From: James Smart jsmart2021@gmail.com
[ Upstream commit 5a9eeff57f340238c39c95d8e7e54c96fc722de7 ]
Driver is hitting null pring pointers in lpfc_do_work().
Pointer assignment occurs based on SLI-revision. If recovering after an error, its possible the sli revision for the port was cleared, making the lpfc_phba_elsring() not return a ring pointer, thus the null pointer.
Add SLI revision checking to lpfc_phba_elsring() and status checking to all callers.
Signed-off-by: Dick Kennedy dick.kennedy@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc.h | 6 ++++++ drivers/scsi/lpfc/lpfc_els.c | 2 ++ drivers/scsi/lpfc/lpfc_init.c | 7 ++++++- drivers/scsi/lpfc/lpfc_sli.c | 2 ++ 4 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index bc61cc8bc6f02..03e95a3216c8c 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1239,6 +1239,12 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) static inline struct lpfc_sli_ring * lpfc_phba_elsring(struct lpfc_hba *phba) { + /* Return NULL if sli_rev has become invalid due to bad fw */ + if (phba->sli_rev != LPFC_SLI_REV4 && + phba->sli_rev != LPFC_SLI_REV3 && + phba->sli_rev != LPFC_SLI_REV2) + return NULL; + if (phba->sli_rev == LPFC_SLI_REV4) { if (phba->sli4_hba.els_wq) return phba->sli4_hba.els_wq->pring; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index ddd29752d96dc..0032465d1b630 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1335,6 +1335,8 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) Fabric_DID);
pring = lpfc_phba_elsring(phba); + if (unlikely(!pring)) + return -EIO;
/* * Check the txcmplq for an iocb that matches the nport the driver is diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 25612ccf6ff28..1da125afebddb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1773,7 +1773,12 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action, lpfc_offline(phba); /* release interrupt for possible resource change */ lpfc_sli4_disable_intr(phba); - lpfc_sli_brdrestart(phba); + rc = lpfc_sli_brdrestart(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "6309 Failed to restart board\n"); + return rc; + } /* request and enable interrupt */ intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode); if (intr_mode == LPFC_INTR_ERROR) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 6c2b098b76095..0128ea32b208f 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4421,6 +4421,8 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba) hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
rc = lpfc_sli4_brdreset(phba); + if (rc) + return rc;
spin_lock_irq(&phba->hbalock); phba->pport->stopped = 0;
From: James Smart jsmart2021@gmail.com
[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]
When dif and first burst is used in a write command wqe, the driver was not properly setting fields in the io command request. This resulted in no dif bytes being sent and invalid xfer_rdy's, resulting in the io being aborted by the hardware.
Correct the wqe initializaton when both dif and first burst are used.
Signed-off-by: Dick Kennedy dick.kennedy@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 07cb671bb8550..2eba0c39ac1c4 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -2714,6 +2714,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; int fcpdl; + struct lpfc_vport *vport = phba->pport;
/* * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd @@ -2819,6 +2820,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, */ iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+ /* + * For First burst, we may need to adjust the initial transfer + * length for DIF + */ + if (iocb_cmd->un.fcpi.fcpi_XRdy && + (fcpdl < vport->cfg_first_burst_size)) + iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl; + return 0; err: if (lpfc_cmd->seg_cnt) @@ -3371,6 +3380,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; int fcpdl; + struct lpfc_vport *vport = phba->pport;
/* * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd @@ -3486,6 +3496,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, */ iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+ /* + * For First burst, we may need to adjust the initial transfer + * length for DIF + */ + if (iocb_cmd->un.fcpi.fcpi_XRdy && + (fcpdl < vport->cfg_first_burst_size)) + iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl; + /* * If the OAS driver feature is enabled and the lun is enabled for * OAS, set the oas iocb related flags.
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit d88b11ef91b15d0af9c0676cbf4f441a0dff0c56 ]
This sets the partition information on the SQ201 to be read out from the RedBoot partition table, removes the static partition table and sets our boot options to mount root from /dev/mtdblock2 where the squashfs+JFFS2 resides.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/gemini-sq201.dts | 37 ++++-------------------------- 1 file changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 63c02ca9513c4..e9e2f6ff0c583 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -20,7 +20,7 @@ };
chosen { - bootargs = "console=ttyS0,115200n8"; + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; };
@@ -71,37 +71,10 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>;
- partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00120000>; - read-only; - }; - partition@120000 { - label = "Kernel"; - reg = <0x00120000 0x00200000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; };
linux-stable-mirror@lists.linaro.org
-
Sasha Levin