From: Martin Blumenstingl martin.blumenstingl@googlemail.com

commit 46c9585ed4af688ff1be6d4e76d7ed2f04de4fba upstream.

The PMU registers are at least 0x18 bytes wide. Meson8b already uses a size of 0x18. The structure of the PMU registers on Meson8 and Meson8b is similar but not identical.

Meson8 and Meson8b have the following registers in common (starting at AOBUS + 0xe0): #define AO_RTI_PWR_A9_CNTL0 0xe0 (0x38 << 2) #define AO_RTI_PWR_A9_CNTL1 0xe4 (0x39 << 2) #define AO_RTI_GEN_PWR_SLEEP0 0xe8 (0x3a << 2) #define AO_RTI_GEN_PWR_ISO0 0x4c (0x3b << 2)

Meson8b additionally has these three registers: #define AO_RTI_GEN_PWR_ACK0 0xf0 (0x3c << 2) #define AO_RTI_PWR_A9_MEM_PD0 0xf4 (0x3d << 2) #define AO_RTI_PWR_A9_MEM_PD1 0xf8 (0x3e << 2)

Thus we can assume that the register size of the PMU IP blocks is identical on both SoCs (and Meson8 just contains some reserved registers in that area) because the CEC registers start right after the PMU (AO_RTI_*) registers at AOBUS + 0x100 (0x40 << 2).

The upcoming power domain driver will need to read and write the AO_RTI_GEN_PWR_SLEEP0 and AO_RTI_GEN_PWR_ISO0 registers, so the updated size is needed for that driver to work.

Fixes: 4a5a27116b447d ("ARM: dts: meson8: add support for booting the secondary CPU cores") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/meson8.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -139,7 +139,7 @@ &aobus { pmu: pmu@e0 { compatible = "amlogic,meson8-pmu", "syscon"; - reg = <0xe0 0x8>; + reg = <0xe0 0x18>; };

pinctrl_aobus: pinctrl@84 {

From: Martin Blumenstingl martin.blumenstingl@googlemail.com

commit 4881873f4cc1460f63d85fa81363d56be328ccdc upstream.

According to the public S805 datasheet the RESET2 register uses the following bits for the PIC_DC, PSC and NAND reset lines: - PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3) - PSC is at bit 4 (meaning: RESET_VD_RMEM + 4) - NAND is at bit 5 (meaning: RESET_VD_RMEM + 4)

Update the reset IDs of these three reset lines so they don't conflict with PIC_DC and map to the actual hardware reset lines.

Fixes: 79795e20a184eb ("dt-bindings: reset: Add bindings for the Meson SoC Reset Controller") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/dt-bindings/reset/amlogic,meson8b-reset.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/dt-bindings/reset/amlogic,meson8b-reset.h +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -95,9 +95,9 @@ #define RESET_VD_RMEM 64 #define RESET_AUDIN 65 #define RESET_DBLK 66 -#define RESET_PIC_DC 66 -#define RESET_PSC 66 -#define RESET_NAND 66 +#define RESET_PIC_DC 67 +#define RESET_PSC 68 +#define RESET_NAND 69 #define RESET_GE2D 70 #define RESET_PARSER_REG 71 #define RESET_PARSER_FETCH 72

From: Guenter Roeck linux@roeck-us.net

commit 12ead77432f2ce32dea797742316d15c5800cb32 upstream.

The following traceback is seen if a critical clock fails to prepare.

bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL ------------[ cut here ]------------ Enabling unprepared plld_per WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:1014 clk_core_enable+0xcc/0x2c0 ... Call trace: clk_core_enable+0xcc/0x2c0 __clk_register+0x5c4/0x788 devm_clk_hw_register+0x4c/0xb0 bcm2835_register_pll_divider+0xc0/0x150 bcm2835_clk_probe+0x134/0x1e8 platform_drv_probe+0x50/0xa0 really_probe+0xd4/0x308 driver_probe_device+0x54/0xe8 device_driver_attach+0x6c/0x78 __driver_attach+0x54/0xd8 ...

Check return values from clk_core_prepare() and clk_core_enable() and bail out if any of those functions returns an error.

Cc: Jerome Brunet jbrunet@baylibre.com Fixes: 99652a469df1 ("clk: migrate the count of orphaned clocks at init") Signed-off-by: Guenter Roeck linux@roeck-us.net Link: https://lkml.kernel.org/r/20191225163429.29694-1-linux@roeck-us.net Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/clk/clk.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -3066,11 +3066,17 @@ static int __clk_core_init(struct clk_co if (core->flags & CLK_IS_CRITICAL) { unsigned long flags;

- clk_core_prepare(core); + ret = clk_core_prepare(core); + if (ret) + goto out;

flags = clk_enable_lock(); - clk_core_enable(core); + ret = clk_core_enable(core); clk_enable_unlock(flags); + if (ret) { + clk_core_unprepare(core); + goto out; + } }

/*

From: Lars Möllendorf lars.moellendorf@plating.de

commit 883f616530692d81cb70f8a32d85c0d2afc05f69 upstream.

Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set.

This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set.

Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars Möllendorf lars.moellendorf@plating.de Reviewed-by: Lars-Peter Clausen lars@metafoo.de Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/iio/industrialio-buffer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -570,7 +570,7 @@ static int iio_compute_scan_bytes(struct const unsigned long *mask, bool timestamp) { unsigned bytes = 0; - int length, i; + int length, i, largest = 0;

/* How much space will the demuxed element take? */ for_each_set_bit(i, mask, @@ -578,13 +578,17 @@ static int iio_compute_scan_bytes(struct length = iio_storage_bytes_for_si(indio_dev, i); bytes = ALIGN(bytes, length); bytes += length; + largest = max(largest, length); }

if (timestamp) { length = iio_storage_bytes_for_timestamp(indio_dev); bytes = ALIGN(bytes, length); bytes += length; + largest = max(largest, length); } + + bytes = ALIGN(bytes, largest); return bytes; }

From: Kristian Evensen kristian.evensen@gmail.com

commit accf227de4d211b52c830a58b2df00d5739f2389 upstream.

RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. Unlike other recent Quectel modems, it is possible to identify the diagnostic interface (bInterfaceProtocol is unique). Thus, there is no need to check for the number of endpoints or reserve interfaces. The interface number is still dynamic though, so matching on interface number is not possible and two entries have to be added to the table.

Output from usb-devices with all interfaces enabled (order is diag, nmea, at_port, modem, rmnet and adb):

Bus 004 Device 007: ID 2c7c:0800 Quectel Wireless Solutions Co., Ltd. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x0800 bcdDevice 4.14 iManufacturer 1 Quectel iProduct 2 LTE-A Module iSerial 3 40046d60 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 328 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 CDEV Serial Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 6 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 42 bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 1 micro seconds bU2DevExitLat 500 micro seconds ** UNRECOGNIZED: 14 10 0a 00 01 00 00 00 00 11 00 00 30 40 0a 00 b0 40 0a 00 Device Status: 0x0000 (Bus Powered)

Signed-off-by: Kristian Evensen kristian.evensen@gmail.com Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -248,6 +248,7 @@ static void option_instat_callback(struc #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 +#define QUECTEL_PRODUCT_RM500Q 0x0800

#define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -1104,6 +1105,9 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),

From: Reinhard Speyerer rspmn@arcor.de

commit f3eaabbfd093c93d791eb930cc68d9b15246a65e upstream.

Add support for Quectel RM500Q in QDL mode.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q.

Signed-off-by: Reinhard Speyerer rspmn@arcor.de Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1107,6 +1107,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), + .driver_info = ZLP },

{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },

From: Johan Hovold johan@kernel.org

commit 4d5ef53f75c22d28f490bcc5c771fcc610a9afa4 upstream.

Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe).

Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable stable@vger.kernel.org # 2.6.30 Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/ch341.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -589,9 +589,13 @@ static int ch341_tiocmget(struct tty_str static int ch341_reset_resume(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; - struct ch341_private *priv = usb_get_serial_port_data(port); + struct ch341_private *priv; int ret;

+ priv = usb_get_serial_port_data(port); + if (!priv) + return 0; + /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv);

From: Johan Hovold johan@kernel.org

commit 1568c58d11a7c851bd09341aeefd6a1c308ac40d upstream.

The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/io_edgeport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1734,7 +1734,8 @@ static void edge_break(struct tty_struct static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { - struct device *dev = &edge_serial->serial->dev->dev; + struct usb_serial *serial = edge_serial->serial; + struct device *dev = &serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; __u16 lastBufferLength; @@ -1839,9 +1840,8 @@ static void process_rcvd_data(struct edg

/* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[ - edge_serial->rxPort]; + if (rxLen && edge_serial->rxPort < serial->num_ports) { + port = serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port && edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", @@ -1851,8 +1851,8 @@ static void process_rcvd_data(struct edg rxLen); edge_port->port->icount.rx += rxLen; } - buffer += rxLen; } + buffer += rxLen; break;

case EXPECT_HDR3: /* Expect 3rd byte of status header */ @@ -1887,6 +1887,8 @@ static void process_rcvd_status(struct e __u8 code = edge_serial->rxStatusCode;

/* switch the port pointer to the one being currently talked about */ + if (edge_serial->rxPort >= edge_serial->serial->num_ports) + return; port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) {

From: Johan Hovold johan@kernel.org

commit 9715a43eea77e42678a1002623f2d9a78f5b81a1 upstream.

Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe).

Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable stable@vger.kernel.org # 3.5 Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/quatech2.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -864,7 +864,10 @@ static void qt2_update_msr(struct usb_se u8 newMSR = (u8) *ch; unsigned long flags;

+ /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return;

spin_lock_irqsave(&port_priv->lock, flags); port_priv->shadowMSR = newMSR; @@ -892,7 +895,10 @@ static void qt2_update_lsr(struct usb_se unsigned long flags; u8 newLSR = (u8) *ch;

+ /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return;

if (newLSR & UART_LSR_BI) newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);

From: Dan Carpenter dan.carpenter@oracle.com

commit 28d76df18f0ad5bcf5fa48510b225f0ed262a99b upstream.

Tom Hatskevich reported that we look up "iocp" then, in the called functions we do a second copy_from_user() and look it up again. The problem that could cause is:

drivers/message/fusion/mptctl.c 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) ^^^^ We take this lock.

678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(arg); ^^^ Then the user memory changes and we look up "iocp" again but a different one so now we are holding the incorrect lock and have a race condition.

682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(arg);

The security impact of this bug is not as bad as it could have been because these operations are all privileged and root already has enormous destructive power. But it's still worth fixing.

This patch passes the "iocp" pointer to the functions to avoid the second lookup. That deletes 100 lines of code from the driver so it's a nice clean up as well.

Link: https://lore.kernel.org/r/20200114123414.GA7957@kadam Reported-by: Tom Hatskevich tom2001tom.23@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/message/fusion/mptctl.c | 213 +++++++++------------------------------- 1 file changed, 50 insertions(+), 163 deletions(-)

--- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -100,19 +100,19 @@ struct buflist { * Function prototypes. Called from OS entry point mptctl_ioctl. * arg contents specific to function. */ -static int mptctl_fw_download(unsigned long arg); -static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd); -static int mptctl_gettargetinfo(unsigned long arg); -static int mptctl_readtest(unsigned long arg); -static int mptctl_mpt_command(unsigned long arg); -static int mptctl_eventquery(unsigned long arg); -static int mptctl_eventenable(unsigned long arg); -static int mptctl_eventreport(unsigned long arg); -static int mptctl_replace_fw(unsigned long arg); - -static int mptctl_do_reset(unsigned long arg); -static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd); -static int mptctl_hp_targetinfo(unsigned long arg); +static int mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_getiocinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); +static int mptctl_gettargetinfo(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_readtest(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_mpt_command(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventquery(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventenable(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventreport(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_replace_fw(MPT_ADAPTER *iocp, unsigned long arg); + +static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_hp_hostinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); +static int mptctl_hp_targetinfo(MPT_ADAPTER *iocp, unsigned long arg);

static int mptctl_probe(struct pci_dev *, const struct pci_device_id *); static void mptctl_remove(struct pci_dev *); @@ -123,8 +123,8 @@ static long compat_mpctl_ioctl(struct fi /* * Private function calls. */ -static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr); -static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen); +static int mptctl_do_mpt_command(MPT_ADAPTER *iocp, struct mpt_ioctl_command karg, void __user *mfPtr); +static int mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen); static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags, struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, @@ -656,19 +656,19 @@ __mptctl_ioctl(struct file *file, unsign * by TM and FW reloads. */ if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) { - return mptctl_getiocinfo(arg, _IOC_SIZE(cmd)); + return mptctl_getiocinfo(iocp, arg, _IOC_SIZE(cmd)); } else if (cmd == MPTTARGETINFO) { - return mptctl_gettargetinfo(arg); + return mptctl_gettargetinfo(iocp, arg); } else if (cmd == MPTTEST) { - return mptctl_readtest(arg); + return mptctl_readtest(iocp, arg); } else if (cmd == MPTEVENTQUERY) { - return mptctl_eventquery(arg); + return mptctl_eventquery(iocp, arg); } else if (cmd == MPTEVENTENABLE) { - return mptctl_eventenable(arg); + return mptctl_eventenable(iocp, arg); } else if (cmd == MPTEVENTREPORT) { - return mptctl_eventreport(arg); + return mptctl_eventreport(iocp, arg); } else if (cmd == MPTFWREPLACE) { - return mptctl_replace_fw(arg); + return mptctl_replace_fw(iocp, arg); }

/* All of these commands require an interrupt or @@ -678,15 +678,15 @@ __mptctl_ioctl(struct file *file, unsign return ret;

if (cmd == MPTFWDOWNLOAD) - ret = mptctl_fw_download(arg); + ret = mptctl_fw_download(iocp, arg); else if (cmd == MPTCOMMAND) - ret = mptctl_mpt_command(arg); + ret = mptctl_mpt_command(iocp, arg); else if (cmd == MPTHARDRESET) - ret = mptctl_do_reset(arg); + ret = mptctl_do_reset(iocp, arg); else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK)) - ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd)); + ret = mptctl_hp_hostinfo(iocp, arg, _IOC_SIZE(cmd)); else if (cmd == HP_GETTARGETINFO) - ret = mptctl_hp_targetinfo(arg); + ret = mptctl_hp_targetinfo(iocp, arg); else ret = -EINVAL;

@@ -705,11 +705,10 @@ mptctl_ioctl(struct file *file, unsigned return ret; }

-static int mptctl_do_reset(unsigned long arg) +static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg) { struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg; struct mpt_ioctl_diag_reset krinfo; - MPT_ADAPTER *iocp;

if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - " @@ -718,12 +717,6 @@ static int mptctl_do_reset(unsigned long return -EFAULT; }

- if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) { - printk(KERN_DEBUG MYNAM "%s@%d::mptctl_do_reset - ioc%d not found!\n", - __FILE__, __LINE__, krinfo.hdr.iocnum); - return -ENODEV; /* (-6) No such device or address */ - } - dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n", iocp->name));

@@ -754,7 +747,7 @@ static int mptctl_do_reset(unsigned long * -ENOMSG if FW upload returned bad status */ static int -mptctl_fw_download(unsigned long arg) +mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg) { struct mpt_fw_xfer __user *ufwdl = (void __user *) arg; struct mpt_fw_xfer kfwdl; @@ -766,7 +759,7 @@ mptctl_fw_download(unsigned long arg) return -EFAULT; }

- return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen); + return mptctl_do_fw_download(iocp, kfwdl.bufp, kfwdl.fwlen); }

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -784,11 +777,10 @@ mptctl_fw_download(unsigned long arg) * -ENOMSG if FW upload returned bad status */ static int -mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen) +mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen) { FWDownload_t *dlmsg; MPT_FRAME_HDR *mf; - MPT_ADAPTER *iocp; FWDownloadTCSGE_t *ptsge; MptSge_t *sgl, *sgIn; char *sgOut; @@ -808,17 +800,10 @@ mptctl_do_fw_download(int ioc, char __us pFWDownloadReply_t ReplyMsg = NULL; unsigned long timeleft;

- if (mpt_verify_adapter(ioc, &iocp) < 0) { - printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n", - ioc); - return -ENODEV; /* (-6) No such device or address */ - } else { - - /* Valid device. Get a message frame and construct the FW download message. - */ - if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) - return -EAGAIN; - } + /* Valid device. Get a message frame and construct the FW download message. + */ + if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) + return -EAGAIN;

dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id)); @@ -826,8 +811,6 @@ mptctl_do_fw_download(int ioc, char __us iocp->name, ufwbuf)); dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n", iocp->name, (int)fwlen)); - dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.ioc = %04xh\n", - iocp->name, ioc));

dlmsg = (FWDownload_t*) mf; ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL; @@ -1238,13 +1221,11 @@ kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_ * -ENODEV if no such device/adapter */ static int -mptctl_getiocinfo (unsigned long arg, unsigned int data_size) +mptctl_getiocinfo (MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) { struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg; struct mpt_ioctl_iocinfo *karg; - MPT_ADAPTER *ioc; struct pci_dev *pdev; - int iocnum; unsigned int port; int cim_rev; struct scsi_device *sdev; @@ -1272,14 +1253,6 @@ mptctl_getiocinfo (unsigned long arg, un return PTR_ERR(karg); }

- if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - kfree(karg); - return -ENODEV; - } - /* Verify the data transfer size is correct. */ if (karg->hdr.maxDataSize != data_size) { printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " @@ -1385,15 +1358,13 @@ mptctl_getiocinfo (unsigned long arg, un * -ENODEV if no such device/adapter */ static int -mptctl_gettargetinfo (unsigned long arg) +mptctl_gettargetinfo (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg; struct mpt_ioctl_targetinfo karg; - MPT_ADAPTER *ioc; VirtDevice *vdevice; char *pmem; int *pdata; - int iocnum; int numDevices = 0; int lun; int maxWordsLeft; @@ -1408,13 +1379,6 @@ mptctl_gettargetinfo (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n", ioc->name)); /* Get the port number and set the maximum number of bytes @@ -1510,12 +1474,10 @@ mptctl_gettargetinfo (unsigned long arg) * -ENODEV if no such device/adapter */ static int -mptctl_readtest (unsigned long arg) +mptctl_readtest (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_test __user *uarg = (void __user *) arg; struct mpt_ioctl_test karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - " @@ -1524,13 +1486,6 @@ mptctl_readtest (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_readtest() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n", ioc->name)); /* Fill in the data and return the structure to the calling @@ -1571,12 +1526,10 @@ mptctl_readtest (unsigned long arg) * -ENODEV if no such device/adapter */ static int -mptctl_eventquery (unsigned long arg) +mptctl_eventquery (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg; struct mpt_ioctl_eventquery karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - " @@ -1585,13 +1538,6 @@ mptctl_eventquery (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventquery() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n", ioc->name)); karg.eventEntries = MPTCTL_EVENT_LOG_SIZE; @@ -1610,12 +1556,10 @@ mptctl_eventquery (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_eventenable (unsigned long arg) +mptctl_eventenable (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg; struct mpt_ioctl_eventenable karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - " @@ -1624,13 +1568,6 @@ mptctl_eventenable (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventenable() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n", ioc->name)); if (ioc->events == NULL) { @@ -1658,12 +1595,10 @@ mptctl_eventenable (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_eventreport (unsigned long arg) +mptctl_eventreport (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg; struct mpt_ioctl_eventreport karg; - MPT_ADAPTER *ioc; - int iocnum; int numBytes, maxEvents, max;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) { @@ -1673,12 +1608,6 @@ mptctl_eventreport (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventreport() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n", ioc->name));

@@ -1712,12 +1641,10 @@ mptctl_eventreport (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_replace_fw (unsigned long arg) +mptctl_replace_fw (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg; struct mpt_ioctl_replace_fw karg; - MPT_ADAPTER *ioc; - int iocnum; int newFwSize;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) { @@ -1727,13 +1654,6 @@ mptctl_replace_fw (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_replace_fw() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n", ioc->name)); /* If caching FW, Free the old FW image @@ -1780,12 +1700,10 @@ mptctl_replace_fw (unsigned long arg) * -ENOMEM if memory allocation error */ static int -mptctl_mpt_command (unsigned long arg) +mptctl_mpt_command (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_command __user *uarg = (void __user *) arg; struct mpt_ioctl_command karg; - MPT_ADAPTER *ioc; - int iocnum; int rc;

@@ -1796,14 +1714,7 @@ mptctl_mpt_command (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_mpt_command() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - - rc = mptctl_do_mpt_command (karg, &uarg->MF); + rc = mptctl_do_mpt_command (ioc, karg, &uarg->MF);

return rc; } @@ -1821,9 +1732,8 @@ mptctl_mpt_command (unsigned long arg) * -EPERM if SCSI I/O and target is untagged */ static int -mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) +mptctl_do_mpt_command (MPT_ADAPTER *ioc, struct mpt_ioctl_command karg, void __user *mfPtr) { - MPT_ADAPTER *ioc; MPT_FRAME_HDR *mf = NULL; MPIHeader_t *hdr; char *psge; @@ -1832,7 +1742,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_ dma_addr_t dma_addr_in; dma_addr_t dma_addr_out; int sgSize = 0; /* Num SG elements */ - int iocnum, flagsLength; + int flagsLength; int sz, rc = 0; int msgContext; u16 req_idx; @@ -1847,13 +1757,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_ bufIn.kptr = bufOut.kptr = NULL; bufIn.len = bufOut.len = 0;

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - spin_lock_irqsave(&ioc->taskmgmt_lock, flags); if (ioc->ioc_reset_in_progress) { spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); @@ -2418,17 +2321,15 @@ done_free_mem: * -ENOMEM if memory allocation error */ static int -mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size) +mptctl_hp_hostinfo(MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) { hp_host_info_t __user *uarg = (void __user *) arg; - MPT_ADAPTER *ioc; struct pci_dev *pdev; char *pbuf=NULL; dma_addr_t buf_dma; hp_host_info_t karg; CONFIGPARMS cfg; ConfigPageHeader_t hdr; - int iocnum; int rc, cim_rev; ToolboxIstwiReadWriteRequest_t *IstwiRWRequest; MPT_FRAME_HDR *mf = NULL; @@ -2452,12 +2353,6 @@ mptctl_hp_hostinfo(unsigned long arg, un return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n", ioc->name));

@@ -2659,15 +2554,13 @@ retry_wait: * -ENOMEM if memory allocation error */ static int -mptctl_hp_targetinfo(unsigned long arg) +mptctl_hp_targetinfo(MPT_ADAPTER *ioc, unsigned long arg) { hp_target_info_t __user *uarg = (void __user *) arg; SCSIDevicePage0_t *pg0_alloc; SCSIDevicePage3_t *pg3_alloc; - MPT_ADAPTER *ioc; MPT_SCSI_HOST *hd = NULL; hp_target_info_t karg; - int iocnum; int data_sz; dma_addr_t page_dma; CONFIGPARMS cfg; @@ -2681,12 +2574,6 @@ mptctl_hp_targetinfo(unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } if (karg.hdr.id >= MPT_MAX_FC_DEVICES) return -EINVAL; dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n", @@ -2854,7 +2741,7 @@ compat_mptfwxfer_ioctl(struct file *filp kfw.fwlen = kfw32.fwlen; kfw.bufp = compat_ptr(kfw32.bufp);

- ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen); + ret = mptctl_do_fw_download(iocp, kfw.bufp, kfw.fwlen);

mutex_unlock(&iocp->ioctl_cmds.mutex);

@@ -2908,7 +2795,7 @@ compat_mpt_command(struct file *filp, un

/* Pass new structure to do_mpt_command */ - ret = mptctl_do_mpt_command (karg, &uarg->MF); + ret = mptctl_do_mpt_command (iocp, karg, &uarg->MF);

mutex_unlock(&iocp->ioctl_cmds.mutex);

From: Stephan Gerhold stephan@gerhold.net

commit 057efcf9faea4769cf1020677d93d040db9b23f3 upstream.

MIC BIAS Internal1 is broken at the moment because we always enable the internal rbias resistor to the TX2 line (connected to the headset microphone), rather than enabling the resistor connected to TX1.

Move the RBIAS code to pm8916_wcd_analog_enable_micbias_int1/2() to fix this.

Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20200111164006.43074-3-stephan@gerhold.net Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/codecs/msm8916-wcd-analog.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -388,9 +388,6 @@ static int pm8916_wcd_analog_enable_micb

switch (event) { case SND_SOC_DAPM_PRE_PMU: - snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS, - MICB_1_INT_TX2_INT_RBIAS_EN_MASK, - MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE); snd_soc_component_update_bits(component, reg, MICB_1_EN_PULL_DOWN_EN_MASK, 0); snd_soc_component_update_bits(component, CDC_A_MICB_1_EN, MICB_1_EN_OPA_STG2_TAIL_CURR_MASK, @@ -440,6 +437,14 @@ static int pm8916_wcd_analog_enable_micb struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);

+ switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS, + MICB_1_INT_TX1_INT_RBIAS_EN_MASK, + MICB_1_INT_TX1_INT_RBIAS_EN_ENABLE); + break; + } + return pm8916_wcd_analog_enable_micbias_int(component, event, w->reg, wcd->micbias1_cap_mode); } @@ -550,6 +555,11 @@ static int pm8916_wcd_analog_enable_micb struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);

switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS, + MICB_1_INT_TX2_INT_RBIAS_EN_MASK, + MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE); + break; case SND_SOC_DAPM_POST_PMU: pm8916_mbhc_configure_bias(wcd, true); break;

From: Takashi Sakamoto o-takashi@sakamocchi.jp

commit 3e2dc6bdb56893bc28257e482e1dbe5d39f313df upstream.

At failure of attempt to detect protocol extension, ALSA dice driver should be fallback to limited functionality. However it's not.

This commit fixes it.

Cc: stable@vger.kernel.org # v4.18+ Fixes: 58579c056c1c9 ("ALSA: dice: use extended protocol to detect available stream formats") Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/firewire/dice/dice-extension.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/sound/firewire/dice/dice-extension.c +++ b/sound/firewire/dice/dice-extension.c @@ -159,8 +159,11 @@ int snd_dice_detect_extension_formats(st int j;

for (j = i + 1; j < 9; ++j) { - if (pointers[i * 2] == pointers[j * 2]) + if (pointers[i * 2] == pointers[j * 2]) { + // Fallback to limited functionality. + err = -ENXIO; goto end; + } } }

From: Johan Hovold johan@kernel.org

commit 5d1b71226dc4d44b4b65766fa9d74492f9d4587b upstream.

The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was checking for there to be at least one altsetting but then went on to access the second one, which may not exist.

This could lead to random slab data being used to initialise the sync endpoint in snd_usb_add_endpoint().

Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback") Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP") Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204") Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II") Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk") Cc: stable stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20200114083953.1106-1-johan@kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/usb/pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -377,7 +377,7 @@ static int set_sync_ep_implicit_fb_quirk add_sync_ep_from_ifnum: iface = usb_ifnum_to_if(dev, ifnum);

- if (!iface || iface->num_altsetting == 0) + if (!iface || iface->num_altsetting < 2) return -EINVAL;

alts = &iface->altsetting[1];

From: Jari Ruusu jari.ruusu@gmail.com

commit f5ae2ea6347a308cfe91f53b53682ce635497d0d upstream.

Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:

"Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular"

When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this:

iucode_tool --write-earlyfw=FOO.cpio microcode-files...

However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed.

Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.

[ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ]

Signed-off-by: Jari Ruusu jari.ruusu@gmail.com Cc: Borislav Petkov bp@alien8.de Cc: Fenghua Yu fenghua.yu@intel.com Cc: Luis Chamberlain mcgrof@kernel.org Cc: stable@kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- firmware/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/firmware/Makefile +++ b/firmware/Makefile @@ -19,7 +19,7 @@ quiet_cmd_fwbin = MK_FW $@ PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \ echo "/* Generated by firmware/Makefile */" > $@;\ echo " .section .rodata" >>$@;\ - echo " .p2align $${ASM_ALIGN}" >>$@;\ + echo " .p2align 4" >>$@;\ echo "_fw_$${FWSTR}_bin:" >>$@;\ echo " .incbin "$(2)"" >>$@;\ echo "_fw_end:" >>$@;\

From: Kishon Vijay Abraham I kishon@ti.com

commit 0c4eb2a6b3c6b0facd0a3bccda5db22e7b3b6f96 upstream.

commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host).

Cc: stable stable@vger.kernel.org # 4.14+ Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/am571x-idk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -90,7 +90,7 @@

&pcie1_rc { status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; };

&pcie1_ep {

From: Christian Brauner christian.brauner@ubuntu.com

commit 6b3ad6649a4c75504edeba242d3fd36b3096a57f upstream.

Commit 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat") introduced the ability to opt out of audit messages for accesses to various proc files since they are not violations of policy. While doing so it somehow switched the check from ns_capable() to has_ns_capability{_noaudit}(). That means it switched from checking the subjective credentials of the task to using the objective credentials. This is wrong since. ptrace_has_cap() is currently only used in ptrace_may_access() And is used to check whether the calling task (subject) has the CAP_SYS_PTRACE capability in the provided user namespace to operate on the target task (object). According to the cred.h comments this would mean the subjective credentials of the calling task need to be used. This switches ptrace_has_cap() to use security_capable(). Because we only call ptrace_has_cap() in ptrace_may_access() and in there we already have a stable reference to the calling task's creds under rcu_read_lock() there's no need to go through another series of dereferences and rcu locking done in ns_capable{_noaudit}().

As one example where this might be particularly problematic, Jann pointed out that in combination with the upcoming IORING_OP_OPENAT feature, this bug might allow unprivileged users to bypass the capability checks while asynchronously opening files like /proc/*/mem, because the capability checks for this would be performed against kernel credentials.

To illustrate on the former point about this being exploitable: When io_uring creates a new context it records the subjective credentials of the caller. Later on, when it starts to do work it creates a kernel thread and registers a callback. The callback runs with kernel creds for ktask->real_cred and ktask->cred. To prevent this from becoming a full-blown 0-day io_uring will call override_cred() and override ktask->cred with the subjective credentials of the creator of the io_uring instance. With ptrace_has_cap() currently looking at ktask->real_cred this override will be ineffective and the caller will be able to open arbitray proc files as mentioned above. Luckily, this is currently not exploitable but will turn into a 0-day once IORING_OP_OPENAT{2} land in v5.6. Fix it now!

Cc: Oleg Nesterov oleg@redhat.com Cc: Eric Paris eparis@redhat.com Cc: stable@vger.kernel.org Reviewed-by: Kees Cook keescook@chromium.org Reviewed-by: Serge Hallyn serge@hallyn.com Reviewed-by: Jann Horn jannh@google.com Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat") Signed-off-by: Christian Brauner christian.brauner@ubuntu.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/ptrace.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -258,12 +258,17 @@ static int ptrace_check_attach(struct ta return ret; }

-static int ptrace_has_cap(struct user_namespace *ns, unsigned int mode) +static bool ptrace_has_cap(const struct cred *cred, struct user_namespace *ns, + unsigned int mode) { + int ret; + if (mode & PTRACE_MODE_NOAUDIT) - return has_ns_capability_noaudit(current, ns, CAP_SYS_PTRACE); + ret = security_capable(cred, ns, CAP_SYS_PTRACE, CAP_OPT_NOAUDIT); else - return has_ns_capability(current, ns, CAP_SYS_PTRACE); + ret = security_capable(cred, ns, CAP_SYS_PTRACE, CAP_OPT_NONE); + + return ret == 0; }

/* Returns 0 on success, -errno on denial. */ @@ -315,7 +320,7 @@ static int __ptrace_may_access(struct ta gid_eq(caller_gid, tcred->sgid) && gid_eq(caller_gid, tcred->gid)) goto ok; - if (ptrace_has_cap(tcred->user_ns, mode)) + if (ptrace_has_cap(cred, tcred->user_ns, mode)) goto ok; rcu_read_unlock(); return -EPERM; @@ -334,7 +339,7 @@ ok: mm = task->mm; if (mm && ((get_dumpable(mm) != SUID_DUMP_USER) && - !ptrace_has_cap(mm->user_ns, mode))) + !ptrace_has_cap(cred, mm->user_ns, mode))) return -EPERM;

return security_ptrace_access_check(task, mode);

From: Qian Cai cai@lca.pw

commit e278af89f1ba0a9ef20947db6afc2c9afa37e85b upstream.

A system that supports resource monitoring may have multiple resources while not all of these resources are capable of monitoring. Monitoring related state is initialized only for resources that are capable of monitoring and correspondingly this state should subsequently only be removed from these resources that are capable of monitoring.

domain_add_cpu() calls domain_setup_mon_state() only when r->mon_capable is true where it will initialize d->mbm_over. However, domain_remove_cpu() calls cancel_delayed_work(&d->mbm_over) without checking r->mon_capable resulting in an attempt to cancel d->mbm_over on all resources, even those that never initialized d->mbm_over because they are not capable of monitoring. Hence, it triggers a debugobjects warning when offlining CPUs because those timer debugobjects are never initialized:

ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 WARNING: CPU: 143 PID: 789 at lib/debugobjects.c:484 debug_print_object Hardware name: HP Synergy 680 Gen9/Synergy 680 Gen9 Compute Module, BIOS I40 05/23/2018 RIP: 0010:debug_print_object Call Trace: debug_object_assert_init del_timer try_to_grab_pending cancel_delayed_work resctrl_offline_cpu cpuhp_invoke_callback cpuhp_thread_fun smpboot_thread_fn kthread ret_from_fork

Fixes: e33026831bdb ("x86/intel_rdt/mbm: Handle counter overflow") Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Reinette Chatre reinette.chatre@intel.com Cc: Fenghua Yu fenghua.yu@intel.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Cc: stable@vger.kernel.org Cc: Thomas Gleixner tglx@linutronix.de Cc: tj@kernel.org Cc: Tony Luck tony.luck@intel.com Cc: Vikas Shivappa vikas.shivappa@linux.intel.com Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20191211033042.2188-1-cai@lca.pw Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/cpu/intel_rdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/intel_rdt.c +++ b/arch/x86/kernel/cpu/intel_rdt.c @@ -595,7 +595,7 @@ static void domain_remove_cpu(int cpu, s if (static_branch_unlikely(&rdt_mon_enable_key)) rmdir_mondata_subdir_allrdtgrp(r, d->id); list_del(&d->list); - if (is_mbm_enabled()) + if (r->mon_capable && is_mbm_enabled()) cancel_delayed_work(&d->mbm_over); if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) { /*

From: Ard Biesheuvel ardb@kernel.org

commit 4911ee401b7ceff8f38e0ac597cbf503d71e690c upstream.

The EFI mixed mode entry code goes through the ordinary startup_32() routine before jumping into the kernel's EFI boot code in 64-bit mode. The 32-bit startup code must be entered with paging disabled, but this is not documented as a requirement for the EFI handover protocol, and so we should disable paging explicitly when entering the kernel from 32-bit EFI firmware.

Signed-off-by: Ard Biesheuvel ardb@kernel.org Cc: stable@vger.kernel.org Cc: Arvind Sankar nivedita@alum.mit.edu Cc: Hans de Goede hdegoede@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191224132909.102540-4-ardb@kernel.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/boot/compressed/head_64.S | 5 +++++ 1 file changed, 5 insertions(+)

--- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -244,6 +244,11 @@ ENTRY(efi32_stub_entry) leal efi32_config(%ebp), %eax movl %eax, efi_config(%ebp)

+ /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + jmp startup_32 ENDPROC(efi32_stub_entry) #endif

From: Shakeel Butt shakeelb@google.com

commit ab6a2114433a3b5b555983dcb9b752a85255f04b upstream.

set_cache_qos_cfg() is leaking memory when the given level is not RDT_RESOURCE_L3 or RDT_RESOURCE_L2. At the moment, this function is called with only valid levels but move the allocation after the valid level checks in order to make it more robust and future proof.

[ bp: Massage commit message. ]

Fixes: 99adde9b370de ("x86/intel_rdt: Enable L2 CDP in MSR IA32_L2_QOS_CFG") Signed-off-by: Shakeel Butt shakeelb@google.com Signed-off-by: Borislav Petkov bp@suse.de Cc: Fenghua Yu fenghua.yu@intel.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Reinette Chatre reinette.chatre@intel.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20200102165844.133133-1-shakeelb@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -1749,9 +1749,6 @@ static int set_cache_qos_cfg(int level, struct rdt_domain *d; int cpu;

- if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL)) - return -ENOMEM; - if (level == RDT_RESOURCE_L3) update = l3_qos_cfg_update; else if (level == RDT_RESOURCE_L2) @@ -1759,6 +1756,9 @@ static int set_cache_qos_cfg(int level, else return -EINVAL;

+ if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL)) + return -ENOMEM; + r_l = &rdt_resources_all[level]; list_for_each_entry(d, &r_l->domains, list) { /* Pick one CPU from each domain instance to update MSR */

From: Jin Yao yao.jin@linux.intel.com

commit 0feba17bd7ee3b7e03d141f119049dcc23efa94e upstream.

We observed an issue that was some extra columns displayed after switching perf data file in browser. The steps to reproduce:

1. perf record -a -e cycles,instructions -- sleep 3 2. perf report --group 3. In browser, we use hotkey 's' to switch to another perf.data 4. Now in browser, the extra columns 'Self' and 'Children' are displayed.

The issue is setup_sorting() executed again after repeat path, so dimensions are added again.

This patch checks the last key returned from __cmd_report(). If it's K_SWITCH_INPUT_DATA, skips the setup_sorting().

Fixes: ad0de0971b7f ("perf report: Enable the runtime switching of perf data file") Signed-off-by: Jin Yao yao.jin@linux.intel.com Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Acked-by: Jiri Olsa jolsa@redhat.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Feng Tang feng.tang@intel.com Cc: Jin Yao yao.jin@intel.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/builtin-report.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -961,6 +961,7 @@ int cmd_report(int argc, const char **ar struct stat st; bool has_br_stack = false; int branch_mode = -1; + int last_key = 0; bool branch_call_mode = false; #define CALLCHAIN_DEFAULT_OPT "graph,0.5,caller,function,percent" const char report_callchain_help[] = "Display call graph (stack chain/backtrace):\n\n" @@ -1292,7 +1293,8 @@ repeat: else use_browser = 0;

- if (setup_sorting(session->evlist) < 0) { + if ((last_key != K_SWITCH_INPUT_DATA) && + (setup_sorting(session->evlist) < 0)) { if (sort_order) parse_options_usage(report_usage, options, "s", 1); if (field_order) @@ -1390,6 +1392,7 @@ repeat: ret = __cmd_report(&report); if (ret == K_SWITCH_INPUT_DATA) { perf_session__delete(session); + last_key = K_SWITCH_INPUT_DATA; goto repeat; } else ret = 0;

From: Adrian Huang ahuang12@lenovo.com

commit 2fe20210fc5f5e62644678b8f927c49f2c6f42a7 upstream.

When booting with amd_iommu=off, the following WARNING message appears:

AMD-Vi: AMD IOMMU disabled on kernel command-line ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6 Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019 RIP: 0010:flush_workqueue+0x42e/0x450 Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04 Call Trace: kmem_cache_destroy+0x69/0x260 iommu_go_to_state+0x40c/0x5ab amd_iommu_prepare+0x16/0x2a irq_remapping_prepare+0x36/0x5f enable_IR_x2apic+0x21/0x172 default_setup_apic_routing+0x12/0x6f apic_intr_mode_init+0x1a1/0x1f1 x86_late_time_init+0x17/0x1c start_kernel+0x480/0x53f secondary_startup_64+0xb6/0xc0 ---[ end trace 30894107c3749449 ]--- x2apic: IRQ remapping doesn't support X2APIC mode x2apic disabled

The warning is caused by the calling of 'kmem_cache_destroy()' in free_iommu_resources(). Here is the call path:

free_iommu_resources kmem_cache_destroy flush_memcg_workqueue flush_workqueue

The root cause is that the IOMMU subsystem runs before the workqueue subsystem, which the variable 'wq_online' is still 'false'. This leads to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is 'true'.

Since the variable 'memcg_kmem_cache_wq' is not allocated during the time, it is unnecessary to call flush_memcg_workqueue(). This prevents the WARNING message triggered by flush_workqueue().

Link: http://lkml.kernel.org/r/20200103085503.1665-1-ahuang12@lenovo.com Fixes: 92ee383f6daab ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Adrian Huang ahuang12@lenovo.com Reported-by: Xiaochun Lee lixc17@lenovo.com Reviewed-by: Shakeel Butt shakeelb@google.com Cc: Joerg Roedel jroedel@suse.de Cc: Christoph Lameter cl@linux.com Cc: Pekka Enberg penberg@kernel.org Cc: David Rientjes rientjes@google.com Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Cc: Michal Hocko mhocko@kernel.org Cc: Johannes Weiner hannes@cmpxchg.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/slab_common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -850,7 +850,8 @@ static void flush_memcg_workqueue(struct * deactivates the memcg kmem_caches through workqueue. Make sure all * previous workitems on workqueue are processed. */ - flush_workqueue(memcg_kmem_cache_wq); + if (likely(memcg_kmem_cache_wq)) + flush_workqueue(memcg_kmem_cache_wq); } #else static inline int shutdown_memcg_caches(struct kmem_cache *s)

From: Josef Bacik josef@toxicpanda.com

commit d49d3287e74ffe55ae7430d1e795e5f9bf7359ea upstream.

If we have the following sequence of events

btrfs sub create A btrfs sub create A/B btrfs sub snap A C mkdir C/foo mv A/B C/foo rm -rf *

We will end up with a transaction abort.

The reason for this is because we create a root ref for B pointing to A. When we create a snapshot of C we still have B in our tree, but because the root ref points to A and not C we will make it appear to be empty.

The problem happens when we move B into C. This removes the root ref for B pointing to A and adds a ref of B pointing to C. When we rmdir C we'll see that we have a ref to our root and remove the root ref, despite not actually matching our reference name.

Now btrfs_del_root_ref() allowing this to work is a bug as well, however we know that this inode does not actually point to a root ref in the first place, so we shouldn't be calling btrfs_del_root_ref() in the first place and instead simply look up our dir index for this item and do the rest of the removal.

CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/inode.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-)

--- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4168,13 +4168,16 @@ static int btrfs_unlink_subvol(struct bt } btrfs_release_path(path);

- ret = btrfs_del_root_ref(trans, objectid, root->root_key.objectid, - dir_ino, &index, name, name_len); - if (ret < 0) { - if (ret != -ENOENT) { - btrfs_abort_transaction(trans, ret); - goto out; - } + /* + * This is a placeholder inode for a subvolume we didn't have a + * reference to at the time of the snapshot creation. In the meantime + * we could have renamed the real subvol link into our snapshot, so + * depending on btrfs_del_root_ref to return -ENOENT here is incorret. + * Instead simply lookup the dir_index_item for this entry so we can + * remove it. Otherwise we know we have a ref to the root and we can + * call btrfs_del_root_ref, and it _shouldn't_ fail. + */ + if (btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) { di = btrfs_search_dir_index_item(root, path, dir_ino, name, name_len); if (IS_ERR_OR_NULL(di)) { @@ -4189,8 +4192,16 @@ static int btrfs_unlink_subvol(struct bt leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); index = key.offset; + btrfs_release_path(path); + } else { + ret = btrfs_del_root_ref(trans, objectid, + root->root_key.objectid, dir_ino, + &index, name, name_len); + if (ret) { + btrfs_abort_transaction(trans, ret); + goto out; + } } - btrfs_release_path(path);

ret = btrfs_delete_delayed_dir_index(trans, BTRFS_I(dir), index); if (ret) {

From: Johannes Thumshirn johannes.thumshirn@wdc.com

commit 26ef8493e1ab771cb01d27defca2fa1315dc3980 upstream.

When running xfstests on the current btrfs I get the following splat from kmemleak:

unreferenced object 0xffff88821b2404e0 (size 32): comm "kworker/u4:7", pid 26663, jiffies 4295283698 (age 8.776s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 10 ff fd 26 82 88 ff ff ...........&.... 10 ff fd 26 82 88 ff ff 20 ff fd 26 82 88 ff ff ...&.... ..&.... backtrace: [<00000000f94fd43f>] ulist_alloc+0x25/0x60 [btrfs] [<00000000fd023d99>] btrfs_find_all_roots_safe+0x41/0x100 [btrfs] [<000000008f17bd32>] btrfs_find_all_roots+0x52/0x70 [btrfs] [<00000000b7660afb>] btrfs_qgroup_rescan_worker+0x343/0x680 [btrfs] [<0000000058e66778>] btrfs_work_helper+0xac/0x1e0 [btrfs] [<00000000f0188930>] process_one_work+0x1cf/0x350 [<00000000af5f2f8e>] worker_thread+0x28/0x3c0 [<00000000b55a1add>] kthread+0x109/0x120 [<00000000f88cbd17>] ret_from_fork+0x35/0x40

This corresponds to:

(gdb) l *(btrfs_find_all_roots_safe+0x41) 0x8d7e1 is in btrfs_find_all_roots_safe (fs/btrfs/backref.c:1413). 1408 1409 tmp = ulist_alloc(GFP_NOFS); 1410 if (!tmp) 1411 return -ENOMEM; 1412 *roots = ulist_alloc(GFP_NOFS); 1413 if (!*roots) { 1414 ulist_free(tmp); 1415 return -ENOMEM; 1416 } 1417

Following the lifetime of the allocated 'roots' ulist, it gets freed again in btrfs_qgroup_account_extent().

But this does not happen if the function is called with the 'BTRFS_FS_QUOTA_ENABLED' flag cleared, then btrfs_qgroup_account_extent() does a short leave and directly returns.

Instead of directly returning we should jump to the 'out_free' in order to free all resources as expected.

CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Johannes Thumshirn johannes.thumshirn@wdc.com [ add comment ] Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/qgroup.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2055,8 +2055,12 @@ int btrfs_qgroup_account_extent(struct b u64 nr_old_roots = 0; int ret = 0;

+ /* + * If quotas get disabled meanwhile, the resouces need to be freed and + * we can't just exit here. + */ if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags)) - return 0; + goto out_free;

if (new_roots) { if (!maybe_fs_roots(new_roots))

From: Jacopo Mondi jacopo@jmondi.org

commit 37c045d25e90038682b845de0a1db43c8301694d upstream.

The 1.5 version of Engicam's i.Core MX6 CPU module features a different clock provider for the ethernet's PHY interface. Adjust the FEC ptp clock to reference CLK_ENET_REF clock source, and set SION bit of MX6QDL_PAD_GPIO_16__ENET_REF_CLK to adjust the input path of that pin.

The newly introduced imx6ql-icore-1.5.dtsi allows to collect in a single place differences between version '1.0' and '1.5' of the module.

Reviewed-by: Fabio Estevam fabio.estevam@nxp.com Signed-off-by: Jacopo Mondi jacopo@jmondi.org Cc: Daniel Díaz daniel.diaz@linaro.org Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 34 +++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)

--- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Jacopo Mondi jacopo@jmondi.org + */ + +#include "imx6qdl-icore.dtsi" + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + phy-mode = "rmii"; + status = "okay"; +};

From: Marcel Ziswiler marcel.ziswiler@toradex.com

commit 4b0b97e651ecf29f20248420b52b6864fbd40bc2 upstream.

Turns out when introducing the eMMC version the gpmi node required for NAND flash support got enabled exclusively on Colibri iMX7D 512MB.

Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/imx7s-colibri.dtsi | 4 ++++ 1 file changed, 4 insertions(+)

--- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -49,3 +49,7 @@ reg = <0x80000000 0x10000000>; }; }; + +&gpmi { + status = "okay"; +};

From: Jose Abreu Jose.Abreu@synopsys.com

commit b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream.

XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size.

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu Jose.Abreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1082,7 +1082,9 @@ static int stmmac_set_bfsize(int mtu, in { int ret = bufsize;

- if (mtu >= BUF_SIZE_4KiB) + if (mtu >= BUF_SIZE_8KiB) + ret = BUF_SIZE_16KiB; + else if (mtu >= BUF_SIZE_4KiB) ret = BUF_SIZE_8KiB; else if (mtu >= BUF_SIZE_2KiB) ret = BUF_SIZE_4KiB;

From: Kirill A. Shutemov kirill@shutemov.name

[ Upstream commit 97d3d0f9a1cf132c63c0b8b8bd497b8a56283dd9 ]

Patch series "Fix two above-47bit hint address vs. THP bugs".

The two get_unmapped_area() implementations have to be fixed to provide THP-friendly mappings if above-47bit hint address is specified.

This patch (of 2):

Filesystems use thp_get_unmapped_area() to provide THP-friendly mappings. For DAX in particular.

Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information.

Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address.

Unfortunately, this trick breaks thp_get_unmapped_area(): the function would not try to allocate PMD-aligned area if *any* hint address specified.

Modify the routine to handle it correctly:

- Try to allocate the space at the specified hint address with length padding required for PMD alignment. - If failed, retry without length padding (but with the same hint address); - If the returned address matches the hint address return it. - Otherwise, align the address as required for THP and return.

The user specified hint address is passed down to get_unmapped_area() so above-47bit hint address will be taken into account without breaking alignment requirements.

Link: http://lkml.kernel.org/r/20191220142548.7118-2-kirill.shutemov@linux.intel.c... Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Reported-by: Thomas Willhalm thomas.willhalm@intel.com Tested-by: Dan Williams dan.j.williams@intel.com Cc: "Aneesh Kumar K . V" aneesh.kumar@linux.vnet.ibm.com Cc: "Bruggeman, Otto G" otto.g.bruggeman@intel.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/huge_memory.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 950466876625..5bb93cf18009 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -509,13 +509,13 @@ void prep_transhuge_page(struct page *page) set_compound_page_dtor(page, TRANSHUGE_PAGE_DTOR); }

-static unsigned long __thp_get_unmapped_area(struct file *filp, unsigned long len, +static unsigned long __thp_get_unmapped_area(struct file *filp, + unsigned long addr, unsigned long len, loff_t off, unsigned long flags, unsigned long size) { - unsigned long addr; loff_t off_end = off + len; loff_t off_align = round_up(off, size); - unsigned long len_pad; + unsigned long len_pad, ret;

if (off_end <= off_align || (off_end - off_align) < size) return 0; @@ -524,30 +524,40 @@ static unsigned long __thp_get_unmapped_area(struct file *filp, unsigned long le if (len_pad < len || (off + len_pad) < off) return 0;

- addr = current->mm->get_unmapped_area(filp, 0, len_pad, + ret = current->mm->get_unmapped_area(filp, addr, len_pad, off >> PAGE_SHIFT, flags); - if (IS_ERR_VALUE(addr)) + + /* + * The failure might be due to length padding. The caller will retry + * without the padding. + */ + if (IS_ERR_VALUE(ret)) return 0;

- addr += (off - addr) & (size - 1); - return addr; + /* + * Do not try to align to THP boundary if allocation at the address + * hint succeeds. + */ + if (ret == addr) + return addr; + + ret += (off - ret) & (size - 1); + return ret; }

unsigned long thp_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { + unsigned long ret; loff_t off = (loff_t)pgoff << PAGE_SHIFT;

- if (addr) - goto out; if (!IS_DAX(filp->f_mapping->host) || !IS_ENABLED(CONFIG_FS_DAX_PMD)) goto out;

- addr = __thp_get_unmapped_area(filp, len, off, flags, PMD_SIZE); - if (addr) - return addr; - - out: + ret = __thp_get_unmapped_area(filp, addr, len, off, flags, PMD_SIZE); + if (ret) + return ret; +out: return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags); } EXPORT_SYMBOL_GPL(thp_get_unmapped_area);

From: Daniel Borkmann daniel@iogearbox.net

commit 0af2ffc93a4b50948f9dad2786b7f1bd253bf0b9 upstream.

Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes:

0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...]

Taking a closer look, the program was xlated as follows:

# ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit

Meaning, the visible effect is very similar to f54c7898ed1c ("bpf: Fix precision tracking for unbounded scalars"), that is, the fall-through branch in the instruction 5 is considered to be never taken given the conclusion from the min/max bounds tracking in w6, and therefore the dead-code sanitation rewrites it as goto pc-1. However, real-life input disagrees with verification analysis since a soft-lockup was observed.

The bug sits in the analysis of the ARSH. The definition is that we shift the target register value right by K bits through shifting in copies of its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the register into 32 bit mode, same happens after simulating the operation. However, for the case of simulating the actual ARSH, we don't take the mode into account and act as if it's always 64 bit, but location of sign bit is different:

dst_reg->smin_value >>= umin_val; dst_reg->smax_value >>= umin_val; dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val);

Consider an unknown R0 where bpf_get_socket_cookie() (or others) would for example return 0xffff. With the above ARSH simulation, we'd see the following results:

[...] 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (57) r0 &= 808464432 -> R0_runtime = 0x3030 3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 3: (14) w0 -= 810299440 -> R0_runtime = 0xcfb40000 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 (0xffffffff) 4: (c4) w0 s>>= 1 -> R0_runtime = 0xe7da0000 5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0x7ffbfff8) [...]

In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011 0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into 0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000' and means here that the simulation didn't retain the sign bit. With above logic, the updates happen on the 64 bit min/max bounds and given we coerced the register, the sign bits of the bounds are cleared as well, meaning, we need to force the simulation into s32 space for 32 bit alu mode.

Verification after the fix below. We're first analyzing the fall-through branch on 32 bit signed >= test eventually leading to rejection of the program in this specific case:

0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r2 = 808464432 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (bf) r6 = r0 3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0 3: (57) r6 &= 808464432 4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 4: (14) w6 -= 810299440 5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 5: (c4) w6 s>>= 1 6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0xfffbfff8) 6: (76) if w6 s>= 0x30303030 goto pc+216 7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 7: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 8 insns (limit 1000000) [...]

Fixes: 9cbe1f5a32dc ("bpf/verifier: improve register value range tracking with ARSH") Reported-by: Anatoly Trosinenko anatoly.trosinenko@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Yonghong Song yhs@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/tnum.h | 2 +- kernel/bpf/tnum.c | 9 +++++++-- kernel/bpf/verifier.c | 13 ++++++++++--- 3 files changed, 18 insertions(+), 6 deletions(-)

--- a/include/linux/tnum.h +++ b/include/linux/tnum.h @@ -26,7 +26,7 @@ struct tnum tnum_lshift(struct tnum a, u /* Shift (rsh) a tnum right (by a fixed shift) */ struct tnum tnum_rshift(struct tnum a, u8 shift); /* Shift (arsh) a tnum right (by a fixed min_shift) */ -struct tnum tnum_arshift(struct tnum a, u8 min_shift); +struct tnum tnum_arshift(struct tnum a, u8 min_shift, u8 insn_bitness); /* Add two tnums, return @a + @b */ struct tnum tnum_add(struct tnum a, struct tnum b); /* Subtract two tnums, return @a - @b */ --- a/kernel/bpf/tnum.c +++ b/kernel/bpf/tnum.c @@ -43,14 +43,19 @@ struct tnum tnum_rshift(struct tnum a, u return TNUM(a.value >> shift, a.mask >> shift); }

-struct tnum tnum_arshift(struct tnum a, u8 min_shift) +struct tnum tnum_arshift(struct tnum a, u8 min_shift, u8 insn_bitness) { /* if a.value is negative, arithmetic shifting by minimum shift * will have larger negative offset compared to more shifting. * If a.value is nonnegative, arithmetic shifting by minimum shift * will have larger positive offset compare to more shifting. */ - return TNUM((s64)a.value >> min_shift, (s64)a.mask >> min_shift); + if (insn_bitness == 32) + return TNUM((u32)(((s32)a.value) >> min_shift), + (u32)(((s32)a.mask) >> min_shift)); + else + return TNUM((s64)a.value >> min_shift, + (s64)a.mask >> min_shift); }

struct tnum tnum_add(struct tnum a, struct tnum b) --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -3309,9 +3309,16 @@ static int adjust_scalar_min_max_vals(st /* Upon reaching here, src_known is true and * umax_val is equal to umin_val. */ - dst_reg->smin_value >>= umin_val; - dst_reg->smax_value >>= umin_val; - dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val); + if (insn_bitness == 32) { + dst_reg->smin_value = (u32)(((s32)dst_reg->smin_value) >> umin_val); + dst_reg->smax_value = (u32)(((s32)dst_reg->smax_value) >> umin_val); + } else { + dst_reg->smin_value >>= umin_val; + dst_reg->smax_value >>= umin_val; + } + + dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val, + insn_bitness);

/* blow away the dst_reg umin_value/umax_value and rely on * dst_reg var_off to refine the result.

From: Felix Fietkau nbd@nbd.name

commit df16737d438f534d0cc9948c7c5158f1986c5c87 upstream.

The per-tid statistics need to be released after the call to rdev_get_station

Cc: stable@vger.kernel.org Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Felix Fietkau nbd@nbd.name Link: https://lore.kernel.org/r/20200108170630.33680-2-nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -10305,6 +10305,7 @@ static int cfg80211_cqm_rssi_update(stru if (err) return err;

+ cfg80211_sinfo_release_content(&sinfo); if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_BEACON_SIGNAL_AVG)) wdev->cqm_config->last_rssi_event_value = (s8) sinfo.rx_beacon_signal_avg;

From: Cong Wang xiyou.wangcong@gmail.com

commit c120959387efa51479056fd01dc90adfba7a590c upstream.

map->members is freed by ip_set_free() right before using it in mtype_ext_cleanup() again. So we just have to move it down.

Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function") Acked-by: Jozsef Kadlecsik kadlec@netfilter.org Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/netfilter/ipset/ip_set_bitmap_gen.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/ipset/ip_set_bitmap_gen.h +++ b/net/netfilter/ipset/ip_set_bitmap_gen.h @@ -64,9 +64,9 @@ mtype_destroy(struct ip_set *set) if (SET_WITH_TIMEOUT(set)) del_timer_sync(&map->gc);

- ip_set_free(map->members); if (set->dsize && set->extensions & IPSET_EXT_DESTROY) mtype_ext_cleanup(set); + ip_set_free(map->members); ip_set_free(map);

set->data = NULL;

From: Florian Westphal fw@strlen.de

commit 1c702bf902bd37349f6d91cd7f4b372b1e46d0ed upstream.

else we get null deref when one of the attributes is missing, both must be non-null.

Reported-by: syzbot+76d0b80493ac881ff77b@syzkaller.appspotmail.com Fixes: aaecfdb5c5dd8ba ("netfilter: nf_tables: match on tunnel metadata") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/netfilter/nft_tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/nft_tunnel.c +++ b/net/netfilter/nft_tunnel.c @@ -56,7 +56,7 @@ static int nft_tunnel_get_init(const str struct nft_tunnel *priv = nft_expr_priv(expr); u32 len;

- if (!tb[NFTA_TUNNEL_KEY] && + if (!tb[NFTA_TUNNEL_KEY] || !tb[NFTA_TUNNEL_DREG]) return -EINVAL;

From: Pablo Neira Ayuso pablo@netfilter.org

commit ec7470b834fe7b5d7eff11b6677f5d7fdf5e9a91 upstream.

This patch fixes a WARN_ON in nft_set_destroy() due to missing set reference count drop from the preparation phase. This is triggered by the module autoload path. Do not exercise the abort path from nft_request_module() while preparation phase cleaning up is still pending.

WARNING: CPU: 3 PID: 3456 at net/netfilter/nf_tables_api.c:3740 nft_set_destroy+0x45/0x50 [nf_tables] [...] CPU: 3 PID: 3456 Comm: nft Not tainted 5.4.6-arch3-1 #1 RIP: 0010:nft_set_destroy+0x45/0x50 [nf_tables] Code: e8 30 eb 83 c6 48 8b 85 80 00 00 00 48 8b b8 90 00 00 00 e8 dd 6b d7 c5 48 8b 7d 30 e8 24 dd eb c5 48 89 ef 5d e9 6b c6 e5 c5 <0f> 0b c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 7f 10 e9 52 RSP: 0018:ffffac4f43e53700 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff99d63a154d80 RCX: 0000000001f88e03 RDX: 0000000001f88c03 RSI: ffff99d6560ef0c0 RDI: ffff99d63a101200 RBP: ffff99d617721de0 R08: 0000000000000000 R09: 0000000000000318 R10: 00000000f0000000 R11: 0000000000000001 R12: ffffffff880fabf0 R13: dead000000000122 R14: dead000000000100 R15: ffff99d63a154d80 FS: 00007ff3dbd5b740(0000) GS:ffff99d6560c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00001cb5de6a9000 CR3: 000000016eb6a004 CR4: 00000000001606e0 Call Trace: __nf_tables_abort+0x3e3/0x6d0 [nf_tables] nft_request_module+0x6f/0x110 [nf_tables] nft_expr_type_request_module+0x28/0x50 [nf_tables] nf_tables_expr_parse+0x198/0x1f0 [nf_tables] nft_expr_init+0x3b/0xf0 [nf_tables] nft_dynset_init+0x1e2/0x410 [nf_tables] nf_tables_newrule+0x30a/0x930 [nf_tables] nfnetlink_rcv_batch+0x2a0/0x640 [nfnetlink] nfnetlink_rcv+0x125/0x171 [nfnetlink] netlink_unicast+0x179/0x210 netlink_sendmsg+0x208/0x3d0 sock_sendmsg+0x5e/0x60 ____sys_sendmsg+0x21b/0x290

Update comment on the code to describe the new behaviour.

Reported-by: Marco Oliverio marco.oliverio@tanaza.com Fixes: 452238e8d5ff ("netfilter: nf_tables: add and use helper for module autoload") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/netfilter/nf_tables_api.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -485,23 +485,21 @@ __nf_tables_chain_type_lookup(const stru }

/* - * Loading a module requires dropping mutex that guards the - * transaction. - * We first need to abort any pending transactions as once - * mutex is unlocked a different client could start a new - * transaction. It must not see any 'future generation' - * changes * as these changes will never happen. + * Loading a module requires dropping mutex that guards the transaction. + * A different client might race to start a new transaction meanwhile. Zap the + * list of pending transaction and then restore it once the mutex is grabbed + * again. Users of this function return EAGAIN which implicitly triggers the + * transaction abort path to clean up the list of pending transactions. */ #ifdef CONFIG_MODULES -static int __nf_tables_abort(struct net *net); - static void nft_request_module(struct net *net, const char *fmt, ...) { char module_name[MODULE_NAME_LEN]; + LIST_HEAD(commit_list); va_list args; int ret;

- __nf_tables_abort(net); + list_splice_init(&net->nft.commit_list, &commit_list);

va_start(args, fmt); ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args); @@ -512,6 +510,9 @@ static void nft_request_module(struct ne mutex_unlock(&net->nft.commit_mutex); request_module("%s", module_name); mutex_lock(&net->nft.commit_mutex); + + WARN_ON_ONCE(!list_empty(&net->nft.commit_list)); + list_splice(&commit_list, &net->nft.commit_list); } #endif

From: Johan Hovold johan@kernel.org

commit a112adafcb47760feff959ee1ecd10b74d2c5467 upstream.

The driver was doing a synchronous uninterruptible bulk-transfer without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus.

An arbitrary limit of five seconds should be more than enough.

Fixes: dbafc28955fa ("NFC: pn533: don't send USB data off of the stack") Signed-off-by: Johan Hovold johan@kernel.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/nfc/pn533/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -403,7 +403,7 @@ static int pn533_acr122_poweron_rdr(stru cmd, sizeof(cmd), false);

rc = usb_bulk_msg(phy->udev, phy->out_urb->pipe, buffer, sizeof(cmd), - &transferred, 0); + &transferred, 5000); kfree(buffer); if (rc || (transferred != sizeof(cmd))) { nfc_err(&phy->udev->dev,

From: Eric Dumazet edumazet@google.com

[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ]

I missed the fact that macvlan_broadcast() can be used both in RX and TX.

skb_eth_hdr() makes only sense in TX paths, so we can not use it blindly in macvlan_broadcast()

Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: Jurgen Van Ham juvanham@gmail.com Tested-by: Matteo Croce mcroce@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/macvlan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 41c0a3b55bfb..277bbff53cff 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -263,7 +263,7 @@ static void macvlan_broadcast(struct sk_buff *skb, struct net_device *src, enum macvlan_mode mode) { - const struct ethhdr *eth = skb_eth_hdr(skb); + const struct ethhdr *eth = eth_hdr(skb); const struct macvlan_dev *vlan; struct sk_buff *nskb; unsigned int i; @@ -517,10 +517,11 @@ static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev) const struct macvlan_dev *dest;

if (vlan->mode == MACVLAN_MODE_BRIDGE) { - const struct ethhdr *eth = (void *)skb->data; + const struct ethhdr *eth = skb_eth_hdr(skb);

/* send to other bridge ports directly */ if (is_multicast_ether_addr(eth->h_dest)) { + skb_reset_mac_header(skb); macvlan_broadcast(skb, port, dev, MACVLAN_MODE_BRIDGE); goto xmit_world; }

From: Alexander Lobakin alobakin@dlink.ru

[ Upstream commit bd5874da57edd001b35cf28ae737779498c16a56 ]

DSA subsystem takes care of netdev statistics since commit 4ed70ce9f01c ("net: dsa: Refactor transmit path to eliminate duplication"), so any accounting inside tagger callbacks is redundant and can lead to messing up the stats. This bug is present in Qualcomm tagger since day 0.

Fixes: cafdc45c949b ("net-next: dsa: add Qualcomm tag RX/TX handler") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Alexander Lobakin alobakin@dlink.ru Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/tag_qca.c | 3 --- 1 file changed, 3 deletions(-)

--- a/net/dsa/tag_qca.c +++ b/net/dsa/tag_qca.c @@ -41,9 +41,6 @@ static struct sk_buff *qca_tag_xmit(stru struct dsa_port *dp = dsa_slave_to_port(dev); u16 *phdr, hdr;

- dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - if (skb_cow_head(skb, 0) < 0) return NULL;

From: Eric Dumazet edumazet@google.com

[ Upstream commit f8d7408a4d7f60f8b2df0f81decdc882dd9c20dc ]

lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted.

Pierre-Francois reported various hangs when/if TSO is enabled.

For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets.

Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: RENARD Pierre-Francois pfrenard@gmail.com Tested-by: RENARD Pierre-Francois pfrenard@gmail.com Cc: Stefan Wahren stefan.wahren@i2se.com Cc: Woojung Huh woojung.huh@microchip.com Cc: Microchip Linux Driver Support UNGLinuxDriver@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/lan78xx.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3769,6 +3769,7 @@ static int lan78xx_probe(struct usb_inte

/* MTU range: 68 - 9000 */ netdev->max_mtu = MAX_SINGLE_PACKET_SIZE; + netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);

dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0; dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;

From: Vladis Dronov vdronov@redhat.com

[ Upstream commit 75718584cb3c64e6269109d4d54f888ac5a5fd15 ]

There is a bug in ptp_clock_unregister(), where ptp_cleanup_pin_groups() first frees ptp->pin_{,dev_}attr, but then posix_clock_unregister() needs them to destroy a related sysfs device.

These functions can not be just swapped, as posix_clock_unregister() frees ptp which is needed in the ptp_cleanup_pin_groups(). Fix this by calling ptp_cleanup_pin_groups() in ptp_clock_release(), right before ptp is freed.

This makes this patch fix an UAF bug in a patch which fixes an UAF bug.

Reported-by: Antti Laakso antti.laakso@intel.com Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Link: https://lore.kernel.org/netdev/3d2bd09735dbdaf003585ca376b7c1e5b69a19bd.came... Signed-off-by: Vladis Dronov vdronov@redhat.com Acked-by: Richard Cochran richardcochran@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ptp/ptp_clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -179,6 +179,7 @@ static void ptp_clock_release(struct dev { struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev);

+ ptp_cleanup_pin_groups(ptp); mutex_destroy(&ptp->tsevq_mux); mutex_destroy(&ptp->pincfg_mux); ida_simple_remove(&ptp_clocks_map, ptp->index); @@ -315,9 +316,8 @@ int ptp_clock_unregister(struct ptp_cloc if (ptp->pps_source) pps_unregister_source(ptp->pps_source);

- ptp_cleanup_pin_groups(ptp); - posix_clock_unregister(&ptp->clock); + return 0; } EXPORT_SYMBOL(ptp_clock_unregister);

From: Pengcheng Yang yangpc@wangsu.com

[ Upstream commit e176b1ba476cf36f723cfcc7a9e57f3cb47dec70 ]

When the packet pointed to by retransmit_skb_hint is unlinked by ACK, retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue(). If packet loss is detected at this time, retransmit_skb_hint will be set to point to the current packet loss in tcp_verify_retransmit_hint(), then the packets that were previously marked lost but not retransmitted due to the restriction of cwnd will be skipped and cannot be retransmitted.

To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can be reset only after all marked lost packets are retransmitted (retrans_out >= lost_out), otherwise we need to traverse from tcp_rtx_queue_head in tcp_xmit_retransmit_queue().

Packetdrill to demonstrate:

// Disable RACK and set max_reordering to keep things simple 0 `sysctl -q net.ipv4.tcp_recovery=0` +0 `sysctl -q net.ipv4.tcp_max_reordering=3`

// Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0

+.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4

// Send 8 data segments +0 write(4, ..., 8000) = 8000 +0 > P. 1:8001(8000) ack 1

// Enter recovery and 1:3001 is marked lost +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop>

// Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001 +0 > . 1:1001(1000) ack 1

// 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop> // Now retransmit_skb_hint points to 4001:5001 which is now marked lost

// BUG: 2001:3001 was not retransmitted +0 > . 2001:3001(1000) ack 1

Signed-off-by: Pengcheng Yang yangpc@wangsu.com Acked-by: Neal Cardwell ncardwell@google.com Tested-by: Neal Cardwell ncardwell@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp_input.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -901,9 +901,10 @@ static void tcp_check_sack_reordering(st /* This must be called before lost_out is incremented */ static void tcp_verify_retransmit_hint(struct tcp_sock *tp, struct sk_buff *skb) { - if (!tp->retransmit_skb_hint || - before(TCP_SKB_CB(skb)->seq, - TCP_SKB_CB(tp->retransmit_skb_hint)->seq)) + if ((!tp->retransmit_skb_hint && tp->retrans_out >= tp->lost_out) || + (tp->retransmit_skb_hint && + before(TCP_SKB_CB(skb)->seq, + TCP_SKB_CB(tp->retransmit_skb_hint)->seq))) tp->retransmit_skb_hint = skb; }

From: Petr Machata petrm@mellanox.com

commit ca7609ff3680c51d6c29897f3117aa2ad904f92a upstream.

Per-port counter cache used by Qdiscs is updated periodically, unless the port is down. The fact that the cache is not updated for down ports is no problem for most counters, which are relative in nature. However, backlog is absolute in nature, and if there is a non-zero value in the cache around the time that the port goes down, that value just stays there. This value then leaks to offloaded Qdiscs that report non-zero backlog even if there (obviously) is no traffic.

The HW does not keep backlog of a downed port, so do likewise: as the port goes down, wipe the backlog value from xstats.

Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically") Signed-off-by: Petr Machata petrm@mellanox.com Acked-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -1061,6 +1061,9 @@ static void update_stats_cache(struct wo periodic_hw_stats.update_dw.work);

if (!netif_carrier_ok(mlxsw_sp_port->dev)) + /* Note: mlxsw_sp_port_down_wipe_counters() clears the cache as + * necessary when port goes down. + */ goto out;

mlxsw_sp_port_get_hw_stats(mlxsw_sp_port->dev, @@ -3309,6 +3312,15 @@ static int mlxsw_sp_port_unsplit(struct return 0; }

+static void +mlxsw_sp_port_down_wipe_counters(struct mlxsw_sp_port *mlxsw_sp_port) +{ + int i; + + for (i = 0; i < TC_MAX_QUEUE; i++) + mlxsw_sp_port->periodic_hw_stats.xstats.backlog[i] = 0; +} + static void mlxsw_sp_pude_event_func(const struct mlxsw_reg_info *reg, char *pude_pl, void *priv) { @@ -3329,6 +3341,7 @@ static void mlxsw_sp_pude_event_func(con } else { netdev_info(mlxsw_sp_port->dev, "link down\n"); netif_carrier_off(mlxsw_sp_port->dev); + mlxsw_sp_port_down_wipe_counters(mlxsw_sp_port); } }

From: Nathan Chancellor natechancellor@gmail.com

commit 589b72894f53124a39d1bb3c0cecaf9dcabac417 upstream.

Clang warns:

../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] nr_parts = PARTS_PER_DISK; ^ ../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here if (err) ^

This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns.

While we are here, the previous line has some trailing whitespace; clean that up as well.

Fixes: c80a420995e7 ("xen-blkfront: handle Xen major numbers other than XENVBD") Link: https://github.com/ClangBuiltLinux/linux/issues/791 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Reviewed-by: Juergen Gross jgross@suse.com Acked-by: Roger Pau Monné roger.pau@citrix.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1113,8 +1113,8 @@ static int xlvbd_alloc_gendisk(blkif_sec if (!VDEV_IS_EXTENDED(info->vdevice)) { err = xen_translate_vdev(info->vdevice, &minor, &offset); if (err) - return err; - nr_parts = PARTS_PER_DISK; + return err; + nr_parts = PARTS_PER_DISK; } else { minor = BLKIF_MINOR_EXT(info->vdevice); nr_parts = PARTS_PER_EXT_DISK;

From: Jonathan Neuschäfer j.neuschaefer@gmx.net

commit 0149385537e6d36f535fcd83cfcabf83a32f0836 upstream.

Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu.

Fixes: 8237f8bc4f6e ("irqchip: add a SiFive PLIC driver") Signed-off-by: Jonathan Neuschäfer j.neuschaefer@gmx.net Signed-off-by: Marc Zyngier maz@kernel.org Reviewed-by: Palmer Dabbelt palmer@sifive.com Acked-by: Palmer Dabbelt palmer@sifive.com Link: https://lore.kernel.org/r/20191002144452.10178-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/irqchip/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -371,8 +371,6 @@ config QCOM_PDC Power Domain Controller driver to manage and configure wakeup IRQs for Qualcomm Technologies Inc (QTI) mobile chips.

-endmenu - config SIFIVE_PLIC bool "SiFive Platform-Level Interrupt Controller" depends on RISCV @@ -384,3 +382,5 @@ config SIFIVE_PLIC interrupt sources are subordinate to the PLIC.

If you don't know what to do here, say Y. + +endmenu

From: Christian Hewitt christianshewitt@gmail.com

commit d5f6fa904ecbadbb8e9fa6302b0fc165bec0559a upstream.

Fix DTC warnings:

arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@

gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>;

- button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;

From: Eric Dumazet edumazet@google.com

commit de95a991bb72e009f47e0c4bbc90fc5f594588d5 upstream.

syzbot (KCSAN) reported a data-race in tick_do_update_jiffies64():

BUG: KCSAN: data-race in tick_do_update_jiffies64 / tick_do_update_jiffies64

write to 0xffffffff8603d008 of 8 bytes by interrupt on cpu 1: tick_do_update_jiffies64+0x100/0x250 kernel/time/tick-sched.c:73 tick_sched_do_timer+0xd4/0xe0 kernel/time/tick-sched.c:138 tick_sched_timer+0x43/0xe0 kernel/time/tick-sched.c:1292 __run_hrtimer kernel/time/hrtimer.c:1514 [inline] __hrtimer_run_queues+0x274/0x5f0 kernel/time/hrtimer.c:1576 hrtimer_interrupt+0x22a/0x480 kernel/time/hrtimer.c:1638 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1110 [inline] smp_apic_timer_interrupt+0xdc/0x280 arch/x86/kernel/apic/apic.c:1135 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 arch_local_irq_restore arch/x86/include/asm/paravirt.h:756 [inline] kcsan_setup_watchpoint+0x1d4/0x460 kernel/kcsan/core.c:436 check_access kernel/kcsan/core.c:466 [inline] __tsan_read1 kernel/kcsan/core.c:593 [inline] __tsan_read1+0xc2/0x100 kernel/kcsan/core.c:593 kallsyms_expand_symbol.constprop.0+0x70/0x160 kernel/kallsyms.c:79 kallsyms_lookup_name+0x7f/0x120 kernel/kallsyms.c:170 insert_report_filterlist kernel/kcsan/debugfs.c:155 [inline] debugfs_write+0x14b/0x2d0 kernel/kcsan/debugfs.c:256 full_proxy_write+0xbd/0x100 fs/debugfs/file.c:225 __vfs_write+0x67/0xc0 fs/read_write.c:494 vfs_write fs/read_write.c:558 [inline] vfs_write+0x18a/0x390 fs/read_write.c:542 ksys_write+0xd5/0x1b0 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x4c/0x60 fs/read_write.c:620 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffffffff8603d008 of 8 bytes by task 0 on cpu 0: tick_do_update_jiffies64+0x2b/0x250 kernel/time/tick-sched.c:62 tick_nohz_update_jiffies kernel/time/tick-sched.c:505 [inline] tick_nohz_irq_enter kernel/time/tick-sched.c:1257 [inline] tick_irq_enter+0x139/0x1c0 kernel/time/tick-sched.c:1274 irq_enter+0x4f/0x60 kernel/softirq.c:354 entering_irq arch/x86/include/asm/apic.h:517 [inline] entering_ack_irq arch/x86/include/asm/apic.h:523 [inline] smp_apic_timer_interrupt+0x55/0x280 arch/x86/kernel/apic/apic.c:1133 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:60 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Use READ_ONCE() and WRITE_ONCE() to annotate this expected race.

Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/r/20191205045619.204946-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/time/tick-sched.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -61,8 +61,9 @@ static void tick_do_update_jiffies64(kti

/* * Do a quick check without holding jiffies_lock: + * The READ_ONCE() pairs with two updates done later in this function. */ - delta = ktime_sub(now, last_jiffies_update); + delta = ktime_sub(now, READ_ONCE(last_jiffies_update)); if (delta < tick_period) return;

@@ -73,8 +74,9 @@ static void tick_do_update_jiffies64(kti if (delta >= tick_period) {

delta = ktime_sub(delta, tick_period); - last_jiffies_update = ktime_add(last_jiffies_update, - tick_period); + /* Pairs with the lockless read in this function. */ + WRITE_ONCE(last_jiffies_update, + ktime_add(last_jiffies_update, tick_period));

/* Slow path for long timeouts */ if (unlikely(delta >= tick_period)) { @@ -82,8 +84,10 @@ static void tick_do_update_jiffies64(kti

ticks = ktime_divns(delta, incr);

- last_jiffies_update = ktime_add_ns(last_jiffies_update, - incr * ticks); + /* Pairs with the lockless read in this function. */ + WRITE_ONCE(last_jiffies_update, + ktime_add_ns(last_jiffies_update, + incr * ticks)); } do_timer(++ticks);

From: Sudeep Holla sudeep.holla@arm.com

commit 54fb3fe0f211d4729a2551cf9497bd612189af9d upstream.

This reverts commit 193d00a2b35ee3353813b4006a18131122087205.

Commit 951d48855d86 ("of: Make of_dma_get_range() work on bus nodes") reworked the logic such that of_dma_get_range() works correctly starting from a bus node containing "dma-ranges".

Since on Juno we don't have a SoC level bus node and "dma-ranges" is present only in the root node, we get the following error:

OF: translation of DMA address(0) to CPU address failed node(/sram@2e000000) OF: translation of DMA address(0) to CPU address failed node(/uart@7ff80000) ... OF: translation of DMA address(0) to CPU address failed node(/mhu@2b1f0000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)

So let's fix it by dropping the "dma-ranges" property for now. This should be fine since it doesn't represent any kind of device-visible restriction; it was only there for completeness, and we've since given in to the assumption that missing "dma-ranges" implies a 1:1 mapping anyway.

We can add it later with a proper SoC bus node and moving all the devices that belong there along with the "dma-ranges" if required.

Fixes: 193d00a2b35e ("arm64: dts: juno: add dma-ranges property") Cc: Rob Herring robh+dt@kernel.org Cc: Liviu Dudau liviu.dudau@arm.com Cc: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Robin Murphy robin.murphy@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/boot/dts/arm/juno-base.dtsi | 1 - 1 file changed, 1 deletion(-)

--- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -6,7 +6,6 @@ /* * Devices shared by all Juno boards */ - dma-ranges = <0 0 0 0 0x100 0>;

memtimer: timer@2a810000 { compatible = "arm,armv7-timer-mem";

From: Jon Derrick jonathan.derrick@intel.com

commit 307a312df9c43fdea286ad17f748aaf777cc434a upstream.

Check bar1's new vmm creation return value for errors.

Signed-off-by: Jon Derrick jonathan.derrick@intel.com Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sushma Kalakota sushmax.kalakota@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c @@ -174,6 +174,8 @@ nv50_bar_oneinit(struct nvkm_bar *base)

ret = nvkm_vmm_new(device, start, limit-- - start, NULL, 0, &bar1_lock, "bar1", &bar->bar1_vmm); + if (ret) + return ret;

atomic_inc(&bar->bar1_vmm->engref[NVKM_SUBDEV_BAR]); bar->bar1_vmm->debug = bar->base.subdev.debug;

From: Jon Derrick jonathan.derrick@intel.com

commit 15516bf9abaa41421a6ded79a5a2fee86f9594e5 upstream.

If the BAR initialization failed it may leave the vmm structure in an unitialized state, leading to a null-pointer-dereference when the vmm is dereferenced during teardown.

Signed-off-by: Jon Derrick jonathan.derrick@intel.com Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sushma Kalakota sushmax.kalakota@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c @@ -1423,7 +1423,7 @@ nvkm_vmm_get(struct nvkm_vmm *vmm, u8 pa void nvkm_vmm_part(struct nvkm_vmm *vmm, struct nvkm_memory *inst) { - if (inst && vmm->func->part) { + if (inst && vmm && vmm->func->part) { mutex_lock(&vmm->mutex); vmm->func->part(vmm, inst); mutex_unlock(&vmm->mutex);

From: Dan Carpenter dan.carpenter@oracle.com

commit 906ca6353ac09696c1bf0892513c8edffff5e0a6 upstream.

This error path is missing an unlock.

Fixes: 26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver") Link: https://lore.kernel.org/r/20191022102324.GA27540@mwanda Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/esas2r/esas2r_flash.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/scsi/esas2r/esas2r_flash.c +++ b/drivers/scsi/esas2r/esas2r_flash.c @@ -1197,6 +1197,7 @@ bool esas2r_nvram_read_direct(struct esa if (!esas2r_read_flash_block(a, a->nvram, FLS_OFFSET_NVR, sizeof(struct esas2r_sas_nvram))) { esas2r_hdebug("NVRAM read failed, using defaults"); + up(&a->nvram_semaphore); return false; }

From: Pan Bian bianpan2016@163.com

commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 upstream.

The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues.

Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.... Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -915,12 +915,12 @@ void bnx2i_free_hba(struct bnx2i_hba *hb INIT_LIST_HEAD(&hba->ep_ofld_list); INIT_LIST_HEAD(&hba->ep_active_list); INIT_LIST_HEAD(&hba->ep_destroy_list); - pci_dev_put(hba->pcidev);

if (hba->regview) { pci_iounmap(hba->pcidev, hba->regview); hba->regview = NULL; } + pci_dev_put(hba->pcidev); bnx2i_free_mp_bdt(hba); bnx2i_release_free_cid_que(hba); iscsi_host_free(shost);

From: Huacai Chen chenhc@lemote.com

commit 45dc8f2d9c94ed74a5e31e63e9136a19a7e16081 upstream.

Commit 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/ pci_free_irq_vectors calls.") use pci_alloc_irq_vectors() to replace pci_enable_msi() but it didn't handle the return value correctly. This bug make qla2x00 always fail to setup MSI if MSI-X fail, so fix it.

BTW, improve the log message of return value in qla2x00_request_irqs() to avoid confusion.

Fixes: 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.") Cc: Michael Hernandez michael.hernandez@cavium.com Link: https://lore.kernel.org/r/1574314847-14280-1-git-send-email-chenhc@lemote.co... Signed-off-by: Huacai Chen chenhc@lemote.com Acked-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/qla2xxx/qla_isr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3573,7 +3573,7 @@ qla2x00_request_irqs(struct qla_hw_data skip_msix:

ql_log(ql_log_info, vha, 0x0037, - "Falling back-to MSI mode -%d.\n", ret); + "Falling back-to MSI mode -- ret=%d.\n", ret);

if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) && !IS_QLA8001(ha) && !IS_P3P_TYPE(ha) && !IS_QLAFX00(ha) && @@ -3581,13 +3581,13 @@ skip_msix: goto skip_msi;

ret = pci_alloc_irq_vectors(ha->pdev, 1, 1, PCI_IRQ_MSI); - if (!ret) { + if (ret > 0) { ql_dbg(ql_dbg_init, vha, 0x0038, "MSI: Enabled.\n"); ha->flags.msi_enabled = 1; } else ql_log(ql_log_warn, vha, 0x0039, - "Falling back-to INTa mode -- %d.\n", ret); + "Falling back-to INTa mode -- ret=%d.\n", ret); skip_msi:

/* Skip INTx on ISP82xx. */

From: Bart Van Assche bvanassche@acm.org

commit b1335f5b0486f61fb66b123b40f8e7a98e49605d upstream.

This patch fixes an unintended sign extension on left shifts. From Colin King: "Shifting a u8 left will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an u64 will sign extend the value causing the upper 32 bits to be set in the result."

Fix this by using get_unaligned_be*() instead.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig hch@lst.de Cc: Hannes Reinecke hare@suse.com Cc: Douglas Gilbert dgilbert@interlog.com Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.org Reported-by: Colin Ian King colin.king@canonical.com Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/scsi_trace.c | 103 ++++++++++++---------------------------------- 1 file changed, 28 insertions(+), 75 deletions(-)

--- a/drivers/scsi/scsi_trace.c +++ b/drivers/scsi/scsi_trace.c @@ -21,7 +21,7 @@ #include <trace/events/scsi.h>

#define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f) -#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9]) +#define SERVICE_ACTION32(cdb) (get_unaligned_be16(&cdb[8]))

static const char * scsi_trace_misc(struct trace_seq *, unsigned char *, int); @@ -51,17 +51,12 @@ static const char * scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p); - sector_t lba = 0, txlen = 0; + u32 lba, txlen;

- lba |= (cdb[2] << 24); - lba |= (cdb[3] << 16); - lba |= (cdb[4] << 8); - lba |= cdb[5]; - txlen |= (cdb[7] << 8); - txlen |= cdb[8]; + lba = get_unaligned_be32(&cdb[2]); + txlen = get_unaligned_be16(&cdb[7]);

- trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", - (unsigned long long)lba, (unsigned long long)txlen, + trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen, cdb[1] >> 5);

if (cdb[0] == WRITE_SAME) @@ -76,19 +71,12 @@ static const char * scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p); - sector_t lba = 0, txlen = 0; + u32 lba, txlen;

- lba |= (cdb[2] << 24); - lba |= (cdb[3] << 16); - lba |= (cdb[4] << 8); - lba |= cdb[5]; - txlen |= (cdb[6] << 24); - txlen |= (cdb[7] << 16); - txlen |= (cdb[8] << 8); - txlen |= cdb[9]; + lba = get_unaligned_be32(&cdb[2]); + txlen = get_unaligned_be32(&cdb[6]);

- trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", - (unsigned long long)lba, (unsigned long long)txlen, + trace_seq_printf(p, "lba=%u txlen=%u protect=%u", lba, txlen, cdb[1] >> 5); trace_seq_putc(p, 0);

@@ -99,23 +87,13 @@ static const char * scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p); - sector_t lba = 0, txlen = 0; + u64 lba; + u32 txlen;

- lba |= ((u64)cdb[2] << 56); - lba |= ((u64)cdb[3] << 48); - lba |= ((u64)cdb[4] << 40); - lba |= ((u64)cdb[5] << 32); - lba |= (cdb[6] << 24); - lba |= (cdb[7] << 16); - lba |= (cdb[8] << 8); - lba |= cdb[9]; - txlen |= (cdb[10] << 24); - txlen |= (cdb[11] << 16); - txlen |= (cdb[12] << 8); - txlen |= cdb[13]; + lba = get_unaligned_be64(&cdb[2]); + txlen = get_unaligned_be32(&cdb[10]);

- trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", - (unsigned long long)lba, (unsigned long long)txlen, + trace_seq_printf(p, "lba=%llu txlen=%u protect=%u", lba, txlen, cdb[1] >> 5);

if (cdb[0] == WRITE_SAME_16) @@ -130,8 +108,8 @@ static const char * scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p), *cmd; - sector_t lba = 0, txlen = 0; - u32 ei_lbrt = 0; + u64 lba; + u32 ei_lbrt, txlen;

switch (SERVICE_ACTION32(cdb)) { case READ_32: @@ -151,26 +129,12 @@ scsi_trace_rw32(struct trace_seq *p, uns goto out; }

- lba |= ((u64)cdb[12] << 56); - lba |= ((u64)cdb[13] << 48); - lba |= ((u64)cdb[14] << 40); - lba |= ((u64)cdb[15] << 32); - lba |= (cdb[16] << 24); - lba |= (cdb[17] << 16); - lba |= (cdb[18] << 8); - lba |= cdb[19]; - ei_lbrt |= (cdb[20] << 24); - ei_lbrt |= (cdb[21] << 16); - ei_lbrt |= (cdb[22] << 8); - ei_lbrt |= cdb[23]; - txlen |= (cdb[28] << 24); - txlen |= (cdb[29] << 16); - txlen |= (cdb[30] << 8); - txlen |= cdb[31]; - - trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu protect=%u ei_lbrt=%u", - cmd, (unsigned long long)lba, - (unsigned long long)txlen, cdb[10] >> 5, ei_lbrt); + lba = get_unaligned_be64(&cdb[12]); + ei_lbrt = get_unaligned_be32(&cdb[20]); + txlen = get_unaligned_be32(&cdb[28]); + + trace_seq_printf(p, "%s_32 lba=%llu txlen=%u protect=%u ei_lbrt=%u", + cmd, lba, txlen, cdb[10] >> 5, ei_lbrt);

if (SERVICE_ACTION32(cdb) == WRITE_SAME_32) trace_seq_printf(p, " unmap=%u", cdb[10] >> 3 & 1); @@ -185,7 +149,7 @@ static const char * scsi_trace_unmap(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p); - unsigned int regions = cdb[7] << 8 | cdb[8]; + unsigned int regions = get_unaligned_be16(&cdb[7]);

trace_seq_printf(p, "regions=%u", (regions - 8) / 16); trace_seq_putc(p, 0); @@ -197,8 +161,8 @@ static const char * scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len) { const char *ret = trace_seq_buffer_ptr(p), *cmd; - sector_t lba = 0; - u32 alloc_len = 0; + u64 lba; + u32 alloc_len;

switch (SERVICE_ACTION16(cdb)) { case SAI_READ_CAPACITY_16: @@ -212,21 +176,10 @@ scsi_trace_service_action_in(struct trac goto out; }

- lba |= ((u64)cdb[2] << 56); - lba |= ((u64)cdb[3] << 48); - lba |= ((u64)cdb[4] << 40); - lba |= ((u64)cdb[5] << 32); - lba |= (cdb[6] << 24); - lba |= (cdb[7] << 16); - lba |= (cdb[8] << 8); - lba |= cdb[9]; - alloc_len |= (cdb[10] << 24); - alloc_len |= (cdb[11] << 16); - alloc_len |= (cdb[12] << 8); - alloc_len |= cdb[13]; + lba = get_unaligned_be64(&cdb[2]); + alloc_len = get_unaligned_be32(&cdb[10]);

- trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd, - (unsigned long long)lba, alloc_len); + trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd, lba, alloc_len);

out: trace_seq_putc(p, 0);

From: Baolin Wang baolin.wang@linaro.org

commit 9629dbdabd1983ef53f125336e1d62d77b1620f9 upstream.

The syscon_regmap_lookup_by_phandle() will never return NULL, thus use IS_ERR() to validate the return value instead of IS_ERR_OR_NULL().

Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Baolin Wang baolin.wang@linaro.org Link: https://lkml.kernel.org/r/1995139bee5248ff3e9d46dc715968f212cfc4cc.157052026... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/clk/sprd/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/sprd/common.c +++ b/drivers/clk/sprd/common.c @@ -45,7 +45,7 @@ int sprd_clk_regmap_init(struct platform

if (of_find_property(node, "sprd,syscon", NULL)) { regmap = syscon_regmap_lookup_by_phandle(node, "sprd,syscon"); - if (IS_ERR_OR_NULL(regmap)) { + if (IS_ERR(regmap)) { pr_err("%s: failed to get syscon regmap\n", __func__); return PTR_ERR(regmap); }

From: Eddie James eajames@linux.ibm.com

commit 9861ff954c7e83e2f738ce16fbe15f8a1e121771 upstream.

Since i2c_smbus functions can sleep, the brightness setting function for this driver must be the blocking version to avoid scheduling while atomic.

Signed-off-by: Eddie James eajames@linux.ibm.com Link: https://lore.kernel.org/r/20191106200106.29519-2-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/hwmon/pmbus/ibm-cffps.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -269,8 +269,8 @@ static int ibm_cffps_read_word_data(stru return rc; }

-static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) +static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { int rc; struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led); @@ -286,9 +286,11 @@ static void ibm_cffps_led_brightness_set rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD, psu->led_state); if (rc < 0) - return; + return rc;

led_cdev->brightness = brightness; + + return 0; }

static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev, @@ -324,7 +326,7 @@ static void ibm_cffps_create_led_class(s client->addr); psu->led.name = psu->led_name; psu->led.max_brightness = LED_FULL; - psu->led.brightness_set = ibm_cffps_led_brightness_set; + psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set; psu->led.blink_set = ibm_cffps_led_blink_set;

rc = devm_led_classdev_register(dev, &psu->led);