From: Jan Beulich jbeulich@suse.com

[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]

When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway.

Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Paul Durrant paul@xen.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index ad555a9a3eca..e1d6dbb4b770 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -492,7 +492,7 @@ check_frags: * the header's copy failed, and they are * sharing a slot, send an error */ - if (i == 0 && sharedslot) + if (i == 0 && !first_shinfo && sharedslot) xenvif_idx_release(queue, pending_idx, XEN_NETIF_RSP_ERROR); else

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]

The ext2_error() function syncs the filesystem so it sleeps. The caller is holding a spinlock so it's not allowed to sleep.

ext2_statfs() <- disables preempt -> ext2_count_free_blocks() -> ext2_get_group_desc()

Fix this by using WARN() to print an error message and a stack trace instead of using ext2_error().

Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext2/balloc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c index e1b3724bebf2..ccd5a7016c19 100644 --- a/fs/ext2/balloc.c +++ b/fs/ext2/balloc.c @@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, struct ext2_sb_info *sbi = EXT2_SB(sb);

if (block_group >= sbi->s_groups_count) { - ext2_error (sb, "ext2_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); + WARN(1, "block_group >= groups_count - " + "block_group = %d, groups_count = %lu", + block_group, sbi->s_groups_count);

return NULL; } @@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb); offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1); if (!sbi->s_group_desc[group_desc]) { - ext2_error (sb, "ext2_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); + WARN(1, "Group descriptor not loaded - " + "block_group = %d, group_desc = %lu, desc = %lu", + block_group, group_desc, offset); return NULL; }

From: Faizel K B faizel.kb@dicortech.com

[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]

testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed.

sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs

Signed-off-by: Faizel K B faizel.kb@dicortech.com Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/usb/testusb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index 2d89b5f686b1..791aadef2d59 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -278,12 +278,6 @@ nomem: }

entry->ifnum = ifnum; - - /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ - - fprintf(stderr, "%s speed\t%s\t%u\n", - speed(entry->speed), entry->name, entry->ifnum); - entry->next = testdevs; testdevs = entry; return 0; @@ -312,6 +306,14 @@ static void *handle_testdev (void *arg) return 0; }

+ status = ioctl(fd, USBDEVFS_GET_SPEED, NULL); + if (status < 0) + fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status); + else + dev->speed = status; + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(dev->speed), dev->name, dev->ifnum); + restart: for (i = 0; i < TEST_CASES; i++) { if (dev->test != -1 && dev->test != i)

From: Wen Xiong wenxiong@linux.ibm.com

[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]

Setting SCSI logging level with error=3, we saw some errors from enclosues:

[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13

Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).

Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.i... Reviewed-by: Brian King brking@linux.ibm.com Reviewed-by: James Bottomley jejb@linux.ibm.com Signed-off-by: Wen Xiong wenxiong@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ses.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 62f04c0511cf..4b993607887c 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -103,9 +103,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, 0 }; unsigned char recv_page_code; + unsigned int retries = SES_RETRIES; + struct scsi_sense_hdr sshdr; + + do { + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));

- ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(ret)) return ret;

@@ -137,9 +144,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + struct scsi_sense_hdr sshdr; + unsigned int retries = SES_RETRIES; + + do { + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));

- result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result);

From: Davidlohr Bueso dave@stgolabs.net

commit 511885d7061eda3eb1faf3f57dcc936ff75863f1 upstream.

Simplify the timerqueue code by using cached rbtrees and rely on the tree leftmost node semantics to get the timer with earliest expiration time. This is a drop in conversion, and therefore semantics remain untouched.

The runtime overhead of cached rbtrees is be pretty much the same as the current head->next method, noting that when removing the leftmost node, a common operation for the timerqueue, the rb_next(leftmost) is O(1) as well, so the next timer will either be the right node or its parent. Therefore no extra pointer chasing. Finally, the size of the struct timerqueue_head remains the same.

Passes several hours of rcutorture.

Signed-off-by: Davidlohr Bueso dbueso@suse.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20190724152323.bojciei3muvfxalm@linux-r8p5 Reference: CVE-2021-20317 Signed-off-by: Nobuhiro Iwamatsu (CIP) nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/timerqueue.h | 13 ++++++------- lib/timerqueue.c | 30 ++++++++++++------------------ 2 files changed, 18 insertions(+), 25 deletions(-)

--- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -12,8 +12,7 @@ struct timerqueue_node { };

struct timerqueue_head { - struct rb_root head; - struct timerqueue_node *next; + struct rb_root_cached rb_root; };

@@ -29,13 +28,14 @@ extern struct timerqueue_node *timerqueu * * @head: head of timerqueue * - * Returns a pointer to the timer node that has the - * earliest expiration time. + * Returns a pointer to the timer node that has the earliest expiration time. */ static inline struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head) { - return head->next; + struct rb_node *leftmost = rb_first_cached(&head->rb_root); + + return rb_entry(leftmost, struct timerqueue_node, node); }

static inline void timerqueue_init(struct timerqueue_node *node) @@ -45,7 +45,6 @@ static inline void timerqueue_init(struc

static inline void timerqueue_init_head(struct timerqueue_head *head) { - head->head = RB_ROOT; - head->next = NULL; + head->rb_root = RB_ROOT_CACHED; } #endif /* _LINUX_TIMERQUEUE_H */ --- a/lib/timerqueue.c +++ b/lib/timerqueue.c @@ -38,9 +38,10 @@ */ bool timerqueue_add(struct timerqueue_head *head, struct timerqueue_node *node) { - struct rb_node **p = &head->head.rb_node; + struct rb_node **p = &head->rb_root.rb_root.rb_node; struct rb_node *parent = NULL; - struct timerqueue_node *ptr; + struct timerqueue_node *ptr; + bool leftmost = true;

/* Make sure we don't add nodes that are already added */ WARN_ON_ONCE(!RB_EMPTY_NODE(&node->node)); @@ -48,19 +49,17 @@ bool timerqueue_add(struct timerqueue_he while (*p) { parent = *p; ptr = rb_entry(parent, struct timerqueue_node, node); - if (node->expires < ptr->expires) + if (node->expires < ptr->expires) { p = &(*p)->rb_left; - else + } else { p = &(*p)->rb_right; + leftmost = false; + } } rb_link_node(&node->node, parent, p); - rb_insert_color(&node->node, &head->head); + rb_insert_color_cached(&node->node, &head->rb_root, leftmost);

- if (!head->next || node->expires < head->next->expires) { - head->next = node; - return true; - } - return false; + return leftmost; } EXPORT_SYMBOL_GPL(timerqueue_add);

@@ -76,15 +75,10 @@ bool timerqueue_del(struct timerqueue_he { WARN_ON_ONCE(RB_EMPTY_NODE(&node->node));

- /* update next pointer */ - if (head->next == node) { - struct rb_node *rbn = rb_next(&node->node); - - head->next = rb_entry_safe(rbn, struct timerqueue_node, node); - } - rb_erase(&node->node, &head->head); + rb_erase_cached(&node->node, &head->rb_root); RB_CLEAR_NODE(&node->node); - return head->next != NULL; + + return !RB_EMPTY_ROOT(&head->rb_root.rb_root); } EXPORT_SYMBOL_GPL(timerqueue_del);