ich7_lpc_probe() uses pci_read_config_dword() that returns PCIBIOS_* codes. The error handling code assumes incorrectly it's a normal errno and checks for < 0. The return code is returned from the probe function as is but probe functions should return normal errnos.

Remove < 0 from the check and convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it.

Fixes: a328e95b82c1 ("leds: LED driver for Intel NAS SS4200 series (v5)") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com --- drivers/leds/leds-ss4200.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index fcaa34706b6c..2ef9fc7371bd 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -356,8 +356,10 @@ static int ich7_lpc_probe(struct pci_dev *dev,

nas_gpio_pci_dev = dev; status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base); - if (status) + if (status) { + status = pcibios_err_to_errno(status); goto out; + } g_pm_io_base &= 0x00000ff80;

status = pci_read_config_dword(dev, GPIO_CTRL, &gc); @@ -369,8 +371,9 @@ static int ich7_lpc_probe(struct pci_dev *dev, }

status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base); - if (0 > status) { + if (status) { dev_info(&dev->dev, "Unable to read GPIOBASE.\n"); + status = pcibios_err_to_errno(status); goto out; } dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);