From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit d2139dfca361a1f5bfc4d4a23455b1a409a69cd4 ]
The byte at offset 6 represents length. Don't take it and drop it immediately by using proper accessor, i.e. get_unaligned_be24().
[JD: Change the subject to something less frightening]
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Jean Delvare jdelvare@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/dmi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index d51ca0428bb82..bd43277dbb878 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -629,7 +629,7 @@ static int __init dmi_smbios3_present(const u8 *buf) { if (memcmp(buf, "_SM3_", 5) == 0 && buf[6] < 32 && dmi_checksum(buf, buf[6])) { - dmi_ver = get_unaligned_be32(buf + 6) & 0xFFFFFF; + dmi_ver = get_unaligned_be24(buf + 7); dmi_num = 0; /* No longer specified */ dmi_len = get_unaligned_le32(buf + 12); dmi_base = get_unaligned_le64(buf + 16);
From: Tony Battersby tonyb@cybernetics.com
[ Upstream commit 53661ded2460b414644532de6b99bd87f71987e9 ]
This partially reverts commit d2b292c3f6fd ("scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX")
For some workloads where the host sends a batch of commands and then pauses, ATIO interrupt coalesce can cause some incoming ATIO entries to be ignored for extended periods of time, resulting in slow performance, timeouts, and aborted commands.
Disable interrupt coalesce and re-enable the dedicated ATIO MSI-X interrupt.
Link: https://lore.kernel.org/r/97dcf365-89ff-014d-a3e5-1404c6af511c@cybernetics.c... Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Reviewed-by: Nilesh Javali njavali@marvell.com Signed-off-by: Tony Battersby tonyb@cybernetics.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_target.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index ba823e8eb902b..ecb30c2738b8b 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6817,14 +6817,8 @@ qlt_24xx_config_rings(struct scsi_qla_host *vha)
if (ha->flags.msix_enabled) { if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) { - if (IS_QLA2071(ha)) { - /* 4 ports Baker: Enable Interrupt Handshake */ - icb->msix_atio = 0; - icb->firmware_options_2 |= cpu_to_le32(BIT_26); - } else { - icb->msix_atio = cpu_to_le16(msix->entry); - icb->firmware_options_2 &= cpu_to_le32(~BIT_26); - } + icb->msix_atio = cpu_to_le16(msix->entry); + icb->firmware_options_2 &= cpu_to_le32(~BIT_26); ql_dbg(ql_dbg_init, vha, 0xf072, "Registering ICB vector 0x%x for atio que.\n", msix->entry);
From: Guixin Liu kanie@linux.alibaba.com
[ Upstream commit 8c499e49240bd93628368c3588975cfb94169b8b ]
When allocating log_to_span fails, kfree(instance->ctrl_context) is called twice. Remove redundant call.
Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alib... Acked-by: Sumit Saxena sumit.saxena@broadcom.com Signed-off-by: Guixin Liu kanie@linux.alibaba.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 13022a42fd6f4..7838c7911adde 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -5198,7 +5198,6 @@ megasas_alloc_fusion_context(struct megasas_instance *instance) if (!fusion->log_to_span) { dev_err(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__); - kfree(instance->ctrl_context); return -ENOMEM; } }
From: Jeffy Chen jeffy.chen@rock-chips.com
[ Upstream commit ea2aa97ca37a9044ade001aef71dbc06318e8d44 ]
Currently we are assuming a one to one mapping between dmabuf and GEM handle when releasing GEM handles.
But that is not always true, since we would create extra handles for the GEM obj in cases like gem_open() and getfb{,2}().
A similar issue was reported at: https://lore.kernel.org/all/20211105083308.392156-1-jay.xu@rock-chips.com/
Another problem is that the imported dmabuf might not always have gem_obj->dma_buf set, which would cause leaks in drm_gem_remove_prime_handles().
Let's fix these for now by using handle to find the exact map to remove.
Signed-off-by: Jeffy Chen jeffy.chen@rock-chips.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Christian König christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20220819072834.17888-1-jeffy.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_gem.c | 17 +---------------- drivers/gpu/drm/drm_internal.h | 4 ++-- drivers/gpu/drm/drm_prime.c | 20 ++++++++++++-------- 3 files changed, 15 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 5979af230eda0..8b30e8d83fbcf 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -166,21 +166,6 @@ void drm_gem_private_object_init(struct drm_device *dev, } EXPORT_SYMBOL(drm_gem_private_object_init);
-static void -drm_gem_remove_prime_handles(struct drm_gem_object *obj, struct drm_file *filp) -{ - /* - * Note: obj->dma_buf can't disappear as long as we still hold a - * handle reference in obj->handle_count. - */ - mutex_lock(&filp->prime.lock); - if (obj->dma_buf) { - drm_prime_remove_buf_handle_locked(&filp->prime, - obj->dma_buf); - } - mutex_unlock(&filp->prime.lock); -} - /** * drm_gem_object_handle_free - release resources bound to userspace handles * @obj: GEM object to clean up. @@ -254,7 +239,7 @@ drm_gem_object_release_handle(int id, void *ptr, void *data) else if (dev->driver->gem_close_object) dev->driver->gem_close_object(obj, file_priv);
- drm_gem_remove_prime_handles(obj, file_priv); + drm_prime_remove_buf_handle(&file_priv->prime, id); drm_vma_node_revoke(&obj->vma_node, file_priv);
drm_gem_object_handle_put_unlocked(obj); diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index b65865c630b0a..f80e0f28087d1 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -86,8 +86,8 @@ int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data,
void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv); void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv); -void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf); +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle);
/* drm_drv.c */ struct drm_minor *drm_minor_acquire(unsigned int minor_id); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 9f955f2010c25..825499ea3ff59 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -187,29 +187,33 @@ static int drm_prime_lookup_buf_handle(struct drm_prime_file_private *prime_fpri return -ENOENT; }
-void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf) +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle) { struct rb_node *rb;
- rb = prime_fpriv->dmabufs.rb_node; + mutex_lock(&prime_fpriv->lock); + + rb = prime_fpriv->handles.rb_node; while (rb) { struct drm_prime_member *member;
- member = rb_entry(rb, struct drm_prime_member, dmabuf_rb); - if (member->dma_buf == dma_buf) { + member = rb_entry(rb, struct drm_prime_member, handle_rb); + if (member->handle == handle) { rb_erase(&member->handle_rb, &prime_fpriv->handles); rb_erase(&member->dmabuf_rb, &prime_fpriv->dmabufs);
- dma_buf_put(dma_buf); + dma_buf_put(member->dma_buf); kfree(member); - return; - } else if (member->dma_buf < dma_buf) { + break; + } else if (member->handle < handle) { rb = rb->rb_right; } else { rb = rb->rb_left; } } + + mutex_unlock(&prime_fpriv->lock); }
void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv)
From: YiPeng Chai YiPeng.Chai@amd.com
[ Upstream commit 9d705d7741ae70764f3d6d87e67fad3b5c30ffd0 ]
V1: The amdgpu_xgmi_remove_device function will send unload command to psp through psp ring to terminate xgmi, but psp ring has been destroyed in psp_hw_fini.
V2: 1. Change the commit title. 2. Restore amdgpu_xgmi_remove_device to its original calling location. Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini.
Signed-off-by: YiPeng Chai YiPeng.Chai@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 3 +++ drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 2f47f81a74a57..ae84d3b582aa5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -2146,6 +2146,9 @@ static int psp_hw_fini(void *handle) psp_rap_terminate(psp); psp_dtm_terminate(psp); psp_hdcp_terminate(psp); + + if (adev->gmc.xgmi.num_physical_nodes > 1) + psp_xgmi_terminate(psp); }
psp_asd_unload(psp); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c index 042c85fc528bb..def0b7092438f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c @@ -622,7 +622,7 @@ int amdgpu_xgmi_remove_device(struct amdgpu_device *adev) amdgpu_put_xgmi_hive(hive); }
- return psp_xgmi_terminate(&adev->psp); + return 0; }
int amdgpu_xgmi_ras_late_init(struct amdgpu_device *adev)
From: Candice Li candice.li@amd.com
[ Upstream commit c351938350ab9b5e978dede2c321da43de7eb70c ]
No need to set up rb when no gfx rings.
Signed-off-by: Candice Li candice.li@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 405bb3efa2a96..38f4c7474487b 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2570,7 +2570,8 @@ static void gfx_v9_0_constants_init(struct amdgpu_device *adev)
gfx_v9_0_tiling_mode_table_init(adev);
- gfx_v9_0_setup_rb(adev); + if (adev->gfx.num_gfx_rings) + gfx_v9_0_setup_rb(adev); gfx_v9_0_get_cu_info(adev, &adev->gfx.cu_info); adev->gfx.config.db_debug2 = RREG32_SOC15(GC, 0, mmDB_DEBUG2);
From: Zhenneng Li lizhenneng@kylinos.cn
[ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ]
Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
Configuration and Message requests are the only TLPs accepted by a Function in the D3hot state. All other received Requests must be handled as Unsupported Requests, and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.
Acked-by: Christian König christian.koenig@amd.com Signed-off-by: Zhenneng Li lizhenneng@kylinos.cn Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 266e3cbbd09bd..8287410f471fb 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1623,6 +1623,9 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend, if (r) { /* delay GPU reset to resume */ radeon_fence_driver_force_completion(rdev, i); + } else { + /* finish executing delayed work */ + flush_delayed_work(&rdev->fence_drv[i].lockup_work); } }
From: Li Qiong liqiong@nfschina.com
[ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ]
As the possible failure of the kmalloc(), it should be better to fix this error path, check and return '-ENOMEM' error code.
Signed-off-by: Li Qiong liqiong@nfschina.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parisc/ccio-dma.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index b916fab9b1618..ffd5000c23d39 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1380,15 +1380,17 @@ ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr) } }
-static void __init ccio_init_resources(struct ioc *ioc) +static int __init ccio_init_resources(struct ioc *ioc) { struct resource *res = ioc->mmio_region; char *name = kmalloc(14, GFP_KERNEL); - + if (unlikely(!name)) + return -ENOMEM; snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low); ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv); + return 0; }
static int new_ioc_area(struct resource *res, unsigned long size, @@ -1543,7 +1545,10 @@ static int __init ccio_probe(struct parisc_device *dev) return -ENOMEM; } ccio_ioc_init(ioc); - ccio_init_resources(ioc); + if (ccio_init_resources(ioc)) { + kfree(ioc); + return -ENOMEM; + } hppa_dma_ops = &ccio_ops;
hba = kzalloc(sizeof(*hba), GFP_KERNEL);
From: Helge Deller deller@gmx.de
[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ]
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x machine is detected.
Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/head.S | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index aa93d775c34db..598d0938449da 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -22,7 +22,7 @@ #include <linux/init.h> #include <linux/pgtable.h>
- .level PA_ASM_LEVEL + .level 1.1
__INITDATA ENTRY(boot_args) @@ -69,6 +69,47 @@ $bss_loop: stw,ma %arg2,4(%r1) stw,ma %arg3,4(%r1)
+#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20) + /* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU + * and halt kernel if we detect a PA1.x CPU. */ + ldi 32,%r10 + mtctl %r10,%cr11 + .level 2.0 + mfctl,w %cr11,%r10 + .level 1.1 + comib,<>,n 0,%r10,$cpu_ok + + load32 PA(msg1),%arg0 + ldi msg1_end-msg1,%arg1 +$iodc_panic: + copy %arg0, %r10 + copy %arg1, %r11 + load32 PA(init_stack),%sp +#define MEM_CONS 0x3A0 + ldw MEM_CONS+32(%r0),%arg0 // HPA + ldi ENTRY_IO_COUT,%arg1 + ldw MEM_CONS+36(%r0),%arg2 // SPA + ldw MEM_CONS+8(%r0),%arg3 // layers + load32 PA(__bss_start),%r1 + stw %r1,-52(%sp) // arg4 + stw %r0,-56(%sp) // arg5 + stw %r10,-60(%sp) // arg6 = ptr to text + stw %r11,-64(%sp) // arg7 = len + stw %r0,-68(%sp) // arg8 + load32 PA(.iodc_panic_ret), %rp + ldw MEM_CONS+40(%r0),%r1 // ENTRY_IODC + bv,n (%r1) +.iodc_panic_ret: + b . /* wait endless with ... */ + or %r10,%r10,%r10 /* qemu idle sleep */ +msg1: .ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n" +msg1_end: + +$cpu_ok: +#endif + + .level PA_ASM_LEVEL + /* Initialize startup VM. Just map first 16/32 MB of memory */ load32 PA(swapper_pg_dir),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */
From: Sudeep Holla sudeep.holla@arm.com
[ Upstream commit e75d18cecbb3805895d8ed64da4f78575ec96043 ]
Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before.
Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level.
It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value.
| WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20
Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error.
Reported-and-Tested-by: Bruno Goncalves bgoncalv@redhat.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/cacheinfo.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c index 587543c6c51cb..97c42be71338a 100644 --- a/arch/arm64/kernel/cacheinfo.c +++ b/arch/arm64/kernel/cacheinfo.c @@ -45,7 +45,8 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
int init_cache_level(unsigned int cpu) { - unsigned int ctype, level, leaves, fw_level; + unsigned int ctype, level, leaves; + int fw_level; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) { @@ -63,6 +64,9 @@ int init_cache_level(unsigned int cpu) else fw_level = acpi_find_last_cache_level(cpu);
+ if (fw_level < 0) + return fw_level; + if (level < fw_level) { /* * some external caches not specified in CLIDR_EL1
From: Mark Brown broonie@kernel.org
[ Upstream commit 7ddcaf78e93c9282b4d92184f511b4d5bee75355 ]
The signal code has a limit of 64K on the size of a stack frame that it will generate, if this limit is exceeded then a process will be killed if it receives a signal. Unfortunately with the advent of SME this limit is too small - the maximum possible size of the ZA register alone is 64K. This is not an issue for practical systems at present but is easily seen using virtual platforms.
Raise the limit to 256K, this is substantially more than could be used by any current architecture extension.
Signed-off-by: Mark Brown broonie@kernel.org Acked-by: Catalin Marinas catalin.marinas@arm.com Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 0dab5679a97d5..c42089ce089f7 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -91,7 +91,7 @@ static size_t sigframe_size(struct rt_sigframe_user_layout const *user) * not taken into account. This limit is not a guarantee and is * NOT ABI. */ -#define SIGFRAME_MAXSZ SZ_64K +#define SIGFRAME_MAXSZ SZ_256K
static int __sigframe_alloc(struct rt_sigframe_user_layout *user, unsigned long *offset, size_t size, bool extend)
From: Csókás Bence csokas.bence@prolan.hu
[ Upstream commit f79959220fa5fbda939592bf91c7a9ea90419040 ]
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers.
Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()`
Signed-off-by: Csókás Bence csokas.bence@prolan.hu Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec.h | 10 ++++++ drivers/net/ethernet/freescale/fec_main.c | 42 ++++++++++++++++++++--- drivers/net/ethernet/freescale/fec_ptp.c | 29 ++++++++++++++++ 3 files changed, 77 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 6ea98af63b341..0b8a06d833d5c 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -593,6 +593,13 @@ struct fec_enet_private { int pps_enable; unsigned int next_counter;
+ struct { + struct timespec64 ts_phc; + u64 ns_sys; + u32 at_corr; + u8 at_inc_corr; + } ptp_saved_state; + u64 ethtool_stats[]; };
@@ -603,5 +610,8 @@ void fec_ptp_disable_hwts(struct net_device *ndev); int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr); int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);
+void fec_ptp_save_state(struct fec_enet_private *fep); +int fec_ptp_restore_state(struct fec_enet_private *fep); + /****************************************************************************/ #endif /* FEC_H */ diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index d8bdaf2e5365c..b0999596b7858 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -253,8 +253,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); #define FEC_MMFR_TA (2 << 16) #define FEC_MMFR_DATA(v) (v & 0xffff) /* FEC ECR bits definition */ -#define FEC_ECR_MAGICEN (1 << 2) -#define FEC_ECR_SLEEP (1 << 3) +#define FEC_ECR_RESET BIT(0) +#define FEC_ECR_ETHEREN BIT(1) +#define FEC_ECR_MAGICEN BIT(2) +#define FEC_ECR_SLEEP BIT(3) +#define FEC_ECR_EN1588 BIT(4)
#define FEC_MII_TIMEOUT 30000 /* us */
@@ -950,6 +953,9 @@ fec_restart(struct net_device *ndev) u32 temp_mac[2]; u32 rcntl = OPT_FRAME_SIZE | 0x04; u32 ecntl = 0x2; /* ETHEREN */ + struct ptp_clock_request ptp_rq = { .type = PTP_CLK_REQ_PPS }; + + fec_ptp_save_state(fep);
/* Whack a reset. We should wait for this. * For i.MX6SX SOC, enet use AXI bus, we use disable MAC @@ -1101,7 +1107,7 @@ fec_restart(struct net_device *ndev) }
if (fep->bufdesc_ex) - ecntl |= (1 << 4); + ecntl |= FEC_ECR_EN1588;
#ifndef CONFIG_M5272 /* Enable the MIB statistic event counters */ @@ -1115,6 +1121,14 @@ fec_restart(struct net_device *ndev) if (fep->bufdesc_ex) fec_ptp_start_cyclecounter(ndev);
+ /* Restart PPS if needed */ + if (fep->pps_enable) { + /* Clear flag so fec_ptp_enable_pps() doesn't return immediately */ + fep->pps_enable = 0; + fec_ptp_restore_state(fep); + fep->ptp_caps.enable(&fep->ptp_caps, &ptp_rq, 1); + } + /* Enable interrupts we wish to service */ if (fep->link) writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); @@ -1150,6 +1164,8 @@ fec_stop(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8); u32 val; + struct ptp_clock_request ptp_rq = { .type = PTP_CLK_REQ_PPS }; + u32 ecntl = 0;
/* We cannot expect a graceful transmit stop without link !!! */ if (fep->link) { @@ -1159,6 +1175,8 @@ fec_stop(struct net_device *ndev) netdev_err(ndev, "Graceful transmit stop did not complete!\n"); }
+ fec_ptp_save_state(fep); + /* Whack a reset. We should wait for this. * For i.MX6SX SOC, enet use AXI bus, we use disable MAC * instead of reset MAC itself. @@ -1180,12 +1198,28 @@ fec_stop(struct net_device *ndev) } writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
+ if (fep->bufdesc_ex) + ecntl |= FEC_ECR_EN1588; + /* We have to keep ENET enabled to have MII interrupt stay working */ if (fep->quirks & FEC_QUIRK_ENET_MAC && !(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) { - writel(2, fep->hwp + FEC_ECNTRL); + ecntl |= FEC_ECR_ETHEREN; writel(rmii_mode, fep->hwp + FEC_R_CNTRL); } + + writel(ecntl, fep->hwp + FEC_ECNTRL); + + if (fep->bufdesc_ex) + fec_ptp_start_cyclecounter(ndev); + + /* Restart PPS if needed */ + if (fep->pps_enable) { + /* Clear flag so fec_ptp_enable_pps() doesn't return immediately */ + fep->pps_enable = 0; + fec_ptp_restore_state(fep); + fep->ptp_caps.enable(&fep->ptp_caps, &ptp_rq, 1); + } }
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index c5ae673005908..63e221b95abed 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -638,7 +638,36 @@ void fec_ptp_stop(struct platform_device *pdev) struct net_device *ndev = platform_get_drvdata(pdev); struct fec_enet_private *fep = netdev_priv(ndev);
+ if (fep->pps_enable) + fec_ptp_enable_pps(fep, 0); + cancel_delayed_work_sync(&fep->time_keep); if (fep->ptp_clock) ptp_clock_unregister(fep->ptp_clock); } + +void fec_ptp_save_state(struct fec_enet_private *fep) +{ + u32 atime_inc_corr; + + fec_ptp_gettime(&fep->ptp_caps, &fep->ptp_saved_state.ts_phc); + fep->ptp_saved_state.ns_sys = ktime_get_ns(); + + fep->ptp_saved_state.at_corr = readl(fep->hwp + FEC_ATIME_CORR); + atime_inc_corr = readl(fep->hwp + FEC_ATIME_INC) & FEC_T_INC_CORR_MASK; + fep->ptp_saved_state.at_inc_corr = (u8)(atime_inc_corr >> FEC_T_INC_CORR_OFFSET); +} + +int fec_ptp_restore_state(struct fec_enet_private *fep) +{ + u32 atime_inc = readl(fep->hwp + FEC_ATIME_INC) & FEC_T_INC_MASK; + u64 ns_sys; + + writel(fep->ptp_saved_state.at_corr, fep->hwp + FEC_ATIME_CORR); + atime_inc |= ((u32)fep->ptp_saved_state.at_inc_corr) << FEC_T_INC_CORR_OFFSET; + writel(atime_inc, fep->hwp + FEC_ATIME_INC); + + ns_sys = ktime_get_ns() - fep->ptp_saved_state.ns_sys; + timespec64_add_ns(&fep->ptp_saved_state.ts_phc, ns_sys); + return fec_ptp_settime(&fep->ptp_caps, &fep->ptp_saved_state.ts_phc); +}
From: lily floridsleeves@gmail.com
[ Upstream commit c624c58e08b15105662b9ab9be23d14a6b945a49 ]
skb_copy_bits() could fail, which requires a check on the return value.
Signed-off-by: Li Zhong floridsleeves@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/skbuff.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 48b6438f2a3d9..548f1adc14284 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3986,9 +3986,8 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb, SKB_GSO_CB(nskb)->csum_start = skb_headroom(nskb) + doffset; } else { - skb_copy_bits(head_skb, offset, - skb_put(nskb, len), - len); + if (skb_copy_bits(head_skb, offset, skb_put(nskb, len), len)) + goto err; } continue; }
From: Letu Ren fantasquex@gmail.com
[ Upstream commit 19f953e7435644b81332dd632ba1b2d80b1e37af ]
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be copied from user, then go through `fb_set_var()` and `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`. Along the path, `var->pixclock` won't be modified. This function checks whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is zero, there will be a divide by zero error. So, it is necessary to check whether denominator is zero to avoid crash. As this bug is found by Syzkaller, logs are listed below.
divide error in pm2fb_check_var Call Trace: <TASK> fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Letu Ren fantasquex@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/pm2fb.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c index 0642555289e06..c12d46e283598 100644 --- a/drivers/video/fbdev/pm2fb.c +++ b/drivers/video/fbdev/pm2fb.c @@ -616,6 +616,11 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) return -EINVAL; }
+ if (!var->pixclock) { + DPRINTK("pixclock is zero\n"); + return -EINVAL; + } + if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) { DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock));
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ]
Add missing pci_disable_device() in error path in chipsfb_pci_init().
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/chipsfb.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c index 393894af26f84..2b00a9d554fc0 100644 --- a/drivers/video/fbdev/chipsfb.c +++ b/drivers/video/fbdev/chipsfb.c @@ -430,6 +430,7 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) err_release_fb: framebuffer_release(p); err_disable: + pci_disable_device(dp); err_out: return rc; }
From: Qu Huang jinsdb@126.com
[ Upstream commit b8983d42524f10ac6bf35bbce6a7cc8e45f61e04 ]
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang jinsdb@126.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c index f84701c562bf2..97441f373531f 100644 --- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c @@ -178,6 +178,7 @@ static void mmhub_v1_0_init_cache_regs(struct amdgpu_device *adev) tmp = REG_SET_FIELD(tmp, VM_L2_CNTL2, INVALIDATE_L2_CACHE, 1); WREG32_SOC15(MMHUB, 0, mmVM_L2_CNTL2, tmp);
+ tmp = mmVM_L2_CNTL3_DEFAULT; if (adev->gmc.translate_further) { tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3, BANK_SELECT, 12); tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3,
linux-stable-mirror@lists.linaro.org
-
Sasha Levin