Gregory CLEMENT gregory.clement@bootlin.com writes:

Josua Mayer josua@solid-run.com writes:

...

Commit "arm64: dts: marvell: only enable complete sata nodes" changed armada-cp11x.dtsi disabling all sata ports status by default.

The author missed some dts which relied on the dtsi enabling all ports, and just disabled unused ones instead.

Update dts for SolidRun cn913x based boards to enable the available ports, rather than disabling the unvavailable one.

Further according to dt bindings the serdes phys are to be specified in the port node, not the controller node. Move those phys properties accordingly in clearfog base/pro/solidwan.

Fixes: 30023876aef4 ("arm64: dts: marvell: only enable complete sata nodes") Cc: stable@vger.kernel.org Signed-off-by: Josua Mayer josua@solid-run.com

Applied on mvebu/fixes

Actually this version not was not applied

Thanks,

Gregory

...

---

arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 7 ++++--- arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 6 ++++-- arch/arm64/boot/dts/marvell/cn9132-clearfog.dts | 6 ++---- 3 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi index ad0ab34b66028c53b8a18b3e8ee0c0aec869759f..bd42bfbe408bbe2a4d58dbd40204bcfb3c126312 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi @@ -152,11 +152,12 @@ expander0_pins: cp0-expander0-pins { /* SRDS #0 - SATA on M.2 connector */ &cp0_sata0 {

• phys = <&cp0_comphy0 1>; status = "okay";

• /* only port 1 is available */
• /delete-node/ sata-port@0;

• sata-port@1 {

• phys = <&cp0_comphy0 1>;
  

• status = "okay";
  

• };

}; /* microSD */ diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts index 47234d0858dd2195bb1485f25768ad3c757b7ac2..338853d3b179bb5cb742e975bb830fdb9d62d4cc 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts +++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts @@ -563,11 +563,13 @@ &cp1_rtc { /* SRDS #1 - SATA on M.2 (J44) */ &cp1_sata0 {

• phys = <&cp1_comphy1 0>; status = "okay";

/* only port 0 is available */

• /delete-node/ sata-port@1;

• sata-port@0 {

• phys = <&cp1_comphy1 0>;
  

• status = "okay";
  

• };

}; &cp1_syscon0 { diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts index 0f53745a6fa0d8cbd3ab9cdc28a972ed748c275f..115c55d73786e2b9265e1caa4c62ee26f498fb41 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts +++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts @@ -512,10 +512,9 @@ &cp1_sata0 { status = "okay"; /* only port 1 is available */

• /delete-node/ sata-port@0;
• sata-port@1 { phys = <&cp1_comphy3 1>;

• status = "okay";
  

  };

}; @@ -631,9 +630,8 @@ &cp2_sata0 { status = "okay"; /* only port 1 is available */

• /delete-node/ sata-port@0;
• sata-port@1 {

• status = "okay";
  

  phys = <&cp2_comphy3 1>; };

};

---

base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 change-id: 20250911-cn913x-sr-fix-sata-5c737ebdb97f

Best regards,

Josua Mayer josua@solid-run.com

-- Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com