The desired clock frequency was correctly set to 400MHz in the device tree but was lowered by the driver to 300MHz breaking 4K 60Hz content playback. Fix the issue by removing the driver call to clk_set_rate(), which reduce the amount of board specific code.
Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com --- This patch fixes user report of AV1 4K60 decoder not being fast enough on RK3588 based SoC. This is a break from Hantro original authors habbit of coding the frequencies in the driver instead of specifying this frequency in the device tree. The other calls to clk_set_rate() are left since this would require modifying many dtsi files, which would then be unsuitable for backport. --- Changes in v2: - Completely remove the unused init function, the driver is null-safe - Link to v1: https://lore.kernel.org/r/20250217-b4-hantro-av1-clock-rate-v1-1-65b91132c55... --- drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c index 964122e7c355934cd80eb442219f6ba51bba8b71..842040f713c15e6ff295771bc9fa5a7b66e584b2 100644 --- a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c +++ b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c @@ -17,7 +17,6 @@
#define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000) #define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000) -#define RK3588_ACLK_MAX_FREQ (300 * 1000 * 1000)
#define ROCKCHIP_VPU981_MIN_SIZE 64
@@ -440,13 +439,6 @@ static int rk3066_vpu_hw_init(struct hantro_dev *vpu) return 0; }
-static int rk3588_vpu981_hw_init(struct hantro_dev *vpu) -{ - /* Bump ACLKs to max. possible freq. to improve performance. */ - clk_set_rate(vpu->clocks[0].clk, RK3588_ACLK_MAX_FREQ); - return 0; -} - static int rockchip_vpu_hw_init(struct hantro_dev *vpu) { /* Bump ACLK to max. possible freq. to improve performance. */ @@ -807,7 +799,6 @@ const struct hantro_variant rk3588_vpu981_variant = { .codec_ops = rk3588_vpu981_codec_ops, .irqs = rk3588_vpu981_irqs, .num_irqs = ARRAY_SIZE(rk3588_vpu981_irqs), - .init = rk3588_vpu981_hw_init, .clk_names = rk3588_vpu981_vpu_clk_names, .num_clocks = ARRAY_SIZE(rk3588_vpu981_vpu_clk_names) };
--- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250217-b4-hantro-av1-clock-rate-e5497f1499df
Best regards,
On Mo, 2025-02-17 at 16:46 -0500, Nicolas Dufresne wrote:
The desired clock frequency was correctly set to 400MHz in the device tree but was lowered by the driver to 300MHz breaking 4K 60Hz content playback. Fix the issue by removing the driver call to clk_set_rate(), which reduce the amount of board specific code.
Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
I was going to ask whether there might be any device trees without the assigned-clock-rates around that this patch could break, but the DT node was introduced with 400 MHz clock setting in the initial commit dd6dc0c4c126 ("arm64: dts: rockchip: Add AV1 decoder node to rk3588s").
Reviewed-by: Philipp Zabel p.zabel@pengutronix.de
regards Philipp
Le 17/02/2025 à 22:46, Nicolas Dufresne a écrit :
The desired clock frequency was correctly set to 400MHz in the device tree but was lowered by the driver to 300MHz breaking 4K 60Hz content playback. Fix the issue by removing the driver call to clk_set_rate(), which reduce the amount of board specific code.
Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
Reviewed-by: Benjamin Gaignard benjamin.gaignard@collabora.com
This patch fixes user report of AV1 4K60 decoder not being fast enough on RK3588 based SoC. This is a break from Hantro original authors habbit of coding the frequencies in the driver instead of specifying this frequency in the device tree. The other calls to clk_set_rate() are left since this would require modifying many dtsi files, which would then be unsuitable for backport.
Changes in v2:
- Completely remove the unused init function, the driver is null-safe
- Link to v1: https://lore.kernel.org/r/20250217-b4-hantro-av1-clock-rate-v1-1-65b91132c55...
drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c index 964122e7c355934cd80eb442219f6ba51bba8b71..842040f713c15e6ff295771bc9fa5a7b66e584b2 100644 --- a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c +++ b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c @@ -17,7 +17,6 @@ #define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000) #define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000) -#define RK3588_ACLK_MAX_FREQ (300 * 1000 * 1000) #define ROCKCHIP_VPU981_MIN_SIZE 64 @@ -440,13 +439,6 @@ static int rk3066_vpu_hw_init(struct hantro_dev *vpu) return 0; } -static int rk3588_vpu981_hw_init(struct hantro_dev *vpu) -{
- /* Bump ACLKs to max. possible freq. to improve performance. */
- clk_set_rate(vpu->clocks[0].clk, RK3588_ACLK_MAX_FREQ);
- return 0;
-}
- static int rockchip_vpu_hw_init(struct hantro_dev *vpu) { /* Bump ACLK to max. possible freq. to improve performance. */
@@ -807,7 +799,6 @@ const struct hantro_variant rk3588_vpu981_variant = { .codec_ops = rk3588_vpu981_codec_ops, .irqs = rk3588_vpu981_irqs, .num_irqs = ARRAY_SIZE(rk3588_vpu981_irqs),
- .init = rk3588_vpu981_hw_init, .clk_names = rk3588_vpu981_vpu_clk_names, .num_clocks = ARRAY_SIZE(rk3588_vpu981_vpu_clk_names) };
base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250217-b4-hantro-av1-clock-rate-e5497f1499df
Best regards,
linux-stable-mirror@lists.linaro.org
-
Benjamin Gaignard -
Nicolas Dufresne -
Philipp Zabel