In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com --- Changes in v2: - simplify bcm2835_pll_off() --- drivers/clk/bcm/clk-bcm2835.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index a07f6451694a..fa0d5c8611a0 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -602,9 +602,7 @@ static void bcm2835_pll_off(struct clk_hw *hw) const struct bcm2835_pll_data *data = pll->data;

spin_lock(&cprman->regs_lock); - cprman_write(cprman, data->cm_ctrl_reg, - cprman_read(cprman, data->cm_ctrl_reg) | - CM_PLL_ANARST); + cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST); cprman_write(cprman, data->a2w_ctrl_reg, cprman_read(cprman, data->a2w_ctrl_reg) | A2W_PLL_CTRL_PWRDN); @@ -640,6 +638,10 @@ static int bcm2835_pll_on(struct clk_hw *hw) cpu_relax(); }

+ cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) | + A2W_PLL_CTRL_PRST_DISABLE); + return 0; }