With a wl1251 child node of mmc3 in the device tree decoded in omap_hsmmc.c to handle special wl1251 initialization, we do no longer need to instantiate the mmc3 through pdata quirks.

We also can remove the wlan regulator and reset/interrupt definitions and do them through device tree.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")

Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Cc: stable@vger.kernel.org # 4.7.0 --- arch/arm/mach-omap2/pdata-quirks.c | 93 ------------------------------ 1 file changed, 93 deletions(-)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 800a602c06ec..1b7cf81ff035 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -310,108 +310,15 @@ static void __init omap3_logicpd_torpedo_init(void) }

/* omap3pandora legacy devices */ -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23

static struct platform_device pandora_backlight = { .name = "pandora-backlight", .id = -1, };

-static struct regulator_consumer_supply pandora_vmmc3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), -}; - -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name = "vwlan", - .microvolts = 1800000, /* 1.8V */ - .gpio = PANDORA_WIFI_NRESET_GPIO, - .startup_delay = 50000, /* 50ms */ - .enable_high = 1, - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static void pandora_wl1251_init_card(struct mmc_card *card) -{ - /* - * We have TI wl1251 attached to MMC3. Pass this information to - * SDIO core because it can't be probed by normal methods. - */ - if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 24000000; - card->ocr = 0x80; - } -} - -static struct omap2_hsmmc_info pandora_mmc3[] = { - { - .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .init_card = pandora_wl1251_init_card, - }, - {} /* Terminator */ -}; - -static void __init pandora_wl1251_init(void) -{ - struct wl1251_platform_data pandora_wl1251_pdata; - int ret; - - memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio = -1; - - ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); - if (ret < 0) - goto fail; - - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); - if (pandora_wl1251_pdata.irq < 0) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret = wl1251_set_platform_data(&pandora_wl1251_pdata); - if (ret < 0) - goto fail_irq; - - return; - -fail_irq: - gpio_free(PANDORA_WIFI_IRQ_GPIO); -fail: - pr_err("wl1251 board initialisation failed\n"); -} - static void __init omap3_pandora_legacy_init(void) { platform_device_register(&pandora_backlight); - platform_device_register(&pandora_vwlan_device); - omap_hsmmc_init(pandora_mmc3); - omap_hsmmc_late_init(pandora_mmc3); - pandora_wl1251_init(); } #endif /* CONFIG_ARCH_OMAP3 */