From: Joakim Tjernlund Joakim.Tjernlund@infinera.com
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com --- drivers/bluetooth/btrtl.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index e7fe5fb22753..ccef8b2cfee2 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = { .cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */ - { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB), + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART), .config_needed = false, .has_rom_version = true, .fw_name = "rtl_bt/rtl8761b_fw.bin", .cfg_name = "rtl_bt/rtl8761b_config" },
+ /* 8761BU */ + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .fw_name = "rtl_bt/rtl8761bu_fw.bin", + .cfg_name = "rtl_bt/rtl8761bu_config" }, + /* 8822C with UART interface */ { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART), .config_needed = true,
From: Joakim Tjernlund Joakim.Tjernlund@infinera.com
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=190e Rev= 2.00 S: Manufacturer=Realtek S: Product=ASUS USB-BT500 S: SerialNumber=xxxxxxxx C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com --- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5d603ef39bad..628f4b22cf69 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
+ /* Additional Realtek 8761BU Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
On Fri, May 28, 2021 at 05:26:45PM +0200, Joakim Tjernlund wrote:
From: Joakim Tjernlund Joakim.Tjernlund@infinera.com
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=190e Rev= 2.00 S: Manufacturer=Realtek S: Product=ASUS USB-BT500 S: SerialNumber=xxxxxxxx C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com
drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5d603ef39bad..628f4b22cf69 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
- /* Additional Realtek 8761BU Bluetooth devices */
- { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },- /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
-- 2.31.1
<formletter>
This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly.
</formletter>
Hi Joakim,
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=190e Rev= 2.00 S: Manufacturer=Realtek S: Product=ASUS USB-BT500 S: SerialNumber=xxxxxxxx C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com
drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5d603ef39bad..628f4b22cf69 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
- /* Additional Realtek 8761BU Bluetooth devices */
- { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
Applying: Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device. .git/rebase-apply/patch:15: space before tab in indent. BTUSB_WIDEBAND_SPEECH }, warning: 1 line adds whitespace errors.
Regards
Marcel
On Fri, May 28, 2021 at 05:26:44PM +0200, Joakim Tjernlund wrote:
From: Joakim Tjernlund Joakim.Tjernlund@infinera.com
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com
drivers/bluetooth/btrtl.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index e7fe5fb22753..ccef8b2cfee2 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = { .cfg_name = "rtl_bt/rtl8761a_config" }, /* 8761B */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART), .config_needed = false, .has_rom_version = true, .fw_name = "rtl_bt/rtl8761b_fw.bin", .cfg_name = "rtl_bt/rtl8761b_config" },
- /* 8761BU */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
.config_needed = false,.has_rom_version = true,.fw_name = "rtl_bt/rtl8761bu_fw.bin",.cfg_name = "rtl_bt/rtl8761bu_config" },- /* 8822C with UART interface */ { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART), .config_needed = true,
-- 2.31.1
<formletter>
This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly.
</formletter>
Hi Joakim,
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com
drivers/bluetooth/btrtl.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
linux-stable-mirror@lists.linaro.org
-
Greg KH -
Joakim Tjernlund -
Marcel Holtmann