Lt6911uxe is used in IPU6 / x86 platform, worked with an out-of-tree int3472 patch and upstream intel/ipu6 before. It is only used on ACPI platforms till now and there are no devicetree bindings for this driver.

The upstream int3472 driver uses "hpd" instead of "readystat" now. this patch updates the irq_gpio name to "hpd" accordingly, so that mere users can now use the upstream version directly without relying on out-of-tree int3472 pin support.

The new name "hpd" (Hotplug Detect) aligns with common naming conventions used in other drivers(like adv7604) and documentation.

Fixes: e49563c3be09d4 ("media: i2c: add lt6911uxe hdmi bridge driver") Cc: stable@vger.kernel.org Signed-off-by: Dongcheng Yan dongcheng.yan@intel.com --- drivers/media/i2c/lt6911uxe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/lt6911uxe.c b/drivers/media/i2c/lt6911uxe.c index c5b40bb58a37..24857d683fcf 100644 --- a/drivers/media/i2c/lt6911uxe.c +++ b/drivers/media/i2c/lt6911uxe.c @@ -605,10 +605,10 @@ static int lt6911uxe_probe(struct i2c_client *client) return dev_err_probe(dev, PTR_ERR(lt6911uxe->reset_gpio), "failed to get reset gpio\n");

- lt6911uxe->irq_gpio = devm_gpiod_get(dev, "readystat", GPIOD_IN); + lt6911uxe->irq_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN); if (IS_ERR(lt6911uxe->irq_gpio)) return dev_err_probe(dev, PTR_ERR(lt6911uxe->irq_gpio), - "failed to get ready_stat gpio\n"); + "failed to get hpd gpio\n");

ret = lt6911uxe_fwnode_parse(lt6911uxe, dev); if (ret)

Hi reviewers,

I'm sorry for that I forget to rm cc:stable@vger.kernel.org in maillist

Best Regards, Dongcheng

On 4/25/2025 6:43 PM, Dongcheng Yan wrote:

Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is being received. On the host side this is wired to a GPIO for polling or interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges lt6911uxe and lt6911uxc.

The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it here as well.

Signed-off-by: Dongcheng Yan dongcheng.yan@intel.com

drivers/platform/x86/intel/int3472/common.h | 1 + drivers/platform/x86/intel/int3472/discrete.c | 6 ++++++ 2 files changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h index 51b818e62a25..4593d567caf4 100644 --- a/drivers/platform/x86/intel/int3472/common.h +++ b/drivers/platform/x86/intel/int3472/common.h @@ -23,6 +23,7 @@ #define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c #define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d #define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 #define INT3472_PDEV_MAX_NAME_LEN 23 #define INT3472_MAX_SENSOR_GPIOS 3 diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 394975f55d64..efa3bc7af193 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -191,6 +191,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id = "privacy-led"; *gpio_flags = GPIO_ACTIVE_HIGH; break;

• case INT3472_GPIO_TYPE_HOTPLUG_DETECT:

• *con_id = "hpd";
  

• *gpio_flags = GPIO_ACTIVE_HIGH;
  

• break;
  

  case INT3472_GPIO_TYPE_POWER_ENABLE: *con_id = "avdd"; *gpio_flags = GPIO_ACTIVE_HIGH;

@@ -221,6 +225,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3

• 0x0b Power enable
• 0x0c Clock enable
• 0x0d Privacy LED

• • 0x13 Hotplug detect
  • There are some known platform specific quirks where that does not quite
  • hold up; for example where a pin with type 0x01 (Power down) is mapped to

@@ -290,6 +295,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, switch (type) { case INT3472_GPIO_TYPE_RESET: case INT3472_GPIO_TYPE_POWERDOWN:

• case INT3472_GPIO_TYPE_HOTPLUG_DETECT: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags); if (ret) err_msg = "Failed to map GPIO pin to sensor\n";

base-commit: 4d1e8c8f11c611db5828e4bae7292bc295eea8ef