On Wed, Jan 11, 2023, at 07:16, Naresh Kamboju wrote:
On Tue, 10 Jan 2023 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
Results from Linaro’s test farm. Regressions on arm64 Raspberry Pi 4 Model B.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
While running LTP controllers cgroup_fj_stress_blkio test cases the Insufficient stack space to handle exception! occurred and followed by kernel panic on arm64 Raspberry Pi 4 Model B with clang-15 built kernel Image.
The full boot and test log attached to this email and build and Kconfig links provided in the bottom of this email.
I will try to reproduce this reported issue and get back to you.
I looked at the log between 6.0.18 and 6.0.19-rc1, but don't see any arm64 or memory management patches that could result in this. Do you know if 6.0.18 ran successfull
[ 2893.044339] Insufficient stack space to handle exception! [ 2893.044351] ESR: 0x0000000096000047 -- DABT (current EL) [ 2893.044360] FAR: 0xffff8000128180d0 [ 2893.044364] Task stack: [0xffff800012a18000..0xffff800012a1c000] [ 2893.044370] IRQ stack: [0xffff80000a798000..0xffff80000a79c000] [ 2893.044375] Overflow stack: [0xffff0000f77c4310..0xffff0000f77c5310]
...
[ 2893.044413] pc : el1h_64_sync+0x0/0x68 [ 2893.044430] lr : wp_page_copy+0xf8/0x90c [ 2893.044445] sp : ffff8000128180d0
...
[ 2893.044692] el1h_64_sync+0x0/0x68 [ 2893.044700] do_wp_page+0x4a0/0x5c8 [ 2893.044708] handle_mm_fault+0x7fc/0x14dc [ 2893.044718] do_page_fault+0x29c/0x450 [ 2893.044727] do_mem_abort+0x4c/0xf8 [ 2893.044741] el0_da+0x48/0xa8 [ 2893.044750] el0t_64_sync_handler+0xcc/0xf0 [ 2893.044759] el0t_64_sync+0x18c/0x190
It claims that the stack overflow happened in do_wp_page(), but that has a really short call chain. It would be good to have the source line for do_wp_page+0x4a0/0x5c8 and wp_page_copy+0xf8/0x90c to see where exactly it was.
[ 2893.285975] WARNING: CPU: 2 PID: 315758 at kernel/sched/core.c:3119 set_task_cpu+0x14c/0x208
....
[ 2893.286117] CPU: 2 PID: 315758 Comm: cgroup_fj_stres Not tainted [ 2893.286416] arch_timer_handler_phys+0x44/0x54 [ 2893.286427] handle_percpu_devid_irq+0x90/0x220 [ 2893.286439] generic_handle_domain_irq+0x38/0x50 [ 2893.286447] gic_handle_irq+0x68/0xe8 [ 2893.286455] el1_interrupt+0x88/0xc8 [ 2893.286464] el1h_64_irq_handler+0x18/0x24 [ 2893.286474] el1h_64_irq+0x64/0x68 [ 2893.286482] panic+0x2d8/0x374
This is apparently a second unrelated bug -- it still processes timer interrupts after calling panic() and this apparently fails because the system is already unusable.
artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
file not found. I tried to get the vmlinux file to look at the disassembly but the artifacts appear to be gone already.
Arnd
On Wed, 11 Jan 2023 at 13:48, Arnd Bergmann arnd@arndb.de wrote:
On Wed, Jan 11, 2023, at 07:16, Naresh Kamboju wrote:
On Tue, 10 Jan 2023 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
Results from Linaro’s test farm. Regressions on arm64 Raspberry Pi 4 Model B.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
While running LTP controllers cgroup_fj_stress_blkio test cases the Insufficient stack space to handle exception! occurred and followed by kernel panic on arm64 Raspberry Pi 4 Model B with clang-15 built kernel Image.
The full boot and test log attached to this email and build and Kconfig links provided in the bottom of this email.
I will try to reproduce this reported issue and get back to you.
I looked at the log between 6.0.18 and 6.0.19-rc1, but don't see any arm64 or memory management patches that could result in this. Do you know if 6.0.18 ran successful
Yes, it ran successfully on 6.0.18.
On the same kernel 6.0.19-rc1 built with gcc-12 did not find this panic. The reported issue is specific to clang-15 build.
[ 2893.044339] Insufficient stack space to handle exception! [ 2893.044351] ESR: 0x0000000096000047 -- DABT (current EL) [ 2893.044360] FAR: 0xffff8000128180d0 [ 2893.044364] Task stack: [0xffff800012a18000..0xffff800012a1c000] [ 2893.044370] IRQ stack: [0xffff80000a798000..0xffff80000a79c000] [ 2893.044375] Overflow stack: [0xffff0000f77c4310..0xffff0000f77c5310]
...
[ 2893.044413] pc : el1h_64_sync+0x0/0x68 [ 2893.044430] lr : wp_page_copy+0xf8/0x90c [ 2893.044445] sp : ffff8000128180d0
...
[ 2893.044692] el1h_64_sync+0x0/0x68 [ 2893.044700] do_wp_page+0x4a0/0x5c8 [ 2893.044708] handle_mm_fault+0x7fc/0x14dc [ 2893.044718] do_page_fault+0x29c/0x450 [ 2893.044727] do_mem_abort+0x4c/0xf8 [ 2893.044741] el0_da+0x48/0xa8 [ 2893.044750] el0t_64_sync_handler+0xcc/0xf0 [ 2893.044759] el0t_64_sync+0x18c/0x190
It claims that the stack overflow happened in do_wp_page(), but that has a really short call chain. It would be good to have the source line for do_wp_page+0x4a0/0x5c8 and wp_page_copy+0xf8/0x90c to see where exactly it was.
[ 2893.285975] WARNING: CPU: 2 PID: 315758 at kernel/sched/core.c:3119 set_task_cpu+0x14c/0x208
....
[ 2893.286117] CPU: 2 PID: 315758 Comm: cgroup_fj_stres Not tainted [ 2893.286416] arch_timer_handler_phys+0x44/0x54 [ 2893.286427] handle_percpu_devid_irq+0x90/0x220 [ 2893.286439] generic_handle_domain_irq+0x38/0x50 [ 2893.286447] gic_handle_irq+0x68/0xe8 [ 2893.286455] el1_interrupt+0x88/0xc8 [ 2893.286464] el1h_64_irq_handler+0x18/0x24 [ 2893.286474] el1h_64_irq+0x64/0x68 [ 2893.286482] panic+0x2d8/0x374
This is apparently a second unrelated bug -- it still processes timer interrupts after calling panic() and this apparently fails because the system is already unusable.
artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Adding " / " at end works. https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
file not found. I tried to get the vmlinux file to look at the disassembly but the artifacts appear to be gone already.
System.map: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
vmlinux: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Sorry for the trouble.
- Naresh
Arnd
On Wed, Jan 11, 2023, at 10:31, Naresh Kamboju wrote:
On Wed, 11 Jan 2023 at 13:48, Arnd Bergmann arnd@arndb.de wrote:
On Wed, Jan 11, 2023, at 07:16, Naresh Kamboju wrote:
On Tue, 10 Jan 2023 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
Yes, it ran successfully on 6.0.18.
On the same kernel 6.0.19-rc1 built with gcc-12 did not find this panic. The reported issue is specific to clang-15 build.
Ok, and was the 6.0.18 build using the exact same clang-15 toolchain, or could there have been an update to any of the tools?
Have you seen results with older clang releases?
[ 2893.044339] Insufficient stack space to handle exception! [ 2893.044351] ESR: 0x0000000096000047 -- DABT (current EL) [ 2893.044360] FAR: 0xffff8000128180d0 [ 2893.044364] Task stack: [0xffff800012a18000..0xffff800012a1c000] [ 2893.044370] IRQ stack: [0xffff80000a798000..0xffff80000a79c000] [ 2893.044375] Overflow stack: [0xffff0000f77c4310..0xffff0000f77c5310]
...
[ 2893.044413] pc : el1h_64_sync+0x0/0x68 [ 2893.044430] lr : wp_page_copy+0xf8/0x90c [ 2893.044445] sp : ffff8000128180d0
...
[ 2893.044646] panic+0x168/0x374 [ 2893.044658] test_taint+0x0/0x38 [ 2893.044667] panic_bad_stack+0x110/0x124 [ 2893.044675] handle_bad_stack+0x34/0x48 [ 2893.044685] __bad_stack+0x78/0x7c [ 2893.044692] el1h_64_sync+0x0/0x68 [ 2893.044700] do_wp_page+0x4a0/0x5c8 [ 2893.044708] handle_mm_fault+0x7fc/0x14dc [ 2893.044718] do_page_fault+0x29c/0x450 [ 2893.044727] do_mem_abort+0x4c/0xf8 [ 2893.044741] el0_da+0x48/0xa8 [ 2893.044750] el0t_64_sync_handler+0xcc/0xf0 [ 2893.044759] el0t_64_sync+0x18c/0x190
It claims that the stack overflow happened in do_wp_page(), but that has a really short call chain. It would be good to have the source line for do_wp_page+0x4a0/0x5c8 and wp_page_copy+0xf8/0x90c to see where exactly it was.
artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Adding " / " at end works. https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Ok, I disassembled the image to see what happened.
do_wp_page+0x4a0/0x5c8 is the call to wp_page_copy(), so I would guess the el1h_64_sync fault actually happened in that function.
lr : wp_page_copy+0xf8/0x90c the return address from __mem_cgroup_charge(), but I suspect it's not where the fault happened either, just the last address that was in the link register.
el1h_64_sync+0x0/0x68 is a "paciasp" pointer authentication instruction.
__bad_stack is actually called from 'vectors', which has this code for calling el1h_64_sync, from kernel_ventry:
ffff800008011200: d10543ff sub sp, sp, #0x150 ffff800008011204: 8b2063ff add sp, sp, x0 ffff800008011208: cb2063e0 sub x0, sp, x0 ffff80000801120c: 37700080 tbnz w0, #14, ffff80000801121c <vectors+0x21c> ffff800008011210: cb2063e0 sub x0, sp, x0 ffff800008011214: cb2063ff sub sp, sp, x0 ffff800008011218: 14000201 b ffff800008011a1c <el1h_64_sync> ffff80000801121c: d51bd040 msr tpidr_el0, x0 ffff800008011220: cb2063e0 sub x0, sp, x0 ffff800008011224: d51bd060 msr tpidrro_el0, x0 ffff800008011228: f0010a80 adrp x0, ffff80000a164000 <overflow_stack+0xcf0> ffff80000801122c: 910c401f add sp, x0, #0x310 ffff800008011230: d538d080 mrs x0, tpidr_el1 ffff800008011234: 8b2063ff add sp, sp, x0 ffff800008011238: d53bd040 mrs x0, tpidr_el0 ffff80000801123c: cb2063e0 sub x0, sp, x0 ffff800008011240: f274cc1f tst x0, #0xfffffffffffff000 ffff800008011244: 54002de1 b.ne ffff800008011800 <__bad_stack> // b.any ffff800008011248: cb2063ff sub sp, sp, x0 ffff80000801124c: d53bd060 mrs x0, tpidrro_el0 ffff800008011250: 140001f3 b ffff800008011a1c <el1h_64_sync>
and here I'm lost now.
Arnd
On Wed, 11 Jan 2023 at 16:48, Arnd Bergmann arnd@arndb.de wrote:
On Wed, Jan 11, 2023, at 10:31, Naresh Kamboju wrote:
On Wed, 11 Jan 2023 at 13:48, Arnd Bergmann arnd@arndb.de wrote:
On Wed, Jan 11, 2023, at 07:16, Naresh Kamboju wrote:
On Tue, 10 Jan 2023 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
Yes, it ran successfully on 6.0.18.
On the same kernel 6.0.19-rc1 built with gcc-12 did not find this panic. The reported issue is specific to clang-15 build.
After retesting a couple of times it is confirmed that it is not reproducible.
Ok, and was the 6.0.18 build using the exact same clang-15 toolchain, or could there have been an update to any of the tools?
it is same Clang version 15.0.6
Have you seen results with older clang releases?
We are not testing with older clang versions.
[ 2893.044339] Insufficient stack space to handle exception! [ 2893.044351] ESR: 0x0000000096000047 -- DABT (current EL) [ 2893.044360] FAR: 0xffff8000128180d0 [ 2893.044364] Task stack: [0xffff800012a18000..0xffff800012a1c000] [ 2893.044370] IRQ stack: [0xffff80000a798000..0xffff80000a79c000] [ 2893.044375] Overflow stack: [0xffff0000f77c4310..0xffff0000f77c5310]
...
[ 2893.044413] pc : el1h_64_sync+0x0/0x68 [ 2893.044430] lr : wp_page_copy+0xf8/0x90c [ 2893.044445] sp : ffff8000128180d0
...
[ 2893.044646] panic+0x168/0x374 [ 2893.044658] test_taint+0x0/0x38 [ 2893.044667] panic_bad_stack+0x110/0x124 [ 2893.044675] handle_bad_stack+0x34/0x48 [ 2893.044685] __bad_stack+0x78/0x7c [ 2893.044692] el1h_64_sync+0x0/0x68 [ 2893.044700] do_wp_page+0x4a0/0x5c8 [ 2893.044708] handle_mm_fault+0x7fc/0x14dc [ 2893.044718] do_page_fault+0x29c/0x450 [ 2893.044727] do_mem_abort+0x4c/0xf8 [ 2893.044741] el0_da+0x48/0xa8 [ 2893.044750] el0t_64_sync_handler+0xcc/0xf0 [ 2893.044759] el0t_64_sync+0x18c/0x190
It claims that the stack overflow happened in do_wp_page(), but that has a really short call chain. It would be good to have the source line for do_wp_page+0x4a0/0x5c8 and wp_page_copy+0xf8/0x90c to see where exactly it was.
artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Adding " / " at end works. https://storage.tuxsuite.com/public/linaro/lkft/builds/2K9JDtix2mHMoYRjNkBef...
Ok, I disassembled the image to see what happened.
do_wp_page+0x4a0/0x5c8 is the call to wp_page_copy(), so I would guess the el1h_64_sync fault actually happened in that function.
lr : wp_page_copy+0xf8/0x90c the return address from __mem_cgroup_charge(), but I suspect it's not where the fault happened either, just the last address that was in the link register.
el1h_64_sync+0x0/0x68 is a "paciasp" pointer authentication instruction.
__bad_stack is actually called from 'vectors', which has this code for calling el1h_64_sync, from kernel_ventry:
ffff800008011200: d10543ff sub sp, sp, #0x150 ffff800008011204: 8b2063ff add sp, sp, x0 ffff800008011208: cb2063e0 sub x0, sp, x0 ffff80000801120c: 37700080 tbnz w0, #14, ffff80000801121c <vectors+0x21c> ffff800008011210: cb2063e0 sub x0, sp, x0 ffff800008011214: cb2063ff sub sp, sp, x0 ffff800008011218: 14000201 b ffff800008011a1c <el1h_64_sync> ffff80000801121c: d51bd040 msr tpidr_el0, x0 ffff800008011220: cb2063e0 sub x0, sp, x0 ffff800008011224: d51bd060 msr tpidrro_el0, x0 ffff800008011228: f0010a80 adrp x0, ffff80000a164000 <overflow_stack+0xcf0> ffff80000801122c: 910c401f add sp, x0, #0x310 ffff800008011230: d538d080 mrs x0, tpidr_el1 ffff800008011234: 8b2063ff add sp, sp, x0 ffff800008011238: d53bd040 mrs x0, tpidr_el0 ffff80000801123c: cb2063e0 sub x0, sp, x0 ffff800008011240: f274cc1f tst x0, #0xfffffffffffff000 ffff800008011244: 54002de1 b.ne ffff800008011800 <__bad_stack> // b.any ffff800008011248: cb2063ff sub sp, sp, x0 ffff80000801124c: d53bd060 mrs x0, tpidrro_el0 ffff800008011250: 140001f3 b ffff800008011a1c <el1h_64_sync>
and here I'm lost now.
Arnd
linux-stable-mirror@lists.linaro.org
-
Arnd Bergmann -
Naresh Kamboju