-11
## Build * kernel: 6.4.3-rc2 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-6.4.y * git commit: 3e37df3ffd9a648c9f88f6bbca158e43d5077bef * git describe: v6.4.1-22-g3e37df3ffd9a * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.4.y/build/v6.4.1-...
## Test Regressions (compared to v6.4.1)
## Metric Regressions (compared to v6.4.1)
## Test Fixes (compared to v6.4.1)
## Metric Fixes (compared to v6.4.1)
## Test result summary total: 173253, pass: 148435, fail: 2272, skip: 22546, xfail: 0
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 145 total, 145 passed, 0 failed * arm64: 54 total, 53 passed, 1 failed * i386: 41 total, 41 passed, 0 failed * mips: 30 total, 28 passed, 2 failed * parisc: 4 total, 4 passed, 0 failed * powerpc: 38 total, 36 passed, 2 failed * riscv: 26 total, 25 passed, 1 failed * s390: 16 total, 14 passed, 2 failed * sh: 14 total, 12 passed, 2 failed * sparc: 8 total, 8 passed, 0 failed * x86_64: 46 total, 46 passed, 0 failed
## Test suites summary * boot * fwts * kselftest-android * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-user_events * kselftest-vDSO * kselftest-watchdog * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * perf * rcutorture * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
On Mon, 10 Jul 2023 17:11:18 +0530 Naresh Kamboju wrote:
git_repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git_sha: 3e37df3ffd9a648c9f88f6bbca158e43d5077bef
I can't find this sha :( Please report back if you can still repro this and how we get get the relevant code
Hi!
git_repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git_sha: 3e37df3ffd9a648c9f88f6bbca158e43d5077bef
I can't find this sha :( Please report back if you can still repro this and how we get get the relevant code
That sha seems to be:
commit 3e37df3ffd9a648c9f88f6bbca158e43d5077bef Author: Greg Kroah-Hartman gregkh@linuxfoundation.org Date: Sun Jul 9 22:38:22 2023 +0200
Linux 6.4.3-rc2
Best regards, Pavel
On Wed, 12 Jul 2023 at 14:01, Pavel Machek pavel@denx.de wrote:
Hi!
git_repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git_sha: 3e37df3ffd9a648c9f88f6bbca158e43d5077bef
I can't find this sha :( Please report back if you can still repro this and how we get get the relevant code
That sha seems to be:
commit 3e37df3ffd9a648c9f88f6bbca158e43d5077bef Author: Greg Kroah-Hartman gregkh@linuxfoundation.org Date: Sun Jul 9 22:38:22 2023 +0200
Linux 6.4.3-rc2
That is the commit id from stable-rc tree.
I have re-tested the reported issues multiple times and it seems that it is intermittently reproducible. Following list of links shows kernel crashes while testing selftest net pmtu.sh
1) Unable to handle kernel paging request at virtual address https://lkft.validation.linaro.org/scheduler/job/6579624#L4648
2) include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!
https://lkft.validation.linaro.org/scheduler/job/6579625#L7500 https://lkft.validation.linaro.org/scheduler/job/6579626#L7509 https://lkft.validation.linaro.org/scheduler/job/6579622#L7537 https://lkft.validation.linaro.org/scheduler/job/6579623#L7469
- Naresh
On Wed, 12 Jul 2023 18:41:46 +0530 Naresh Kamboju wrote:
That is the commit id from stable-rc tree.
I have re-tested the reported issues multiple times and it seems that it is intermittently reproducible. Following list of links shows kernel crashes while testing selftest net pmtu.sh
Unable to handle kernel paging request at virtual address https://lkft.validation.linaro.org/scheduler/job/6579624#L4648
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!
https://lkft.validation.linaro.org/scheduler/job/6579625#L7500 https://lkft.validation.linaro.org/scheduler/job/6579626#L7509 https://lkft.validation.linaro.org/scheduler/job/6579622#L7537 https://lkft.validation.linaro.org/scheduler/job/6579623#L7469
Nothing jumps out at me.
David, any ideas?
On 7/12/23 12:02 PM, Jakub Kicinski wrote:
On Wed, 12 Jul 2023 18:41:46 +0530 Naresh Kamboju wrote:
That is the commit id from stable-rc tree.
I have re-tested the reported issues multiple times and it seems that it is intermittently reproducible. Following list of links shows kernel crashes while testing selftest net pmtu.sh
Unable to handle kernel paging request at virtual address https://lkft.validation.linaro.org/scheduler/job/6579624#L4648
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!
https://lkft.validation.linaro.org/scheduler/job/6579625#L7500 https://lkft.validation.linaro.org/scheduler/job/6579626#L7509 https://lkft.validation.linaro.org/scheduler/job/6579622#L7537 https://lkft.validation.linaro.org/scheduler/job/6579623#L7469
Nothing jumps out at me.
David, any ideas?
No. Since it is a selftest in the linux repo, any chance for a git bisect based on that one test?
Hello Greg,
From: Greg Kroah-Hartman gregkh@linuxfoundation.org Sent: Sunday, July 9, 2023 9:45 PM
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
Thank you for the release!
CIP configurations built and booted okay with Linux 6.4.3-rc2 (3e37df3ffd9a): https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/92... https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linu...
Tested-by: Chris Paterson (CIP) chris.paterson2@renesas.com
Kind regards, Chris
On Sun, Jul 09, 2023 at 10:45:16PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
Build results: total: 157 pass: 157 fail: 0 Qemu test results: total: 520 pass: 520 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
Hi Greg
On Mon, Jul 10, 2023 at 5:45 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.4.3-rc2.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.4.y and the diffstat can be found below.
thanks,
greg k-h
6.4.3-rc2 tested.
Build successfully completed. Boot successfully completed. No dmesg regressions. Video output normal. Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64), arch linux)
Thanks
Tested-by: Takeshi Ogasawara takeshi.ogasawara@futuring-girl.com
On 7/9/23 1:45 PM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.4.3 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 11 Jul 2023 20:38:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.4.3-rc2.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.4.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
linux-stable-mirror@lists.linaro.org
-
Bagas Sanjaya -
Chris Paterson -
David Ahern -
Greg Kroah-Hartman -
Guenter Roeck -
Jakub Kicinski -
Naresh Kamboju -
ogasawara takeshi -
Pavel Machek -
Ron Economos