From: Vlad Buslov vladbu@nvidia.com

[ Upstream commit 2105f700b53c24aa48b65c15652acc386044d26a ]

A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to match the L2 ethertype following the first VLAN header, as confirmed by linked discussion with the maintainer. However, such rule also matches packets that have additional second VLAN header, even though filter has both eth_type and vlan_ethtype set to "ipv4". Looking at the code this seems to be mostly an artifact of the way flower uses flow dissector. First, even though looking at the uAPI eth_type and vlan_ethtype appear like a distinct fields, in flower they are all mapped to the same key->basic.n_proto. Second, flow dissector skips following VLAN header as no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the value of n_proto to last parsed header. With these, such filters ignore any headers present between first VLAN header and first "non magic" header (ipv4 in this case) that doesn't result FLOW_DISSECT_RET_PROTO_AGAIN.

Fix the issue by extending flow dissector VLAN key structure with new 'vlan_eth_type' field that matches first ethertype following previously parsed VLAN header. Modify flower classifier to set the new flow_dissector_key_vlan->vlan_eth_type with value obtained from TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs.

Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/ Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support") Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers") Signed-off-by: Vlad Buslov vladbu@nvidia.com Reviewed-by: Jiri Pirko jiri@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/flow_dissector.h | 2 ++ net/core/flow_dissector.c | 1 + net/sched/cls_flower.c | 18 +++++++++++++----- 3 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/include/net/flow_dissector.h b/include/net/flow_dissector.h index 99f8580344d0..01229084b3ed 100644 --- a/include/net/flow_dissector.h +++ b/include/net/flow_dissector.h @@ -50,6 +50,8 @@ struct flow_dissector_key_vlan { u16 vlan_id:12, vlan_priority:3; __be16 vlan_tpid; + __be16 vlan_eth_type; + u16 padding; };

struct flow_dissector_key_mpls { diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 949694c70cbc..da860a680256 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -827,6 +827,7 @@ bool __skb_flow_dissect(const struct sk_buff *skb, VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; } key_vlan->vlan_tpid = saved_vlan_tpid; + key_vlan->vlan_eth_type = proto; }

fdret = FLOW_DISSECT_RET_PROTO_AGAIN; diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index 208436eb107c..6163648145c1 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -554,6 +554,7 @@ static int fl_set_key_mpls(struct nlattr **tb, static void fl_set_key_vlan(struct nlattr **tb, __be16 ethertype, int vlan_id_key, int vlan_prio_key, + int vlan_next_eth_type_key, struct flow_dissector_key_vlan *key_val, struct flow_dissector_key_vlan *key_mask) { @@ -572,6 +573,11 @@ static void fl_set_key_vlan(struct nlattr **tb, } key_val->vlan_tpid = ethertype; key_mask->vlan_tpid = cpu_to_be16(~0); + if (tb[vlan_next_eth_type_key]) { + key_val->vlan_eth_type = + nla_get_be16(tb[vlan_next_eth_type_key]); + key_mask->vlan_eth_type = cpu_to_be16(~0); + } }

static void fl_set_key_flag(u32 flower_key, u32 flower_mask, @@ -801,8 +807,9 @@ static int fl_set_key(struct net *net, struct nlattr **tb,

if (eth_type_vlan(ethertype)) { fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID, - TCA_FLOWER_KEY_VLAN_PRIO, &key->vlan, - &mask->vlan); + TCA_FLOWER_KEY_VLAN_PRIO, + TCA_FLOWER_KEY_VLAN_ETH_TYPE, + &key->vlan, &mask->vlan);

if (tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]) { ethertype = nla_get_be16(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]); @@ -810,6 +817,7 @@ static int fl_set_key(struct net *net, struct nlattr **tb, fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_CVLAN_ID, TCA_FLOWER_KEY_CVLAN_PRIO, + TCA_FLOWER_KEY_CVLAN_ETH_TYPE, &key->cvlan, &mask->cvlan); fl_set_key_val(tb, &key->basic.n_proto, TCA_FLOWER_KEY_CVLAN_ETH_TYPE, @@ -1717,13 +1725,13 @@ static int fl_dump_key(struct sk_buff *skb, struct net *net, goto nla_put_failure;

if (mask->basic.n_proto) { - if (mask->cvlan.vlan_tpid) { + if (mask->cvlan.vlan_eth_type) { if (nla_put_be16(skb, TCA_FLOWER_KEY_CVLAN_ETH_TYPE, key->basic.n_proto)) goto nla_put_failure; - } else if (mask->vlan.vlan_tpid) { + } else if (mask->vlan.vlan_eth_type) { if (nla_put_be16(skb, TCA_FLOWER_KEY_VLAN_ETH_TYPE, - key->basic.n_proto)) + key->vlan.vlan_eth_type)) goto nla_put_failure; } }

From: Linus Torvalds torvalds@linux-foundation.org

[ Upstream commit 213d266ebfb1621aab79cfe63388facc520a1381 ]

When compiling with -Wformat, clang emits the following warning:

gpiolib-acpi.c:393:4: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat] pin); ^~~

So warning that '%hhX' is paired with an 'int' is all just completely mindless and wrong. Sadly, I can see a different bogus warning reason why people would want to use '%02hhX'.

Again, the *sane* thing from a human perspective is to use '%02X. But if the compiler doesn't do any range analysis at all, it could decide that "Oh, that print format could need up to 8 bytes of space in the result". Using '%02hhX' would cut that down to two.

And since we use

char ev_name[5];

and currently use "_%c%02hhX" as the format string, even a compiler that doesn't notice that "pin <= 255" test that guards this all will go "OK, that's at most 4 bytes and the final NUL termination, so it's fine".

While a compiler - like gcc - that only sees that the original source of the 'pin' value is a 'unsigned short' array, and then doesn't take the "pin <= 255" into account, will warn like this:

gpiolib-acpi.c: In function 'acpi_gpiochip_request_interrupt': gpiolib-acpi.c:206:24: warning: '%02X' directive writing between 2 and 4 bytes into a region of size 3 [-Wformat-overflow=] sprintf(ev_name, "_%c%02X", ^~~~ gpiolib-acpi.c:206:20: note: directive argument in the range [0, 65535]

because gcc isn't being very good at that argument range analysis either.

In other words, the original use of 'hhx' was bogus to begin with, and due to *another* compiler warning being bad, and we had that bad code being written back in 2016 to work around _that_ compiler warning (commit e40a3ae1f794: "gpio: acpi: work around false-positive -Wstring-overflow warning").

Sadly, two different bad compiler warnings together does not make for one good one.

It just makes for even more pain.

End result: I think the simplest and cleanest option is simply the proposed change which undoes that '%hhX' change for gcc, and replaces it with just using a slightly bigger stack allocation. It's not like a 5-byte allocation is in any way likely to have saved any actual stack, since all the other variables in that function are 'int' or bigger.

False-positive compiler warnings really do make people write worse code, and that's a problem. But on a scale of bad code, I feel that extending the buffer trivially is better than adding a pointless cast that literally makes no sense.

At least in this case the end result isn't unreadable or buggy. We've had several cases of bad compiler warnings that caused changes that were actually horrendously wrong.

Fixes: e40a3ae1f794 ("gpio: acpi: work around false-positive -Wstring-overflow warning") Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 47cdc1f89e3f..6afe833031e3 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -278,8 +278,8 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, pin = agpio->pin_table[0];

if (pin <= 255) { - char ev_name[5]; - sprintf(ev_name, "_%c%02hhX", + char ev_name[8]; + sprintf(ev_name, "_%c%02X", agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L', pin); if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))

From: Dinh Nguyen dinguyen@kernel.org

[ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]

When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function.

Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree.

Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga") Signed-off-by: Dinh Nguyen dinguyen@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 8 -------- drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h | 4 ++++ drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 13 +++++-------- 3 files changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c index 8b50afcdb52d..729df169faa2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c @@ -68,10 +68,6 @@ #define TSE_PCS_USE_SGMII_ENA BIT(0) #define TSE_PCS_IF_USE_SGMII 0x03

-#define SGMII_ADAPTER_CTRL_REG 0x00 -#define SGMII_ADAPTER_DISABLE 0x0001 -#define SGMII_ADAPTER_ENABLE 0x0000 - #define AUTONEGO_LINK_TIMER 20

static int tse_pcs_reset(void __iomem *base, struct tse_pcs *pcs) @@ -213,12 +209,8 @@ void tse_pcs_fix_mac_speed(struct tse_pcs *pcs, struct phy_device *phy_dev, unsigned int speed) { void __iomem *tse_pcs_base = pcs->tse_pcs_base; - void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base; u32 val;

- writew(SGMII_ADAPTER_ENABLE, - sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); - pcs->autoneg = phy_dev->autoneg;

if (phy_dev->autoneg == AUTONEG_ENABLE) { diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h index 2f5882450b06..254199f2efdb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h @@ -21,6 +21,10 @@ #include <linux/phy.h> #include <linux/timer.h>

+#define SGMII_ADAPTER_CTRL_REG 0x00 +#define SGMII_ADAPTER_ENABLE 0x0000 +#define SGMII_ADAPTER_DISABLE 0x0001 + struct tse_pcs { struct device *dev; void __iomem *tse_pcs_base; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 33407df6bea6..32ead4a4b460 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -29,9 +29,6 @@

#include "altr_tse_pcs.h"

-#define SGMII_ADAPTER_CTRL_REG 0x00 -#define SGMII_ADAPTER_DISABLE 0x0001 - #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 @@ -65,16 +62,14 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) { struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv; void __iomem *splitter_base = dwmac->splitter_base; - void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base; void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base; struct device *dev = dwmac->dev; struct net_device *ndev = dev_get_drvdata(dev); struct phy_device *phy_dev = ndev->phydev; u32 val;

- if ((tse_pcs_base) && (sgmii_adapter_base)) - writew(SGMII_ADAPTER_DISABLE, - sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); + writew(SGMII_ADAPTER_DISABLE, + sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);

if (splitter_base) { val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG); @@ -96,7 +91,9 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG); }

- if (tse_pcs_base && sgmii_adapter_base) + writew(SGMII_ADAPTER_ENABLE, + sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); + if (phy_dev) tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed); }

From: Athira Rajeev atrajeev@linux.vnet.ibm.com

[ Upstream commit ce64763c63854b4079f2e036638aa881a1fb3fbc ]

The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed.

Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases.

Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev atrajeev@linux.vnet.ibm.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../testing/selftests/mqueue/mq_perf_tests.c | 25 +++++++++++++------ 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/tools/testing/selftests/mqueue/mq_perf_tests.c b/tools/testing/selftests/mqueue/mq_perf_tests.c index b019e0b8221c..84fda3b49073 100644 --- a/tools/testing/selftests/mqueue/mq_perf_tests.c +++ b/tools/testing/selftests/mqueue/mq_perf_tests.c @@ -180,6 +180,9 @@ void shutdown(int exit_val, char *err_cause, int line_no) if (in_shutdown++) return;

+ /* Free the cpu_set allocated using CPU_ALLOC in main function */ + CPU_FREE(cpu_set); + for (i = 0; i < num_cpus_to_pin; i++) if (cpu_threads[i]) { pthread_kill(cpu_threads[i], SIGUSR1); @@ -551,6 +554,12 @@ int main(int argc, char *argv[]) perror("sysconf(_SC_NPROCESSORS_ONLN)"); exit(1); } + + if (getuid() != 0) + ksft_exit_skip("Not running as root, but almost all tests " + "require root in order to modify\nsystem settings. " + "Exiting.\n"); + cpus_online = min(MAX_CPUS, sysconf(_SC_NPROCESSORS_ONLN)); cpu_set = CPU_ALLOC(cpus_online); if (cpu_set == NULL) { @@ -589,7 +598,7 @@ int main(int argc, char *argv[]) cpu_set)) { fprintf(stderr, "Any given CPU may " "only be given once.\n"); - exit(1); + goto err_code; } else CPU_SET_S(cpus_to_pin[cpu], cpu_set_size, cpu_set); @@ -607,7 +616,7 @@ int main(int argc, char *argv[]) queue_path = malloc(strlen(option) + 2); if (!queue_path) { perror("malloc()"); - exit(1); + goto err_code; } queue_path[0] = '/'; queue_path[1] = 0; @@ -622,17 +631,12 @@ int main(int argc, char *argv[]) fprintf(stderr, "Must pass at least one CPU to continuous " "mode.\n"); poptPrintUsage(popt_context, stderr, 0); - exit(1); + goto err_code; } else if (!continuous_mode) { num_cpus_to_pin = 1; cpus_to_pin[0] = cpus_online - 1; }

- if (getuid() != 0) - ksft_exit_skip("Not running as root, but almost all tests " - "require root in order to modify\nsystem settings. " - "Exiting.\n"); - max_msgs = fopen(MAX_MSGS, "r+"); max_msgsize = fopen(MAX_MSGSIZE, "r+"); if (!max_msgs) @@ -740,4 +744,9 @@ int main(int argc, char *argv[]) sleep(1); } shutdown(0, "", 0); + +err_code: + CPU_FREE(cpu_set); + exit(1); + }

From: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com

[ Upstream commit 64c4a37ac04eeb43c42d272f6e6c8c12bfcf4304 ]

Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max)

It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer.

Fixes: c69c1b6eaea1 ("cifs: implement CIFSParseMFSymlink()") Signed-off-by: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com Reviewed-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/link.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 2148b0f60e5e..5b1c33d9283a 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -97,6 +97,9 @@ parse_mf_symlink(const u8 *buf, unsigned int buf_len, unsigned int *_link_len, if (rc != 1) return -EINVAL;

+ if (link_len > CIFS_MF_SYMLINK_LINK_MAXLEN) + return -EINVAL; + rc = symlink_hash(link_len, link_str, md5_hash); if (rc) { cifs_dbg(FYI, "%s: MD5 hash failure: %d\n", __func__, rc);

From: QintaoShen unSimple1993@163.com

[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen unSimple1993@163.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c index e9f0e0a1b41c..892077377339 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c @@ -532,6 +532,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events) event_waiters = kmalloc_array(num_events, sizeof(struct kfd_event_waiter), GFP_KERNEL); + if (!event_waiters) + return NULL;

for (i = 0; (event_waiters) && (i < num_events) ; i++) { init_wait(&event_waiters[i].wait);

From: Xiaoguang Wang xiaoguang.wang@linux.alibaba.com

[ Upstream commit a6968f7a367f128d120447360734344d5a3d5336 ]

tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release().

We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().

Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibab... Reviewed-by: Bodo Stroesser bostroesser@gmail.com Signed-off-by: Xiaoguang Wang xiaoguang.wang@linux.alibaba.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index dd7307375504..f29d600357f3 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1499,6 +1499,7 @@ static struct page *tcmu_try_get_block_page(struct tcmu_dev *udev, uint32_t dbi) mutex_lock(&udev->cmdr_lock); page = tcmu_get_block_page(udev, dbi); if (likely(page)) { + get_page(page); mutex_unlock(&udev->cmdr_lock); return page; } @@ -1537,6 +1538,7 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf) /* For the vmalloc()ed cmd area pages */ addr = (void *)(unsigned long)info->mem[mi].addr + offset; page = vmalloc_to_page(addr); + get_page(page); } else { uint32_t dbi;

@@ -1547,7 +1549,6 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf) return VM_FAULT_SIGBUS; }

- get_page(page); vmf->page = page; return 0; }

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]

KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains.

Fixes kconfig warning and build errors:

WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]

ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'

Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: "David S. Miller" davem@davemloft.net Cc: Jakub Kicinski kuba@kernel.org Cc: Paolo Abeni pabeni@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/micrel/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index b7e2f49696b7..aa12bace8673 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -45,6 +45,7 @@ config KS8851 config KS8851_MLL tristate "Micrel KS8851 MLL" depends on HAS_IOMEM + depends on PTP_1588_CLOCK_OPTIONAL select MII ---help--- This platform driver is for Micrel KS8851 Address/data bus

From: Leo Ruan tingquan.ruan@cn.bosch.com

[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]

This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.

Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com Reviewed-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index d2f1bd9d3deb..c498dc7d8838 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -460,8 +460,9 @@ static void ipu_di_config_clock(struct ipu_di *di,

error = rate / (sig->mode.pixelclock / 1000);

- dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", - rate, div, (signed)(error - 1000) / 10, error % 10); + dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %c%d.%d%%\n", + rate, div, error < 1000 ? '-' : '+', + abs(error - 1000) / 10, abs(error - 1000) % 10);

/* Allow a 1% error */ if (error < 1010 && error >= 990) {

From: Roman Li Roman.Li@amd.com

[ Upstream commit f4346fb3edf7720db3f7f5e1cab1f667cd024280 ]

[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload()

[How] Use link type as indicator for mst link.

Reviewed-by: Wayne Lin Wayne.Lin@amd.com Acked-by: Alex Hung alex.hung@amd.com Signed-off-by: Roman Li Roman.Li@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b2835cd41d3e..57678e6dcdc4 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -777,7 +777,8 @@ static int dm_resume(void *handle) * this is the case when traversing through already created * MST connectors, should be skipped */ - if (aconnector->mst_port) + if (aconnector->dc_link && + aconnector->dc_link->type == dc_connection_mst_branch) continue;

mutex_lock(&aconnector->hpd_lock);

From: Duoming Zhou duoming@zju.edu.cn

[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]

When a slip driver is detaching, the slip_close() will act to cleanup necessary resources and sl->tty is set to NULL in slip_close(). Meanwhile, the packet we transmit is blocked, sl_tx_timeout() will be called. Although slip_close() and sl_tx_timeout() use sl->lock to synchronize, we don`t judge whether sl->tty equals to NULL in sl_tx_timeout() and the null pointer dereference bug will happen.

(Thread 1) | (Thread 2) | slip_close() | spin_lock_bh(&sl->lock) | ... ... | sl->tty = NULL //(1) sl_tx_timeout() | spin_unlock_bh(&sl->lock) spin_lock(&sl->lock); | ... | ... tty_chars_in_buffer(sl->tty)| if (tty->ops->..) //(2) | ... | synchronize_rcu()

We set NULL to sl->tty in position (1) and dereference sl->tty in position (2).

This patch adds check in sl_tx_timeout(). If sl->tty equals to NULL, sl_tx_timeout() will goto out.

Signed-off-by: Duoming Zhou duoming@zju.edu.cn Reviewed-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/slip/slip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 5d864f812955..3ec8d16a4633 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -471,7 +471,7 @@ static void sl_tx_timeout(struct net_device *dev) spin_lock(&sl->lock);

if (netif_queue_stopped(dev)) { - if (!netif_running(dev)) + if (!netif_running(dev) || !sl->tty) goto out;

/* May be we must check transmitter timeout here ?

From: Patrick Wang patrick.wang.shcn@gmail.com

commit 23c2d497de21f25898fbea70aeb292ab8acc8c94 upstream.

The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops:

# echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2

The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary.

Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang patrick.wang.shcn@gmail.com Acked-by: Catalin Marinas catalin.marinas@arm.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/kmemleak.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1196,7 +1196,7 @@ EXPORT_SYMBOL(kmemleak_no_scan); void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count, gfp_t gfp) { - if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) + if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) kmemleak_alloc(__va(phys), size, min_count, gfp); } EXPORT_SYMBOL(kmemleak_alloc_phys); @@ -1210,7 +1210,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys); */ void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size) { - if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) + if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) kmemleak_free_part(__va(phys), size); } EXPORT_SYMBOL(kmemleak_free_part_phys); @@ -1222,7 +1222,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys); */ void __ref kmemleak_not_leak_phys(phys_addr_t phys) { - if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) + if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) kmemleak_not_leak(__va(phys)); } EXPORT_SYMBOL(kmemleak_not_leak_phys); @@ -1234,7 +1234,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys); */ void __ref kmemleak_ignore_phys(phys_addr_t phys) { - if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) + if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) kmemleak_ignore(__va(phys)); } EXPORT_SYMBOL(kmemleak_ignore_phys);

From: Jason A. Donenfeld Jason@zx2c4.com

commit c40160f2998c897231f8454bf797558d30a20375 upstream.

While the latent entropy plugin mostly doesn't derive entropy from get_random_const() for measuring the call graph, when __latent_entropy is applied to a constant, then it's initialized statically to output from get_random_const(). In that case, this data is derived from a 64-bit seed, which means a buffer of 512 bits doesn't really have that amount of compile-time entropy.

This patch fixes that shortcoming by just buffering chunks of /dev/urandom output and doling it out as requested.

At the same time, it's important that we don't break the use of -frandom-seed, for people who want the runtime benefits of the latent entropy plugin, while still having compile-time determinism. In that case, we detect whether gcc's set_random_seed() has been called by making a call to get_random_seed(noinit=true) in the plugin init function, which is called after set_random_seed() is called but before anything that calls get_random_seed(noinit=false), and seeing if it's zero or not. If it's not zero, we're in deterministic mode, and so we just generate numbers with a basic xorshift prng.

Note that we don't detect if -frandom-seed is being used using the documented local_tick variable, because it's assigned via: local_tick = (unsigned) tv.tv_sec * 1000 + tv.tv_usec / 1000; which may well overflow and become -1 on its own, and so isn't reliable: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105171

[kees: The 256 byte rnd_buf size was chosen based on average (250), median (64), and std deviation (575) bytes of used entropy for a defconfig x86_64 build]

Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org Cc: PaX Team pageexec@freemail.hu Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20220405222815.21155-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- scripts/gcc-plugins/latent_entropy_plugin.c | 44 +++++++++++++++++----------- 1 file changed, 27 insertions(+), 17 deletions(-)

--- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -86,25 +86,31 @@ static struct plugin_info latent_entropy .help = "disable\tturn off latent entropy instrumentation\n", };

-static unsigned HOST_WIDE_INT seed; -/* - * get_random_seed() (this is a GCC function) generates the seed. - * This is a simple random generator without any cryptographic security because - * the entropy doesn't come from here. - */ +static unsigned HOST_WIDE_INT deterministic_seed; +static unsigned HOST_WIDE_INT rnd_buf[32]; +static size_t rnd_idx = ARRAY_SIZE(rnd_buf); +static int urandom_fd = -1; + static unsigned HOST_WIDE_INT get_random_const(void) { - unsigned int i; - unsigned HOST_WIDE_INT ret = 0; - - for (i = 0; i < 8 * sizeof(ret); i++) { - ret = (ret << 1) | (seed & 1); - seed >>= 1; - if (ret & 1) - seed ^= 0xD800000000000000ULL; + if (deterministic_seed) { + unsigned HOST_WIDE_INT w = deterministic_seed; + w ^= w << 13; + w ^= w >> 7; + w ^= w << 17; + deterministic_seed = w; + return deterministic_seed; }

- return ret; + if (urandom_fd < 0) { + urandom_fd = open("/dev/urandom", O_RDONLY); + gcc_assert(urandom_fd >= 0); + } + if (rnd_idx >= ARRAY_SIZE(rnd_buf)) { + gcc_assert(read(urandom_fd, rnd_buf, sizeof(rnd_buf)) == sizeof(rnd_buf)); + rnd_idx = 0; + } + return rnd_buf[rnd_idx++]; }

static tree tree_get_random_const(tree type) @@ -549,8 +555,6 @@ static void latent_entropy_start_unit(vo tree type, id; int quals;

- seed = get_random_seed(false); - if (in_lto_p) return;

@@ -585,6 +589,12 @@ __visible int plugin_init(struct plugin_ const struct plugin_argument * const argv = plugin_info->argv; int i;

+ /* + * Call get_random_seed() with noinit=true, so that this returns + * 0 in the case where no seed has been passed via -frandom-seed. + */ + deterministic_seed = get_random_seed(true); + static const struct ggc_root_tab gt_ggc_r_gt_latent_entropy[] = { { .base = &latent_entropy_decl,

From: Fabio M. De Francesco fmdefrancesco@gmail.com

commit 2f7a26abb8241a0208c68d22815aa247c5ddacab upstream.

Syzbot reports "KASAN: null-ptr-deref Write in snd_pcm_format_set_silence".[1]

It is due to missing validation of the "silence" field of struct "pcm_format_data" in "pcm_formats" array.

Add a test for valid "pat" and, if it is not so, return -EINVAL.

[1] https://lore.kernel.org/lkml/000000000000d188ef05dc2c7279@google.com/

Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com Signed-off-by: Fabio M. De Francesco fmdefrancesco@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/pcm_misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_misc.c +++ b/sound/core/pcm_misc.c @@ -423,7 +423,7 @@ int snd_pcm_format_set_silence(snd_pcm_f return 0; width = pcm_formats[(INT)format].phys; /* physical width */ pat = pcm_formats[(INT)format].silence; - if (! width) + if (!width || !pat) return -EINVAL; /* signed or 1 byte data */ if (pcm_formats[(INT)format].signd == 1 || width <= 8) {

From: Nathan Chancellor nathan@kernel.org

commit 83a1cde5c74bfb44b49cb2a940d044bb2380f4ea upstream.

With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:

Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0

The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall().

Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC.

Fixes: bae105879f2f ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY") Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Bartosz Golaszewski brgl@bgdev.pl Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/ Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/mach-davinci/board-da850-evm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1045,11 +1045,13 @@ static int __init da850_evm_config_emac( int ret; u32 val; struct davinci_soc_info *soc_info = &davinci_soc_info; - u8 rmii_en = soc_info->emac_pdata->rmii_en; + u8 rmii_en;

if (!machine_is_davinci_da850_evm()) return 0;

+ rmii_en = soc_info->emac_pdata->rmii_en; + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);

val = __raw_readl(cfg_chip3_base);

From: Martin Povišer povik+lin@cutebit.org

commit bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream.

Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it:

* Driver doesn't check for FIFO space.

* The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register.

Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support.

Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer povik+lin@cutebit.org Reviewed-by: Sven Peter sven@svenpeter.dev Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-pasemi.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -145,6 +145,12 @@ static int pasemi_i2c_xfer_msg(struct i2

TXFIFO_WR(smbus, msg->buf[msg->len-1] | (stop ? MTXFIFO_STOP : 0)); + + if (stop) { + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + } }

return 0;