Hi Renesas SoC team,

On 05.03.2019 06:56, Dirk Behme wrote:

From: Achim Dahlhoff Achim.Dahlhoff@de.bosch.com

The tx_status poll in the rcar_dmac driver reads the status register which indicates which chunk is busy (DMACHCRB). Afterwards the point inside the chunk is read from DMATCRB. It is possible that the chunk has changed between the two reads. The result is a non-monotonous increase of the residue. Fix this by introducing a 'safe read' logic.

Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Achim Dahlhoff Achim.Dahlhoff@de.bosch.com Signed-off-by: Dirk Behme dirk.behme@de.bosch.com Cc: stable@vger.kernel.org # v4.16+

---

Note: Patch done against mainline v5.0

Changes in v2: Switch goto/retry to for loop

Any status update on this and the first fix

[PATCH v2 1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

?

I still think they are required to fix the rcar-dmac driver.

Best regards

Dirk

drivers/dma/sh/rcar-dmac.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 2ea59229d7f5..cceddc7099b0 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1282,6 +1282,9 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, enum dma_status status; unsigned int residue = 0; unsigned int dptr = 0;

• unsigned int chcrb;
• unsigned int tcrb;
• unsigned int i;

if (!desc) return 0; @@ -1329,6 +1332,24 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, return 0; }

• /*

• * We need to read two registers.
  

• * Make sure the control register does not skip to next chunk
  

• * while reading the counter.
  

• * Trying it 3 times should be enough: Initial read, retry, retry
  

• * for the paranoid.
  

• */
  

• for (i = 0; i < 3; i++) {

• chcrb = rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
  

• 			    RCAR_DMACHCRB_DPTR_MASK;
  

• tcrb = rcar_dmac_chan_read(chan, RCAR_DMATCRB);
  

• /* Still the same? */
  

• if (chcrb == (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
  

• 	      RCAR_DMACHCRB_DPTR_MASK))
  

• 	break;
  

• }
• WARN_ONCE(i >= 3, "residue might be not continuous!");
• /*
  • In descriptor mode the descriptor running pointer is not maintained
  • by the interrupt handler, find the running descriptor from the

@@ -1336,8 +1357,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, * mode just use the running descriptor pointer. */ if (desc->hwdescs.use) {

• dptr = (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
  

• 	RCAR_DMACHCRB_DPTR_MASK) >> RCAR_DMACHCRB_DPTR_SHIFT;
  

• dptr = chcrb >> RCAR_DMACHCRB_DPTR_SHIFT;
  

  if (dptr == 0) dptr = desc->nchunks; dptr--;

@@ -1355,7 +1375,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, } /* Add the residue for the current chunk. */

• residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift;

• residue += tcrb << desc->xfer_shift;

return residue; }