Hi,

On Mon, Dec 18, 2017 at 12:41:16PM +0100, gregkh@linuxfoundation.org wrote:

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From bd3486ded7a0c313a6575343e6c2b21d14476645 Mon Sep 17 00:00:00 2001 From: Bin Liu b-liu@ti.com Date: Tue, 5 Dec 2017 08:45:30 -0600 Subject: [PATCH] usb: musb: da8xx: fix babble condition handling

When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt.

In this case, we should handle the babble interrupt first and recover from the babble condition.

This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly.

Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Bin Liu b-liu@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0397606a211b..6c036de63272 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer);

This line causes the conflict. I have sent the new patch for the stable trees.

Regards, -Bin.

• } else {
  

• } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) {
  

• 	/*
  

• 	 * When babble condition happens, drvvbus interrupt
  

• 	 * is also generated. Ignore this drvvbus interrupt
  

• 	 * and let babble interrupt handler recovers the
  

• 	 * controller; otherwise, the host-mode flag is lost
  

• 	 * due to the MUSB_DEV_MODE() call below and babble
  

• 	 * recovery logic will not be called.
  

• 	 */
  musb->is_active = 0;
  MUSB_DEV_MODE(musb);
  otg->default_a = 0;