[PATCH AUTOSEL 4.19 1/4] usb: misc: uss720: check for incompatible versions of the Belkin F5U002
From: Alex Henrie alexhenrie24@gmail.com
[ Upstream commit 3295f1b866bfbcabd625511968e8a5c541f9ab32 ]
The incompatible device in my possession has a sticker that says "F5U002 Rev 2" and "P80453-B", and lsusb identifies it as "050d:0002 Belkin Components IEEE-1284 Controller". There is a bug report from 2007 from Michael Trausch who was seeing the exact same errors that I saw in 2024 trying to use this cable.
Link: https://lore.kernel.org/all/46DE5830.9060401@trausch.us/ Signed-off-by: Alex Henrie alexhenrie24@gmail.com Link: https://lore.kernel.org/r/20240326150723.99939-5-alexhenrie24@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/misc/uss720.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0be8efcda15d5..d972c09629397 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -677,7 +677,7 @@ static int uss720_probe(struct usb_interface *intf, struct parport_uss720_private *priv; struct parport *pp; unsigned char reg; - int i; + int ret;
dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n", le16_to_cpu(usbdev->descriptor.idVendor), @@ -688,8 +688,8 @@ static int uss720_probe(struct usb_interface *intf, usb_put_dev(usbdev); return -ENODEV; } - i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); - dev_dbg(&intf->dev, "set interface result %d\n", i); + ret = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); + dev_dbg(&intf->dev, "set interface result %d\n", ret);
interface = intf->cur_altsetting;
@@ -725,12 +725,18 @@ static int uss720_probe(struct usb_interface *intf, set_1284_register(pp, 7, 0x00, GFP_KERNEL); set_1284_register(pp, 6, 0x30, GFP_KERNEL); /* PS/2 mode */ set_1284_register(pp, 2, 0x0c, GFP_KERNEL); - /* debugging */ - get_1284_register(pp, 0, ®, GFP_KERNEL); + + /* The Belkin F5U002 Rev 2 P80453-B USB parallel port adapter shares the + * device ID 050d:0002 with some other device that works with this + * driver, but it itself does not. Detect and handle the bad cable + * here. */ + ret = get_1284_register(pp, 0, ®, GFP_KERNEL); dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg); + if (ret < 0) + return ret;
- i = usb_find_last_int_in_endpoint(interface, &epd); - if (!i) { + ret = usb_find_last_int_in_endpoint(interface, &epd); + if (!ret) { dev_dbg(&intf->dev, "epaddr %d interval %d\n", epd->bEndpointAddress, epd->bInterval); }
From: Roman Smirnov r.smirnov@omp.ru
[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]
An overflow can occur in a situation where src.centiseconds takes the value of 255. This situation is unlikely, but there is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara jack@suse.cz Signed-off-by: Roman Smirnov r.smirnov@omp.ru Reviewed-by: Sergey Shtylyov s.shtylyov@omp.ru Signed-off-by: Jan Kara jack@suse.cz Message-Id: 20240327132755.13945-1-r.smirnov@omp.ru Signed-off-by: Sasha Levin sashal@kernel.org --- fs/udf/udftime.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c index fce4ad976c8c2..26169b1f482c3 100644 --- a/fs/udf/udftime.c +++ b/fs/udf/udftime.c @@ -60,13 +60,18 @@ udf_disk_stamp_to_time(struct timespec64 *dest, struct timestamp src) dest->tv_sec = mktime64(year, src.month, src.day, src.hour, src.minute, src.second); dest->tv_sec -= offset * 60; - dest->tv_nsec = 1000 * (src.centiseconds * 10000 + - src.hundredsOfMicroseconds * 100 + src.microseconds); + /* * Sanitize nanosecond field since reportedly some filesystems are * recorded with bogus sub-second values. */ - dest->tv_nsec %= NSEC_PER_SEC; + if (src.centiseconds < 100 && src.hundredsOfMicroseconds < 100 && + src.microseconds < 100) { + dest->tv_nsec = 1000 * (src.centiseconds * 10000 + + src.hundredsOfMicroseconds * 100 + src.microseconds); + } else { + dest->tv_nsec = 0; + } }
void
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails with the following sequence:
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529) radeon 0000:01:00.0: not ready 1023ms after resume; waiting radeon 0000:01:00.0: not ready 2047ms after resume; waiting radeon 0000:01:00.0: not ready 4095ms after resume; waiting radeon 0000:01:00.0: not ready 8191ms after resume; waiting radeon 0000:01:00.0: not ready 16383ms after resume; waiting radeon 0000:01:00.0: not ready 32767ms after resume; waiting radeon 0000:01:00.0: not ready 65535ms after resume; giving up radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
The issue is that the Root Port the dGPU is connected to can't handle the transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
The existing logic in pci_bridge_d3_possible() checks for systems that are newer than 2015 to decide that D3 is safe. This would nominally work for an Ivy Bridge system (which was discontinued in 2015), but this system appears to have continued to receive BIOS updates until 2017 and so this existing logic doesn't appropriately capture it.
Add the system to bridge_d3_blacklist to prevent D3cold from being used.
Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com Reported-by: Eric Heintzmann heintzmann.eric@free.fr Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229 Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Tested-by: Eric Heintzmann heintzmann.eric@free.fr Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 2ac400adaee11..4f229cb5d2a9f 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2530,6 +2530,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = { DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"), }, }, + { + /* + * Changing power state of root port dGPU is connected fails + * https://gitlab.freedesktop.org/drm/amd/-/issues/3229 + */ + .ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "1972"), + DMI_MATCH(DMI_BOARD_VERSION, "95.33"), + }, + }, #endif { } };
From: Songyang Li leesongyang@outlook.com
[ Upstream commit 29b83a64df3b42c88c0338696feb6fdcd7f1f3b7 ]
The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic.
Signed-off-by: Songyang Li leesongyang@outlook.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/pci/pcie-octeon.c | 6 ++++++ 1 file changed, 6 insertions(+) mode change 100644 => 100755 arch/mips/pci/pcie-octeon.c
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c old mode 100644 new mode 100755 index d919a0d813a17..38de2a9c3cf1a --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -230,12 +230,18 @@ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, { union cvmx_pcie_address pcie_addr; union cvmx_pciercx_cfg006 pciercx_cfg006; + union cvmx_pciercx_cfg032 pciercx_cfg032;
pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) return 0;
+ pciercx_cfg032.u32 = + cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); + if ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1)) + return 0; + pcie_addr.u64 = 0; pcie_addr.config.upper = 2; pcie_addr.config.io = 1;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin