The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x e2c85d85a05f16af2223fcc0195ff50a7938b372 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024100739-baked-blizzard-0044@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:

e2c85d85a05f ("i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()") 3b7d81f08a6a ("i2c: qcom-geni: Grow a dev pointer to simplify code") b2ca8800621b ("i2c: qcom-geni: Let firmware specify irq trigger flags")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From e2c85d85a05f16af2223fcc0195ff50a7938b372 Mon Sep 17 00:00:00 2001 From: Jinjie Ruan ruanjinjie@huawei.com Date: Thu, 12 Sep 2024 11:34:59 +0800 Subject: [PATCH] i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()

disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com Cc: stable@vger.kernel.org # v4.19+ Acked-by: Mukesh Kumar Savaliya quic_msavaliy@quicinc.com Reviewed-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Signed-off-by: Andi Shyti andi.shyti@kernel.org

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 06e836e3e877..4c9050a4d58e 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -818,15 +818,13 @@ static int geni_i2c_probe(struct platform_device *pdev) init_completion(&gi2c->done); spin_lock_init(&gi2c->lock); platform_set_drvdata(pdev, gi2c); - ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0, + ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, IRQF_NO_AUTOEN, dev_name(dev), gi2c); if (ret) { dev_err(dev, "Request_irq failed:%d: err:%d\n", gi2c->irq, ret); return ret; } - /* Disable the interrupt so that the system can enter low-power mode */ - disable_irq(gi2c->irq); i2c_set_adapdata(&gi2c->adap, gi2c); gi2c->adap.dev.parent = dev; gi2c->adap.dev.of_node = dev->of_node;