From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 6a3239a738d86c5e9b5aad17fefe2c2bfd6ced83 ]

This reverts commit 9fcddaf2e28d779cb946d23838ba6d50f299aa80 as it was submitted under a fake name and we can not knowingly accept anonymous contributions to the repository.

This commit was part of a submission "test" to the Linux kernel community by some "researchers" at umn.edu. As outlined at: https://www-users.cs.umn.edu/%7Ekjlu/papers/full-disclosure.pdf it was done so as an attempt to submit a known-buggy patch to see if it could get by our review. However, the submission turned out to actually be correct, and not have a bug in it as the author did not understand how the PCI driver model works at all, and so the submission was accepted.

As this change is of useless consequence, there is no loss of functionality in reverting it.

Cc: "David S. Miller" davem@davemloft.net Cc: Christophe JAILLET christophe.jaillet@wanadoo.fr Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Email: Herbert Xu herbert@gondor.apana.org.au Link: https://lore.kernel.org/r/YIkTi9a3nnL50wMq@kroah.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/cavium/nitrox/nitrox_main.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c index 9d14be97e381..cee2a2713038 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_main.c +++ b/drivers/crypto/cavium/nitrox/nitrox_main.c @@ -451,7 +451,6 @@ static int nitrox_probe(struct pci_dev *pdev, err = pci_request_mem_regions(pdev, nitrox_driver_name); if (err) { pci_disable_device(pdev); - dev_err(&pdev->dev, "Failed to request mem regions!\n"); return err; } pci_set_master(pdev);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 4b059ce1f4b368208c2310925f49be77f15e527b ]

This reverts commit beae77170c60aa786f3e4599c18ead2854d8694d.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It is safe to ignore this error as the mixer element is optional, and the driver is very legacy.

Cc: Aditya Pakki pakki001@umn.edu Reviewed-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20210503115736.2104747-8-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/isa/sb/sb16_main.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c index 38dc1fde25f3..aa4870531023 100644 --- a/sound/isa/sb/sb16_main.c +++ b/sound/isa/sb/sb16_main.c @@ -846,14 +846,10 @@ int snd_sb16dsp_pcm(struct snd_sb *chip, int device) snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sb16_playback_ops); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_sb16_capture_ops);

- if (chip->dma16 >= 0 && chip->dma8 != chip->dma16) { - err = snd_ctl_add(card, snd_ctl_new1( - &snd_sb16_dma_control, chip)); - if (err) - return err; - } else { + if (chip->dma16 >= 0 && chip->dma8 != chip->dma16) + snd_ctl_add(card, snd_ctl_new1(&snd_sb16_dma_control, chip)); + else pcm->info_flags = SNDRV_PCM_INFO_HALF_DUPLEX; - }

snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV, card->dev, 64*1024, 128*1024);

From: Atul Gopinathan atulgopinathan@gmail.com

[ Upstream commit 3890e3dea315f1a257d1b940a2a4e2fa16a7b095 ]

The macro "spi_register_driver" invokes the function "__spi_register_driver()" which has a return type of int and can fail, returning a negative value in such a case. This is currently ignored and the init() function yields success even if the spi driver failed to register.

Fix this by collecting the return value of "__spi_register_driver()" and also unregister the uart driver in case of failure.

Cc: Jiri Slaby jirislaby@kernel.org Signed-off-by: Atul Gopinathan atulgopinathan@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-12-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/max310x.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index f60b7b86d099..5bf8dd6198bb 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1527,10 +1527,12 @@ static int __init max310x_uart_init(void) return ret;

#ifdef CONFIG_SPI_MASTER - spi_register_driver(&max310x_spi_driver); + ret = spi_register_driver(&max310x_spi_driver); + if (ret) + uart_unregister_driver(&max310x_uart); #endif

- return 0; + return ret; } module_init(max310x_uart_init);

From: Anirudh Rayabharam mail@anirudhrb.com

[ Upstream commit 52202be1cd996cde6e8969a128dc27ee45a7cb5e ]

In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

Cc: "David S. Miller" davem@davemloft.net Acked-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Link: https://lore.kernel.org/r/20210503115736.2104747-16-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c index dc90c61fc827..b0c0504950d8 100644 --- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c +++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c @@ -547,6 +547,11 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) return -1;

base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + if (!base) { + pcmcia_release_window(link, link->resource[2]); + return -1; + } + pcmcia_map_mem_page(link, link->resource[2], 0);

/*

From: Anirudh Rayabharam mail@anirudhrb.com

[ Upstream commit bbeb18f27a44ce6adb00d2316968bc59dc640b9b ]

In smcd_alloc_dev(), if alloc_ordered_workqueue() fails, properly catch it, clean up and return NULL to let the caller know there was a failure. Move the call to alloc_ordered_workqueue higher in the function in order to abort earlier without needing to unwind the call to device_initialize().

Cc: Ursula Braun ubraun@linux.ibm.com Cc: David S. Miller davem@davemloft.net Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Link: https://lore.kernel.org/r/20210503115736.2104747-18-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/smc_ism.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c index b4a9fe452470..024ca21392f7 100644 --- a/net/smc/smc_ism.c +++ b/net/smc/smc_ism.c @@ -304,6 +304,14 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name, return NULL; }

+ smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)", + WQ_MEM_RECLAIM, name); + if (!smcd->event_wq) { + kfree(smcd->conn); + kfree(smcd); + return NULL; + } + smcd->dev.parent = parent; smcd->dev.release = smcd_release; device_initialize(&smcd->dev); @@ -317,8 +325,6 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name, INIT_LIST_HEAD(&smcd->vlan); INIT_LIST_HEAD(&smcd->lgr_list); init_waitqueue_head(&smcd->lgrs_deleted); - smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)", - WQ_MEM_RECLAIM, name); return smcd; } EXPORT_SYMBOL_GPL(smcd_alloc_dev);

From: Du Cheng ducheng2@gmail.com

[ Upstream commit 65a67792e3416f7c5d7daa47d99334cbb19a7449 ]

The condition of dev == NULL is impossible in caif_xmit(), hence it is for the removal.

Explanation: The static caif_xmit() is only called upon via a function pointer `ndo_start_xmit` defined in include/linux/netdevice.h: ``` struct net_device_ops { ... netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev); ... } ```

The exhausive list of call points are: ``` drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c dev->netdev_ops->ndo_start_xmit(skb, dev); ^ ^

drivers/infiniband/ulp/opa_vnic/opa_vnic_netdev.c struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev); ^ ^ return adapter->rn_ops->ndo_start_xmit(skb, netdev); // adapter would crash first ^ ^

drivers/usb/gadget/function/f_ncm.c ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev); ^ ^

include/linux/netdevice.h static inline netdev_tx_t __netdev_start_xmit(... { return ops->ndo_start_xmit(skb, dev); ^ }

const struct net_device_ops *ops = dev->netdev_ops; ^ rc = __netdev_start_xmit(ops, skb, dev, more); ^ ```

In each of the enumerated scenarios, it is impossible for the NULL-valued dev to reach the caif_xmit() without crashing the kernel earlier, therefore `BUG_ON(dev == NULL)` is rather useless, hence the removal.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Du Cheng ducheng2@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-20-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/caif/caif_serial.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 4cc0d91d9c87..d025ea434933 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -270,7 +270,6 @@ static netdev_tx_t caif_xmit(struct sk_buff *skb, struct net_device *dev) { struct ser_device *ser;

- BUG_ON(dev == NULL); ser = netdev_priv(dev);

/* Send flow off once, on high water mark */

From: Tom Seewald tseewald@gmail.com

[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ]

The function hpet_resources() calls ioremap() two times, but in both cases it does not check if ioremap() returned a null pointer. Fix this by adding null pointer checks and returning an appropriate error.

Signed-off-by: Tom Seewald tseewald@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/hpet.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 6f13def6c172..8b55085650ad 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -969,6 +969,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) if (ACPI_SUCCESS(status)) { hdp->hd_phys_address = addr.address.minimum; hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length); + if (!hdp->hd_address) + return AE_ERROR;

if (hpet_is_known(hdp)) { iounmap(hdp->hd_address); @@ -982,6 +984,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) hdp->hd_phys_address = fixmem32->address; hdp->hd_address = ioremap(fixmem32->address, HPET_RANGE_SIZE); + if (!hdp->hd_address) + return AE_ERROR;

if (hpet_is_known(hdp)) { iounmap(hdp->hd_address);

From: Atul Gopinathan atulgopinathan@gmail.com

[ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]

The field "fm_res" of "struct snd_sb8" is never used/dereferenced throughout the sb8.c code. Therefore there is no need for any null value check after the "request_region()".

Add a comment note to make developers know about this and prevent any "NULL check" patches on this part of code.

Cc: Takashi Iwai tiwai@suse.de Signed-off-by: Atul Gopinathan atulgopinathan@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-36-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/isa/sb/sb8.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index 438109f167d6..fc1ba3d43265 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -94,7 +94,11 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev) acard = card->private_data; card->private_free = snd_sb8_free;

- /* block the 0x388 port to avoid PnP conflicts */ + /* + * Block the 0x388 port to avoid PnP conflicts. + * No need to check this value after request_region, + * as we never do anything with it. + */ acard->fm_res = request_region(0x388, 4, "SoundBlaster FM"); if (!acard->fm_res) { err = -EBUSY;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit abd7bca23bd4247124265152d00ffd4b2b0d6877 ]

This reverts commit d721fe99f6ada070ae8fc0ec3e01ce5a42def0d9.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit was incorrect, it should have never have used "unlikely()" and if it ever does trigger, resources are left grabbed.

Given there are no users for this code around, I'll just revert this and leave it "as is" as the odds that ioremap() will ever fail here is horrendiously low.

Cc: Kangjie Lu kjlu@umn.edu Cc: David S. Miller davem@davemloft.net Link: https://lore.kernel.org/r/20210503115736.2104747-41-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/mISDNinfineon.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c index a16c7a2a7f3d..fa9c491f9c38 100644 --- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c +++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c @@ -697,11 +697,8 @@ setup_io(struct inf_hw *hw) (ulong)hw->addr.start, (ulong)hw->addr.size); return err; } - if (hw->ci->addr_mode == AM_MEMIO) { + if (hw->ci->addr_mode == AM_MEMIO) hw->addr.p = ioremap(hw->addr.start, hw->addr.size); - if (unlikely(!hw->addr.p)) - return -ENOMEM; - } hw->addr.mode = hw->ci->addr_mode; if (debug & DEBUG_HW) pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit efba106f89fc6848726716c101f4c84e88720a9c ]

This reverts commit fc6a6521556c8250e356ddc6a3f2391aa62dc976.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The change being reverted does NOTHING as the caller to this function does not even look at the return value of the call. So the "claim" that this fixed an an issue is not true. It will be fixed up properly in a future patch by propagating the error up the stack correctly.

Cc: Kangjie Lu kjlu@umn.edu Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-43-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath6kl/wmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index dbc47702a268..99be0d20f9a5 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -776,8 +776,10 @@ int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi) cmd->info.params.roam_rssi_floor = DEF_LRSSI_ROAM_FLOOR; cmd->roam_ctrl = WMI_SET_LRSSI_SCAN_PARAMS;

- return ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID, + ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID, NO_SYNC_WMIFLAG); + + return 0; }

int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 36a2c87f7ed9e305d05b9a5c044cc6c494771504 ]

This reverts commit 38d22659803a033b1b66cd2624c33570c0dde77d.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

While it looks like the original change is correct, it is not, as none of the setup actually happens, and the error value is not propagated upwards.

Cc: Aditya Pakki pakki001@umn.edu Cc: David S. Miller davem@davemloft.net Link: https://lore.kernel.org/r/20210503115736.2104747-47-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/hfcsusb.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 70061991915a..4bb470d3963d 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -249,9 +249,6 @@ hfcsusb_ph_info(struct hfcsusb *hw) int i;

phi = kzalloc(struct_size(phi, bch, dch->dev.nrbchan), GFP_ATOMIC); - if (!phi) - return; - phi->dch.ch.protocol = hw->protocol; phi->dch.ch.Flags = dch->Flags; phi->dch.state = dch->state;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 43ed0fcf613a87dd0221ec72d1ade4d6544f2ffc ]

This reverts commit a474b3f0428d6b02a538aa10b3c3b722751cb382.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original change is NOT correct, as it does not correctly unwind from the resources that was allocated before the call to platform_driver_register().

Cc: Aditya Pakki pakki001@umn.edu Acked-By: Vinod Koul vkoul@kernel.org Acked-By: Sinan Kaya okaya@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-51-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/qcom/hidma_mgmt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c index 806ca02c52d7..fe87b01f7a4e 100644 --- a/drivers/dma/qcom/hidma_mgmt.c +++ b/drivers/dma/qcom/hidma_mgmt.c @@ -418,8 +418,9 @@ static int __init hidma_mgmt_init(void) hidma_mgmt_of_populate_channels(child); } #endif - return platform_driver_register(&hidma_mgmt_driver); + platform_driver_register(&hidma_mgmt_driver);

+ return 0; } module_init(hidma_mgmt_init); MODULE_LICENSE("GPL v2");

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 46651077765c80a0d6f87f3469129a72e49ce91b ]

This reverts commit 434256833d8eb988cb7f3b8a41699e2fe48d9332.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit was incorrect, the error needs to be propagated back to the caller AND if the second group call fails, the first needs to be removed. There are much better ways to solve this, the driver should NOT be calling sysfs_create_group() on its own as it is racing userspace and loosing.

Cc: Kangjie Lu kjlu@umn.edu Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-53-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/libertas/mesh.c | 5 ----- 1 file changed, 5 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c index f5b78257d551..c611e6668b21 100644 --- a/drivers/net/wireless/marvell/libertas/mesh.c +++ b/drivers/net/wireless/marvell/libertas/mesh.c @@ -805,12 +805,7 @@ static void lbs_persist_config_init(struct net_device *dev) { int ret; ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group); - if (ret) - pr_err("failed to create boot_opts_group.\n"); - ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group); - if (ret) - pr_err("failed to create mesh_ie_group.\n"); }

static void lbs_persist_config_remove(struct net_device *dev)

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 1e0ce84215dbfd6065872e5d3755352da34f198b ]

This reverts commit 51dd97d1df5fb9ac58b9b358e63e67b530f6ae21.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

Lots of things seem to be still allocated here and must be properly cleaned up if an error happens here.

Cc: Kangjie Lu kjlu@umn.edu Cc: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-55-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5645.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 420003d062c7..ed4b59ba63f3 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3419,9 +3419,6 @@ static int rt5645_probe(struct snd_soc_component *component) RT5645_HWEQ_NUM, sizeof(struct rt5645_eq_param_s), GFP_KERNEL);

- if (!rt5645->eq_param) - return -ENOMEM; - return 0; }

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ]

cs43130_probe() does not do any valid error checking of things it initializes, OR what it does, it does not unwind properly if there are errors.

Fix this up by moving the sysfs files to an attribute group so the driver core will correctly add/remove them all at once and handle errors with them, and correctly check for creating a new workqueue and unwinding if that fails.

Cc: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs43130.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index bb46e993c353..8f70dee95878 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1735,6 +1735,14 @@ static DEVICE_ATTR(hpload_dc_r, 0444, cs43130_show_dc_r, NULL); static DEVICE_ATTR(hpload_ac_l, 0444, cs43130_show_ac_l, NULL); static DEVICE_ATTR(hpload_ac_r, 0444, cs43130_show_ac_r, NULL);

+static struct attribute *hpload_attrs[] = { + &dev_attr_hpload_dc_l.attr, + &dev_attr_hpload_dc_r.attr, + &dev_attr_hpload_ac_l.attr, + &dev_attr_hpload_ac_r.attr, +}; +ATTRIBUTE_GROUPS(hpload); + static struct reg_sequence hp_en_cal_seq[] = { {CS43130_INT_MASK_4, CS43130_INT_MASK_ALL}, {CS43130_HP_MEAS_LOAD_1, 0}, @@ -2302,23 +2310,15 @@ static int cs43130_probe(struct snd_soc_component *component)

cs43130->hpload_done = false; if (cs43130->dc_meas) { - ret = device_create_file(component->dev, &dev_attr_hpload_dc_l); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_dc_r); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_ac_l); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_ac_r); - if (ret < 0) + ret = sysfs_create_groups(&component->dev->kobj, hpload_groups); + if (ret) return ret;

cs43130->wq = create_singlethread_workqueue("cs43130_hp"); + if (!cs43130->wq) { + sysfs_remove_groups(&component->dev->kobj, hpload_groups); + return -ENOMEM; + } INIT_WORK(&cs43130->work, cs43130_imp_meas); }

From: Alaa Emad alaaemadhossney.ae@gmail.com

[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]

The function sp8870_readreg returns a negative value when i2c_transfer fails so properly check for this and return the error if it happens.

Cc: Sean Young sean@mess.org Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Alaa Emad alaaemadhossney.ae@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-60-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-frontends/sp8870.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c index ee893a2f2261..9767159aeb9b 100644 --- a/drivers/media/dvb-frontends/sp8870.c +++ b/drivers/media/dvb-frontends/sp8870.c @@ -280,7 +280,9 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe) sp8870_writereg(state, 0xc05, reg0xc05);

// read status reg in order to clear pending irqs - sp8870_readreg(state, 0x200); + err = sp8870_readreg(state, 0x200); + if (err < 0) + return err;

// system controller start sp8870_microcontroller_start(state);

From: Alaa Emad alaaemadhossney.ae@gmail.com

[ Upstream commit e932f5b458eee63d013578ea128b9ff8ef5f5496 ]

If m5602_write_bridge times out, it will return a negative error value. So properly check for this and handle the error correctly instead of just ignoring it.

Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Alaa Emad alaaemadhossney.ae@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-62-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c index 50481dc928d0..bf1af6ed9131 100644 --- a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c @@ -195,7 +195,7 @@ static const struct v4l2_ctrl_config mt9m111_greenbal_cfg = { int mt9m111_probe(struct sd *sd) { u8 data[2] = {0x00, 0x00}; - int i; + int i, err; struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;

if (force_sensor) { @@ -213,15 +213,17 @@ int mt9m111_probe(struct sd *sd) /* Do the preinit */ for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) { if (preinit_mt9m111[i][0] == BRIDGE) { - m5602_write_bridge(sd, - preinit_mt9m111[i][1], - preinit_mt9m111[i][2]); + err = m5602_write_bridge(sd, + preinit_mt9m111[i][1], + preinit_mt9m111[i][2]); } else { data[0] = preinit_mt9m111[i][2]; data[1] = preinit_mt9m111[i][3]; - m5602_write_sensor(sd, - preinit_mt9m111[i][1], data, 2); + err = m5602_write_sensor(sd, + preinit_mt9m111[i][1], data, 2); } + if (err < 0) + return err; }

if (m5602_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2))

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]

If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to initialize the device but return the error to the calling funtion.

Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-64-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/gspca/m5602/m5602_po1030.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c index 7bdbb8065146..8fd99ceee4b6 100644 --- a/drivers/media/usb/gspca/m5602/m5602_po1030.c +++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c @@ -155,6 +155,7 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = { int po1030_probe(struct sd *sd) { u8 dev_id_h = 0, i; + int err; struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;

if (force_sensor) { @@ -173,10 +174,13 @@ int po1030_probe(struct sd *sd) for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) { u8 data = preinit_po1030[i][2]; if (preinit_po1030[i][0] == SENSOR) - m5602_write_sensor(sd, - preinit_po1030[i][1], &data, 1); + err = m5602_write_sensor(sd, preinit_po1030[i][1], + &data, 1); else - m5602_write_bridge(sd, preinit_po1030[i][1], data); + err = m5602_write_bridge(sd, preinit_po1030[i][1], + data); + if (err < 0) + return err; }

if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))

From: Tom Seewald tseewald@gmail.com

[ Upstream commit dbc97bfd3918ed9268bfc174cae8a7d6b3d51aad ]

The functions send_rx_ctrl_cmd() in both liquidio/lio_main.c and liquidio/lio_vf_main.c do not check if the call to octeon_alloc_soft_command() fails and returns a null pointer. Both functions also return void so errors are not propagated back to the caller.

Fix these issues by updating both instances of send_rx_ctrl_cmd() to return an integer rather than void, and have them return -ENOMEM if an allocation failure occurs. Also update all callers of send_rx_ctrl_cmd() so that they now check the return value.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Tom Seewald tseewald@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-66-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/cavium/liquidio/lio_main.c | 28 +++++++++++++------ .../ethernet/cavium/liquidio/lio_vf_main.c | 27 +++++++++++++----- 2 files changed, 40 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index e4c220f30040..e0d18e917108 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -1153,7 +1153,7 @@ static void octeon_destroy_resources(struct octeon_device *oct) * @lio: per-network private data * @start_stop: whether to start or stop */ -static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) +static int send_rx_ctrl_cmd(struct lio *lio, int start_stop) { struct octeon_soft_command *sc; union octnet_cmd *ncmd; @@ -1161,11 +1161,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) int retval;

if (oct->props[lio->ifidx].rx_on == start_stop) - return; + return 0;

sc = (struct octeon_soft_command *) octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE, 16, 0); + if (!sc) { + netif_info(lio, rx_err, lio->netdev, + "Failed to allocate octeon_soft_command struct\n"); + return -ENOMEM; + }

ncmd = (union octnet_cmd *)sc->virtdptr;

@@ -1187,18 +1192,19 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) if (retval == IQ_SEND_FAILED) { netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n"); octeon_free_soft_command(oct, sc); - return; } else { /* Sleep on a wait queue till the cond flag indicates that the * response arrived or timed-out. */ retval = wait_for_sc_completion_timeout(oct, sc, 0); if (retval) - return; + return retval;

oct->props[lio->ifidx].rx_on = start_stop; WRITE_ONCE(sc->caller_is_done, true); } + + return retval; }

/** @@ -1773,6 +1779,7 @@ static int liquidio_open(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

if (oct->props[lio->ifidx].napi_enabled == 0) { tasklet_disable(&oct_priv->droq_tasklet); @@ -1808,7 +1815,9 @@ static int liquidio_open(struct net_device *netdev) netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");

/* tell Octeon to start forwarding packets to host */ - send_rx_ctrl_cmd(lio, 1); + ret = send_rx_ctrl_cmd(lio, 1); + if (ret) + return ret;

/* start periodical statistics fetch */ INIT_DELAYED_WORK(&lio->stats_wk.work, lio_fetch_stats); @@ -1819,7 +1828,7 @@ static int liquidio_open(struct net_device *netdev) dev_info(&oct->pci_dev->dev, "%s interface is opened\n", netdev->name);

- return 0; + return ret; }

/** @@ -1833,6 +1842,7 @@ static int liquidio_stop(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

ifstate_reset(lio, LIO_IFSTATE_RUNNING);

@@ -1849,7 +1859,9 @@ static int liquidio_stop(struct net_device *netdev) lio->link_changes++;

/* Tell Octeon that nic interface is down. */ - send_rx_ctrl_cmd(lio, 0); + ret = send_rx_ctrl_cmd(lio, 0); + if (ret) + return ret;

if (OCTEON_CN23XX_PF(oct)) { if (!oct->msix_on) @@ -1884,7 +1896,7 @@ static int liquidio_stop(struct net_device *netdev)

dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);

- return 0; + return ret; }

/** diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c index 103440f97bc8..226a7842d2fd 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c @@ -595,7 +595,7 @@ static void octeon_destroy_resources(struct octeon_device *oct) * @lio: per-network private data * @start_stop: whether to start or stop */ -static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) +static int send_rx_ctrl_cmd(struct lio *lio, int start_stop) { struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; struct octeon_soft_command *sc; @@ -603,11 +603,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) int retval;

if (oct->props[lio->ifidx].rx_on == start_stop) - return; + return 0;

sc = (struct octeon_soft_command *) octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE, 16, 0); + if (!sc) { + netif_info(lio, rx_err, lio->netdev, + "Failed to allocate octeon_soft_command struct\n"); + return -ENOMEM; + }

ncmd = (union octnet_cmd *)sc->virtdptr;

@@ -635,11 +640,13 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) */ retval = wait_for_sc_completion_timeout(oct, sc, 0); if (retval) - return; + return retval;

oct->props[lio->ifidx].rx_on = start_stop; WRITE_ONCE(sc->caller_is_done, true); } + + return retval; }

/** @@ -906,6 +913,7 @@ static int liquidio_open(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

if (!oct->props[lio->ifidx].napi_enabled) { tasklet_disable(&oct_priv->droq_tasklet); @@ -932,11 +940,13 @@ static int liquidio_open(struct net_device *netdev) (LIQUIDIO_NDEV_STATS_POLL_TIME_MS));

/* tell Octeon to start forwarding packets to host */ - send_rx_ctrl_cmd(lio, 1); + ret = send_rx_ctrl_cmd(lio, 1); + if (ret) + return ret;

dev_info(&oct->pci_dev->dev, "%s interface is opened\n", netdev->name);

- return 0; + return ret; }

/** @@ -950,9 +960,12 @@ static int liquidio_stop(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

/* tell Octeon to stop forwarding packets to host */ - send_rx_ctrl_cmd(lio, 0); + ret = send_rx_ctrl_cmd(lio, 0); + if (ret) + return ret;

netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n"); /* Inform that netif carrier is down */ @@ -986,7 +999,7 @@ static int liquidio_stop(struct net_device *netdev)

dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);

- return 0; + return ret; }

/**

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]

The brcmfmac driver ignores any errors on initialization with the different busses by deferring the initialization to a workqueue and ignoring all possible errors that might happen. Fix up all of this by only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 +--- .../broadcom/brcm80211/brcmfmac/bus.h | 19 ++++++++- .../broadcom/brcm80211/brcmfmac/core.c | 42 ++++++++----------- .../broadcom/brcm80211/brcmfmac/pcie.c | 9 +--- .../broadcom/brcm80211/brcmfmac/pcie.h | 5 --- .../broadcom/brcm80211/brcmfmac/usb.c | 4 +- 6 files changed, 41 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index f9ebb98b0e3c..b6d0bc73923f 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -1217,13 +1217,9 @@ static struct sdio_driver brcmf_sdmmc_driver = { }, };

-void brcmf_sdio_register(void) +int brcmf_sdio_register(void) { - int ret; - - ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); + return sdio_register_driver(&brcmf_sdmmc_driver); }

void brcmf_sdio_exit(void) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h index 08f9d47f2e5c..3f5da3bb6aa5 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h @@ -275,11 +275,26 @@ void brcmf_bus_add_txhdrlen(struct device *dev, uint len);

#ifdef CONFIG_BRCMFMAC_SDIO void brcmf_sdio_exit(void); -void brcmf_sdio_register(void); +int brcmf_sdio_register(void); +#else +static inline void brcmf_sdio_exit(void) { } +static inline int brcmf_sdio_register(void) { return 0; } #endif + #ifdef CONFIG_BRCMFMAC_USB void brcmf_usb_exit(void); -void brcmf_usb_register(void); +int brcmf_usb_register(void); +#else +static inline void brcmf_usb_exit(void) { } +static inline int brcmf_usb_register(void) { return 0; } +#endif + +#ifdef CONFIG_BRCMFMAC_PCIE +void brcmf_pcie_exit(void); +int brcmf_pcie_register(void); +#else +static inline void brcmf_pcie_exit(void) { } +static inline int brcmf_pcie_register(void) { return 0; } #endif

#endif /* BRCMFMAC_BUS_H */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 3dd28f5fef19..61039538a15b 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -1518,40 +1518,34 @@ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state) } }

-static void brcmf_driver_register(struct work_struct *work) -{ -#ifdef CONFIG_BRCMFMAC_SDIO - brcmf_sdio_register(); -#endif -#ifdef CONFIG_BRCMFMAC_USB - brcmf_usb_register(); -#endif -#ifdef CONFIG_BRCMFMAC_PCIE - brcmf_pcie_register(); -#endif -} -static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); - int __init brcmf_core_init(void) { - if (!schedule_work(&brcmf_driver_work)) - return -EBUSY; + int err;

+ err = brcmf_sdio_register(); + if (err) + return err; + + err = brcmf_usb_register(); + if (err) + goto error_usb_register; + + err = brcmf_pcie_register(); + if (err) + goto error_pcie_register; return 0; + +error_pcie_register: + brcmf_usb_exit(); +error_usb_register: + brcmf_sdio_exit(); + return err; }

void __exit brcmf_core_exit(void) { - cancel_work_sync(&brcmf_driver_work); - -#ifdef CONFIG_BRCMFMAC_SDIO brcmf_sdio_exit(); -#endif -#ifdef CONFIG_BRCMFMAC_USB brcmf_usb_exit(); -#endif -#ifdef CONFIG_BRCMFMAC_PCIE brcmf_pcie_exit(); -#endif }

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index d8db0dbcfe09..603aff421e38 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -2138,15 +2138,10 @@ static struct pci_driver brcmf_pciedrvr = { };

-void brcmf_pcie_register(void) +int brcmf_pcie_register(void) { - int err; - brcmf_dbg(PCIE, "Enter\n"); - err = pci_register_driver(&brcmf_pciedrvr); - if (err) - brcmf_err(NULL, "PCIE driver registration failed, err=%d\n", - err); + return pci_register_driver(&brcmf_pciedrvr); }

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h index d026401d2001..8e6c227e8315 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h @@ -11,9 +11,4 @@ struct brcmf_pciedev { struct brcmf_pciedev_info *devinfo; };

- -void brcmf_pcie_exit(void); -void brcmf_pcie_register(void); - - #endif /* BRCMFMAC_PCIE_H */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index d2a803fc8ac6..9fb68c2dc7e3 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1584,8 +1584,8 @@ void brcmf_usb_exit(void) usb_deregister(&brcmf_usbdrvr); }

-void brcmf_usb_register(void) +int brcmf_usb_register(void) { brcmf_dbg(USB, "Enter\n"); - usb_register(&brcmf_usbdrvr); + return usb_register(&brcmf_usbdrvr); }

From: Boris Burkov boris@bur.io

[ Upstream commit 15c7745c9a0078edad1f7df5a6bb7b80bc8cca23 ]

`xfs_io -c 'fiemap <off> <len>' <file>`

can give surprising results on btrfs that differ from xfs.

btrfs prints out extents trimmed to fit the user input. If the user's fiemap request has an offset, then rather than returning each whole extent which intersects that range, we also trim the start extent to not have start < off.

Documentation in filesystems/fiemap.txt and the xfs_io man page suggests that returning the whole extent is expected.

Some cases which all yield the same fiemap in xfs, but not btrfs: dd if=/dev/zero of=$f bs=4k count=1 sudo xfs_io -c 'fiemap 0 1024' $f 0: [0..7]: 26624..26631 sudo xfs_io -c 'fiemap 2048 1024' $f 0: [4..7]: 26628..26631 sudo xfs_io -c 'fiemap 2048 4096' $f 0: [4..7]: 26628..26631 sudo xfs_io -c 'fiemap 3584 512' $f 0: [7..7]: 26631..26631 sudo xfs_io -c 'fiemap 4091 5' $f 0: [7..6]: 26631..26630

I believe this is a consequence of the logic for merging contiguous extents represented by separate extent items. That logic needs to track the last offset as it loops through the extent items, which happens to pick up the start offset on the first iteration, and trim off the beginning of the full extent. To fix it, start `off` at 0 rather than `start` so that we keep the iteration/merging intact without cutting off the start of the extent.

after the fix, all the above commands give:

0: [0..7]: 26624..26631

The merging logic is exercised by fstest generic/483, and I have written a new fstest for checking we don't have backwards or zero-length fiemaps for cases like those above.

Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Boris Burkov boris@bur.io Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/extent_io.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 30cf917a58e9..81e98a457130 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4662,7 +4662,7 @@ int extent_fiemap(struct btrfs_inode *inode, struct fiemap_extent_info *fieinfo, u64 start, u64 len) { int ret = 0; - u64 off = start; + u64 off; u64 max = start + len; u32 flags = 0; u32 found_type; @@ -4698,6 +4698,11 @@ int extent_fiemap(struct btrfs_inode *inode, struct fiemap_extent_info *fieinfo, goto out_free_ulist; }

+ /* + * We can't initialize that to 'start' as this could miss extents due + * to extent item merging + */ + off = 0; start = round_down(start, btrfs_inode_sectorsize(inode)); len = round_up(max, btrfs_inode_sectorsize(inode)) - start;

From: Matt Wang wwentao@vmware.com

[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]

Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit") introduced a serious issue for 64-bit systems. With this commit, 64-bit kernel will enumerate 8*15 non-existing disks. This is caused by the broken CCB structure. The change from u32 data to void *data increased CCB length on 64-bit system, which introduced an extra 4 byte offset of the CDB. This leads to incorrect response to INQUIRY commands during enumeration.

Fix disk enumeration failure by reverting the portion of the commit above which switched the data pointer from u32 to void.

Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com Acked-by: Khalid Aziz khalid@gonehiking.org Signed-off-by: Matt Wang wwentao@vmware.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/BusLogic.c | 6 +++--- drivers/scsi/BusLogic.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index ccb061ab0a0a..7231de2767a9 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -3078,11 +3078,11 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command, ccb->opcode = BLOGIC_INITIATOR_CCB_SG; ccb->datalen = count * sizeof(struct blogic_sg_seg); if (blogic_multimaster_type(adapter)) - ccb->data = (void *)((unsigned int) ccb->dma_handle + + ccb->data = (unsigned int) ccb->dma_handle + ((unsigned long) &ccb->sglist - - (unsigned long) ccb)); + (unsigned long) ccb); else - ccb->data = ccb->sglist; + ccb->data = virt_to_32bit_virt(ccb->sglist);

scsi_for_each_sg(command, sg, count, i) { ccb->sglist[i].segbytes = sg_dma_len(sg); diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h index 6182cc8a0344..e081ad47d1cf 100644 --- a/drivers/scsi/BusLogic.h +++ b/drivers/scsi/BusLogic.h @@ -814,7 +814,7 @@ struct blogic_ccb { unsigned char cdblen; /* Byte 2 */ unsigned char sense_datalen; /* Byte 3 */ u32 datalen; /* Bytes 4-7 */ - void *data; /* Bytes 8-11 */ + u32 data; /* Bytes 8-11 */ unsigned char:8; /* Byte 12 */ unsigned char:8; /* Byte 13 */ enum blogic_adapter_status adapter_status; /* Byte 14 */

From: Ajish Koshy ajish.koshy@microchip.com

[ Upstream commit d1acd81bd6eb685aa9fef25624fb36d297f6404e ]

When driver is loaded after rmmod some drives are not showing up during discovery.

SATA drives are directly attached to the controller connected phys. During device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out during revalidation. This will trigger abort from host side and controller successfully aborts the command and returns success. Post this successful abort response ATA library decides to mark the disk as NODEV.

To overcome this, inside pm8001_scan_start() after phy_start() call, add get start response and wait for few milliseconds to trigger next phy start. This millisecond delay will give sufficient time for the controller state machine to accept next phy start.

Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.com Signed-off-by: Ajish Koshy ajish.koshy@microchip.com Signed-off-by: Viswas G viswas.g@microchip.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_hwi.c | 10 ++++++---- drivers/scsi/pm8001/pm8001_init.c | 2 +- drivers/scsi/pm8001/pm8001_sas.c | 7 ++++++- drivers/scsi/pm8001/pm80xx_hwi.c | 12 ++++++------ 4 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 355d1c5f2194..2114d2dd3501 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3703,11 +3703,13 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) case HW_EVENT_PHY_START_STATUS: pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n", status); - if (status == 0) { + if (status == 0) phy->phy_state = 1; - if (pm8001_ha->flags == PM8001F_RUN_TIME && - phy->enable_completion != NULL) - complete(phy->enable_completion); + + if (pm8001_ha->flags == PM8001F_RUN_TIME && + phy->enable_completion != NULL) { + complete(phy->enable_completion); + phy->enable_completion = NULL; } break; case HW_EVENT_SAS_PHY_UP: diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 7657d68e12d5..0c0c886c7371 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -1139,8 +1139,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev, goto err_out_shost; } list_add_tail(&pm8001_ha->list, &hba_list); - scsi_scan_host(pm8001_ha->shost); pm8001_ha->flags = PM8001F_RUN_TIME; + scsi_scan_host(pm8001_ha->shost); return 0;

err_out_shost: diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 474468df2a78..39de9a9360d3 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -264,12 +264,17 @@ void pm8001_scan_start(struct Scsi_Host *shost) int i; struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + DECLARE_COMPLETION_ONSTACK(completion); pm8001_ha = sha->lldd_ha; /* SAS_RE_INITIALIZATION not available in SPCv/ve */ if (pm8001_ha->chip_id == chip_8001) PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); - for (i = 0; i < pm8001_ha->chip->n_phy; ++i) + for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { + pm8001_ha->phy[i].enable_completion = &completion; PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); + wait_for_completion(&completion); + msleep(300); + } }

int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 27b354860a16..a203a4fc2674 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -3432,13 +3432,13 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_dbg(pm8001_ha, INIT, "phy start resp status:0x%x, phyid:0x%x\n", status, phy_id); - if (status == 0) { + if (status == 0) phy->phy_state = PHY_LINK_DOWN; - if (pm8001_ha->flags == PM8001F_RUN_TIME && - phy->enable_completion != NULL) { - complete(phy->enable_completion); - phy->enable_completion = NULL; - } + + if (pm8001_ha->flags == PM8001F_RUN_TIME && + phy->enable_completion != NULL) { + complete(phy->enable_completion); + phy->enable_completion = NULL; } return 0;

From: Josef Bacik josef@toxicpanda.com

[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]

While doing error injection testing I got the following panic

kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error.

Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/tree-log.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 8bc3e2f25e7d..9a0cfa0e124d 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1823,8 +1823,6 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, root, inode); } else if (ret == -EEXIST) { ret = 0; - } else { - BUG(); /* Logic Error */ } iput(inode);

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]

The intel_punit_ipc driver might be compiled as a module. When udev handles the event of the devices appearing the intel_punit_ipc module is missing.

Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.int... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_punit_ipc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c index 05cced59e251..f58b8543f6ac 100644 --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -312,6 +312,7 @@ static const struct acpi_device_id punit_ipc_acpi_ids[] = { { "INT34D4", 0 }, { } }; +MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids);

static struct platform_driver intel_punit_ipc_driver = { .probe = intel_punit_ipc_probe,

From: Steve French stfrench@microsoft.com

[ Upstream commit c0d46717b95735b0eacfddbcca9df37a49de9c7a ]

See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to 0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting it incorrectly).

Signed-off-by: Steve French stfrench@microsoft.com Reported-by: Stefan Metzmacher metze@samba.org Reviewed-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2pdu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index d424f431263c..562f88443b31 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -3891,10 +3891,10 @@ smb2_new_read_req(void **buf, unsigned int *total_len, * Related requests use info from previous read request * in chain. */ - shdr->SessionId = 0xFFFFFFFF; + shdr->SessionId = 0xFFFFFFFFFFFFFFFF; shdr->TreeId = 0xFFFFFFFF; - req->PersistentFileId = 0xFFFFFFFF; - req->VolatileFileId = 0xFFFFFFFF; + req->PersistentFileId = 0xFFFFFFFFFFFFFFFF; + req->VolatileFileId = 0xFFFFFFFFFFFFFFFF; } } if (remaining_bytes > io_parms->length)

From: Jingwen Chen Jingwen.Chen2@amd.com

[ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]

[Why] the gem object rfb->base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes

[How] put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes

Signed-off-by: Jingwen Chen Jingwen.Chen2@amd.com Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c index 1ea8af48ae2f..43f29ee0e3b0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c @@ -289,10 +289,13 @@ static int amdgpufb_create(struct drm_fb_helper *helper, static int amdgpu_fbdev_destroy(struct drm_device *dev, struct amdgpu_fbdev *rfbdev) { struct amdgpu_framebuffer *rfb = &rfbdev->rfb; + int i;

drm_fb_helper_unregister_fbi(&rfbdev->helper);

if (rfb->base.obj[0]) { + for (i = 0; i < rfb->base.format->num_planes; i++) + drm_gem_object_put(rfb->base.obj[0]); amdgpufb_destroy_pinned_object(rfb->base.obj[0]); rfb->base.obj[0] = NULL; drm_framebuffer_unregister_private(&rfb->base);

From: Lang Yu Lang.Yu@amd.com

[ Upstream commit 9c2876d56f1ce9b6b2072f1446fb1e8d1532cb3d ]

When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log:

[ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer

[ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario:

[ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK ***

[ 806.333747] May be due to missing lock nesting notation

[ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]

Signed-off-by: Lang Yu Lang.Yu@amd.com Acked-by: Christian KÃnig christian.koenig@amd.com Reviewed-by: Andrey Grodzovsky andrey.grodzovsky@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7f2689d4b86d..87c7c45f1bb7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4368,7 +4368,6 @@ static int amdgpu_do_asic_reset(struct amdgpu_hive_info *hive, r = amdgpu_ib_ring_tests(tmp_adev); if (r) { dev_err(tmp_adev->dev, "ib ring test failed (%d).\n", r); - r = amdgpu_device_ip_suspend(tmp_adev); need_full_reset = true; r = -EAGAIN; goto end;

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit e68671e9e1275dfdda333c3e83b6d28963af16b6 ]

Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB, without requiring any manual setup.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210520093228.7439-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index e1455f1d2472..3743d895399e 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -115,6 +115,32 @@ static const struct ts_dmi_data chuwi_hi10_plus_data = { .properties = chuwi_hi10_plus_props, };

+static const struct property_entry chuwi_hi10_pro_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 8), + PROPERTY_ENTRY_U32("touchscreen-min-y", 8), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1912), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1272), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data chuwi_hi10_pro_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hi10-pro.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 42504, + .sha256 = { 0xdb, 0x92, 0x68, 0xa8, 0xdb, 0x81, 0x31, 0x00, + 0x1f, 0x58, 0x89, 0xdb, 0x19, 0x1b, 0x15, 0x8c, + 0x05, 0x14, 0xf4, 0x95, 0xba, 0x15, 0x45, 0x98, + 0x42, 0xa3, 0xbb, 0x65, 0xe3, 0x30, 0xa5, 0x93 }, + }, + .acpi_name = "MSSL1680:00", + .properties = chuwi_hi10_pro_props, +}; + static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 4), PROPERTY_ENTRY_U32("touchscreen-min-y", 6), @@ -872,6 +898,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), }, }, + { + /* Chuwi Hi10 Prus (CWI597) */ + .driver_data = (void *)&chuwi_hi10_pro_data, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_PRODUCT_NAME, "Hi10 pro tablet"), + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + }, + }, { /* Chuwi Vi8 (CWI506) */ .driver_data = (void *)&chuwi_vi8_data,

From: Rikard Falkeborn rikard.falkeborn@gmail.com

[ Upstream commit f747e6667ebb2ffb8133486c9cd19800d72b0d98 ]

GENMASK() has an input check which uses __builtin_choose_expr() to enable a compile time sanity check of its inputs if they are known at compile time.

However, it turns out that __builtin_constant_p() does not always return a compile time constant [0]. It was thought this problem was fixed with gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvill... [0] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1] Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAK... [2] Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com Signed-off-by: Rikard Falkeborn rikard.falkeborn@gmail.com Reported-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Acked-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Cc: Ard Biesheuvel ardb@kernel.org Cc: Yury Norov yury.norov@gmail.com Cc: Peter Zijlstra peterz@infradead.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bits.h | 2 +- include/linux/const.h | 8 ++++++++ include/linux/minmax.h | 10 ++-------- tools/include/linux/bits.h | 2 +- tools/include/linux/const.h | 8 ++++++++ 5 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/include/linux/bits.h b/include/linux/bits.h index 7f475d59a097..87d112650dfb 100644 --- a/include/linux/bits.h +++ b/include/linux/bits.h @@ -22,7 +22,7 @@ #include <linux/build_bug.h> #define GENMASK_INPUT_CHECK(h, l) \ (BUILD_BUG_ON_ZERO(__builtin_choose_expr( \ - __builtin_constant_p((l) > (h)), (l) > (h), 0))) + __is_constexpr((l) > (h)), (l) > (h), 0))) #else /* * BUILD_BUG_ON_ZERO is not available in h files included from asm files, diff --git a/include/linux/const.h b/include/linux/const.h index 81b8aae5a855..435ddd72d2c4 100644 --- a/include/linux/const.h +++ b/include/linux/const.h @@ -3,4 +3,12 @@

#include <vdso/const.h>

+/* + * This returns a constant expression while determining if an argument is + * a constant expression, most importantly without evaluating the argument. + * Glory to Martin Uecker Martin.Uecker@med.uni-goettingen.de + */ +#define __is_constexpr(x) \ + (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) + #endif /* _LINUX_CONST_H */ diff --git a/include/linux/minmax.h b/include/linux/minmax.h index c0f57b0c64d9..5433c08fcc68 100644 --- a/include/linux/minmax.h +++ b/include/linux/minmax.h @@ -2,6 +2,8 @@ #ifndef _LINUX_MINMAX_H #define _LINUX_MINMAX_H

+#include <linux/const.h> + /* * min()/max()/clamp() macros must accomplish three things: * @@ -17,14 +19,6 @@ #define __typecheck(x, y) \ (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))

-/* - * This returns a constant expression while determining if an argument is - * a constant expression, most importantly without evaluating the argument. - * Glory to Martin Uecker Martin.Uecker@med.uni-goettingen.de - */ -#define __is_constexpr(x) \ - (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) - #define __no_side_effects(x, y) \ (__is_constexpr(x) && __is_constexpr(y))

diff --git a/tools/include/linux/bits.h b/tools/include/linux/bits.h index 7f475d59a097..87d112650dfb 100644 --- a/tools/include/linux/bits.h +++ b/tools/include/linux/bits.h @@ -22,7 +22,7 @@ #include <linux/build_bug.h> #define GENMASK_INPUT_CHECK(h, l) \ (BUILD_BUG_ON_ZERO(__builtin_choose_expr( \ - __builtin_constant_p((l) > (h)), (l) > (h), 0))) + __is_constexpr((l) > (h)), (l) > (h), 0))) #else /* * BUILD_BUG_ON_ZERO is not available in h files included from asm files, diff --git a/tools/include/linux/const.h b/tools/include/linux/const.h index 81b8aae5a855..435ddd72d2c4 100644 --- a/tools/include/linux/const.h +++ b/tools/include/linux/const.h @@ -3,4 +3,12 @@

#include <vdso/const.h>

+/* + * This returns a constant expression while determining if an argument is + * a constant expression, most importantly without evaluating the argument. + * Glory to Martin Uecker Martin.Uecker@med.uni-goettingen.de + */ +#define __is_constexpr(x) \ + (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) + #endif /* _LINUX_CONST_H */