From: dillon min dillon.minfei@gmail.com

commit 214b0e1ad01abf4c1f6d8d28fa096bf167e47cef upstream.

The offset of regmap is incorrect, j * 8 is move to the wrong register.

for example:

asume i = 0, j = 1. we want to set KPY5 as interrupt falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4, this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1.

Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver") Cc: Cc: stable@vger.kernel.org Signed-off-by: dillon min dillon.minfei@gmail.com Signed-off-by: Bartosz Golaszewski bgolaszewski@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpio/gpio-tc3589x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpio/gpio-tc3589x.c +++ b/drivers/gpio/gpio-tc3589x.c @@ -157,7 +157,7 @@ static void tc3589x_gpio_irq_sync_unlock continue;

tc3589x_gpio->oldregs[i][j] = new; - tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new); + tc3589x_reg_write(tc3589x, regmap[i] + j, new); } }

From: Jean Delvare jdelvare@suse.de

commit a39d0d7bdf8c21ac7645c02e9676b5cb2b804c31 upstream.

A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation.

Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly.

Signed-off-by: Jean Delvare jdelvare@suse.de Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost navid.emamdoost@gmail.com Cc: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -311,7 +311,7 @@ int amdgpu_crtc_set_config(struct drm_mo take the current one */ if (active && !adev->have_disp_power_ref) { adev->have_disp_power_ref = true; - goto out; + return ret; } /* if we have no active crtcs, then drop the power ref we got before */

From: Olympia Giannou ogiannou@gmail.com

[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ]

Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure.

In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time.

More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards.

The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix.

Signed-off-by: Olympia Giannou olympia.giannou@leica-geosystems.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/rndis_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 524a47a281207..b20b380d91bf6 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -213,7 +213,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) dev_dbg(&info->control->dev, "rndis response error, code %d\n", retval); } - msleep(20); + msleep(40); } dev_dbg(&info->control->dev, "rndis response timeout\n"); return -ETIMEDOUT;

From: Xie He xie.he.0141@gmail.com

[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ]

This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames.

1. Control frames in hdlc_cisco and hdlc_ppp

When these drivers send control frames, skb->protocol is not set.

This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC).

When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames.

2. hdlc_fr

When this driver sends control frames, skb->protocol is set to internal values used in this driver.

When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices).

However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).

When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices).

Cc: Krzysztof Halasa khc@pm.waw.pl Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/hdlc_cisco.c | 1 + drivers/net/wan/hdlc_fr.c | 3 +++ drivers/net/wan/hdlc_ppp.c | 1 + 3 files changed, 5 insertions(+)

diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index f8ed079d8bc3e..7a6f851d9843a 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -120,6 +120,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, skb_put(skb, sizeof(struct cisco_packet)); skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb);

dev_queue_xmit(skb); diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 89541cc90e877..74d46f7e77eaa 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -435,6 +435,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) if (pvc->state.fecn) /* TX Congestion counter */ dev->stats.tx_compressed++; skb->dev = pvc->frad; + skb->protocol = htons(ETH_P_HDLC); + skb_reset_network_header(skb); dev_queue_xmit(skb); return NETDEV_TX_OK; } @@ -557,6 +559,7 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) skb_put(skb, i); skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb);

dev_queue_xmit(skb); diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index a2559f213daed..473a9b8ec9ba5 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -254,6 +254,7 @@ static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code,

skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb); skb_queue_tail(&tx_queue, skb); }

From: Marek Szyprowski m.szyprowski@samsung.com

[ Upstream commit f3bb0f796f5ffe32f0fbdce5b1b12eb85511158f ]

The ChipID IO region has it's own clock, which is being disabled while scanning for unused clocks. It turned out that some CPU hotplug, CPU idle or even SOC firmware code depends on the reads from that area. Fix the mysterious hang caused by entering deep CPU idle state by ignoring the 'chipid' clock during unused clocks scan, as there are no direct clients for it which will keep it enabled.

Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Link: https://lore.kernel.org/r/20200922124046.10496-1-m.szyprowski@samsung.com Reviewed-by: Krzysztof Kozlowski krzk@kernel.org Acked-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/samsung/clk-exynos4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 6c8e45e007c84..8edbb20ccff5e 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -1059,7 +1059,7 @@ static struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { GATE(CLK_PCIE, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0), GATE(CLK_SMMU_PCIE, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), GATE(CLK_MODEMIF, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), - GATE(CLK_CHIPID, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(CLK_CHIPID, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, CLK_IGNORE_UNUSED, 0), GATE(CLK_SYSREG, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, CLK_IGNORE_UNUSED, 0), GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, @@ -1100,7 +1100,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { 0), GATE(CLK_TSADC, "tsadc", "aclk133", E4X12_GATE_BUS_FSYS1, 16, 0, 0), GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), - GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), + GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, CLK_IGNORE_UNUSED, 0), GATE(CLK_SYSREG, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, CLK_IGNORE_UNUSED, 0), GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0,

From: Nicolas VINCENT nicolas.vincent@vossloh.com

[ Upstream commit a2bd970aa62f2f7f80fd0d212b1d4ccea5df4aed ]

the i2c_ram structure is missing the sdmatmp field mentionned in datasheet for MPC8272 at paragraph 36.5. With this field missing, the hardware would write past the allocated memory done through cpm_muram_alloc for the i2c_ram structure and land in memory allocated for the buffers descriptors corrupting the cbd_bufaddr field. Since this field is only set during setup(), the first i2c transaction would work and the following would send data read from an arbitrary memory location.

Fixes: 61045dbe9d8d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers") Signed-off-by: Nicolas VINCENT nicolas.vincent@vossloh.com Acked-by: Jochen Friedrich jochen@scram.de Acked-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-cpm.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index b167ab25310a3..34a35e927fc6d 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -74,6 +74,9 @@ struct i2c_ram { char res1[4]; /* Reserved */ ushort rpbase; /* Relocation pointer */ char res2[2]; /* Reserved */ + /* The following elements are only for CPM2 */ + char res3[4]; /* Reserved */ + uint sdmatmp; /* Internal */ };

#define I2COM_START 0x80

From: Al Viro viro@zeniv.linux.org.uk

commit 18306c404abe18a0972587a6266830583c60c928 upstream.

removes the need to clear it, along with the races.

Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/eventpoll.c | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-)

--- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -217,8 +217,7 @@ struct eventpoll { struct file *file;

/* used to optimize loop detection check */ - int visited; - struct list_head visited_list_link; + u64 gen; };

/* Wait structure used by the poll hooks */ @@ -262,6 +261,8 @@ static long max_user_watches __read_most */ static DEFINE_MUTEX(epmutex);

+static u64 loop_check_gen = 0; + /* Used to check for epoll file descriptor inclusion loops */ static struct nested_calls poll_loop_ncalls;

@@ -277,9 +278,6 @@ static struct kmem_cache *epi_cache __re /* Slab cache used to allocate "struct eppoll_entry" */ static struct kmem_cache *pwq_cache __read_mostly;

-/* Visited nodes during ep_loop_check(), so we can unset them when we finish */ -static LIST_HEAD(visited_list); - /* * List of files with newly added links, where we may need to limit the number * of emanating paths. Protected by the epmutex. @@ -1696,13 +1694,12 @@ static int ep_loop_check_proc(void *priv struct epitem *epi;

mutex_lock_nested(&ep->mtx, call_nests + 1); - ep->visited = 1; - list_add(&ep->visited_list_link, &visited_list); + ep->gen = loop_check_gen; for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) { epi = rb_entry(rbp, struct epitem, rbn); if (unlikely(is_file_epoll(epi->ffd.file))) { ep_tovisit = epi->ffd.file->private_data; - if (ep_tovisit->visited) + if (ep_tovisit->gen == loop_check_gen) continue; error = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS, ep_loop_check_proc, epi->ffd.file, @@ -1743,18 +1740,8 @@ static int ep_loop_check_proc(void *priv */ static int ep_loop_check(struct eventpoll *ep, struct file *file) { - int ret; - struct eventpoll *ep_cur, *ep_next; - - ret = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS, + return ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS, ep_loop_check_proc, file, ep, current); - /* clear visited list */ - list_for_each_entry_safe(ep_cur, ep_next, &visited_list, - visited_list_link) { - ep_cur->visited = 0; - list_del(&ep_cur->visited_list_link); - } - return ret; }

static void clear_tfile_check_list(void) @@ -1956,6 +1943,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in error_tgt_fput: if (full_check) { clear_tfile_check_list(); + loop_check_gen++; mutex_unlock(&epmutex); }

From: Al Viro viro@zeniv.linux.org.uk

commit 3701cb59d892b88d569427586f01491552f377b1 upstream.

or get freed, for that matter, if it's a long (separately stored) name.

Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/eventpoll.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1232,7 +1232,7 @@ static int reverse_path_check(void)

static int ep_create_wakeup_source(struct epitem *epi) { - const char *name; + struct name_snapshot n; struct wakeup_source *ws;

if (!epi->ep->ws) { @@ -1241,8 +1241,9 @@ static int ep_create_wakeup_source(struc return -ENOMEM; }

- name = epi->ffd.file->f_path.dentry->d_name.name; - ws = wakeup_source_register(name); + take_dentry_name_snapshot(&n, epi->ffd.file->f_path.dentry); + ws = wakeup_source_register(n.name); + release_dentry_name_snapshot(&n);

if (!ws) return -ENOMEM;

From: Peilin Ye yepeilin.cs@gmail.com

commit bb0890b4cd7f8203e3aa99c6d0f062d6acdaad27 upstream.

drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all definitions into <linux/font.h>.

Since newport_con now uses four extra words, initialize the fourth word in newport_set_font() properly.

Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye yepeilin.cs@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd44... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/video/console/fbcon.h | 7 ------- drivers/video/console/fbcon_rotate.c | 1 + drivers/video/console/newport_con.c | 7 +------ drivers/video/console/tileblit.c | 1 + include/linux/font.h | 8 ++++++++ 5 files changed, 11 insertions(+), 13 deletions(-)

--- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -151,13 +151,6 @@ static inline int attr_col_ec(int shift, #define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0) #define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1)

-/* Font */ -#define REFCOUNT(fd) (((int *)(fd))[-1]) -#define FNTSIZE(fd) (((int *)(fd))[-2]) -#define FNTCHARCNT(fd) (((int *)(fd))[-3]) -#define FNTSUM(fd) (((int *)(fd))[-4]) -#define FONT_EXTRA_WORDS 4 - /* * Scroll Method */ --- a/drivers/video/console/fbcon_rotate.c +++ b/drivers/video/console/fbcon_rotate.c @@ -14,6 +14,7 @@ #include <linux/fb.h> #include <linux/vt_kern.h> #include <linux/console.h> +#include <linux/font.h> #include <asm/types.h> #include "fbcon.h" #include "fbcon_rotate.h" --- a/drivers/video/console/newport_con.c +++ b/drivers/video/console/newport_con.c @@ -35,12 +35,6 @@

#define FONT_DATA ((unsigned char *)font_vga_8x16.data)

-/* borrowed from fbcon.c */ -#define REFCOUNT(fd) (((int *)(fd))[-1]) -#define FNTSIZE(fd) (((int *)(fd))[-2]) -#define FNTCHARCNT(fd) (((int *)(fd))[-3]) -#define FONT_EXTRA_WORDS 3 - static unsigned char *font_data[MAX_NR_CONSOLES];

static struct newport_regs *npregs; @@ -522,6 +516,7 @@ static int newport_set_font(int unit, st FNTSIZE(new_data) = size; FNTCHARCNT(new_data) = op->charcount; REFCOUNT(new_data) = 0; /* usage counter */ + FNTSUM(new_data) = 0;

p = new_data; for (i = 0; i < op->charcount; i++) { --- a/drivers/video/console/tileblit.c +++ b/drivers/video/console/tileblit.c @@ -13,6 +13,7 @@ #include <linux/fb.h> #include <linux/vt_kern.h> #include <linux/console.h> +#include <linux/font.h> #include <asm/types.h> #include "fbcon.h"

--- a/include/linux/font.h +++ b/include/linux/font.h @@ -57,4 +57,12 @@ extern const struct font_desc *get_defau /* Max. length for the name of a predefined font */ #define MAX_FONT_NAME 32

+/* Extra word getters */ +#define REFCOUNT(fd) (((int *)(fd))[-1]) +#define FNTSIZE(fd) (((int *)(fd))[-2]) +#define FNTCHARCNT(fd) (((int *)(fd))[-3]) +#define FNTSUM(fd) (((int *)(fd))[-4]) + +#define FONT_EXTRA_WORDS 4 + #endif /* _VIDEO_FONT_H */

From: Geert Uytterhoeven geert+renesas@glider.be

commit 77972b55fb9d35d4a6b0abca99abffaa4ec6a85b upstream.

This reverts commit 1838d6c62f57836639bd3d83e7855e0ee4f6defc.

This commit moved the ravb_mdio_init() call (and thus the of_mdiobus_register() call) from the ravb_probe() to the ravb_open() call. This causes a regression during system resume (s2idle/s2ram), as new PHY devices cannot be bound while suspended.

During boot, the Micrel PHY is detected like this:

Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=228) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off

During system suspend, (A) defer_all_probes is set to true, and (B) usermodehelper_disabled is set to UMH_DISABLED, to avoid drivers being probed while suspended.

A. If CONFIG_MODULES=n, phy_device_register() calling device_add() merely adds the device, but does not probe it yet, as really_probe() returns early due to defer_all_probes being set:

dpm_resume+0x128/0x4f8 device_resume+0xcc/0x1b0 dpm_run_callback+0x74/0x340 ravb_resume+0x190/0x1b8 ravb_open+0x84/0x770 of_mdiobus_register+0x1e0/0x468 of_mdiobus_register_phy+0x1b8/0x250 of_mdiobus_phy_device_register+0x178/0x1e8 phy_device_register+0x114/0x1b8 device_add+0x3d4/0x798 bus_probe_device+0x98/0xa0 device_initial_probe+0x10/0x18 __device_attach+0xe4/0x140 bus_for_each_drv+0x64/0xc8 __device_attach_driver+0xb8/0xe0 driver_probe_device.part.11+0xc4/0xd8 really_probe+0x32c/0x3b8

Later, phy_attach_direct() notices no PHY driver has been bound, and falls back to the Generic PHY, leading to degraded operation:

Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off

B. If CONFIG_MODULES=y, request_module() returns early with -EBUSY due to UMH_DISABLED, and MDIO initialization fails completely:

mdio_bus e6800000.ethernet-ffffffff:00: error -16 loading PHY driver module for ID 0x00221622 ravb e6800000.ethernet eth0: failed to initialize MDIO PM: dpm_run_callback(): ravb_resume+0x0/0x1b8 returns -16 PM: Device e6800000.ethernet failed to resume: error -16

Ignoring -EBUSY in phy_request_driver_module(), like was done for -ENOENT in commit 21e194425abd65b5 ("net: phy: fix issue with loading PHY driver w/o initramfs"), would makes it fall back to the Generic PHY, like in the CONFIG_MODULES=n case.

Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Cc: stable@vger.kernel.org Reviewed-by: Sergei Shtylyov sergei.shtylyov@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/ethernet/renesas/ravb_main.c | 110 +++++++++++++++---------------- 1 file changed, 55 insertions(+), 55 deletions(-)

--- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1214,64 +1214,12 @@ static const struct ethtool_ops ravb_eth .get_ts_info = ravb_get_ts_info, };

-/* MDIO bus init function */ -static int ravb_mdio_init(struct ravb_private *priv) -{ - struct platform_device *pdev = priv->pdev; - struct device *dev = &pdev->dev; - int error; - - /* Bitbang init */ - priv->mdiobb.ops = &bb_ops; - - /* MII controller setting */ - priv->mii_bus = alloc_mdio_bitbang(&priv->mdiobb); - if (!priv->mii_bus) - return -ENOMEM; - - /* Hook up MII support for ethtool */ - priv->mii_bus->name = "ravb_mii"; - priv->mii_bus->parent = dev; - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", - pdev->name, pdev->id); - - /* Register MDIO bus */ - error = of_mdiobus_register(priv->mii_bus, dev->of_node); - if (error) - goto out_free_bus; - - return 0; - -out_free_bus: - free_mdio_bitbang(priv->mii_bus); - return error; -} - -/* MDIO bus release function */ -static int ravb_mdio_release(struct ravb_private *priv) -{ - /* Unregister mdio bus */ - mdiobus_unregister(priv->mii_bus); - - /* Free bitbang info */ - free_mdio_bitbang(priv->mii_bus); - - return 0; -} - /* Network device open function for Ethernet AVB */ static int ravb_open(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); int error;

- /* MDIO bus init */ - error = ravb_mdio_init(priv); - if (error) { - netdev_err(ndev, "failed to initialize MDIO\n"); - return error; - } - napi_enable(&priv->napi[RAVB_BE]); napi_enable(&priv->napi[RAVB_NC]);

@@ -1320,7 +1268,6 @@ out_free_irq: out_napi_off: napi_disable(&priv->napi[RAVB_NC]); napi_disable(&priv->napi[RAVB_BE]); - ravb_mdio_release(priv); return error; }

@@ -1614,8 +1561,6 @@ static int ravb_close(struct net_device ravb_ring_free(ndev, RAVB_BE); ravb_ring_free(ndev, RAVB_NC);

- ravb_mdio_release(priv); - return 0; }

@@ -1719,6 +1664,51 @@ static const struct net_device_ops ravb_ .ndo_change_mtu = eth_change_mtu, };

+/* MDIO bus init function */ +static int ravb_mdio_init(struct ravb_private *priv) +{ + struct platform_device *pdev = priv->pdev; + struct device *dev = &pdev->dev; + int error; + + /* Bitbang init */ + priv->mdiobb.ops = &bb_ops; + + /* MII controller setting */ + priv->mii_bus = alloc_mdio_bitbang(&priv->mdiobb); + if (!priv->mii_bus) + return -ENOMEM; + + /* Hook up MII support for ethtool */ + priv->mii_bus->name = "ravb_mii"; + priv->mii_bus->parent = dev; + snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + pdev->name, pdev->id); + + /* Register MDIO bus */ + error = of_mdiobus_register(priv->mii_bus, dev->of_node); + if (error) + goto out_free_bus; + + return 0; + +out_free_bus: + free_mdio_bitbang(priv->mii_bus); + return error; +} + +/* MDIO bus release function */ +static int ravb_mdio_release(struct ravb_private *priv) +{ + /* Unregister mdio bus */ + mdiobus_unregister(priv->mii_bus); + + /* Free bitbang info */ + free_mdio_bitbang(priv->mii_bus); + + return 0; +} + static const struct of_device_id ravb_match_table[] = { { .compatible = "renesas,etheravb-r8a7790", .data = (void *)RCAR_GEN2 }, { .compatible = "renesas,etheravb-r8a7794", .data = (void *)RCAR_GEN2 }, @@ -1857,6 +1847,13 @@ static int ravb_probe(struct platform_de eth_hw_addr_random(ndev); }

+ /* MDIO bus init */ + error = ravb_mdio_init(priv); + if (error) { + dev_err(&pdev->dev, "failed to initialize MDIO\n"); + goto out_dma_free; + } + netif_napi_add(ndev, &priv->napi[RAVB_BE], ravb_poll, 64); netif_napi_add(ndev, &priv->napi[RAVB_NC], ravb_poll, 64);

@@ -1876,6 +1873,8 @@ static int ravb_probe(struct platform_de out_napi_del: netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); + ravb_mdio_release(priv); +out_dma_free: dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); out_release: @@ -1900,6 +1899,7 @@ static int ravb_remove(struct platform_d unregister_netdev(ndev); netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); + ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev); free_netdev(ndev); platform_set_drvdata(pdev, NULL);

From: Anant Thazhemadam anant.thazhemadam@gmail.com

commit 3dc289f8f139997f4e9d3cfccf8738f20d23e47b upstream.

In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access.

Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0.

Cc: stable@vger.kernel.org Reported-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Tested-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam anant.thazhemadam@gmail.com Link: https://lore.kernel.org/r/20201007035401.9522-1-anant.thazhemadam@gmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/wireless/nl80211.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3101,6 +3101,9 @@ static int nl80211_del_key(struct sk_buf if (err) return err;

+ if (key.idx < 0) + return -EINVAL; + if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);

From: Tom Rix trix@redhat.com

commit 5f38b06db8af3ed6c2fc1b427504ca56fae2eacc upstream.

clang static analysis flags this represenative problem thinkpad_acpi.c:2523:7: warning: Branch condition evaluates to a garbage value if (!oldn->mute || ^~~~~~~~~~~

In hotkey_kthread() mute is conditionally set by hotkey_read_nvram() but unconditionally checked by hotkey_compare_and_issue_event(). So the tp_nvram_state variable s[2] needs to be initialized.

Fixes: 01e88f25985d ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)") Signed-off-by: Tom Rix trix@redhat.com Reviewed-by: Hans de Goede hdegoede@redhat.com Acked-by: mark gross mgross@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/platform/x86/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2474,7 +2474,7 @@ static void hotkey_compare_and_issue_eve */ static int hotkey_kthread(void *data) { - struct tp_nvram_state s[2]; + struct tp_nvram_state s[2] = { 0 }; u32 poll_mask, event_mask; unsigned int si, so; unsigned long t;

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

commit b292b50b0efcc7095d8bf15505fba6909bb35dce upstream.

syzbot is reporting hung task in wait_for_device_probe() [1]. At least, we always need to decrement probe_count if we incremented probe_count in really_probe().

However, since I can't find "Resources present before probing" message in the console log, both "this message simply flowed off" and "syzbot is not hitting this path" will be possible. Therefore, while we are at it, let's also prepare for concurrent wait_for_device_probe() calls by replacing wake_up() with wake_up_all().

[1] https://syzkaller.appspot.com/bug?id=25c833f1983c9c1d512f4ff860dd0d7f5a2e2c0...

Reported-by: syzbot syzbot+805f5f6ae37411f15b64@syzkaller.appspotmail.com Fixes: 7c35e699c88bd607 ("driver core: Print device when resources present in really_probe()") Cc: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20200713021254.3444-1-penguin-kernel@I-love.SAKURA... [iwamatsu: Drop patch for deferred_probe_timeout_work_func()] Signed-off-by: Nobuhiro Iwamatsu (CIP) nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/base/dd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -285,7 +285,8 @@ static int really_probe(struct device *d drv->bus->name, __func__, drv->name, dev_name(dev)); if (!list_empty(&dev->devres_head)) { dev_crit(dev, "Resources present before probing\n"); - return -EBUSY; + ret = -EBUSY; + goto done; }

dev->driver = drv; @@ -363,7 +364,7 @@ probe_failed: ret = 0; done: atomic_dec(&probe_count); - wake_up(&probe_waitqueue); + wake_up_all(&probe_waitqueue); return ret; }

From: Eric Dumazet edumazet@google.com

commit d42ee76ecb6c49d499fc5eb32ca34468d95dbc3e upstream.

After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot:

BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874

CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Vlad Yasevich vyasevich@gmail.com Cc: Neil Horman nhorman@tuxdriver.com Cc: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/sctp/auth.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -496,6 +496,7 @@ int sctp_auth_init_hmacs(struct sctp_end out_err: /* Clean up any successful allocations */ sctp_auth_destroy_hmacs(ep->auth_hmacs); + ep->auth_hmacs = NULL; return -ENOMEM; }

From: Anant Thazhemadam anant.thazhemadam@gmail.com

commit 9a9e77495958c7382b2438bc19746dd3aaaabb8e upstream.

The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed.

The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2.

Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused.

This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1).

Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam anant.thazhemadam@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/team/team.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -285,7 +285,7 @@ inst_rollback: for (i--; i >= 0; i--) __team_option_inst_del_option(team, dst_opts[i]);

- i = option_count - 1; + i = option_count; alloc_rollback: for (i--; i >= 0; i--) kfree(dst_opts[i]);

From: Antony Antony antony.antony@secunet.com

[ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ]

XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE

v1->v2: - move curleft cloning to a separate patch

Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by: Antony Antony antony.antony@secunet.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/xfrm.h | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 89685c7bc7c0f..7a9c18deaa512 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1730,21 +1730,17 @@ static inline int xfrm_replay_state_esn_len(struct xfrm_replay_state_esn *replay static inline int xfrm_replay_clone(struct xfrm_state *x, struct xfrm_state *orig) { - x->replay_esn = kzalloc(xfrm_replay_state_esn_len(orig->replay_esn), + + x->replay_esn = kmemdup(orig->replay_esn, + xfrm_replay_state_esn_len(orig->replay_esn), GFP_KERNEL); if (!x->replay_esn) return -ENOMEM; - - x->replay_esn->bmp_len = orig->replay_esn->bmp_len; - x->replay_esn->replay_window = orig->replay_esn->replay_window; - - x->preplay_esn = kmemdup(x->replay_esn, - xfrm_replay_state_esn_len(x->replay_esn), + x->preplay_esn = kmemdup(orig->preplay_esn, + xfrm_replay_state_esn_len(orig->preplay_esn), GFP_KERNEL); - if (!x->preplay_esn) { - kfree(x->replay_esn); + if (!x->preplay_esn) return -ENOMEM; - }

return 0; }

From: Voon Weifeng weifeng.voon@intel.com

[ Upstream commit 7241c5a697479c7d0c5a96595822cdab750d41ae ]

EEE should be only be enabled during stmmac_mac_link_up() when the link are up and being set up properly. set_eee should only do settings configuration and disabling the eee.

Without this fix, turning on EEE using ethtool will return "Operation not supported". This is due to the driver is in a dead loop waiting for eee to be advertised in the for eee to be activated but the driver will only configure the EEE advertisement after the eee is activated.

Ethtool should only return "Operation not supported" if there is no EEE capbility in the MAC controller.

Fixes: 8a7493e58ad6 ("net: stmmac: Fix a race in EEE enable callback") Signed-off-by: Voon Weifeng weifeng.voon@intel.com Acked-by: Mark Gross mgross@linux.intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index fbf701e5f1e9f..6fe441696882d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -616,23 +616,16 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev, struct stmmac_priv *priv = netdev_priv(dev); int ret;

- if (!edata->eee_enabled) { + if (!priv->dma_cap.eee) + return -EOPNOTSUPP; + + if (!edata->eee_enabled) stmmac_disable_eee_mode(priv); - } else { - /* We are asking for enabling the EEE but it is safe - * to verify all by invoking the eee_init function. - * In case of failure it will return an error. - */ - edata->eee_enabled = stmmac_eee_init(priv); - if (!edata->eee_enabled) - return -EOPNOTSUPP; - }

ret = phy_ethtool_set_eee(dev->phydev, edata); if (ret) return ret;

- priv->eee_enabled = edata->eee_enabled; priv->tx_lpi_timer = edata->tx_lpi_timer; return 0; }

From: Eric Dumazet edumazet@google.com

[ Upstream commit f32f19339596b214c208c0dba716f4b6cc4f6958 ]

syzbot managed to crash a host by creating a bond with a GRE device.

For non Ethernet device, bonding calls bond_setup_by_slave() instead of ether_setup(), and unfortunately dev->needed_headroom was not copied from the new added member.

[ 171.243095] skbuff: skb_under_panic: text:ffffffffa184b9ea len:116 put:20 head:ffff883f84012dc0 data:ffff883f84012dbc tail:0x70 end:0xd00 dev:bond0 [ 171.243111] ------------[ cut here ]------------ [ 171.243112] kernel BUG at net/core/skbuff.c:112! [ 171.243117] invalid opcode: 0000 [#1] SMP KASAN PTI [ 171.243469] gsmi: Log Shutdown Reason 0x03 [ 171.243505] Call Trace: [ 171.243506] <IRQ> [ 171.243512] [<ffffffffa171be59>] skb_push+0x49/0x50 [ 171.243516] [<ffffffffa184b9ea>] ipgre_header+0x2a/0xf0 [ 171.243520] [<ffffffffa17452d7>] neigh_connected_output+0xb7/0x100 [ 171.243524] [<ffffffffa186f1d3>] ip6_finish_output2+0x383/0x490 [ 171.243528] [<ffffffffa186ede2>] __ip6_finish_output+0xa2/0x110 [ 171.243531] [<ffffffffa186acbc>] ip6_finish_output+0x2c/0xa0 [ 171.243534] [<ffffffffa186abe9>] ip6_output+0x69/0x110 [ 171.243537] [<ffffffffa186ac90>] ? ip6_output+0x110/0x110 [ 171.243541] [<ffffffffa189d952>] mld_sendpack+0x1b2/0x2d0 [ 171.243544] [<ffffffffa189d290>] ? mld_send_report+0xf0/0xf0 [ 171.243548] [<ffffffffa189c797>] mld_ifc_timer_expire+0x2d7/0x3b0 [ 171.243551] [<ffffffffa189c4c0>] ? mld_gq_timer_expire+0x50/0x50 [ 171.243556] [<ffffffffa0fea270>] call_timer_fn+0x30/0x130 [ 171.243559] [<ffffffffa0fea17c>] expire_timers+0x4c/0x110 [ 171.243563] [<ffffffffa0fea0e3>] __run_timers+0x213/0x260 [ 171.243566] [<ffffffffa0fecb7d>] ? ktime_get+0x3d/0xa0 [ 171.243570] [<ffffffffa0ff9c4e>] ? clockevents_program_event+0x7e/0xe0 [ 171.243574] [<ffffffffa0f7e5d5>] ? sched_clock_cpu+0x15/0x190 [ 171.243577] [<ffffffffa0fe973d>] run_timer_softirq+0x1d/0x40 [ 171.243581] [<ffffffffa1c00152>] __do_softirq+0x152/0x2f0 [ 171.243585] [<ffffffffa0f44e1f>] irq_exit+0x9f/0xb0 [ 171.243588] [<ffffffffa1a02e1d>] smp_apic_timer_interrupt+0xfd/0x1a0 [ 171.243591] [<ffffffffa1a01ea6>] apic_timer_interrupt+0x86/0x90

Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index aaf75d5e6e480..5811235a64c89 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1132,6 +1132,7 @@ static void bond_setup_by_slave(struct net_device *bond_dev,

bond_dev->type = slave_dev->type; bond_dev->hard_header_len = slave_dev->hard_header_len; + bond_dev->needed_headroom = slave_dev->needed_headroom; bond_dev->addr_len = slave_dev->addr_len;

memcpy(bond_dev->broadcast, slave_dev->broadcast,

From: David Howells dhowells@redhat.com

[ Upstream commit 9a059cd5ca7d9c5c4ca5a6e755cf72f230176b6a ]

If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a type it doesn't recognise, it can BUG in a couple of places, which is unnecessary as it can easily get back to userspace.

Fix this to print an error message instead.

Fixes: 99455153d067 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/ar-key.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c index 543d200f4fa14..20549c13eb13d 100644 --- a/net/rxrpc/ar-key.c +++ b/net/rxrpc/ar-key.c @@ -1114,7 +1114,8 @@ static long rxrpc_read(const struct key *key, break;

default: /* we have a ticket we can't encode */ - BUG(); + pr_err("Unsupported key token type (%u)\n", + token->security_index); continue; }

@@ -1235,7 +1236,6 @@ static long rxrpc_read(const struct key *key, break;

default: - BUG(); break; }

From: Anant Thazhemadam anant.thazhemadam@gmail.com

commit f45a4248ea4cc13ed50618ff066849f9587226b2 upstream.

When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers().

If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()).

Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead.

Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by: Petko Manolov petkan@nucleusys.com Signed-off-by: Anant Thazhemadam anant.thazhemadam@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/usb/rtl8150.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -277,12 +277,20 @@ static int write_mii_word(rtl8150_t * de return 1; }

-static inline void set_ethernet_addr(rtl8150_t * dev) +static void set_ethernet_addr(rtl8150_t *dev) { - u8 node_id[6]; + u8 node_id[ETH_ALEN]; + int ret;

- get_registers(dev, IDR, sizeof(node_id), node_id); - memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id)); + ret = get_registers(dev, IDR, sizeof(node_id), node_id); + + if (ret == sizeof(node_id)) { + ether_addr_copy(dev->netdev->dev_addr, node_id); + } else { + eth_hw_addr_random(dev->netdev); + netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n", + dev->netdev->dev_addr); + } }

static int rtl8150_set_mac_address(struct net_device *netdev, void *p)