Without this, we get failures like this when the kernel attempts to initialize a cx231xx device:

[16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces [16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0 [16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9) [16046.154350] i2c i2c-11: Added multiplexed i2c bus 13 [16046.154379] i2c i2c-11: Added multiplexed i2c bus 14 [16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) [16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) [16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3 [16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2] [16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0 [16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 [16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5 [16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 [16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 [16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O [16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered [16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered [16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22

Likely a regession since Commit 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines") (v4.19-rc1-100-g9d6d20e652c0), which introduced the use of PAD_SIGNAL_DV within v4l2_mc_create_media_graph().

This also modifies cx25840 to remove the VBI pad, matching the action taken in Commit 092a37875a22 ("media: v4l2: remove VBI output pad").

Fixes: 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines") Cc: stable@vger.kernel.org Signed-off-by: Cody P Schafer dev@codyps.com --- drivers/media/i2c/cx25840/cx25840-core.c | 3 ++- drivers/media/i2c/cx25840/cx25840-core.h | 1 - 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index b168bf3635b6..8b0b8b5aa531 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -5216,8 +5216,9 @@ static int cx25840_probe(struct i2c_client *client, * those extra inputs. So, let's add it only when needed. */ state->pads[CX25840_PAD_INPUT].flags = MEDIA_PAD_FL_SINK; + state->pads[CX25840_PAD_INPUT].sig_type = PAD_SIGNAL_ANALOG; state->pads[CX25840_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; - state->pads[CX25840_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; + state->pads[CX25840_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV; sd->entity.function = MEDIA_ENT_F_ATV_DECODER;

ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads), diff --git a/drivers/media/i2c/cx25840/cx25840-core.h b/drivers/media/i2c/cx25840/cx25840-core.h index c323b1af1f83..9efefa15d090 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.h +++ b/drivers/media/i2c/cx25840/cx25840-core.h @@ -40,7 +40,6 @@ enum cx25840_model { enum cx25840_media_pads { CX25840_PAD_INPUT, CX25840_PAD_VID_OUT, - CX25840_PAD_VBI_OUT,

CX25840_NUM_PADS };