From: ChenXiaoSong chenxiaosong2@huawei.com
[ Upstream commit 38c9c22a85aeed28d0831f230136e9cf6fa2ed44 ]
Syzkaller reported use-after-free bug as follows:
================================================================== BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130 Read of size 2 at addr ffff8880751acee8 by task a.out/879
CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c0/0x2b0 print_address_description.constprop.0.cold+0xd4/0x484 print_report.cold+0x55/0x232 kasan_report+0xbf/0xf0 ntfs_ucsncmp+0x123/0x130 ntfs_are_names_equal.cold+0x2b/0x41 ntfs_attr_find+0x43b/0xb90 ntfs_attr_lookup+0x16d/0x1e0 ntfs_read_locked_attr_inode+0x4aa/0x2360 ntfs_attr_iget+0x1af/0x220 ntfs_read_locked_inode+0x246c/0x5120 ntfs_iget+0x132/0x180 load_system_files+0x1cc6/0x3480 ntfs_fill_super+0xa66/0x1cf0 mount_bdev+0x38d/0x460 legacy_get_tree+0x10d/0x220 vfs_get_tree+0x93/0x300 do_new_mount+0x2da/0x6d0 path_mount+0x496/0x19d0 __x64_sys_mount+0x284/0x300 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3f2118d9ea Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00 RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44 R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK>
The buggy address belongs to the physical page: page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac memcg:ffff888101f7e180 anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201 raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180 page dumped because: kasan: bad access detected
Memory state around the buggy address: ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^ ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ==================================================================
The reason is that struct ATTR_RECORD->name_offset is 6485, end address of name string is out of bounds.
Fix this by adding sanity check on end address of attribute name string.
[akpm@linux-foundation.org: coding-style cleanups] [chenxiaosong2@huawei.com: cleanup suggested by Hawkins Jiawei] Link: https://lkml.kernel.org/r/20220709064511.3304299-1-chenxiaosong2@huawei.com Link: https://lkml.kernel.org/r/20220707105329.4020708-1-chenxiaosong2@huawei.com Signed-off-by: ChenXiaoSong chenxiaosong2@huawei.com Signed-off-by: Hawkins Jiawei yin31149@gmail.com Cc: Anton Altaparmakov anton@tuxera.com Cc: ChenXiaoSong chenxiaosong2@huawei.com Cc: Yongqiang Liu liuyongqiang13@huawei.com Cc: Zhang Yi yi.zhang@huawei.com Cc: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs/attrib.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 44a39a099b54..62b49197e5f6 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -606,8 +606,12 @@ static int ntfs_attr_find(const ATTR_TYPE type, const ntfschar *name, a = (ATTR_RECORD*)((u8*)ctx->attr + le32_to_cpu(ctx->attr->length)); for (;; a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))) { - if ((u8*)a < (u8*)ctx->mrec || (u8*)a > (u8*)ctx->mrec + - le32_to_cpu(ctx->mrec->bytes_allocated)) + u8 *mrec_end = (u8 *)ctx->mrec + + le32_to_cpu(ctx->mrec->bytes_allocated); + u8 *name_end = (u8 *)a + le16_to_cpu(a->name_offset) + + a->name_length * sizeof(ntfschar); + if ((u8*)a < (u8*)ctx->mrec || (u8*)a > mrec_end || + name_end > mrec_end) break; ctx->attr = a; if (unlikely(le32_to_cpu(a->type) > le32_to_cpu(type) ||
From: Biju Das biju.das.jz@bp.renesas.com
[ Upstream commit b620aa3a7be346f04ae7789b165937615c6ee8d3 ]
RSPI IP on RZ/{A, G2L} SoC's has the same signal for both interrupt and DMA transfer request. Setting DMARS register for DMA transfer makes the signal to work as a DMA transfer request signal and subsequent interrupt requests to the interrupt controller are masked.
PIO fallback does not work as interrupt signal is disabled.
This patch fixes this issue by re-enabling the interrupts by calling dmaengine_synchronize().
Signed-off-by: Biju Das biju.das.jz@bp.renesas.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20220721143449.879257-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-rspi.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index d61120822f02..ef604e12a428 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -603,6 +603,10 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, rspi->dma_callbacked, HZ); if (ret > 0 && rspi->dma_callbacked) { ret = 0; + if (tx) + dmaengine_synchronize(rspi->ctlr->dma_tx); + if (rx) + dmaengine_synchronize(rspi->ctlr->dma_rx); } else { if (!ret) { dev_err(&rspi->master->dev, "DMA timeout\n");
From: Florian Westphal fw@strlen.de
[ Upstream commit 81ea010667417ef3f218dfd99b69769fe66c2b67 ]
Add explicit rescheduling points during ruleset walk.
Switching to a faster algorithm is possible but this is a much smaller change, suitable for nf tree.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1460 Signed-off-by: Florian Westphal fw@strlen.de Acked-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index ab68076d2cba..a50cdd92f33f 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2550,6 +2550,8 @@ int nft_chain_validate(const struct nft_ctx *ctx, const struct nft_chain *chain) if (err < 0) return err; } + + cond_resched(); }
return 0; @@ -6907,9 +6909,13 @@ static int nf_tables_check_loops(const struct nft_ctx *ctx, break; } } + + cond_resched(); }
list_for_each_entry(set, &ctx->table->sets, list) { + cond_resched(); + if (!nft_is_active_next(ctx->net, set)) continue; if (!(set->flags & NFT_SET_MAP) ||
From: "Russell King (Oracle)" rmk+kernel@armlinux.org.uk
[ Upstream commit ec85bd369fd2bfaed6f45dd678706429d4f75b48 ]
When offset is larger than the size of the bit array, we should not attempt to access the array as we can perform an access beyond the end of the array. Fix this by changing the pre-condition.
Using "cmp r2, r1; bhs ..." covers us for the size == 0 case, since this will always take the branch when r1 is zero, irrespective of the value of r2. This means we can fix this bug without adding any additional code!
Tested-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/lib/findbit.S | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 7848780e8834..20fef6c41f6f 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -43,8 +43,8 @@ ENDPROC(_find_first_zero_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_zero_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -84,8 +84,8 @@ ENDPROC(_find_first_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -118,8 +118,8 @@ ENTRY(_find_first_zero_bit_be) ENDPROC(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering @@ -152,8 +152,8 @@ ENTRY(_find_first_bit_be) ENDPROC(_find_first_bit_be)
ENTRY(_find_next_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering
linux-stable-mirror@lists.linaro.org
-
Sasha Levin