The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 29b32839725f8c89a41cb6ee054c85f3116ea8b5 Mon Sep 17 00:00:00 2001

From: Nadav Amit namit@vmware.com Date: Wed, 27 Jan 2021 09:53:17 -0800 Subject: [PATCH] iommu/vt-d: Do not use flush-queue when caching-mode is on

When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on.

Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.")

This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one.

Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability.

Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization.

Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit namit@vmware.com Cc: David Woodhouse dwmw2@infradead.org Cc: Lu Baolu baolu.lu@linux.intel.com Cc: Joerg Roedel joro@8bytes.org Cc: Will Deacon will@kernel.org Cc: stable@vger.kernel.org

Acked-by: Lu Baolu baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel jroedel@suse.de

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index f665322a0991..06b00b5363d8 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -5440,6 +5440,36 @@ intel_iommu_domain_set_attr(struct iommu_domain *domain, return ret; }

+static bool domain_use_flush_queue(void) +{ + struct dmar_drhd_unit *drhd; + struct intel_iommu *iommu; + bool r = true; + + if (intel_iommu_strict) + return false; + + /* + * The flush queue implementation does not perform page-selective + * invalidations that are required for efficient TLB flushes in virtual + * environments. The benefit of batching is likely to be much lower than + * the overhead of synchronizing the virtual and physical IOMMU + * page-tables. + */ + rcu_read_lock(); + for_each_active_iommu(iommu, drhd) { + if (!cap_caching_mode(iommu->cap)) + continue; + + pr_warn_once("IOMMU batching is disabled due to virtualization"); + r = false; + break; + } + rcu_read_unlock(); + + return r; +} + static int intel_iommu_domain_get_attr(struct iommu_domain *domain, enum iommu_attr attr, void *data) @@ -5450,7 +5480,7 @@ intel_iommu_domain_get_attr(struct iommu_domain *domain, case IOMMU_DOMAIN_DMA: switch (attr) { case DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE: - *(int *)data = !intel_iommu_strict; + *(int *)data = domain_use_flush_queue(); return 0; default: return -ENODEV;