From: Niklas Cassel niklas.cassel@wdc.com

commit 6045ab5fea4c849153ebeb0acb532da5f29d69c4 upstream.

bFLT binaries are usually created using elf2flt.

The linker script used by elf2flt has defined the .data section like the following for the last 19 years:

.data : { _sdata = . ; __data_start = . ; data_start = . ; *(.got.plt) *(.got) FILL(0) ; . = ALIGN(0x20) ; LONG(-1) . = ALIGN(0x20) ; ... }

It places the .got.plt input section before the .got input section. The same is true for the default linker script (ld --verbose) on most architectures except x86/x86-64.

The binfmt_flat loader should relocate all GOT entries until it encounters a -1 (the LONG(-1) in the linker script).

The problem is that the .got.plt input section starts with a GOTPLT header (which has size 16 bytes on elf64-riscv and 8 bytes on elf32-riscv), where the first word is set to -1. See the binutils implementation for riscv [1].

This causes the binfmt_flat loader to stop relocating GOT entries prematurely and thus causes the application to crash when running.

Fix this by skipping the whole GOTPLT header, since the whole GOTPLT header is reserved for the dynamic linker.

The GOTPLT header will only be skipped for bFLT binaries with flag FLAT_FLAG_GOTPIC set. This flag is unconditionally set by elf2flt if the supplied ELF binary has the symbol _GLOBAL_OFFSET_TABLE_ defined. ELF binaries without a .got input section should thus remain unaffected.

Tested on RISC-V Canaan Kendryte K210 and RISC-V QEMU nommu_virt_defconfig.

[1] https://sourceware.org/git/?p=binutils-gdb.git%3Ba=blob%3Bf=bfd/elfnn-riscv....

Cc: stable@vger.kernel.org Signed-off-by: Niklas Cassel niklas.cassel@wdc.com Reviewed-by: Damien Le Moal damien.lemoal@opensource.wdc.com Link: https://lore.kernel.org/r/20220414091018.896737-1-niklas.cassel@wdc.com Fixed-by: kernel test robot lkp@intel.com Link: https://lore.kernel.org/lkml/202204182333.OIUOotK8-lkp@intel.com Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/binfmt_flat.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)

--- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -408,6 +408,30 @@ static void old_reloc(unsigned long rl)

/****************************************************************************/

+static inline u32 __user *skip_got_header(u32 __user *rp) +{ + if (IS_ENABLED(CONFIG_RISCV)) { + /* + * RISC-V has a 16 byte GOT PLT header for elf64-riscv + * and 8 byte GOT PLT header for elf32-riscv. + * Skip the whole GOT PLT header, since it is reserved + * for the dynamic linker (ld.so). + */ + u32 rp_val0, rp_val1; + + if (get_user(rp_val0, rp)) + return rp; + if (get_user(rp_val1, rp + 1)) + return rp; + + if (rp_val0 == 0xffffffff && rp_val1 == 0xffffffff) + rp += 4; + else if (rp_val0 == 0xffffffff) + rp += 2; + } + return rp; +} + static int load_flat_file(struct linux_binprm *bprm, struct lib_info *libinfo, int id, unsigned long *extra_stack) { @@ -745,7 +769,8 @@ static int load_flat_file(struct linux_b * image. */ if (flags & FLAT_FLAG_GOTPIC) { - for (rp = (u32 __user *)datapos; ; rp++) { + rp = skip_got_header((u32 __user *) datapos); + for (; ; rp++) { u32 addr, rp_val; if (get_user(rp_val, rp)) return -EFAULT;

From: Carl Yin(殷张成) carl.yin@quectel.com

commit 33b7af2f459df453feb0d44628d820c47fefe7a8 upstream.

The BG95 modem has 3 USB configurations that are configurable via the AT command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem enumerate with the following interfaces, respectively:

"modem": Diag + GNSS + Modem + Modem "ecm" : Diag + GNSS + Modem + ECM "rmnet": Diag + GNSS + Modem + QMI Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE)

A detailed description of the USB configuration for each mode follows:

+QCFGEXT: "usbnet","modem" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+QCFGEXT: "usbnet","ecm" ------------------------ T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+QCFGEXT: "usbnet","rmnet" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Carl Yin carl.yin@quectel.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1137,6 +1137,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */ + .driver_info = RSVD(3) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

From: Eric W. Biederman ebiederm@xmission.com

commit 4a3d2717d140401df7501a95e454180831a0c5af upstream.

xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in user_enable_single_step and user_disable_single_step without locking could potentiallly cause problems.

So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP that xtensa already had defined but unused.

Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.

Cc: stable@vger.kernel.org Acked-by: Max Filippov jcmvbkbc@gmail.com Tested-by: Kees Cook keescook@chromium.org Reviewed-by: Oleg Nesterov oleg@redhat.com Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/xtensa/kernel/ptrace.c | 4 ++-- arch/xtensa/kernel/signal.c | 4 ++-- include/linux/ptrace.h | 6 ------ 3 files changed, 4 insertions(+), 10 deletions(-)

--- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -35,12 +35,12 @@

void user_enable_single_step(struct task_struct *child) { - child->ptrace |= PT_SINGLESTEP; + set_tsk_thread_flag(child, TIF_SINGLESTEP); }

void user_disable_single_step(struct task_struct *child) { - child->ptrace &= ~PT_SINGLESTEP; + clear_tsk_thread_flag(child, TIF_SINGLESTEP); }

/* --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -455,7 +455,7 @@ static void do_signal(struct pt_regs *re /* Set up the stack frame */ ret = setup_frame(&ksig, sigmask_to_save(), regs); signal_setup_done(ret, &ksig, 0); - if (current->ptrace & PT_SINGLESTEP) + if (test_thread_flag(TIF_SINGLESTEP)) task_pt_regs(current)->icountlevel = 1;

return; @@ -481,7 +481,7 @@ static void do_signal(struct pt_regs *re /* If there's no signal to deliver, we just restore the saved mask. */ restore_saved_sigmask();

- if (current->ptrace & PT_SINGLESTEP) + if (test_thread_flag(TIF_SINGLESTEP)) task_pt_regs(current)->icountlevel = 1; return; } --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -40,12 +40,6 @@ extern int ptrace_access_vm(struct task_ #define PT_EXITKILL (PTRACE_O_EXITKILL << PT_OPT_FLAG_SHIFT) #define PT_SUSPEND_SECCOMP (PTRACE_O_SUSPEND_SECCOMP << PT_OPT_FLAG_SHIFT)

-/* single stepping state bits (used on ARM and PA-RISC) */ -#define PT_SINGLESTEP_BIT 31 -#define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT) -#define PT_BLOCKSTEP_BIT 30 -#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT) - extern long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);

From: Qu Wenruo wqu@suse.com

commit d5321a0fa8bc49f11bea0b470800962c17d92d8f upstream.

The following error message lack the "0x" obviously:

cannot mount because of unsupported optional features (4000)

Add the prefix to make it less confusing. This can happen on older kernels that try to mount a filesystem with newer features so it makes sense to backport to older trees.

CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/disk-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2855,7 +2855,7 @@ int open_ctree(struct super_block *sb, ~BTRFS_FEATURE_INCOMPAT_SUPP; if (features) { btrfs_err(fs_info, - "cannot mount because of unsupported optional features (%llx)", + "cannot mount because of unsupported optional features (0x%llx)", features); err = -EINVAL; goto fail_alloc; @@ -2915,7 +2915,7 @@ int open_ctree(struct super_block *sb, ~BTRFS_FEATURE_COMPAT_RO_SUPP; if (!sb_rdonly(sb) && features) { btrfs_err(fs_info, - "cannot mount read-write because of unsupported optional features (%llx)", + "cannot mount read-write because of unsupported optional features (0x%llx)", features); err = -EINVAL; goto fail_alloc;

From: Liu Zixian liuzixian4@huawei.com

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218

KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

Signed-off-by: Liu Zixian liuzixian4@huawei.com Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 25503b933599..7511f416eb67 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -180,6 +180,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector) DRM_DEBUG("add mode: %dx%d\n", width, height); mode = drm_cvt_mode(connector->dev, width, height, 60, false, false, false); + if (!mode) + return count; mode->type |= DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, mode); count++;

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch: drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure() warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c index 995c7d0c212a..11ee5ee48976 100644 --- a/drivers/net/wireless/broadcom/b43legacy/phy.c +++ b/drivers/net/wireless/broadcom/b43legacy/phy.c @@ -1148,7 +1148,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev) struct b43legacy_phy *phy = &dev->phy; u16 regstack[12] = { 0 }; u16 mls; - u16 fval; + s16 fval; int i; int j;

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null before dereference

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c index 84205aa508df..daa4f9eb08ff 100644 --- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c +++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c @@ -397,7 +397,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)

/* Each fragment may need to have room for encryption * pre/postfix */ - if (host_encrypt) + if (host_encrypt && crypt && crypt->ops) bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + crypt->ops->extra_mpdu_postfix_len;

From: Daniel Vetter daniel.vetter@ffwll.ch

[ Upstream commit 43553559121ca90965b572cf8a1d6d0fd618b449 ]

This shouldn't be a problem in practice since until we've actually taken over the console there's nothing we've registered with the console/vt subsystem, so the exit/unbind path that check this can't do the wrong thing. But it's confusing, so fix it by moving it a tad later.

Acked-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Daniel Vetter daniel.vetter@intel.com Cc: Daniel Vetter daniel@ffwll.ch Cc: Du Cheng ducheng2@gmail.com Cc: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Cc: Claudio Suarez cssk@net-c.es Cc: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-dani... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/fbcon.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index bf7959fdf9f4..7c2582892eab 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -3314,6 +3314,9 @@ static void fbcon_register_existing_fbs(struct work_struct *work)

console_lock();

+ deferred_takeover = false; + logo_shown = FBCON_LOGO_DONTSHOW; + for_each_registered_fb(i) fbcon_fb_registered(registered_fb[i]);

@@ -3331,8 +3334,6 @@ static int fbcon_output_notifier(struct notifier_block *nb, pr_info("fbcon: Taking over console\n");

dummycon_unregister_output_notifier(&fbcon_output_nb); - deferred_takeover = false; - logo_shown = FBCON_LOGO_DONTSHOW;

/* We may get called in atomic context */ schedule_work(&fbcon_deferred_takeover_work);

From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com

[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]

It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/sound/jack.h | 1 + sound/core/jack.c | 34 +++++++++++++++++++++++++++------- 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/sound/jack.h b/include/sound/jack.h index 1e84bfb553cf..4742f842b457 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -77,6 +77,7 @@ struct snd_jack { const char *id; #ifdef CONFIG_SND_JACK_INPUT_DEV struct input_dev *input_dev; + struct mutex input_dev_lock; int registered; int type; char name[100]; diff --git a/sound/core/jack.c b/sound/core/jack.c index acb531749efb..074b15fcb0ac 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -48,8 +48,11 @@ static int snd_jack_dev_disconnect(struct snd_device *device) #ifdef CONFIG_SND_JACK_INPUT_DEV struct snd_jack *jack = device->device_data;

- if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return 0; + }

/* If the input device is registered with the input subsystem * then we need to use a different deallocator. */ @@ -58,6 +61,7 @@ static int snd_jack_dev_disconnect(struct snd_device *device) else input_free_device(jack->input_dev); jack->input_dev = NULL; + mutex_unlock(&jack->input_dev_lock); #endif /* CONFIG_SND_JACK_INPUT_DEV */ return 0; } @@ -96,8 +100,11 @@ static int snd_jack_dev_register(struct snd_device *device) snprintf(jack->name, sizeof(jack->name), "%s %s", card->shortname, jack->id);

- if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return 0; + }

jack->input_dev->name = jack->name;

@@ -122,6 +129,7 @@ static int snd_jack_dev_register(struct snd_device *device) if (err == 0) jack->registered = 1;

+ mutex_unlock(&jack->input_dev_lock); return err; } #endif /* CONFIG_SND_JACK_INPUT_DEV */ @@ -242,9 +250,11 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, return -ENOMEM; }

- /* don't creat input device for phantom jack */ - if (!phantom_jack) { #ifdef CONFIG_SND_JACK_INPUT_DEV + mutex_init(&jack->input_dev_lock); + + /* don't create input device for phantom jack */ + if (!phantom_jack) { int i;

jack->input_dev = input_allocate_device(); @@ -262,8 +272,8 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, input_set_capability(jack->input_dev, EV_SW, jack_switch_types[i]);

-#endif /* CONFIG_SND_JACK_INPUT_DEV */ } +#endif /* CONFIG_SND_JACK_INPUT_DEV */

err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops); if (err < 0) @@ -303,10 +313,14 @@ EXPORT_SYMBOL(snd_jack_new); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent) { WARN_ON(jack->registered); - if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return; + }

jack->input_dev->dev.parent = parent; + mutex_unlock(&jack->input_dev_lock); } EXPORT_SYMBOL(snd_jack_set_parent);

@@ -354,6 +368,8 @@ EXPORT_SYMBOL(snd_jack_set_key);

/** * snd_jack_report - Report the current status of a jack + * Note: This function uses mutexes and should be called from a + * context which can sleep (such as a workqueue). * * @jack: The jack to report status for * @status: The current status of the jack @@ -373,8 +389,11 @@ void snd_jack_report(struct snd_jack *jack, int status) status & jack_kctl->mask_bits);

#ifdef CONFIG_SND_JACK_INPUT_DEV - if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return; + }

for (i = 0; i < ARRAY_SIZE(jack->key); i++) { int testbit = SND_JACK_BTN_0 >> i; @@ -393,6 +412,7 @@ void snd_jack_report(struct snd_jack *jack, int status) }

input_sync(jack->input_dev); + mutex_unlock(&jack->input_dev_lock); #endif /* CONFIG_SND_JACK_INPUT_DEV */ } EXPORT_SYMBOL(snd_jack_report);

From: Thibaut VARÈNE hacks+kernel@slashdirt.org

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]: "The value written to that register is wrong, because while the mask definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE hacks+kernel@slashdirt.org Acked-by: Felix Fietkau nbd@nbd.name Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index a171dbb29fbb..ad949eb02f3d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -720,7 +720,7 @@ #define AR_CH0_TOP2 (AR_SREV_9300(ah) ? 0x1628c : \ (AR_SREV_9462(ah) ? 0x16290 : 0x16284)) #define AR_CH0_TOP2_XPABIASLVL (AR_SREV_9561(ah) ? 0x1e00 : 0xf000) -#define AR_CH0_TOP2_XPABIASLVL_S 12 +#define AR_CH0_TOP2_XPABIASLVL_S (AR_SREV_9561(ah) ? 9 : 12)

#define AR_CH0_XTAL (AR_SREV_9300(ah) ? 0x16294 : \ ((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get the following splat:

[ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cx23885/cx23885-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c index a1d738969d7b..06e4e1df125c 100644 --- a/drivers/media/pci/cx23885/cx23885-core.c +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -2164,7 +2164,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, err = pci_set_dma_mask(pci_dev, 0xffffffff); if (err) { pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); - goto fail_ctrl; + goto fail_dma_set_mask; }

err = request_irq(pci_dev->irq, cx23885_irq, @@ -2172,7 +2172,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, if (err < 0) { pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq); - goto fail_irq; + goto fail_dma_set_mask; }

switch (dev->board) { @@ -2194,7 +2194,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,

return 0;

-fail_irq: +fail_dma_set_mask: cx23885_dev_unregister(dev); fail_ctrl: v4l2_ctrl_handler_free(hdl);

From: Heming Zhao heming.zhao@suse.com

[ Upstream commit e68cb83a57a458b01c9739e2ad9cb70b04d1e6d2 ]

If bitmap area contains invalid data, kernel will crash then mdadm triggers "Segmentation fault". This is cluster-md speical bug. In non-clustered env, mdadm will handle broken metadata case. In clustered array, only kernel space handles bitmap slot info. But even this bug only happened in clustered env, current sanity check is wrong, the code should be changed.

How to trigger: (faulty injection)

dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm -Ss echo aaa > magic.txt == below modifying slot 2 bitmap data == dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize mdadm -A /dev/md0 /dev/sda /dev/sdb == kernel crashes. mdadm outputs "Segmentation fault" ==

Reason of kernel crash:

In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T() trigger "divide error".

Crash log:

kernel: md: md0 stopped. kernel: md/raid1:md0: not clean -- starting background reconstruction kernel: md/raid1:md0: active with 2 out of 2 mirrors kernel: dlm: ... ... kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1 kernel: md0: invalid bitmap file superblock: bad magic kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2 kernel: md-cluster: Could not gather bitmaps from slot 2 kernel: divide error: 0000 [#1] SMP NOPTI kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246 kernel: ... ... kernel: Call Trace: kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0] kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a] kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0] kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a] kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a] kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a] kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a] kernel: ? blkdev_ioctl+0xb1/0x2b0 kernel: block_ioctl+0x3b/0x40 kernel: __x64_sys_ioctl+0x7f/0xb0 kernel: do_syscall_64+0x59/0x80 kernel: ? exit_to_user_mode_prepare+0x1ab/0x230 kernel: ? syscall_exit_to_user_mode+0x18/0x40 kernel: ? do_syscall_64+0x69/0x80 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f4a15fa722b kernel: ... ... kernel: ---[ end trace 8afa7612f559c868 ]--- kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Guoqing Jiang guoqing.jiang@linux.dev Signed-off-by: Heming Zhao heming.zhao@suse.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/md-bitmap.c | 44 ++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c index e79d2aa2372f..7cf9d34ce20e 100644 --- a/drivers/md/md-bitmap.c +++ b/drivers/md/md-bitmap.c @@ -641,14 +641,6 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) daemon_sleep = le32_to_cpu(sb->daemon_sleep) * HZ; write_behind = le32_to_cpu(sb->write_behind); sectors_reserved = le32_to_cpu(sb->sectors_reserved); - /* Setup nodes/clustername only if bitmap version is - * cluster-compatible - */ - if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) { - nodes = le32_to_cpu(sb->nodes); - strlcpy(bitmap->mddev->bitmap_info.cluster_name, - sb->cluster_name, 64); - }

/* verify that the bitmap-specific fields are valid */ if (sb->magic != cpu_to_le32(BITMAP_MAGIC)) @@ -670,6 +662,16 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) goto out; }

+ /* + * Setup nodes/clustername only if bitmap version is + * cluster-compatible + */ + if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) { + nodes = le32_to_cpu(sb->nodes); + strlcpy(bitmap->mddev->bitmap_info.cluster_name, + sb->cluster_name, 64); + } + /* keep the array size field of the bitmap superblock up to date */ sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);

@@ -702,9 +704,9 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)

out: kunmap_atomic(sb); - /* Assigning chunksize is required for "re_read" */ - bitmap->mddev->bitmap_info.chunksize = chunksize; if (err == 0 && nodes && (bitmap->cluster_slot < 0)) { + /* Assigning chunksize is required for "re_read" */ + bitmap->mddev->bitmap_info.chunksize = chunksize; err = md_setup_cluster(bitmap->mddev, nodes); if (err) { pr_warn("%s: Could not setup cluster service (%d)\n", @@ -715,18 +717,18 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) goto re_read; }

- out_no_sb: - if (test_bit(BITMAP_STALE, &bitmap->flags)) - bitmap->events_cleared = bitmap->mddev->events; - bitmap->mddev->bitmap_info.chunksize = chunksize; - bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep; - bitmap->mddev->bitmap_info.max_write_behind = write_behind; - bitmap->mddev->bitmap_info.nodes = nodes; - if (bitmap->mddev->bitmap_info.space == 0 || - bitmap->mddev->bitmap_info.space > sectors_reserved) - bitmap->mddev->bitmap_info.space = sectors_reserved; - if (err) { + if (err == 0) { + if (test_bit(BITMAP_STALE, &bitmap->flags)) + bitmap->events_cleared = bitmap->mddev->events; + bitmap->mddev->bitmap_info.chunksize = chunksize; + bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep; + bitmap->mddev->bitmap_info.max_write_behind = write_behind; + bitmap->mddev->bitmap_info.nodes = nodes; + if (bitmap->mddev->bitmap_info.space == 0 || + bitmap->mddev->bitmap_info.space > sectors_reserved) + bitmap->mddev->bitmap_info.space = sectors_reserved; + } else { md_bitmap_print_sb(bitmap); if (bitmap->cluster_slot < 0) md_cluster_stop(bitmap->mddev);

From: Steven Price steven.price@arm.com

[ Upstream commit 4b674dd69701c2e22e8e7770c1706a69f3b17269 ]

While the check for format_count > 64 in __drm_universal_plane_init() shouldn't be hit (it's a WARN_ON), in its current position it will then leak the plane->format_types array and fail to call drm_mode_object_unregister() leaking the modeset identifier. Move it to the start of the function to avoid allocating those resources in the first place.

Signed-off-by: Steven Price steven.price@arm.com Signed-off-by: Liviu Dudau liviu.dudau@arm.com Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.co... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_plane.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c index 2411b6de055e..425e76e39b3b 100644 --- a/drivers/gpu/drm/drm_plane.c +++ b/drivers/gpu/drm/drm_plane.c @@ -177,6 +177,13 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, if (WARN_ON(config->num_total_plane >= 32)) return -EINVAL;

+ /* + * First driver to need more than 64 formats needs to fix this. Each + * format is encoded as a bit and the current code only supports a u64. + */ + if (WARN_ON(format_count > 64)) + return -EINVAL; + WARN_ON(drm_drv_uses_atomic_modeset(dev) && (!funcs->atomic_destroy_state || !funcs->atomic_duplicate_state)); @@ -198,13 +205,6 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, return -ENOMEM; }

- /* - * First driver to need more than 64 formats needs to fix this. Each - * format is encoded as a bit and the current code only supports a u64. - */ - if (WARN_ON(format_count > 64)) - return -EINVAL; - if (format_modifiers) { const uint64_t *temp_modifiers = format_modifiers; while (*temp_modifiers++ != DRM_FORMAT_MOD_INVALID)

From: jianghaoran jianghaoran@kylinos.cn

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets and will generate TX errors

ex: ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2 ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1480 inet x.x.x.x netmask 255.255.255.255 destination x.x.x.x inet6 fe80::5efe:ac1e:3cdb prefixlen 64 scopeid 0x20<link> tunnel txqueuelen 1000 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 3 dropped 0 overruns 0 carrier 0 collisions 0

Signed-off-by: jianghaoran jianghaoran@kylinos.cn Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/addrconf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index a8db1efccbf5..f261c6d7f1f2 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4143,7 +4143,8 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id, send_rs = send_mld && ipv6_accept_ra(ifp->idev) && ifp->idev->cnf.rtr_solicits != 0 && - (dev->flags&IFF_LOOPBACK) == 0; + (dev->flags & IFF_LOOPBACK) == 0 && + (dev->type != ARPHRD_TUNNEL); read_unlock_bh(&ifp->idev->lock);

/* While dad is in progress mld report's source address is in6_addrany.

From: Petr Machata petrm@nvidia.com

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns the first matching entry, not all of them, and the warning will then claim that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the following commands:

# dcb app flush dev swp19 dscp-prio # dcb app add dev swp19 dscp-prio 24:3 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new value, and then removing all old values. This is the only way to make the replacement without causing the traffic to be prioritized to whatever the chip defaults to. The warning is issued in response to adding the new priority, and then no warning is shown when the old priority is removed. The upshot is that the canonical way to change traffic prioritization always produces a warning about ignoring the new priority, but what gets configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk maksymy@nvidia.com Signed-off-by: Petr Machata petrm@nvidia.com Signed-off-by: Ido Schimmel idosch@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 13 ------------- 1 file changed, 13 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 21296fa7f7fb..bf51ed94952c 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -227,8 +227,6 @@ static int mlxsw_sp_dcbnl_ieee_setets(struct net_device *dev, static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev, struct dcb_app *app) { - int prio; - if (app->priority >= IEEE_8021QAZ_MAX_TCS) { netdev_err(dev, "APP entry with priority value %u is invalid\n", app->priority); @@ -242,17 +240,6 @@ static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev, app->protocol); return -EINVAL; } - - /* Warn about any DSCP APP entries with the same PID. */ - prio = fls(dcb_ieee_getapp_mask(dev, app)); - if (prio--) { - if (prio < app->priority) - netdev_warn(dev, "Choosing priority %d for DSCP %d in favor of previously-active value of %d\n", - app->priority, app->protocol, prio); - else if (prio > app->priority) - netdev_warn(dev, "Ignoring new priority %d for DSCP %d in favor of current value of %d\n", - app->priority, app->protocol, prio); - } break;

case IEEE_8021QAZ_APP_SEL_ETHERTYPE:

From: Heiko Carstens hca@linux.ibm.com

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated if parameters are constant and within in a certain range. This depends on various obscure kernel config options, however in particular PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’, inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3: ./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’ 80 | asm volatile( \ | ^~~

Workaround this by simply disabling the optimization for PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this optimization won't matter at all.

Reported-by: Thomas Richter tmricht@linux.ibm.com Reviewed-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/include/asm/preempt.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h index 23a14d187fb1..1aebf09fbcd8 100644 --- a/arch/s390/include/asm/preempt.h +++ b/arch/s390/include/asm/preempt.h @@ -50,10 +50,17 @@ static inline bool test_preempt_need_resched(void)

static inline void __preempt_count_add(int val) { - if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) - __atomic_add_const(val, &S390_lowcore.preempt_count); - else - __atomic_add(val, &S390_lowcore.preempt_count); + /* + * With some obscure config options and CONFIG_PROFILE_ALL_BRANCHES + * enabled, gcc 12 fails to handle __builtin_constant_p(). + */ + if (!IS_ENABLED(CONFIG_PROFILE_ALL_BRANCHES)) { + if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) { + __atomic_add_const(val, &S390_lowcore.preempt_count); + return; + } + } + __atomic_add(val, &S390_lowcore.preempt_count); }

static inline void __preempt_count_sub(int val)

From: Corey Minyard cminyard@mvista.com

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and SSIF_GETTING_EVENTS states without a valid message in the msg field, it's probably best to be defensive here and check and print a log, since that means something else went wrong.

Also add a default clause to that switch statement to release the lock and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Corey Minyard cminyard@mvista.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/ipmi/ipmi_ssif.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index fec679433f72..fd1a487443f0 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -801,6 +801,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_EVENTS: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting events\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -824,6 +832,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_MESSAGES: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting messages\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -846,6 +862,13 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, deliver_recv_msg(ssif_info, msg); } break; + + default: + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "Invalid state in message done handling: %d\n", + ssif_info->ssif_state); + ipmi_ssif_unlock_cond(ssif_info, flags); }

flags = ipmi_ssif_lock_cond(ssif_info, &oflags);

From: Hans Verkuil hverkuil-cisco@xs4all.nl

[ Upstream commit 59267fc34f4900dcd2ec3295f6be04b79aee2186 ]

If an adapter is trying to claim a free logical address then it is in the 'is_configuring' state. If during that process the cable is disconnected (HPD goes low, which in turn invalidates the physical address), then cec_adap_unconfigure() is called, and that set the is_configuring boolean to false, even though the thread that's trying to claim an LA is still running.

Don't touch the is_configuring bool in cec_adap_unconfigure(), it will eventually be cleared by the thread. By making that change the cec_config_log_addr() function also had to change: it was aborting if is_configuring became false (since that is what cec_adap_unconfigure() did), but that no longer works. Instead check if the physical address is invalid. That is a much more appropriate check anyway.

This fixes a bug where the the adapter could be disabled even though the device was still configuring. This could cause POLL transmits to time out.

Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/cec/cec-adap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 5eeadab15a5f..a42043379d67 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1218,7 +1218,7 @@ static int cec_config_log_addr(struct cec_adapter *adap, * While trying to poll the physical address was reset * and the adapter was unconfigured, so bail out. */ - if (!adap->is_configuring) + if (adap->phys_addr == CEC_PHYS_ADDR_INVALID) return -EINTR;

if (err) @@ -1276,7 +1276,6 @@ static void cec_adap_unconfigure(struct cec_adapter *adap) adap->phys_addr != CEC_PHYS_ADDR_INVALID) WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID)); adap->log_addrs.log_addr_mask = 0; - adap->is_configuring = false; adap->is_configured = false; memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs)); cec_flush(adap); @@ -1469,9 +1468,10 @@ static int cec_config_thread_func(void *arg) for (i = 0; i < las->num_log_addrs; i++) las->log_addr[i] = CEC_LOG_ADDR_INVALID; cec_adap_unconfigure(adap); + adap->is_configuring = false; adap->kthread_config = NULL; - mutex_unlock(&adap->lock); complete(&adap->config_completion); + mutex_unlock(&adap->lock); return 0; }

From: Smith, Kyle Miller (Nimble Kernel) kyles@hpe.com

[ Upstream commit da42761181627e9bdc37d18368b827948a583929 ]

In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]).

Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference.

Signed-off-by: Kyle Smith kyles@hpe.com Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index d7cf3202cdd3..b06d2b6bd3fe 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1522,6 +1522,7 @@ static int nvme_alloc_admin_tags(struct nvme_dev *dev) dev->ctrl.admin_q = blk_mq_init_queue(&dev->admin_tagset); if (IS_ERR(dev->ctrl.admin_q)) { blk_mq_free_tag_set(&dev->admin_tagset); + dev->ctrl.admin_q = NULL; return -ENOMEM; } if (!blk_get_queue(dev->ctrl.admin_q)) {

From: Fabio Estevam festevam@denx.de

[ Upstream commit f2ef6f7539c68c6bd6c32323d8845ee102b7c450 ]

Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens.

Allow passing .probe without .driver_data by inserting NULL checks for priv->type.

Signed-off-by: Fabio Estevam festevam@denx.de Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/micrel.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 013590330059..1d00a563892a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -285,7 +285,7 @@ static int kszphy_config_reset(struct phy_device *phydev) } }

- if (priv->led_mode >= 0) + if (priv->type && priv->led_mode >= 0) kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);

return 0; @@ -301,10 +301,10 @@ static int kszphy_config_init(struct phy_device *phydev)

type = priv->type;

- if (type->has_broadcast_disable) + if (type && type->has_broadcast_disable) kszphy_broadcast_disable(phydev);

- if (type->has_nand_tree_disable) + if (type && type->has_nand_tree_disable) kszphy_nand_tree_disable(phydev);

return kszphy_config_reset(phydev); @@ -775,7 +775,7 @@ static int kszphy_probe(struct phy_device *phydev)

priv->type = type;

- if (type->led_mode_reg) { + if (type && type->led_mode_reg) { ret = of_property_read_u32(np, "micrel,led-mode", &priv->led_mode); if (ret) @@ -796,7 +796,8 @@ static int kszphy_probe(struct phy_device *phydev) unsigned long rate = clk_get_rate(clk); bool rmii_ref_clk_sel_25_mhz;

- priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel; + if (type) + priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel; rmii_ref_clk_sel_25_mhz = of_property_read_bool(np, "micrel,rmii-reference-clock-select-25-mhz");

From: Guenter Roeck linux@roeck-us.net

[ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ]

Various attempts were made recently to "convert" the old hwmon_device_register() API to devm_hwmon_device_register_with_info() by just changing the function name without actually converting the driver. Prevent this from happening by making the 'chip' parameter of devm_hwmon_device_register_with_info() mandatory.

Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/hwmon/hwmon-kernel-api.txt | 2 +- drivers/hwmon/hwmon.c | 16 +++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index eb7a78aebb38..4981df157b04 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -71,7 +71,7 @@ hwmon_device_register_with_info is the most comprehensive and preferred means to register a hardware monitoring device. It creates the standard sysfs attributes in the hardware monitoring core, letting the driver focus on reading from and writing to the chip instead of having to bother with sysfs attributes. -The parent device parameter cannot be NULL with non-NULL chip info. Its +The parent device parameter as well as the chip parameter must not be NULL. Its parameters are described in more detail below.

devm_hwmon_device_register_with_info is similar to diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c4051a3e63c2..fb82d8ee0dd6 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -695,11 +695,12 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);

/** * hwmon_device_register_with_info - register w/ hwmon - * @dev: the parent device - * @name: hwmon name attribute - * @drvdata: driver data to attach to created device - * @chip: pointer to hwmon chip information + * @dev: the parent device (mandatory) + * @name: hwmon name attribute (mandatory) + * @drvdata: driver data to attach to created device (optional) + * @chip: pointer to hwmon chip information (mandatory) * @extra_groups: pointer to list of additional non-standard attribute groups + * (optional) * * hwmon_device_unregister() must be called when the device is no * longer needed. @@ -712,13 +713,10 @@ hwmon_device_register_with_info(struct device *dev, const char *name, const struct hwmon_chip_info *chip, const struct attribute_group **extra_groups) { - if (!name) - return ERR_PTR(-EINVAL); - - if (chip && (!chip->ops || !chip->ops->is_visible || !chip->info)) + if (!dev || !name || !chip) return ERR_PTR(-EINVAL);

- if (chip && !dev) + if (!chip->ops || !chip->ops->is_visible || !chip->info) return ERR_PTR(-EINVAL);

return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);

From: Jakub Kicinski kuba@kernel.org

[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]

GCC 12 currently generates a rather inconsistent warning:

drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds] 17795 | struct tg3_napi *tnapi = &tp->napi[i]; | ~~~~~~~~^~~

i is guaranteed < tp->irq_max which in turn is either 1 or 5. There are more loops like this one in the driver, but strangely GCC 12 dislikes only this single one.

Silence this silliness for now.

Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/Makefile | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile index 7046ad6d3d0e..ac50da49ca77 100644 --- a/drivers/net/ethernet/broadcom/Makefile +++ b/drivers/net/ethernet/broadcom/Makefile @@ -16,3 +16,8 @@ obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o obj-$(CONFIG_BNXT) += bnxt/ + +# FIXME: temporarily silence -Warray-bounds on non W=1+ builds +ifndef KBUILD_EXTRA_WARN +CFLAGS_tg3.o += -Wno-array-bounds +endif

From: Brian Norris briannorris@chromium.org

[ Upstream commit 2fccf9e6050e0e3b8b4cd275d41daf7f7fa22804 ]

Otherwise we hit an unablanced enable-count when unbinding the DFI device:

[ 1279.659119] ------------[ cut here ]------------ [ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c ... [ 1279.659352] Hardware name: Google Kevin (DT) [ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c [ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28 ... [ 1279.659571] Call trace: [ 1279.659582] devfreq_event_remove_edev+0x84/0x8c [ 1279.659590] devm_devfreq_event_release+0x1c/0x28 [ 1279.659602] release_nodes+0x1cc/0x244 [ 1279.659611] devres_release_all+0x44/0x60 [ 1279.659621] device_release_driver_internal+0x11c/0x1ac [ 1279.659629] device_driver_detach+0x20/0x2c [ 1279.659641] unbind_store+0x7c/0xb0 [ 1279.659650] drv_attr_store+0x2c/0x40 [ 1279.659663] sysfs_kf_write+0x44/0x58 [ 1279.659672] kernfs_fop_write_iter+0xf4/0x190 [ 1279.659684] vfs_write+0x2b0/0x2e4 [ 1279.659693] ksys_write+0x80/0xec [ 1279.659701] __arm64_sys_write+0x24/0x30 [ 1279.659714] el0_svc_common+0xf0/0x1d8 [ 1279.659724] do_el0_svc_compat+0x28/0x3c [ 1279.659738] el0_svc_compat+0x10/0x1c [ 1279.659746] el0_sync_compat_handler+0xa8/0xcc [ 1279.659758] el0_sync_compat+0x188/0x1c0 [ 1279.659768] ---[ end trace cec200e5094155b4 ]---

Signed-off-by: Brian Norris briannorris@chromium.org Signed-off-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/devfreq/rk3399_dmc.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c index e795ad2b3f6b..eefda6edc89c 100644 --- a/drivers/devfreq/rk3399_dmc.c +++ b/drivers/devfreq/rk3399_dmc.c @@ -411,6 +411,8 @@ static int rk3399_dmcfreq_remove(struct platform_device *pdev) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev);

+ devfreq_event_disable_edev(dmcfreq->edev); + /* * Before remove the opp table we need to unregister the opp notifier. */

From: Janusz Krzysztofik jmkrzyszt@gmail.com

[ Upstream commit 338d5d476cde853dfd97378d20496baabc2ce3c0 ]

Since its introduction to the mainline kernel, omap1_uart_recalc() helper makes incorrect use of clk->enable_bit as a ready to use bitmap mask while it only provides the bit number. Fix it.

Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap1/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fa512413a471..b277409f303a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(clockfw_lock); unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); - return val & clk->enable_bit ? 48000000 : 12000000; + return val & 1 << clk->enable_bit ? 48000000 : 12000000; }

unsigned long omap1_sossi_recalc(struct clk *clk)

From: Peng Wu wupeng58@huawei.com

[ Upstream commit 23b44f9c649bbef10b45fa33080cd8b4166800ae ]

The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.

Signed-off-by: Peng Wu wupeng58@huawei.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20220428230356.69418-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-vexpress/dcscb.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index ee2a0faafaa1..aaade91f6551 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -146,6 +146,7 @@ static int __init dcscb_init(void) if (!node) return -ENODEV; dcscb_base = of_iomap(node, 0); + of_node_put(node); if (!dcscb_base) return -EADDRNOTAVAIL; cfg = readl_relaxed(dcscb_base + DCS_CFG_R);

From: Peng Wu wupeng58@huawei.com

[ Upstream commit 9bc72e47d4630d58a840a66a869c56b29554cfe4 ]

of_find_compatible_node will increment the refcount of the returned device_node. Calling of_node_put() to avoid the refcount leak

Signed-off-by: Peng Wu wupeng58@huawei.com Signed-off-by: Wei Xu xuwei5@hisilicon.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-hisi/platsmp.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index da5689ababf7..d7fbfb6d293d 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -70,14 +70,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) } ctrl_base = of_iomap(np, 0); if (!ctrl_base) { + of_node_put(np); pr_err("failed to map address\n"); return; } if (of_property_read_u32(np, "smp-offset", &offset) < 0) { + of_node_put(np); pr_err("failed to find smp-offset property\n"); return; } ctrl_base += offset; + of_node_put(np); } }

@@ -163,6 +166,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) if (WARN_ON(!node)) return -1; ctrl_base = of_iomap(node, 0); + of_node_put(node);

/* set the secondary core boot from DDR */ remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);

From: Vasily Averin vvs@openvz.org

[ Upstream commit 2b132903de7124dd9a758be0c27562e91a510848 ]

Fixes following sparse warnings:

CHECK mm/vmscan.c mm/vmscan.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/vmscan.h): ./include/trace/events/vmscan.h:281:1: sparse: warning: cast to restricted isolate_mode_t ./include/trace/events/vmscan.h:281:1: sparse: warning: restricted isolate_mode_t degrades to integer

Link: https://lkml.kernel.org/r/e85d7ff2-fd10-53f8-c24e-ba0458439c1b@openvz.org Signed-off-by: Vasily Averin vvs@openvz.org Acked-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/trace/events/vmscan.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h index a1cb91342231..7add8c87fe22 100644 --- a/include/trace/events/vmscan.h +++ b/include/trace/events/vmscan.h @@ -294,7 +294,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate, __field(unsigned long, nr_scanned) __field(unsigned long, nr_skipped) __field(unsigned long, nr_taken) - __field(isolate_mode_t, isolate_mode) + __field(unsigned int, isolate_mode) __field(int, lru) ),

@@ -305,7 +305,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate, __entry->nr_scanned = nr_scanned; __entry->nr_skipped = nr_skipped; __entry->nr_taken = nr_taken; - __entry->isolate_mode = isolate_mode; + __entry->isolate_mode = (__force unsigned int)isolate_mode; __entry->lru = lru; ),

From: Finn Thain fthain@linux-m68k.org

[ Upstream commit 86ce436e30d86327c9f5260f718104ae7b21f506 ]

drivers/macintosh/via-pmu-event.o: In function `via_pmu_event': via-pmu-event.c:(.text+0x44): undefined reference to `input_event' via-pmu-event.c:(.text+0x68): undefined reference to `input_event' via-pmu-event.c:(.text+0x94): undefined reference to `input_event' via-pmu-event.c:(.text+0xb8): undefined reference to `input_event' drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init': via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device' via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device' via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device' make[1]: *** [Makefile:1155: vmlinux] Error 1 make: *** [Makefile:350: __build_one_by_one] Error 2

Don't call into the input subsystem unless CONFIG_INPUT is built-in.

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Finn Thain fthain@linux-m68k.org Tested-by: Randy Dunlap rdunlap@infradead.org Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Acked-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.164932629... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/macintosh/Kconfig | 4 ++++ drivers/macintosh/Makefile | 3 ++- drivers/macintosh/via-pmu.c | 2 +- 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 47c350cdfb12..a316624742f6 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -66,6 +66,10 @@ config ADB_PMU this device; you should do so if your machine is one of those mentioned above.

+config ADB_PMU_EVENT + def_bool y + depends on ADB_PMU && INPUT=y + config ADB_PMU_LED bool "Support for the Power/iBook front LED" depends on PPC_PMAC && ADB_PMU diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 49819b1b6f20..712edcb3e0b0 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -12,7 +12,8 @@ obj-$(CONFIG_MAC_EMUMOUSEBTN) += mac_hid.o obj-$(CONFIG_INPUT_ADBHID) += adbhid.o obj-$(CONFIG_ANSLCD) += ans-lcd.o

-obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o +obj-$(CONFIG_ADB_PMU) += via-pmu.o +obj-$(CONFIG_ADB_PMU_EVENT) += via-pmu-event.o obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o obj-$(CONFIG_ADB_CUDA) += via-cuda.o diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index d72c450aebe5..50299d68ddfc 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -1464,7 +1464,7 @@ pmu_handle_data(unsigned char *data, int len) pmu_pass_intr(data, len); /* len == 6 is probably a bad check. But how do I * know what PMU versions send what events here? */ - if (len == 6) { + if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) { via_pmu_event(PMU_EVT_POWER, !!(data[1]&8)); via_pmu_event(PMU_EVT_LID, data[1]&1); }

From: Linus Torvalds torvalds@linux-foundation.org

[ Upstream commit 47f15561b69e226bfc034e94ff6dbec51a4662af ]

When building the kernel for arm with the "-mabi=apcs-gnu" option, gcc will force alignment of all structures and unions to a word boundary (see also STRUCTURE_SIZE_BOUNDARY and the "-mstructure-size-boundary=XX" option if you're a gcc person), even when the members of said structures do not want or need said alignment.

This completely messes up the structure alignment of 'struct edid' on those targets, because even though all the embedded structures are marked with "__attribute__((packed))", the unions that contain them are not.

This was exposed by commit f1e4c916f97f ("drm/edid: add EDID block count and size helpers"), but the bug is pre-existing. That commit just made the structure layout problem cause a build failure due to the addition of the

BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH);

sanity check in drivers/gpu/drm/drm_edid.c:edid_block_data().

This legacy union alignment should probably not be used in the first place, but we can fix the layout by adding the packed attribute to the union entries even when each member is already packed and it shouldn't matter in a sane build environment.

You can see this issue with a trivial test program:

union { struct { char c[5]; }; struct { char d; unsigned e; } __attribute__((packed)); } a = { "1234" };

where building this with a normal "gcc -S" will result in the expected 5-byte size of said union:

.type a, @object .size a, 5

but with an ARM compiler and the old ABI:

arm-linux-gnu-gcc -mabi=apcs-gnu -mfloat-abi=soft -S t.c

you get

.type a, %object .size a, 8

instead, because even though each member of the union is packed, the union itself still gets aligned.

This was reported by Sudip for the spear3xx_defconfig target.

Link: https://lore.kernel.org/lkml/YpCUzStDnSgQLNFN@debian/ Reported-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Acked-by: Arnd Bergmann arnd@arndb.de Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Maxime Ripard mripard@kernel.org Cc: Thomas Zimmermann tzimmermann@suse.de Cc: David Airlie airlied@linux.ie Cc: Daniel Vetter daniel@ffwll.ch Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/drm/drm_edid.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 53be104aab5c..8b9678bffe7b 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -115,7 +115,7 @@ struct detailed_data_monitor_range { u8 supported_scalings; u8 preferred_refresh; } __attribute__((packed)) cvt; - } formula; + } __attribute__((packed)) formula; } __attribute__((packed));

struct detailed_data_wpindex { @@ -148,7 +148,7 @@ struct detailed_non_pixel { struct detailed_data_wpindex color; struct std_timing timings[6]; struct cvt_timing cvt[4]; - } data; + } __attribute__((packed)) data; } __attribute__((packed));

#define EDID_DETAIL_EST_TIMINGS 0xf7 @@ -166,7 +166,7 @@ struct detailed_timing { union { struct detailed_pixel_timing pixel_data; struct detailed_non_pixel other_data; - } data; + } __attribute__((packed)) data; } __attribute__((packed));

#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)

From: Jani Nikula jani.nikula@intel.com

[ Upstream commit 3aefc722ff52076407203b6af9713de567993adf ]

The invalid EDID block filtering uses the number of valid EDID extensions instead of all EDID extensions for looping the extensions in the copy. This is fine, by coincidence, if all the invalid blocks are at the end of the EDID. However, it's completely broken if there are invalid extensions in the middle; the invalid blocks are included and valid blocks are excluded.

Fix it by modifying the base block after, not before, the copy.

Fixes: 14544d0937bf ("drm/edid: Only print the bad edid when aborting") Reported-by: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Jani Nikula jani.nikula@intel.com Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20220330170426.349248-1-jani.n... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_edid.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ef26095719c5..28ea3d260bea 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1709,9 +1709,6 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,

connector_bad_edid(connector, edid, edid[0x7e] + 1);

- edid[EDID_LENGTH-1] += edid[0x7e] - valid_extensions; - edid[0x7e] = valid_extensions; - new = kmalloc_array(valid_extensions + 1, EDID_LENGTH, GFP_KERNEL); if (!new) @@ -1728,6 +1725,9 @@ struct edid *drm_do_get_edid(struct drm_connector *connector, base += EDID_LENGTH; }

+ new[EDID_LENGTH - 1] += new[0x7e] - valid_extensions; + new[0x7e] = valid_extensions; + kfree(edid); edid = new; }

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 4f4e0454e226de3bf4efd7e7924d1edc571c52d5 ]

Call of_node_put(platform_node) to avoid refcount leak in the error path.

Fixes: 94319ba10eca ("ASoC: mediatek: Use platform_of_node for machine drivers") Fixes: 493433785df0 ("ASoC: mediatek: mt8173: fix device_node leak") Signed-off-by: Miaoqian Lin linmq006@gmail.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20220404092903.26725-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mediatek/mt8173/mt8173-max98090.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c index 431ba3db1759..c9fc719c2af9 100644 --- a/sound/soc/mediatek/mt8173/mt8173-max98090.c +++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c @@ -156,7 +156,8 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev) if (!codec_node) { dev_err(&pdev->dev, "Property 'audio-codec' missing or invalid\n"); - return -EINVAL; + ret = -EINVAL; + goto put_platform_node; } for (i = 0; i < card->num_links; i++) { if (mt8173_max98090_dais[i].codec_name) @@ -171,6 +172,8 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev) __func__, ret);

of_node_put(codec_node); + +put_platform_node: of_node_put(platform_node); return ret; }

From: Ammar Faizi ammarfaizi2@gnuweeb.org

[ Upstream commit b86eb74098a92afd789da02699b4b0dd3f73b889 ]

The asm constraint does not reflect the fact that the asm statement can modify the value of the local variable loops. Which it does.

Specifying the wrong constraint may lead to undefined behavior, it may clobber random stuff (e.g. local variable, important temporary value in regs, etc.). This is especially dangerous when the compiler decides to inline the function and since it doesn't know that the value gets modified, it might decide to use it from a register directly without reloading it.

Change the constraint to "+a" to denote that the first argument is an input and an output argument.

[ bp: Fix typo, massage commit message. ]

Fixes: e01b70ef3eb3 ("x86: fix bug in arch/i386/lib/delay.c file, delay_loop function") Signed-off-by: Ammar Faizi ammarfaizi2@gnuweeb.org Signed-off-by: Borislav Petkov bp@suse.de Link: https://lore.kernel.org/r/20220329104705.65256-2-ammarfaizi2@gnuweeb.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/lib/delay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c index 614c2c6b1959..68ca883abfdb 100644 --- a/arch/x86/lib/delay.c +++ b/arch/x86/lib/delay.c @@ -43,8 +43,8 @@ static void delay_loop(unsigned long loops) " jnz 2b \n" "3: dec %0 \n"

- : /* we don't need output */ - :"a" (loops) + : "+a" (loops) + : ); }

From: Maxime Ripard maxime@cerno.tech

[ Upstream commit 234998df929f14d00cbf2f1e81a7facb69fd9266 ]

The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS. However, the HVS waits for VSTART to enable the FIFO and will thus start filling the FIFO before the start of the frame.

This leads to corruption at the beginning of the first frame, and content from the previous frame at the beginning of the next frames.

Since one VSTART is enough, let's get rid of it.

Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Signed-off-by: Maxime Ripard maxime@cerno.tech Acked-by: Thomas Zimmermann tzimmermann@suse.de Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vc4/vc4_txp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c index 6e23c50168f9..9b7810c3dd65 100644 --- a/drivers/gpu/drm/vc4/vc4_txp.c +++ b/drivers/gpu/drm/vc4/vc4_txp.c @@ -311,7 +311,7 @@ static void vc4_txp_connector_atomic_commit(struct drm_connector *conn, if (WARN_ON(i == ARRAY_SIZE(drm_fmts))) return;

- ctrl = TXP_GO | TXP_VSTART_AT_EOF | TXP_EI | + ctrl = TXP_GO | TXP_EI | VC4_SET_FIELD(0xf, TXP_BYTE_ENABLE) | VC4_SET_FIELD(txp_fmts[i], TXP_FORMAT);

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit a75971bc2b8453630e9f85e0beaa4da8db8277a3 ]

There's no real reason not to send the SSID to userspace when it requests information about P2P_GO, it is, in that respect, exactly the same as AP interfaces. Fix that.

Fixes: 44905265bc15 ("nl80211: don't expose wdev->ssid for most interfaces") Signed-off-by: Johannes Berg johannes.berg@intel.com Link: https://lore.kernel.org/r/20220318134656.14354ae223f0.Ia25e85a512281b92e1645... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 2799ff117f5a..534f57363f4a 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2885,6 +2885,7 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flag wdev_lock(wdev); switch (wdev->iftype) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: if (wdev->ssid_len && nla_put(msg, NL80211_ATTR_SSID, wdev->ssid_len, wdev->ssid)) goto nla_put_failure_locked;

From: Lin Ma linma@zju.edu.cn

[ Upstream commit 1b0e81416a24d6e9b8c2341e22e8bf48f8b8bfc9 ]

Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced.

The crash trace in latest kernel (5.18-rc2):

[ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003

[ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] __kasan_kmalloc+0x81/0xa0 [ 68.760756] rfkill_alloc+0x7f/0x280 [ 68.760756] nfc_register_device+0xa3/0x1a0 [ 68.760756] nci_register_device+0x77a/0xad0 [ 68.760756] nfcmrvl_nci_register_dev+0x20b/0x2c0 [ 68.760756] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 68.760756] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 68.760756] tty_ioctl+0x764/0x1310 [ 68.760756] __x64_sys_ioctl+0x122/0x190 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] [ 68.760756] Freed by task 314: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] kasan_set_track+0x21/0x30 [ 68.760756] kasan_set_free_info+0x20/0x30 [ 68.760756] __kasan_slab_free+0x108/0x170 [ 68.760756] kfree+0xb0/0x330 [ 68.760756] device_release+0x96/0x200 [ 68.760756] kobject_put+0xf9/0x1d0 [ 68.760756] nfc_unregister_device+0x77/0x190 [ 68.760756] nfcmrvl_nci_unregister_dev+0x88/0xd0 [ 68.760756] nci_uart_tty_close+0xdf/0x180 [ 68.760756] tty_ldisc_kill+0x73/0x110 [ 68.760756] tty_ldisc_hangup+0x281/0x5b0 [ 68.760756] __tty_hangup.part.0+0x431/0x890 [ 68.760756] tty_release+0x3a8/0xc80 [ 68.760756] __fput+0x1f0/0x8c0 [ 68.760756] task_work_run+0xc9/0x170 [ 68.760756] exit_to_user_mode_prepare+0x194/0x1a0 [ 68.760756] syscall_exit_to_user_mode+0x19/0x50 [ 68.760756] do_syscall_64+0x48/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae

This patch just add the null out of dev->rfkill to make sure such dereference cannot happen. This is safe since the device_lock() already protect the check/write from data race.

Fixes: 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") Signed-off-by: Lin Ma linma@zju.edu.cn Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/nfc/core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/net/nfc/core.c b/net/nfc/core.c index 54168bbc07cb..a84f824da051 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -1171,6 +1171,7 @@ void nfc_unregister_device(struct nfc_dev *dev) if (dev->rfkill) { rfkill_unregister(dev->rfkill); rfkill_destroy(dev->rfkill); + dev->rfkill = NULL; } dev->shutting_down = true; device_unlock(&dev->dev);

From: Jonathan Teh jonathan.teh@outlook.com

[ Upstream commit 116c3f4a78ebe478d5ad5a038baf931e93e7d748 ]

Increase maximum brightness for Dream Cheeky to 63. Emperically determined based on testing in kernel 4.4 on this device:

Bus 003 Device 002: ID 1d34:0004 Dream Cheeky Webmail Notifier

Fixes: 6c7ad07e9e05 ("HID: migrate USB LED driver from usb misc to hid") Signed-off-by: Jonathan Teh jonathan.teh@outlook.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-led.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-led.c b/drivers/hid/hid-led.c index d3e1ab162f7c..7fc5982a0ca4 100644 --- a/drivers/hid/hid-led.c +++ b/drivers/hid/hid-led.c @@ -369,7 +369,7 @@ static const struct hidled_config hidled_configs[] = { .type = DREAM_CHEEKY, .name = "Dream Cheeky Webmail Notifier", .short_name = "dream_cheeky", - .max_brightness = 31, + .max_brightness = 63, .num_leds = 1, .report_size = 9, .report_type = RAW_REQUEST,

From: Zheng Yongjun zhengyongjun3@huawei.com

[ Upstream commit cc470d55343056d6b2a5c32e10e0aad06f324078 ]

If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors.

Fixes: deba25800a12b ("spi: Add driver for IMG SPFI controller") Signed-off-by: Zheng Yongjun zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20220422062641.10486-1-zhengyongjun3@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-img-spfi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index 25a545c985d4..c63cceec6312 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -774,7 +774,7 @@ static int img_spfi_resume(struct device *dev) int ret;

ret = pm_runtime_get_sync(dev); - if (ret) { + if (ret < 0) { pm_runtime_put_noidle(dev); return ret; }

From: Amir Goldstein amir73il@gmail.com

[ Upstream commit a32e697cda27679a0327ae2cafdad8c7170f548f ]

The inotify mask flags IN_ONESHOT and IN_EXCL_UNLINK are not "internal to kernel" and should be exposed in procfs fdinfo so CRIU can restore them.

Fixes: 6933599697c9 ("inotify: hide internal kernel bits from fdinfo") Link: https://lore.kernel.org/r/20220422120327.3459282-2-amir73il@gmail.com Signed-off-by: Amir Goldstein amir73il@gmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/notify/fdinfo.c | 11 ++--------- fs/notify/inotify/inotify.h | 12 ++++++++++++ fs/notify/inotify/inotify_user.c | 2 +- 3 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c index 86fcf5814279..74aeabbf0ea4 100644 --- a/fs/notify/fdinfo.c +++ b/fs/notify/fdinfo.c @@ -83,16 +83,9 @@ static void inotify_fdinfo(struct seq_file *m, struct fsnotify_mark *mark) inode_mark = container_of(mark, struct inotify_inode_mark, fsn_mark); inode = igrab(fsnotify_conn_inode(mark->connector)); if (inode) { - /* - * IN_ALL_EVENTS represents all of the mask bits - * that we expose to userspace. There is at - * least one bit (FS_EVENT_ON_CHILD) which is - * used only internally to the kernel. - */ - u32 mask = mark->mask & IN_ALL_EVENTS; - seq_printf(m, "inotify wd:%x ino:%lx sdev:%x mask:%x ignored_mask:%x ", + seq_printf(m, "inotify wd:%x ino:%lx sdev:%x mask:%x ignored_mask:0 ", inode_mark->wd, inode->i_ino, inode->i_sb->s_dev, - mask, mark->ignored_mask); + inotify_mark_user_mask(mark)); show_mark_fhandle(m, inode); seq_putc(m, '\n'); iput(inode); diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h index 7e4578d35b61..5d94c00b1233 100644 --- a/fs/notify/inotify/inotify.h +++ b/fs/notify/inotify/inotify.h @@ -21,6 +21,18 @@ static inline struct inotify_event_info *INOTIFY_E(struct fsnotify_event *fse) return container_of(fse, struct inotify_event_info, fse); }

+/* + * INOTIFY_USER_FLAGS represents all of the mask bits that we expose to + * userspace. There is at least one bit (FS_EVENT_ON_CHILD) which is + * used only internally to the kernel. + */ +#define INOTIFY_USER_MASK (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK) + +static inline __u32 inotify_mark_user_mask(struct fsnotify_mark *fsn_mark) +{ + return fsn_mark->mask & INOTIFY_USER_MASK; +} + extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark, struct fsnotify_group *group); extern int inotify_handle_event(struct fsnotify_group *group, diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index 97a51690338e..83d0b9356844 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -96,7 +96,7 @@ static inline __u32 inotify_arg_to_mask(u32 arg) mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD | FS_UNMOUNT);

/* mask off the flags used to open the fd */ - mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK)); + mask |= (arg & INOTIFY_USER_MASK);

return mask; }

From: Nuno Sá nuno.sa@analog.com

[ Upstream commit 5f756a2eaa4436d7d3dc1e040147f5e992ae34b5 ]

We should not break overlay notifications on NOTIFY_{OK|STOP} otherwise we might break on the first fragment. We should only stop notifications if a *real* errno is returned by one of the listeners.

Fixes: a1d19bd4cf1fe ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove") Signed-off-by: Nuno Sá nuno.sa@analog.com Signed-off-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/of/overlay.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index a77bfeac867d..fef5b6c2fae2 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -170,9 +170,7 @@ static int overlay_notify(struct overlay_changeset *ovcs,

ret = blocking_notifier_call_chain(&overlay_notify_chain, action, &nd); - if (ret == NOTIFY_OK || ret == NOTIFY_STOP) - return 0; - if (ret) { + if (notifier_to_errno(ret)) { ret = notifier_to_errno(ret); pr_err("overlay changeset %s notifier error %d, target: %pOF\n", of_overlay_action_name[action], ret, nd.target);

From: Matthieu Baerts matthieu.baerts@tessares.net

[ Upstream commit b0b592cf08367719e1d1ef07c9f136e8c17f7ec3 ]

Since

e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")

kmemleak reports this issue:

unreferenced object 0xffff888009cedc00 (size 256): comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H....... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: msr_build_context (include/linux/slab.h:621) pm_check_save_msr (arch/x86/power/cpu.c:520) do_one_initcall (init/main.c:1298) kernel_init_freeable (init/main.c:1370) kernel_init (init/main.c:1504) ret_from_fork (arch/x86/entry/entry_64.S:304)

Reproducer:

- boot the VM with a debug kernel config (see https://github.com/multipath-tcp/mptcp_net-next/issues/268) - wait ~1 minute - start a kmemleak scan

The root cause here is alignment within the packed struct saved_context (from suspend_64.h). Kmemleak only searches for pointers that are aligned (see how pointers are scanned in kmemleak.c), but pahole shows that the saved_msrs struct member and all members after it in the structure are unaligned:

struct saved_context { struct pt_regs regs; /* 0 168 */ /* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */ u16 ds; /* 168 2 */

...

u64 misc_enable; /* 232 8 */ bool misc_enable_saved; /* 240 1 */

/* Note below odd offset values for the remainder of this struct */

struct saved_msrs saved_msrs; /* 241 16 */ /* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */ long unsigned int efer; /* 257 8 */ u16 gdt_pad; /* 265 2 */ struct desc_ptr gdt_desc; /* 267 10 */ u16 idt_pad; /* 277 2 */ struct desc_ptr idt; /* 279 10 */ u16 ldt; /* 289 2 */ u16 tss; /* 291 2 */ long unsigned int tr; /* 293 8 */ long unsigned int safety; /* 301 8 */ long unsigned int return_address; /* 309 8 */

/* size: 317, cachelines: 5, members: 25 */ /* last cacheline: 61 bytes */ } __attribute__((__packed__));

Move misc_enable_saved to the end of the struct declaration so that saved_msrs fits in before the cacheline 4 boundary.

The comment above the saved_context declaration says to fix wakeup_64.S file and __save/__restore_processor_state() if the struct is modified: it looks like all the accesses in wakeup_64.S are done through offsets which are computed at build-time. Update that comment accordingly.

At the end, the false positive kmemleak report is due to a limitation from kmemleak but it is always good to avoid unaligned members for optimisation purposes.

Please note that it looks like this issue is not new, e.g.

https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.ne... https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg....

[ bp: Massage + cleanup commit message. ]

Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume") Suggested-by: Mat Martineau mathew.j.martineau@linux.intel.com Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.n... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/suspend_32.h | 2 +- arch/x86/include/asm/suspend_64.h | 12 ++++++++---- 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h index 8be6afb58471..32662cbaa27e 100644 --- a/arch/x86/include/asm/suspend_32.h +++ b/arch/x86/include/asm/suspend_32.h @@ -21,7 +21,6 @@ struct saved_context { #endif unsigned long cr0, cr2, cr3, cr4; u64 misc_enable; - bool misc_enable_saved; struct saved_msrs saved_msrs; struct desc_ptr gdt_desc; struct desc_ptr idt; @@ -30,6 +29,7 @@ struct saved_context { unsigned long tr; unsigned long safety; unsigned long return_address; + bool misc_enable_saved; } __attribute__((packed));

#endif /* _ASM_X86_SUSPEND_32_H */ diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h index a7af9f53c0cb..b2861400c6a2 100644 --- a/arch/x86/include/asm/suspend_64.h +++ b/arch/x86/include/asm/suspend_64.h @@ -14,9 +14,13 @@ * Image of the saved processor state, used by the low level ACPI suspend to * RAM code and by the low level hibernation code. * - * If you modify it, fix arch/x86/kernel/acpi/wakeup_64.S and make sure that - * __save/__restore_processor_state(), defined in arch/x86/kernel/suspend_64.c, - * still work as required. + * If you modify it, check how it is used in arch/x86/kernel/acpi/wakeup_64.S + * and make sure that __save/__restore_processor_state(), defined in + * arch/x86/power/cpu.c, still work as required. + * + * Because the structure is packed, make sure to avoid unaligned members. For + * optimisation purposes but also because tools like kmemleak only search for + * pointers that are aligned. */ struct saved_context { struct pt_regs regs; @@ -36,7 +40,6 @@ struct saved_context {

unsigned long cr0, cr2, cr3, cr4, cr8; u64 misc_enable; - bool misc_enable_saved; struct saved_msrs saved_msrs; unsigned long efer; u16 gdt_pad; /* Unused */ @@ -48,6 +51,7 @@ struct saved_context { unsigned long tr; unsigned long safety; unsigned long return_address; + bool misc_enable_saved; } __attribute__((packed));

#define loaddebug(thread,register) \

From: Vinod Polimera quic_vpolimer@quicinc.com

[ Upstream commit fa5186b279ecf44b14fb435540d2065be91cb1ed ]

BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3

Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Vinod Polimera quic_vpolimer@quicinc.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/483255/ Link: https://lore.kernel.org/r/1650857213-30075-1-git-send-email-quic_vpolimer@qu... [DB: fixed Fixes tag] Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 52474dcd2573..c88bb92282df 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -657,8 +657,10 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms) for (i = 0; i < dpu_kms->catalog->vbif_count; i++) { u32 vbif_idx = dpu_kms->catalog->vbif[i].id;

- if ((vbif_idx < VBIF_MAX) && dpu_kms->hw_vbif[vbif_idx]) + if ((vbif_idx < VBIF_MAX) && dpu_kms->hw_vbif[vbif_idx]) { dpu_hw_vbif_destroy(dpu_kms->hw_vbif[vbif_idx]); + dpu_kms->hw_vbif[vbif_idx] = NULL; + } } }

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit a36e506711548df923ceb7ec9f6001375be799a5 ]

It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value.

Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/482992/ Link: https://lore.kernel.org/r/20220422032227.2991553-1-yangyingliang@huawei.com Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/hdmi/hdmi.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c index 33e083f71a17..0b7cb90d2826 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c @@ -148,6 +148,10 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev) /* HDCP needs physical address of hdmi register */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, config->mmio_name); + if (!res) { + ret = -EINVAL; + goto fail; + } hdmi->mmio_phy_addr = res->start;

hdmi->qfprom_mmio = msm_ioremap(pdev,

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 12441ccdf5e2f5a01a46e344976cbbd3d46845c9 ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument (no '=') or environment (with '=') strings. So return 1 from these x86 __setup handlers.

Examples:

Unknown kernel command line parameters "apicpmtimer BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be passed to user space.

Run /sbin/init as init process with arguments: /sbin/init apicpmtimer with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Fixes: 77b52b4c5c66 ("x86: add "debugpat" boot option") Fixes: e16fd002afe2 ("x86/cpufeature: Enable RING3MWAIT for Knights Landing") Fixes: b8ce33590687 ("x86_64: convert to clock events") Reported-by: Igor Zhbanov i.zhbanov@omprussia.ru Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Borislav Petkov bp@suse.de Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/entry/vdso/vma.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/cpu/intel.c | 2 +- arch/x86/mm/pat.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c index 46caca4d9141..a1c31bb23170 100644 --- a/arch/x86/entry/vdso/vma.c +++ b/arch/x86/entry/vdso/vma.c @@ -329,7 +329,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) static __init int vdso_setup(char *s) { vdso64_enabled = simple_strtoul(s, NULL, 0); - return 0; + return 1; } __setup("vdso=", vdso_setup); #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 9791828f3fcd..926939978c1c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -166,7 +166,7 @@ static __init int setup_apicpmtimer(char *s) { apic_calibrate_pmtmr = 1; notsc_setup(NULL); - return 0; + return 1; } __setup("apicpmtimer", setup_apicpmtimer); #endif diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index a5287b18a63f..76692590eff8 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -71,7 +71,7 @@ static bool ring3mwait_disabled __read_mostly; static int __init ring3mwait_disable(char *__unused) { ring3mwait_disabled = true; - return 0; + return 1; } __setup("ring3mwait=disable", ring3mwait_disable);

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 324e26d0607b..b33304c0042a 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -74,7 +74,7 @@ int pat_debug_enable; static int __init pat_debug_setup(char *str) { pat_debug_enable = 1; - return 0; + return 1; } __setup("debugpat", pat_debug_setup);

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 1ef64b1e89e6d4018da46e08ffc32779a31160c7 ]

Clean up control_va_addr_alignment():

a. Make '=' required instead of optional (as documented). b. Print a warning if an invalid option value is used. c. Return 1 from the __setup handler when an invalid option value is used. This prevents the kernel from polluting init's (limited) environment space with the entire string.

Fixes: dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h") Reported-by: Igor Zhbanov i.zhbanov@omprussia.ru Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Borislav Petkov bp@suse.de Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lore.kernel.org/r/20220315001045.7680-1-rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/sys_x86_64.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 6a78d4b36a79..9fb266c797fb 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -70,9 +70,6 @@ static int __init control_va_addr_alignment(char *str) if (*str == 0) return 1;

- if (*str == '=') - str++; - if (!strcmp(str, "32")) va_align.flags = ALIGN_VA_32; else if (!strcmp(str, "64")) @@ -82,11 +79,11 @@ static int __init control_va_addr_alignment(char *str) else if (!strcmp(str, "on")) va_align.flags = ALIGN_VA_32 | ALIGN_VA_64; else - return 0; + pr_warn("invalid option value: 'align_va_addr=%s'\n", str);

return 1; } -__setup("align_va_addr", control_va_addr_alignment); +__setup("align_va_addr=", control_va_addr_alignment);

SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags,

From: Jessica Zhang quic_jesszhan@quicinc.com

[ Upstream commit ca75f6f7c6f89365e40f10f641b15981b1f07c31 ]

There is a possibility for mdp5_get_global_state to return -EDEADLK when acquiring the modeset lock, but currently global_state in mdp5_mixer_release doesn't check for if an error is returned.

To avoid a NULL dereference error, let's have mdp5_mixer_release check if an error is returned and propagate that error.

Reported-by: Tomeu Vizoso tomeu.vizoso@collabora.com Signed-off-by: Jessica Zhang quic_jesszhan@quicinc.com Fixes: 7907a0d77cb4 ("drm/msm/mdp5: Use the new private_obj state") Reviewed-by: Rob Clark robdclark@gmail.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/485181/ Link: https://lore.kernel.org/r/20220505214051.155-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 10 ++++++++-- drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.c | 15 +++++++++++---- drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.h | 4 ++-- 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c index aa28a43ff842..76639a108ff5 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c @@ -537,9 +537,15 @@ int mdp5_crtc_setup_pipeline(struct drm_crtc *crtc, if (ret) return ret;

- mdp5_mixer_release(new_crtc_state->state, old_mixer); + ret = mdp5_mixer_release(new_crtc_state->state, old_mixer); + if (ret) + return ret; + if (old_r_mixer) { - mdp5_mixer_release(new_crtc_state->state, old_r_mixer); + ret = mdp5_mixer_release(new_crtc_state->state, old_r_mixer); + if (ret) + return ret; + if (!need_right_mixer) pipeline->r_mixer = NULL; } diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.c index 113e6b569562..9c8275300b55 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.c @@ -127,21 +127,28 @@ int mdp5_mixer_assign(struct drm_atomic_state *s, struct drm_crtc *crtc, return 0; }

-void mdp5_mixer_release(struct drm_atomic_state *s, struct mdp5_hw_mixer *mixer) +int mdp5_mixer_release(struct drm_atomic_state *s, struct mdp5_hw_mixer *mixer) { struct mdp5_global_state *global_state = mdp5_get_global_state(s); - struct mdp5_hw_mixer_state *new_state = &global_state->hwmixer; + struct mdp5_hw_mixer_state *new_state;

if (!mixer) - return; + return 0; + + if (IS_ERR(global_state)) + return PTR_ERR(global_state); + + new_state = &global_state->hwmixer;

if (WARN_ON(!new_state->hwmixer_to_crtc[mixer->idx])) - return; + return -EINVAL;

DBG("%s: release from crtc %s", mixer->name, new_state->hwmixer_to_crtc[mixer->idx]->name);

new_state->hwmixer_to_crtc[mixer->idx] = NULL; + + return 0; }

void mdp5_mixer_destroy(struct mdp5_hw_mixer *mixer) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.h b/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.h index 9be94f567fbd..6bcb0b544665 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.h +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_mixer.h @@ -41,7 +41,7 @@ void mdp5_mixer_destroy(struct mdp5_hw_mixer *lm); int mdp5_mixer_assign(struct drm_atomic_state *s, struct drm_crtc *crtc, uint32_t caps, struct mdp5_hw_mixer **mixer, struct mdp5_hw_mixer **r_mixer); -void mdp5_mixer_release(struct drm_atomic_state *s, - struct mdp5_hw_mixer *mixer); +int mdp5_mixer_release(struct drm_atomic_state *s, + struct mdp5_hw_mixer *mixer);

#endif /* __MDP5_LM_H__ */

From: Xiaomeng Tong xiam0nd.tong@gmail.com

[ Upstream commit 261f33388c29f6f3c12a724e6d89172b7f6d5996 ]

The list iterator will point to a bogus position containing HEAD if the list is empty or the element is not found in list. This case should be checked before any use of the iterator, otherwise it will lead to a invalid memory access. The missing check here is before "pin = iterm->id;", just add check here to fix the security bug.

In addition, the list iterator value will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the element is not found in list, considering the (mis)use here: "if (iterm == NULL".

Use a new value 'it' as the list iterator, while use the old value 'iterm' as a dedicated pointer to point to the found element, which 1. can fix this bug, due to 'iterm' is NULL only if it's not found. 2. do not need to change all the uses of 'iterm' after the loop. 3. can also limit the scope of the list iterator 'it' *only inside* the traversal loop by simply declaring 'it' inside the loop in the future, as usage of the iterator outside of the list_for_each_entry is considered harmful. https://lkml.org/lkml/2022/2/17/1032

Fixes: d5e90b7a6cd1c ("[media] uvcvideo: Move to video_ioctl2") Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_v4l2.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index e858f4f189ed..0371a4a1cd12 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -865,29 +865,31 @@ static int uvc_ioctl_enum_input(struct file *file, void *fh, struct uvc_video_chain *chain = handle->chain; const struct uvc_entity *selector = chain->selector; struct uvc_entity *iterm = NULL; + struct uvc_entity *it; u32 index = input->index; - int pin = 0;

if (selector == NULL || (chain->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { if (index != 0) return -EINVAL; - list_for_each_entry(iterm, &chain->entities, chain) { - if (UVC_ENTITY_IS_ITERM(iterm)) + list_for_each_entry(it, &chain->entities, chain) { + if (UVC_ENTITY_IS_ITERM(it)) { + iterm = it; break; + } } - pin = iterm->id; } else if (index < selector->bNrInPins) { - pin = selector->baSourceID[index]; - list_for_each_entry(iterm, &chain->entities, chain) { - if (!UVC_ENTITY_IS_ITERM(iterm)) + list_for_each_entry(it, &chain->entities, chain) { + if (!UVC_ENTITY_IS_ITERM(it)) continue; - if (iterm->id == pin) + if (it->id == selector->baSourceID[index]) { + iterm = it; break; + } } }

- if (iterm == NULL || iterm->id != pin) + if (iterm == NULL) return -EINVAL;

memset(input, 0, sizeof(*input));

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 2be84f73785fa9ed6443e3c5b158730266f1c2ee ]

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done.

Fixes: 08641c7c74dd ("ASoC: mxs: add device tree support for mxs-saif") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220511133725.39039-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mxs/mxs-saif.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 93c019670199..6d0ab4e75518 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -780,6 +780,7 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->master_id = saif->id; } else { ret = of_alias_get_id(master, "saif"); + of_node_put(master); if (ret < 0) return ret; else

From: Josh Poimboeuf jpoimboe@kernel.org

[ Upstream commit 1d1a0e7c5100d332583e20b40aa8c0a8ed3d7849 ]

There have been some recent reports of faddr2line failures:

$ scripts/faddr2line sound/soundcore.ko sound_devnode+0x5/0x35 bad symbol size: base: 0x0000000000000000 end: 0x0000000000000000

$ ./scripts/faddr2line vmlinux.o enter_from_user_mode+0x24 bad symbol size: base: 0x0000000000005fe0 end: 0x0000000000005fe0

The problem is that faddr2line is based on 'nm', which has a major limitation: it doesn't know how to distinguish between different text sections. So if an offset exists in multiple text sections in the object, it may fail.

Rewrite faddr2line to be section-aware, by basing it on readelf.

Fixes: 67326666e2d4 ("scripts: add script for translating stack dump function offsets") Reported-by: Kaiwan N Billimoria kaiwan.billimoria@gmail.com Reported-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Josh Poimboeuf jpoimboe@kernel.org Link: https://lore.kernel.org/r/29ff99f86e3da965b6e46c1cc2d72ce6528c17c3.165238232... Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/faddr2line | 150 +++++++++++++++++++++++++++++---------------- 1 file changed, 97 insertions(+), 53 deletions(-)

diff --git a/scripts/faddr2line b/scripts/faddr2line index a0149db00be7..226c3f559dc5 100755 --- a/scripts/faddr2line +++ b/scripts/faddr2line @@ -44,17 +44,6 @@ set -o errexit set -o nounset

-READELF="${CROSS_COMPILE:-}readelf" -ADDR2LINE="${CROSS_COMPILE:-}addr2line" -SIZE="${CROSS_COMPILE:-}size" -NM="${CROSS_COMPILE:-}nm" - -command -v awk >/dev/null 2>&1 || die "awk isn't installed" -command -v ${READELF} >/dev/null 2>&1 || die "readelf isn't installed" -command -v ${ADDR2LINE} >/dev/null 2>&1 || die "addr2line isn't installed" -command -v ${SIZE} >/dev/null 2>&1 || die "size isn't installed" -command -v ${NM} >/dev/null 2>&1 || die "nm isn't installed" - usage() { echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2 exit 1 @@ -69,6 +58,14 @@ die() { exit 1 }

+READELF="${CROSS_COMPILE:-}readelf" +ADDR2LINE="${CROSS_COMPILE:-}addr2line" +AWK="awk" + +command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed" +command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed" +command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed" + # Try to figure out the source directory prefix so we can remove it from the # addr2line output. HACK ALERT: This assumes that start_kernel() is in # kernel/init.c! This only works for vmlinux. Otherwise it falls back to @@ -76,7 +73,7 @@ die() { find_dir_prefix() { local objfile=$1

- local start_kernel_addr=$(${READELF} -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}') + local start_kernel_addr=$(${READELF} --symbols --wide $objfile | ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}') [[ -z $start_kernel_addr ]] && return

local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr) @@ -97,86 +94,133 @@ __faddr2line() { local dir_prefix=$3 local print_warnings=$4

- local func=${func_addr%+*} + local sym_name=${func_addr%+*} local offset=${func_addr#*+} offset=${offset%/*} - local size= - [[ $func_addr =~ "/" ]] && size=${func_addr#*/} + local user_size= + [[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}

- if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then + if [[ -z $sym_name ]] || [[ -z $offset ]] || [[ $sym_name = $func_addr ]]; then warn "bad func+offset $func_addr" DONE=1 return fi

# Go through each of the object's symbols which match the func name. - # In rare cases there might be duplicates. - file_end=$(${SIZE} -Ax $objfile | awk '$1 == ".text" {print $2}') - while read symbol; do - local fields=($symbol) - local sym_base=0x${fields[0]} - local sym_type=${fields[1]} - local sym_end=${fields[3]} - - # calculate the size - local sym_size=$(($sym_end - $sym_base)) + # In rare cases there might be duplicates, in which case we print all + # matches. + while read line; do + local fields=($line) + local sym_addr=0x${fields[1]} + local sym_elf_size=${fields[2]} + local sym_sec=${fields[6]} + + # Get the section size: + local sec_size=$(${READELF} --section-headers --wide $objfile | + sed 's/[ /[/' | + ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }') + + if [[ -z $sec_size ]]; then + warn "bad section size: section: $sym_sec" + DONE=1 + return + fi + + # Calculate the symbol size. + # + # Unfortunately we can't use the ELF size, because kallsyms + # also includes the padding bytes in its size calculation. For + # kallsyms, the size calculation is the distance between the + # symbol and the next symbol in a sorted list. + local sym_size + local cur_sym_addr + local found=0 + while read line; do + local fields=($line) + cur_sym_addr=0x${fields[1]} + local cur_sym_elf_size=${fields[2]} + local cur_sym_name=${fields[7]:-} + + if [[ $cur_sym_addr = $sym_addr ]] && + [[ $cur_sym_elf_size = $sym_elf_size ]] && + [[ $cur_sym_name = $sym_name ]]; then + found=1 + continue + fi + + if [[ $found = 1 ]]; then + sym_size=$(($cur_sym_addr - $sym_addr)) + [[ $sym_size -lt $sym_elf_size ]] && continue; + found=2 + break + fi + done < <(${READELF} --symbols --wide $objfile | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2) + + if [[ $found = 0 ]]; then + warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size" + DONE=1 + return + fi + + # If nothing was found after the symbol, assume it's the last + # symbol in the section. + [[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr)) + if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then - warn "bad symbol size: base: $sym_base end: $sym_end" + warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr" DONE=1 return fi + sym_size=0x$(printf %x $sym_size)

- # calculate the address - local addr=$(($sym_base + $offset)) + # Calculate the section address from user-supplied offset: + local addr=$(($sym_addr + $offset)) if [[ -z $addr ]] || [[ $addr = 0 ]]; then - warn "bad address: $sym_base + $offset" + warn "bad address: $sym_addr + $offset" DONE=1 return fi addr=0x$(printf %x $addr)

- # weed out non-function symbols - if [[ $sym_type != t ]] && [[ $sym_type != T ]]; then - [[ $print_warnings = 1 ]] && - echo "skipping $func address at $addr due to non-function symbol of type '$sym_type'" - continue - fi - - # if the user provided a size, make sure it matches the symbol's size - if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then + # If the user provided a size, make sure it matches the symbol's size: + if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then [[ $print_warnings = 1 ]] && - echo "skipping $func address at $addr due to size mismatch ($size != $sym_size)" + echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)" continue; fi

- # make sure the provided offset is within the symbol's range + # Make sure the provided offset is within the symbol's range: if [[ $offset -gt $sym_size ]]; then [[ $print_warnings = 1 ]] && - echo "skipping $func address at $addr due to size mismatch ($offset > $sym_size)" + echo "skipping $sym_name address at $addr due to size mismatch ($offset > $sym_size)" continue fi

- # separate multiple entries with a blank line + # In case of duplicates or multiple addresses specified on the + # cmdline, separate multiple entries with a blank line: [[ $FIRST = 0 ]] && echo FIRST=0

- # pass real address to addr2line - echo "$func+$offset/$sym_size:" - local file_lines=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix(./)*; ;") - [[ -z $file_lines ]] && return + echo "$sym_name+$offset/$sym_size:"

+ # Pass section address to addr2line and strip absolute paths + # from the output: + local output=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix(./)*; ;") + [[ -z $output ]] && continue + + # Default output (non --list): if [[ $LIST = 0 ]]; then - echo "$file_lines" | while read -r line + echo "$output" | while read -r line do echo $line done DONE=1; - return + continue fi

- # show each line with context - echo "$file_lines" | while read -r line + # For --list, show each line with its corresponding source code: + echo "$output" | while read -r line do echo echo $line @@ -184,12 +228,12 @@ __faddr2line() { n1=$[$n-5] n2=$[$n+5] f=$(echo $line | sed 's/.*at (.+):.*/\1/g') - awk 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f + ${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f done

DONE=1

- done < <(${NM} -n $objfile | awk -v fn=$func -v end=$file_end '$3 == fn { found=1; line=$0; start=$1; next } found == 1 { found=0; print line, "0x"$1 } END {if (found == 1) print line, end; }') + done < <(${READELF} --symbols --wide $objfile | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn') }

[[ $# -lt 2 ]] && usage

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 9fadab72a6916c7507d7fedcd644859eef995078 ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare, other than clk_disable.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: b4155d7d5b2c ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/exynos4-is/fimc-is.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 0fe9be93fabe..0f3f82bd4d20 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -144,7 +144,7 @@ static int fimc_is_enable_clocks(struct fimc_is *is) dev_err(&is->pdev->dev, "clock %s enable failed\n", fimc_is_clocks[i]); for (--i; i >= 0; i--) - clk_disable(is->clocks[i]); + clk_disable_unprepare(is->clocks[i]); return ret; } pr_debug("enabled clock: %s\n", fimc_is_clocks[i]);

From: Michael Rodin mrodin@de.adit-jv.com

[ Upstream commit 5f25abec8f21b7527c1223a354d23c270befddb3 ]

The vertical subsampling factor is currently not considered in the offset calculation for plane cropping done in rpf_configure_partition. This causes a distortion (shift of the color plane) when formats with the vsub factor larger than 1 are used (e.g. NV12, see vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor for all planes except plane 0 (luminance).

Drop generalization of the offset calculation to reduce the binary size.

Fixes: e5ad37b64de9 ("[media] v4l: vsp1: Add cropping support") Signed-off-by: Michael Rodin mrodin@de.adit-jv.com Signed-off-by: LUU HOAI hoai.luu.ub@renesas.com Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/vsp1/vsp1_rpf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c index f8005b60b9d2..abaf4dde3802 100644 --- a/drivers/media/platform/vsp1/vsp1_rpf.c +++ b/drivers/media/platform/vsp1/vsp1_rpf.c @@ -290,11 +290,11 @@ static void rpf_configure_partition(struct vsp1_entity *entity, + crop.left * fmtinfo->bpp[0] / 8;

if (format->num_planes > 1) { + unsigned int bpl = format->plane_fmt[1].bytesperline; unsigned int offset;

- offset = crop.top * format->plane_fmt[1].bytesperline - + crop.left / fmtinfo->hsub - * fmtinfo->bpp[1] / 8; + offset = crop.top / fmtinfo->vsub * bpl + + crop.left / fmtinfo->hsub * fmtinfo->bpp[1] / 8; mem.addr[1] += offset; mem.addr[2] += offset; }

From: Geert Uytterhoeven geert@linux-m68k.org

[ Upstream commit ed6bc6bf0a7d75e80eb1df883c09975ebb74e590 ]

If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y:

{standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored {standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,#8},%d0' ignored {standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored {standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored

The math emulation support code is intended for 68020 and higher, and uses several instructions or instruction modes not available on coldfire or 68000.

Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU support was only available on 68020 or higher. But this assumption was broken by the introduction of MMU support for M547x and M548x.

Drop the dependency on MMU, as the code should work fine on 68020 and up without MMU (which are not yet supported by Linux, though). Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel has some type of floating-point support --- be it hardware or software emulated, to rule out anything below 68020).

Fixes: 1f7034b9616e6f14 ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled") Reported-by: kernel test robot lkp@intel.com Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Reviewed-by: Greg Ungerer gerg@linux-m68k.org Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.165244611... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/Kconfig.cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 21f00349af52..b2fd1e2fbd89 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -308,7 +308,7 @@ comment "Processor Specific Options"

config M68KFPU_EMU bool "Math emulation support" - depends on MMU + depends on M68KCLASSIC && FPU help At some point in the future, this will cause floating-point math instructions to be emulated by the kernel on machines that lack a

From: Eric Biggers ebiggers@google.com

[ Upstream commit cb8435dc8ba33bcafa41cf2aa253794320a3b8df ]

The 'commit' option is only applicable for ext3 and ext4 filesystems, and has never been accepted by the ext2 filesystem driver, so the ext4 driver shouldn't allow it on ext2 filesystems.

This fixes a failure in xfstest ext4/053.

Fixes: 8dc0aa8cf0f7 ("ext4: check incompatible mount options while mounting ext2/3") Signed-off-by: Eric Biggers ebiggers@google.com Reviewed-by: Ritesh Harjani ritesh.list@gmail.com Reviewed-by: Lukas Czerner lczerner@redhat.com Link: https://lore.kernel.org/r/20220510183232.172615-1-ebiggers@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6893b87c7354..bf120842a307 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1688,6 +1688,7 @@ static const struct mount_opts { MOPT_EXT4_ONLY | MOPT_CLEAR}, {Opt_warn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_SET}, {Opt_nowarn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_CLEAR}, + {Opt_commit, 0, MOPT_NO_EXT2}, {Opt_nojournal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM, MOPT_EXT4_ONLY | MOPT_CLEAR}, {Opt_journal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit be2af740e2a9c7134f2d8ab4f104006e110b13de ]

Fix the missing clk_disable_unprepare() before return from wm2000_anc_transition() in the error handling case.

Fixes: 514cfd6dd725 ("ASoC: wm2000: Integrate with clock API") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20220514091053.686416-1-yangyingliang@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm2000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index c5ae07234a00..cad39f63b763 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -545,7 +545,7 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, { struct i2c_client *i2c = wm2000->i2c; int i, j; - int ret; + int ret = 0;

if (wm2000->anc_mode == mode) return 0; @@ -575,13 +575,13 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, ret = anc_transitions[i].step[j](i2c, anc_transitions[i].analogue); if (ret != 0) - return ret; + break; }

if (anc_transitions[i].dest == ANC_OFF) clk_disable_unprepare(wm2000->mclk);

- return 0; + return ret; }

static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)

From: David Howells dhowells@redhat.com

[ Upstream commit 88e22159750b0d55793302eeed8ee603f5c1a95c ]

AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump up the sysctl), but whilst the preallocation circular buffers have 32 slots in them, one of them has to be a dead slot because we're using CIRC_CNT().

This means that listen(rxrpc_sock, 32) will cause an oops when the socket is closed because rxrpc_service_prealloc_one() allocated one too many calls and rxrpc_discard_prealloc() won't then be able to get rid of them because it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries to abort them, but oopses because call->peer isn't yet set.

Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match the ring capacity.

BUG: kernel NULL pointer dereference, address: 0000000000000086 ... RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc] Call Trace: <TASK> ? __wake_up_common_lock+0x7a/0x90 ? rxrpc_notify_socket+0x8e/0x140 [rxrpc] ? rxrpc_abort_call+0x4c/0x60 [rxrpc] rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc] rxrpc_release+0xc9/0x1c0 [rxrpc] __sock_release+0x37/0xa0 sock_close+0x11/0x20 __fput+0x89/0x240 task_work_run+0x59/0x90 do_exit+0x319/0xaa0

Fixes: 00e907127e6f ("rxrpc: Preallocate peers, conns and calls for incoming service requests") Reported-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com cc: linux-afs@lists.infradead.org Link: https://lists.infradead.org/pipermail/linux-afs/2022-March/005079.html Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/sysctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/rxrpc/sysctl.c b/net/rxrpc/sysctl.c index d75bd15151e6..50f825f55c21 100644 --- a/net/rxrpc/sysctl.c +++ b/net/rxrpc/sysctl.c @@ -17,7 +17,7 @@ static struct ctl_table_header *rxrpc_sysctl_reg_table; static const unsigned int one = 1; static const unsigned int four = 4; -static const unsigned int thirtytwo = 32; +static const unsigned int max_backlog = RXRPC_BACKLOG_MAX - 1; static const unsigned int n_65535 = 65535; static const unsigned int n_max_acks = RXRPC_RXTX_BUFF_SIZE - 1; static const unsigned long one_jiffy = 1; @@ -111,7 +111,7 @@ static struct ctl_table rxrpc_sysctl_table[] = { .mode = 0644, .proc_handler = proc_dointvec_minmax, .extra1 = (void *)&four, - .extra2 = (void *)&thirtytwo, + .extra2 = (void *)&max_backlog, }, { .procname = "rx_window_size",

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 8fd3f18ea31a398ecce4a6d3804433658678b0a3 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes: 50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/qcom/smp2p.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c index 7908e7f2850f..5721a353d95f 100644 --- a/drivers/soc/qcom/smp2p.c +++ b/drivers/soc/qcom/smp2p.c @@ -428,6 +428,7 @@ static int smp2p_parse_ipc(struct qcom_smp2p *smp2p) }

smp2p->ipc_regmap = syscon_node_to_regmap(syscon); + of_node_put(syscon); if (IS_ERR(smp2p->ipc_regmap)) return PTR_ERR(smp2p->ipc_regmap);

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 0aa3a0937feeb91a0e4e438c3c063b749b194192 ]

The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.

Link: https://lore.kernel.org/r/20220315065829.GA13572@kili Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pcie-cadence-ep.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-cadence-ep.c b/drivers/pci/controller/pcie-cadence-ep.c index c3a088910f48..f6da8d562b8a 100644 --- a/drivers/pci/controller/pcie-cadence-ep.c +++ b/drivers/pci/controller/pcie-cadence-ep.c @@ -178,8 +178,7 @@ static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, phys_addr_t addr, struct cdns_pcie *pcie = &ep->pcie; u32 r;

- r = find_first_zero_bit(&ep->ob_region_map, - sizeof(ep->ob_region_map) * BITS_PER_LONG); + r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG); if (r >= ep->max_regions - 1) { dev_err(&epc->dev, "no free outbound region\n"); return -EINVAL;

From: Phil Elwell phil@raspberrypi.com

[ Upstream commit 2c663e5e5bbf2a5b85e0f76ccb69663f583c3e33 ]

The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT). So fix the GPIO line names accordingly.

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Phil Elwell phil@raspberrypi.com Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 9f7145b1cc5e..3509582f92f1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -77,16 +77,18 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ "NC", /* GPIO42 */

From: Corentin Labbe clabbe@baylibre.com

[ Upstream commit 4ffa1763622ae5752961499588f3f8874315f974 ]

The DES3 ECB has an IV size set but ECB does not need one.

Fixes: 4ada483978237 ("crypto: marvell/cesa - add Triple-DES support") Signed-off-by: Corentin Labbe clabbe@baylibre.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/marvell/cipher.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/marvell/cipher.c b/drivers/crypto/marvell/cipher.c index 0ae84ec9e21c..c9b905efc448 100644 --- a/drivers/crypto/marvell/cipher.c +++ b/drivers/crypto/marvell/cipher.c @@ -625,7 +625,6 @@ struct skcipher_alg mv_cesa_ecb_des3_ede_alg = { .decrypt = mv_cesa_ecb_des3_ede_decrypt, .min_keysize = DES3_EDE_KEY_SIZE, .max_keysize = DES3_EDE_KEY_SIZE, - .ivsize = DES3_EDE_BLOCK_SIZE, .base = { .cra_name = "ecb(des3_ede)", .cra_driver_name = "mv-ecb-des3-ede",

From: Gustavo A. R. Silva gustavoars@kernel.org

[ Upstream commit 54db804d5d7d36709d1ce70bde3b9a6c61b290b6 ]

Fix the following Wstringop-overflow warnings when building with GCC-11:

drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’: drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 748 | 2, 0); | ~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ CC drivers/scsi/bnx2fc/bnx2fc_io.o In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 834 | 1, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 840 | 2, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~

by changing the array size to the correct value of ETH_ALEN in the argument declaration.

Also, fix a couple of checkpatch warnings: WARNING: function definition argument 'unsigned int' should also have an identifier name

This helps with the ongoing efforts to globally enable -Wstringop-overflow.

Link: https://github.com/KSPP/linux/issues/181 Fixes: 85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet") Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/fcoe/fcoe_ctlr.c | 2 +- include/scsi/libfcoe.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 658c0726581f..1e087a206f48 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1978,7 +1978,7 @@ EXPORT_SYMBOL(fcoe_ctlr_recv_flogi); * * Returns: u64 fc world wide name */ -u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], +u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme, unsigned int port) { u64 wwn; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index eafccb2d4d6f..71a00fb2279f 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -261,7 +261,8 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *, struct fc_frame *);

/* libfcoe funcs */ -u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); +u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme, + unsigned int port); int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *, const struct libfc_function_template *, int init_fcp); u32 fcoe_fc_crc(struct fc_frame *fp);

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 71bc7cf3be65bab441e03667cf215c557712976c ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 2f227605394b ("pinctrl: armada-37xx: Add irqchip support") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20220422105339.78810-1-krzysztof.kozlowski@linaro.... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c index e69b84d9538a..0c0f834eab82 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c @@ -773,7 +773,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev, for (i = 0; i < nr_irq_parent; i++) { int irq = irq_of_parse_and_map(np, i);

- if (irq < 0) + if (!irq) continue;

gpiochip_set_chained_irqchip(gc, irqchip, irq,

From: Muchun Song songmuchun@bytedance.com

[ Upstream commit e583b5c472bd23d450e06f148dc1f37be74f7666 ]

The flush_cache_page() only remove a PAGE_SIZE sized range from the cache. However, it does not cover the full pages in a THP except a head page. Replace it with flush_cache_range() to fix this issue. This is just a documentation issue with the respect to properly documenting the expected usage of cache flushing before modifying the pmd. However, in practice this is not a problem due to the fact that DAX is not available on architectures with virtually indexed caches per:

commit d92576f1167c ("dax: does not work correctly with virtual aliasing caches")

Link: https://lkml.kernel.org/r/20220403053957.10770-3-songmuchun@bytedance.com Fixes: f729c8c9b24f ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean") Signed-off-by: Muchun Song songmuchun@bytedance.com Reviewed-by: Dan Williams dan.j.williams@intel.com Reviewed-by: Christoph Hellwig hch@lst.de Cc: Alistair Popple apopple@nvidia.com Cc: Al Viro viro@zeniv.linux.org.uk Cc: Hugh Dickins hughd@google.com Cc: Jan Kara jack@suse.cz Cc: "Kirill A. Shutemov" kirill.shutemov@linux.intel.com Cc: Matthew Wilcox willy@infradead.org Cc: Ralph Campbell rcampbell@nvidia.com Cc: Ross Zwisler zwisler@kernel.org Cc: Xiongchun Duan duanxiongchun@bytedance.com Cc: Xiyu Yang xiyuyang19@fudan.edu.cn Cc: Yang Shi shy828301@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dax.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c index d09701aa6f2f..7451efc5020c 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -907,7 +907,8 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping, if (!pmd_dirty(*pmdp) && !pmd_write(*pmdp)) goto unlock_pmd;

- flush_cache_page(vma, address, pfn); + flush_cache_range(vma, address, + address + HPAGE_PMD_SIZE); pmd = pmdp_invalidate(vma, address, pmdp); pmd = pmd_wrprotect(pmd); pmd = pmd_mkclean(pmd);

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings.

Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from powersave_off().

Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop") Reported-by: Igor Zhbanov izh1979@gmail.com Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index d7216c9abda1..ca79aacfeda2 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -41,7 +41,7 @@ static int __init powersave_off(char *arg) { ppc_md.power_save = NULL; cpuidle_disable = IDLE_POWERSAVE_OFF; - return 0; + return 1; } __setup("powersave=off", powersave_off);

From: Alexey Dobriyan adobriyan@gmail.com

[ Upstream commit 7055197705709c59b8ab77e6a5c7d46d61edd96e ]

When a process exits, /proc/${pid}, and /proc/${pid}/net dentries are flushed. However some leaf dentries like /proc/${pid}/net/arp_cache aren't. That's because respective PDEs have proc_misc_d_revalidate() hook which returns 1 and leaves dentries/inodes in the LRU.

Force revalidation/lookup on everything under /proc/${pid}/net by inheriting proc_net_dentry_ops.

[akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/YjdVHgildbWO7diJ@localhost.localdomain Fixes: c6c75deda813 ("proc: fix lookup in /proc/net subdirectories after setns(2)") Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Reported-by: hui li juanfengpy@gmail.com Cc: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/proc/generic.c | 3 +++ fs/proc/proc_net.c | 3 +++ 2 files changed, 6 insertions(+)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c index bab10368a04d..d8b3c6a7173f 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -445,6 +445,9 @@ static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent, proc_set_user(ent, (*parent)->uid, (*parent)->gid);

ent->proc_dops = &proc_misc_dentry_ops; + /* Revalidate everything under /proc/${pid}/net */ + if ((*parent)->proc_dops == &proc_net_dentry_ops) + pde_force_lookup(ent);

out: return ent; diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index 096bcc1e7a8a..68ce173d5590 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -342,6 +342,9 @@ static __net_init int proc_net_ns_init(struct net *net)

proc_set_user(netd, uid, gid);

+ /* Seed dentry revalidation for /proc/${pid}/net */ + pde_force_lookup(netd); + err = -EEXIST; net_statd = proc_net_mkdir(net, "stat", netd); if (!net_statd)

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ]

of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/sparcspkr.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index 4a5afc7fe96e..f6e1f38267d9 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -204,6 +204,7 @@ static int bbc_beep_probe(struct platform_device *op)

info = &state->u.bbc; info->clock_freq = of_getintprop_default(dp, "clock-frequency", 0); + of_node_put(dp); if (!info->clock_freq) goto out_free;

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit fcee96924ba1596ca80a6770b2567ca546f9a482 ]

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/sysdev/fsl_rio.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 5011ffea4e4b..c48ebe677962 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -509,8 +509,10 @@ int fsl_rio_setup(struct platform_device *dev) if (rc) { dev_err(&dev->dev, "Can't get %pOF property 'reg'\n", rmu_node); + of_node_put(rmu_node); goto err_rmu; } + of_node_put(rmu_node); rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs)); if (!rmu_regs_win) { dev_err(&dev->dev, "Unable to map rmu register window\n");

From: Douglas Miller doug.miller@cornelisnetworks.com

[ Upstream commit 05c03dfd09c069c4ffd783b47b2da5dcc9421f2c ]

If there is a failure during probe of hfi1 before the sdma_map_lock is initialized, the call to hfi1_free_devdata() will attempt to use a lock that has not been initialized. If the locking correctness validator is on then an INFO message and stack trace resembling the following may be seen:

INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Call Trace: register_lock_class+0x11b/0x880 __lock_acquire+0xf3/0x7930 lock_acquire+0xff/0x2d0 _raw_spin_lock_irq+0x46/0x60 sdma_clean+0x42a/0x660 [hfi1] hfi1_free_devdata+0x3a7/0x420 [hfi1] init_one+0x867/0x11a0 [hfi1] pci_device_probe+0x40e/0x8d0

The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map memory, and sdma_map is not allocated/initialized until after sdma_map_lock has been initialized. This code only needs to be run if sdma_map is not NULL, and so checking for that condition will avoid trying to use the lock before it is initialized.

Fixes: 473291b3ea0e ("IB/hfi1: Fix for early release of sdma context") Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisn... Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Douglas Miller doug.miller@cornelisnetworks.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@cornelisnetworks.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/sdma.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c index 38258de75a94..33ff9eca28f6 100644 --- a/drivers/infiniband/hw/hfi1/sdma.c +++ b/drivers/infiniband/hw/hfi1/sdma.c @@ -1313,11 +1313,13 @@ void sdma_clean(struct hfi1_devdata *dd, size_t num_engines) kvfree(sde->tx_ring); sde->tx_ring = NULL; } - spin_lock_irq(&dd->sde_map_lock); - sdma_map_free(rcu_access_pointer(dd->sdma_map)); - RCU_INIT_POINTER(dd->sdma_map, NULL); - spin_unlock_irq(&dd->sde_map_lock); - synchronize_rcu(); + if (rcu_access_pointer(dd->sdma_map)) { + spin_lock_irq(&dd->sde_map_lock); + sdma_map_free(rcu_access_pointer(dd->sdma_map)); + RCU_INIT_POINTER(dd->sdma_map, NULL); + spin_unlock_irq(&dd->sde_map_lock); + synchronize_rcu(); + } kfree(dd->per_sdma); dd->per_sdma = NULL;

From: Yong Wu yong.wu@mediatek.com

[ Upstream commit ee55f75e4bcade81d253163641b63bef3e76cac4 ]

Lack the list_del in the mtk_iommu_remove, and remove bus_set_iommu(*, NULL) since there may be several iommu HWs. we can not bus_set_iommu null when one iommu driver unbind.

This could be a fix for mt2712 which support 2 M4U HW and list them.

Fixes: 7c3a2ec02806 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain") Signed-off-by: Yong Wu yong.wu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Matthias Brugger matthias.bgg@gmail.com Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/mtk_iommu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index 8e75f34ac886..7304ad88f126 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -702,8 +702,7 @@ static int mtk_iommu_remove(struct platform_device *pdev) iommu_device_sysfs_remove(&data->iommu); iommu_device_unregister(&data->iommu);

- if (iommu_present(&platform_bus_type)) - bus_set_iommu(&platform_bus_type, NULL); + list_del(&data->list);

clk_disable_unprepare(data->bclk); devm_free_irq(&pdev->dev, data->irq, data);

From: Nathan Chancellor nathan@kernel.org

[ Upstream commit 6977262c2eee111645668fe9e235ef2f5694abf7 ]

Clang warns:

drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (dev->use_dma) { ^~~~~~~~~~~~ drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret); ^~~~~~~

Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op when the first argument is NULL, which will work for the !dev->use_dma case.

Fixes: 03fbb903c8bf ("i2c: at91: use dma safe buffers") Link: https://github.com/ClangBuiltLinux/linux/issues/1629 Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Michael Walle michael@walle.cc Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-at91.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index d5119a2adf5d..29947eb905fb 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -757,7 +757,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) unsigned int_addr_flag = 0; struct i2c_msg *m_start = msg; bool is_read; - u8 *dma_buf; + u8 *dma_buf = NULL;

dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit b23789a59fa6f00e98a319291819f91fbba0deb8 ]

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/amba-clcd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index 38c1f324ce15..549f78e77255 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -838,12 +838,15 @@ static int clcdfb_of_vram_setup(struct clcd_fb *fb) return -ENODEV;

fb->fb.screen_base = of_iomap(memory, 0); - if (!fb->fb.screen_base) + if (!fb->fb.screen_base) { + of_node_put(memory); return -ENOMEM; + }

fb->fb.fix.smem_start = of_translate_address(memory, of_get_address(memory, 0, &size, NULL)); fb->fb.fix.smem_len = size; + of_node_put(memory);

return 0; }

From: Joerg Roedel jroedel@suse.de

[ Upstream commit 42bb5aa043382f09bef2cc33b8431be867c70f8e ]

On some systems it can take a long time for the hardware to enable the GA log of the AMD IOMMU. The current wait time is only 0.1ms, but testing showed that it can take up to 14ms for the GA log to enter running state after it has been enabled.

Sometimes the long delay happens when booting the system, sometimes only on resume. Adjust the timeout accordingly to not print a warning when hardware takes a longer than usual.

There has already been an attempt to fix this with commit

9b45a7738eec ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")

But that commit was based on some wrong math and did not fix the issue in all cases.

Cc: "D. Ziegfeld" dzigg@posteo.de Cc: Jörg-Volker Peetz jvpeetz@web.de Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel jroedel@suse.de Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 76ae6968801e..1c61cd0b1d55 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -90,7 +90,7 @@ #define ACPI_DEVFLAG_LINT1 0x80 #define ACPI_DEVFLAG_ATSDIS 0x10000000

-#define LOOP_TIMEOUT 100000 +#define LOOP_TIMEOUT 2000000 /* * ACPI table definitions *

From: Zhengjun Xing zhengjun.xing@linux.intel.com

[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]

In the origin code, when "ExtSel" is 1, the eventcode will change to "eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS", its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E, but in fact the eventcode should <=0x1FF, so this will cause the parse fail:

# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1 event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS' ___ value too big for format, maximum is 511

On the perf kernel side, the kernel assumes the valid bits are continuous. It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.

DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");

So the perf tool follows the kernel side and just set bit8 other than bit21.

Fixes: fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files") Reviewed-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Xing Zhengjun zhengjun.xing@linux.intel.com Acked-by: Ian Rogers irogers@google.com Cc: Adrian Hunter adrian.hunter@intel.com Cc: Alexander Shishkin alexander.shishkin@intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Ingo Molnar mingo@redhat.com Cc: Jiri Olsa jolsa@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/pmu-events/jevents.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index 31331c42b0e3..0f5a63026d21 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -563,7 +563,7 @@ int json_events(const char *fn, } else if (json_streq(map, field, "ExtSel")) { char *code = NULL; addfield(map, &code, "", "", val); - eventcode |= strtoul(code, NULL, 0) << 21; + eventcode |= strtoul(code, NULL, 0) << 8; free(code); } else if (json_streq(map, field, "EventName")) { addfield(map, &name, "", "", val);

From: Johannes Berg johannes.berg@intel.com

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point.

However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

Cc: stable@vger.kernel.org Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations") Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2a... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/chan.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -1638,12 +1638,9 @@ int ieee80211_vif_use_reserved_context(s

if (new_ctx->replace_state == IEEE80211_CHANCTX_REPLACE_NONE) { if (old_ctx) - err = ieee80211_vif_use_reserved_reassign(sdata); - else - err = ieee80211_vif_use_reserved_assign(sdata); + return ieee80211_vif_use_reserved_reassign(sdata);

- if (err) - return err; + return ieee80211_vif_use_reserved_assign(sdata); }

/*

From: Zhihao Cheng chengzhihao1@huawei.com

commit 68f4c6eba70df70a720188bce95c85570ddfcc87 upstream.

Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and writeback_inodes_wb()") has us holding a plug during wb_writeback, which may cause a potential ABBA dead lock:

wb_writeback fat_file_fsync blk_start_plug(&plug) for (;;) { iter i-1: some reqs have been added into plug->mq_list // LOCK A iter i: progress = __writeback_inodes_wb(wb, work) . writeback_sb_inodes // fat's bdev . __writeback_single_inode . . generic_writepages . . __block_write_full_page . . . . __generic_file_fsync . . . . sync_inode_metadata . . . . writeback_single_inode . . . . __writeback_single_inode . . . . fat_write_inode . . . . __fat_write_inode . . . . sync_dirty_buffer // fat's bdev . . . . lock_buffer(bh) // LOCK B . . . . submit_bh . . . . blk_mq_get_tag // LOCK A . . . trylock_buffer(bh) // LOCK B . . . redirty_page_for_writepage . . . wbc->pages_skipped++ . . --wbc->nr_to_write . wrote += write_chunk - wbc.nr_to_write // wrote > 0 . requeue_inode . redirty_tail_locked if (progress) // progress > 0 continue; iter i+1: queue_io // similar process with iter i, infinite for-loop ! } blk_finish_plug(&plug) // flush plug won't be called

Above process triggers a hungtask like: [ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds. [ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty [ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid: 2426 flags:0x00004000 [ 399.051556] Call Trace: [ 399.051570] __schedule+0x480/0x1050 [ 399.051592] schedule+0x92/0x1a0 [ 399.051602] io_schedule+0x22/0x50 [ 399.051613] blk_mq_get_tag+0x1d3/0x3c0 [ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0 [ 399.051657] blk_mq_submit_bio+0x68d/0xca0 [ 399.051674] __submit_bio+0x1b5/0x2d0 [ 399.051708] submit_bio_noacct+0x34e/0x720 [ 399.051718] submit_bio+0x3b/0x150 [ 399.051725] submit_bh_wbc+0x161/0x230 [ 399.051734] __sync_dirty_buffer+0xd1/0x420 [ 399.051744] sync_dirty_buffer+0x17/0x20 [ 399.051750] __fat_write_inode+0x289/0x310 [ 399.051766] fat_write_inode+0x2a/0xa0 [ 399.051783] __writeback_single_inode+0x53c/0x6f0 [ 399.051795] writeback_single_inode+0x145/0x200 [ 399.051803] sync_inode_metadata+0x45/0x70 [ 399.051856] __generic_file_fsync+0xa3/0x150 [ 399.051880] fat_file_fsync+0x1d/0x80 [ 399.051895] vfs_fsync_range+0x40/0xb0 [ 399.051929] __x64_sys_fsync+0x18/0x30

In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback: unplug before cond_resched in writeback_sb_inodes") in function 'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted from write_cache_pages().

Fix it by correcting wrote number according number of skipped pages in writeback_sb_inodes().

Goto Link to find a reproducer.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837 Cc: stable@vger.kernel.org # v4.3 Signed-off-by: Zhihao Cheng chengzhihao1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220510133805.1988292-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/fs-writeback.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -1568,11 +1568,12 @@ static long writeback_sb_inodes(struct s }; unsigned long start_time = jiffies; long write_chunk; - long wrote = 0; /* count both pages and inodes */ + long total_wrote = 0; /* count both pages and inodes */

while (!list_empty(&wb->b_io)) { struct inode *inode = wb_inode(wb->b_io.prev); struct bdi_writeback *tmp_wb; + long wrote;

if (inode->i_sb != sb) { if (work->sb) { @@ -1648,7 +1649,9 @@ static long writeback_sb_inodes(struct s

wbc_detach_inode(&wbc); work->nr_pages -= write_chunk - wbc.nr_to_write; - wrote += write_chunk - wbc.nr_to_write; + wrote = write_chunk - wbc.nr_to_write - wbc.pages_skipped; + wrote = wrote < 0 ? 0 : wrote; + total_wrote += wrote;

if (need_resched()) { /* @@ -1670,7 +1673,7 @@ static long writeback_sb_inodes(struct s tmp_wb = inode_to_wb_and_lock_list(inode); spin_lock(&inode->i_lock); if (!(inode->i_state & I_DIRTY_ALL)) - wrote++; + total_wrote++; requeue_inode(inode, tmp_wb, &wbc); inode_sync_complete(inode); spin_unlock(&inode->i_lock); @@ -1684,14 +1687,14 @@ static long writeback_sb_inodes(struct s * bail out to wb_writeback() often enough to check * background threshold and other termination conditions. */ - if (wrote) { + if (total_wrote) { if (time_is_before_jiffies(start_time + HZ / 10UL)) break; if (work->nr_pages <= 0) break; } } - return wrote; + return total_wrote; }

static long __writeback_inodes_wb(struct bdi_writeback *wb,

From: Ye Bin yebin10@huawei.com

commit 0be698ecbe4471fcad80e81ec6a05001421041b3 upstream.

We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895

CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected

Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872

Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'.

[ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ]

Signed-off-by: Ye Bin yebin10@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20220414025223.4113128-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/namei.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)

--- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3333,6 +3333,9 @@ static struct buffer_head *ext4_get_firs struct buffer_head *bh;

if (!ext4_has_inline_data(inode)) { + struct ext4_dir_entry_2 *de; + unsigned int offset; + /* The first directory block must not be a hole, so * treat it as DIRENT_HTREE */ @@ -3341,9 +3344,30 @@ static struct buffer_head *ext4_get_firs *retval = PTR_ERR(bh); return NULL; } - *parent_de = ext4_next_entry( - (struct ext4_dir_entry_2 *)bh->b_data, - inode->i_sb->s_blocksize); + + de = (struct ext4_dir_entry_2 *) bh->b_data; + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, + bh->b_size, 0) || + le32_to_cpu(de->inode) != inode->i_ino || + strcmp(".", de->name)) { + EXT4_ERROR_INODE(inode, "directory missing '.'"); + brelse(bh); + *retval = -EFSCORRUPTED; + return NULL; + } + offset = ext4_rec_len_from_disk(de->rec_len, + inode->i_sb->s_blocksize); + de = ext4_next_entry(de, inode->i_sb->s_blocksize); + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, + bh->b_size, offset) || + le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) { + EXT4_ERROR_INODE(inode, "directory missing '..'"); + brelse(bh); + *retval = -EFSCORRUPTED; + return NULL; + } + *parent_de = de; + return bh; }

From: Jan Kara jack@suse.cz

commit 46c116b920ebec58031f0a78c5ea9599b0d2a371 upstream.

Before splitting a directory block verify its directory entries are sane so that the splitting code does not access memory it should not.

Cc: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20220518093332.13986-1-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/namei.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-)

--- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -272,9 +272,9 @@ static struct dx_frame *dx_probe(struct struct dx_hash_info *hinfo, struct dx_frame *frame); static void dx_release(struct dx_frame *frames); -static int dx_make_map(struct inode *dir, struct ext4_dir_entry_2 *de, - unsigned blocksize, struct dx_hash_info *hinfo, - struct dx_map_entry map[]); +static int dx_make_map(struct inode *dir, struct buffer_head *bh, + struct dx_hash_info *hinfo, + struct dx_map_entry *map_tail); static void dx_sort_map(struct dx_map_entry *map, unsigned count); static struct ext4_dir_entry_2 *dx_move_dirents(char *from, char *to, struct dx_map_entry *offsets, int count, unsigned blocksize); @@ -1203,15 +1203,23 @@ static inline int search_dirblock(struct * Create map of hash values, offsets, and sizes, stored at end of block. * Returns number of entries mapped. */ -static int dx_make_map(struct inode *dir, struct ext4_dir_entry_2 *de, - unsigned blocksize, struct dx_hash_info *hinfo, +static int dx_make_map(struct inode *dir, struct buffer_head *bh, + struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) { int count = 0; - char *base = (char *) de; + struct ext4_dir_entry_2 *de = (struct ext4_dir_entry_2 *)bh->b_data; + unsigned int buflen = bh->b_size; + char *base = bh->b_data; struct dx_hash_info h = *hinfo;

- while ((char *) de < base + blocksize) { + if (ext4_has_metadata_csum(dir->i_sb)) + buflen -= sizeof(struct ext4_dir_entry_tail); + + while ((char *) de < base + buflen) { + if (ext4_check_dir_entry(dir, NULL, de, bh, base, buflen, + ((char *)de) - base)) + return -EFSCORRUPTED; if (de->name_len && de->inode) { ext4fs_dirhash(de->name, de->name_len, &h); map_tail--; @@ -1221,8 +1229,7 @@ static int dx_make_map(struct inode *dir count++; cond_resched(); } - /* XXX: do we need to check rec_len == 0 case? -Chris */ - de = ext4_next_entry(de, blocksize); + de = ext4_next_entry(de, dir->i_sb->s_blocksize); } return count; } @@ -1756,8 +1763,11 @@ static struct ext4_dir_entry_2 *do_split

/* create map in the end of data2 block */ map = (struct dx_map_entry *) (data2 + blocksize); - count = dx_make_map(dir, (struct ext4_dir_entry_2 *) data1, - blocksize, hinfo, map); + count = dx_make_map(dir, *bh, hinfo, map); + if (count < 0) { + err = count; + goto journal_error; + } map -= count; dx_sort_map(map, count); /* Ensure that neither split block is over half full */

From: Keita Suzuki keitasuzuki.park@sslab.ics.keio.ac.jp

commit 99696a2592bca641eb88cc9a80c90e591afebd0f upstream.

In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function.

Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref().

Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ic...

Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers") CC: stable@vger.kernel.org Reviewed-by: Masami Hiramatsu mhiramat@kernel.org Reviewed-by: Tom Zanussi zanussi@kernel.org Signed-off-by: Keita Suzuki keitasuzuki.park@sslab.ics.keio.ac.jp Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/trace_events_hist.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -2456,8 +2456,11 @@ static int init_var_ref(struct hist_fiel return err; free: kfree(ref_field->system); + ref_field->system = NULL; kfree(ref_field->event_name); + ref_field->event_name = NULL; kfree(ref_field->name); + ref_field->name = NULL;

goto out; }

From: Johan Hovold johan+linaro@kernel.org

commit 87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream.

Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral.

Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold johan+linaro@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Acked-by: Stanimir Varbanov svarbanov@mm-sol.com Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/dwc/pcie-qcom.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1331,17 +1331,14 @@ static int qcom_pcie_probe(struct platfo }

ret = phy_init(pcie->phy); - if (ret) { - pm_runtime_disable(&pdev->dev); + if (ret) goto err_pm_runtime_put; - }

platform_set_drvdata(pdev, pcie);

ret = dw_pcie_host_init(pp); if (ret) { dev_err(dev, "cannot initialize host\n"); - pm_runtime_disable(&pdev->dev); goto err_pm_runtime_put; }

From: Alexander Aring aahringo@redhat.com

commit 42252d0d2aa9b94d168241710a761588b3959019 upstream.

This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields.

To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set.

Example of the KASAN output which showed the invalid read:

[ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 [dlm] [ 2064.399932] process_recv_sockets+0x32/0x40 [dlm] [ 2064.402180] process_one_work+0x9a8/0x16e0 [ 2064.404388] worker_thread+0x87/0xbf0 [ 2064.406124] kthread+0x3ac/0x490 [ 2064.408021] ret_from_fork+0x22/0x30 [ 2064.409834] [ 2064.410599] The buggy address belongs to the object at ffff88800ef22780 [ 2064.410599] which belongs to the cache kmalloc-96 of size 96 [ 2064.416495] The buggy address is located 88 bytes inside of [ 2064.416495] 96-byte region [ffff88800ef22780, ffff88800ef227e0) [ 2064.422045] The buggy address belongs to the page: [ 2064.424635] page:00000000b6bef8bc refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xef22 [ 2064.428970] flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff) [ 2064.432515] raw: 000fffffc0000200 ffffea0000d68b80 0000001400000014 ffff888001041780 [ 2064.436110] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 2064.439813] page dumped because: kasan: bad access detected [ 2064.442548] [ 2064.443310] Memory state around the buggy address: [ 2064.445988] ffff88800ef22680: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 2064.449444] ffff88800ef22700: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 2064.452941] >ffff88800ef22780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc [ 2064.456383] ^ [ 2064.459386] ffff88800ef22800: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc [ 2064.462788] ffff88800ef22880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 2064.466239] ==================================================================

reproducer in python:

import argparse import struct import fcntl import os

parser = argparse.ArgumentParser()

parser.add_argument('-f', '--file', help='file to use fcntl, must be on dlm lock filesystem e.g. gfs2')

args = parser.parse_args()

f = open(args.file, 'wb+')

lockdata = struct.pack('hhllhh', fcntl.F_WRLCK,0,0,0,0,0) fcntl.fcntl(f, fcntl.F_SETLK, lockdata) lockdata = struct.pack('hhllhh', fcntl.F_UNLCK,0,0,0,0,0) fcntl.fcntl(f, fcntl.F_SETLK, lockdata)

Fixes: 586759f03e2e ("gfs2: nfs lock support for gfs2") Cc: stable@vger.kernel.org Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Alexander Aring aahringo@redhat.com Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/dlm/plock.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -26,11 +26,11 @@ struct plock_op { struct list_head list; int done; struct dlm_plock_info info; + int (*callback)(struct file_lock *fl, int result); };

struct plock_xop { struct plock_op xop; - int (*callback)(struct file_lock *fl, int result); void *fl; void *file; struct file_lock flc; @@ -132,19 +132,18 @@ int dlm_posix_lock(dlm_lockspace_t *lock /* fl_owner is lockd which doesn't distinguish processes on the nfs client */ op->info.owner = (__u64) fl->fl_pid; - xop->callback = fl->fl_lmops->lm_grant; + op->callback = fl->fl_lmops->lm_grant; locks_init_lock(&xop->flc); locks_copy_lock(&xop->flc, fl); xop->fl = fl; xop->file = file; } else { op->info.owner = (__u64)(long) fl->fl_owner; - xop->callback = NULL; }

send_op(op);

- if (xop->callback == NULL) { + if (!op->callback) { rv = wait_event_interruptible(recv_wq, (op->done != 0)); if (rv == -ERESTARTSYS) { log_debug(ls, "dlm_posix_lock: wait killed %llx", @@ -206,7 +205,7 @@ static int dlm_plock_callback(struct plo file = xop->file; flc = &xop->flc; fl = xop->fl; - notify = xop->callback; + notify = op->callback;

if (op->info.rv) { notify(fl, op->info.rv); @@ -439,10 +438,9 @@ static ssize_t dev_write(struct file *fi if (op->info.fsid == info.fsid && op->info.number == info.number && op->info.owner == info.owner) { - struct plock_xop *xop = (struct plock_xop *)op; list_del_init(&op->list); memcpy(&op->info, &info, sizeof(info)); - if (xop->callback) + if (op->callback) do_callback = 1; else op->done = 1;

From: Junxiao Bi via Ocfs2-devel ocfs2-devel@oss.oracle.com

commit 863e0d81b6683c4cbc588ad831f560c90e494bef upstream.

When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail.

For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this.

[ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 0000000000000003 ffff880174d48040 ffff88017f7cbd18 ffffffffc07d455f [ 989.765442] ffff88017f7cbd88 ffffffff816fb639 ffff88017f7cbd38 ffff8800361b5600 [ 989.765717] ffff88021db7a000 ffff88021f429380 0000000000000003 ffffffffc0453020 [ 989.765991] Call Trace: [ 989.766093] [<ffffffffc07d455f>] user_bast+0x5f/0xf0 [ocfs2_dlmfs] [ 989.766287] [<ffffffff816fb639>] ? schedule_timeout+0x169/0x2d0 [ 989.766475] [<ffffffffc0453020>] ? o2dlm_lock_ast_wrapper+0x20/0x20 [ocfs2_stack_o2cb] [ 989.766738] [<ffffffffc045303a>] o2dlm_blocking_ast_wrapper+0x1a/0x20 [ocfs2_stack_o2cb] [ 989.767010] [<ffffffffc0864ec6>] dlm_do_local_bast+0x46/0xe0 [ocfs2_dlm] [ 989.767217] [<ffffffffc084f5cc>] ? dlm_lockres_calc_usage+0x4c/0x60 [ocfs2_dlm] [ 989.767466] [<ffffffffc08501f1>] dlm_thread+0xa31/0x1140 [ocfs2_dlm] [ 989.767662] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.767834] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768006] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768178] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768349] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768521] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768693] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768893] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.769067] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769241] [<ffffffff810ce4d0>] ? wait_woken+0x90/0x90 [ 989.769411] [<ffffffffc084f7c0>] ? dlm_kick_thread+0x80/0x80 [ocfs2_dlm] [ 989.769617] [<ffffffff810a8bbb>] kthread+0xcb/0xf0 [ 989.769774] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769945] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.770117] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770321] [<ffffffff816fdaa1>] ret_from_fork+0x61/0x90 [ 989.770492] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770689] Code: d0 00 00 00 f0 45 7d c0 bf 00 20 00 00 48 89 83 c0 00 00 00 48 89 83 c8 00 00 00 e8 55 c1 8c c0 83 4b 04 10 48 83 c4 08 5b 5d c3 <0f> 0b 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 83 [ 989.771892] RIP [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.772174] RSP <ffff88017f7cbcb8> [ 989.772704] ---[ end trace ebd1e38cebcc93a8 ]--- [ 989.772907] Kernel panic - not syncing: Fatal exception [ 989.773173] Kernel Offset: disabled

Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi junxiao.bi@oracle.com Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Joseph Qi jiangqi903@gmail.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ocfs2/dlmfs/userdlm.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/fs/ocfs2/dlmfs/userdlm.c +++ b/fs/ocfs2/dlmfs/userdlm.c @@ -449,6 +449,11 @@ again: }

spin_lock(&lockres->l_lock); + if (lockres->l_flags & USER_LOCK_IN_TEARDOWN) { + spin_unlock(&lockres->l_lock); + status = -EAGAIN; + goto bail; + }

/* We only compare against the currently granted level * here. If the lock is blocked waiting on a downconvert, @@ -615,7 +620,7 @@ int user_dlm_destroy_lock(struct user_lo spin_lock(&lockres->l_lock); if (lockres->l_flags & USER_LOCK_IN_TEARDOWN) { spin_unlock(&lockres->l_lock); - return 0; + goto bail; }

lockres->l_flags |= USER_LOCK_IN_TEARDOWN; @@ -629,12 +634,17 @@ int user_dlm_destroy_lock(struct user_lo }

if (lockres->l_ro_holders || lockres->l_ex_holders) { + lockres->l_flags &= ~USER_LOCK_IN_TEARDOWN; spin_unlock(&lockres->l_lock); goto bail; }

status = 0; if (!(lockres->l_flags & USER_LOCK_ATTACHED)) { + /* + * lock is never requested, leave USER_LOCK_IN_TEARDOWN set + * to avoid new lock request coming in. + */ spin_unlock(&lockres->l_lock); goto bail; } @@ -645,6 +655,10 @@ int user_dlm_destroy_lock(struct user_lo

status = ocfs2_dlm_unlock(conn, &lockres->l_lksb, DLM_LKF_VALBLK); if (status) { + spin_lock(&lockres->l_lock); + lockres->l_flags &= ~USER_LOCK_IN_TEARDOWN; + lockres->l_flags &= ~USER_LOCK_BUSY; + spin_unlock(&lockres->l_lock); user_log_dlm_error("ocfs2_dlm_unlock", status, lockres); goto bail; }

From: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org

commit 8eecddfca30e1651dc1c74531ed5eef21dcce7e3 upstream.

In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be stable for at least 1us. Even though there is wmb() to make sure the write gets "completed", there is no guarantee that the write actually reached the UFS device. There is a good chance that the write could be stored in a Write Buffer (WB). In that case, even though the CPU waits for 1us, the ref_clk might not be stable for that period.

So lets do a readl() to make sure that the previous write has reached the UFS device before udelay().

Also, the wmb() after writel_relaxed() is not really needed. Both writel() and readl() are ordered on all architectures and the CPU won't speculate instructions after readl() due to the in-built control dependency with read value on weakly ordered architectures. So it can be safely removed.

Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linar... Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/ufs/ufs-qcom.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -910,8 +910,11 @@ static void ufs_qcom_dev_ref_clk_ctrl(st

writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);

- /* ensure that ref_clk is enabled/disabled before we return */ - wmb(); + /* + * Make sure the write to ref_clk reaches the destination and + * not stored in a Write Buffer (WB). + */ + readl(host->dev_ref_clk_ctrl_mmio);

/* * If we call hibern8 exit after this, we need to make sure that

From: Xiaomeng Tong xiam0nd.tong@gmail.com

commit 1c3b2a27def609473ed13b1cd668cb10deab49b4 upstream.

The bug is here: if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp)) return cstate;

The list iterator value 'cstate' will *always* be set and non-NULL by list_for_each_entry_from_reverse(), so it is incorrect to assume that the iterator value will be unchanged if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid structure object containing the HEAD). Also it missed a NULL check at callsite and may lead to invalid memory access after that.

To fix this bug, just return 'encoder' when found, otherwise return NULL. And add the NULL check.

Cc: stable@vger.kernel.org Fixes: 1f7f3d91ad38a ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog") Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Reviewed-by: Lyude Paul lyude@redhat.com Signed-off-by: Lyude Paul lyude@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/nouveau/nvkm/subdev/clk/base.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/base.c @@ -134,10 +134,10 @@ nvkm_cstate_find_best(struct nvkm_clk *c

list_for_each_entry_from_reverse(cstate, &pstate->list, head) { if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp)) - break; + return cstate; }

- return cstate; + return NULL; }

static struct nvkm_cstate * @@ -168,6 +168,8 @@ nvkm_cstate_prog(struct nvkm_clk *clk, s if (!list_empty(&pstate->list)) { cstate = nvkm_cstate_get(clk, pstate, cstatei); cstate = nvkm_cstate_find_best(clk, pstate, cstate); + if (!cstate) + return -EINVAL; } else { cstate = &pstate->base; }