Sometimes errors are seen, when doing DR swap, like: [ 24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5) [ 24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
There may be some race, which lead to read CCI, before the command complete flag is set, hence returning -EIO. Similar fix has been done also in ucsi_acpi [1].
In case of a spurious or otherwise delayed notification it is possible that CCI still reports the previous completion. The UCSI spec is aware of this and provides two completion bits in CCI, one for normal commands and one for acks. As acks and commands alternate the notification handler can determine if the completion bit is from the current command.
To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete commands if the completion bit matches.
[1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/
Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller") Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com --- Changes in v2: rebase and define ACK_PENDING as commented by Dmitry. --- drivers/usb/typec/ucsi/ucsi_stm32g0.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index ac48b7763114..ac69288e8bb0 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -65,6 +65,7 @@ struct ucsi_stm32g0 { struct device *dev; unsigned long flags; #define COMMAND_PENDING 1 +#define ACK_PENDING 2 const char *fw_name; struct ucsi *ucsi; bool suspended; @@ -396,9 +397,13 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const size_t len) { struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi); + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI; int ret;
- set_bit(COMMAND_PENDING, &g0->flags); + if (ack) + set_bit(ACK_PENDING, &g0->flags); + else + set_bit(COMMAND_PENDING, &g0->flags);
ret = ucsi_stm32g0_async_write(ucsi, offset, val, len); if (ret) @@ -406,9 +411,14 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000))) ret = -ETIMEDOUT; + else + return 0;
out_clear_bit: - clear_bit(COMMAND_PENDING, &g0->flags); + if (ack) + clear_bit(ACK_PENDING, &g0->flags); + else + clear_bit(COMMAND_PENDING, &g0->flags);
return ret; } @@ -429,8 +439,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data) if (UCSI_CCI_CONNECTOR(cci)) ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
- if (test_bit(COMMAND_PENDING, &g0->flags) && - cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) + if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags)) + complete(&g0->complete); + if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags)) complete(&g0->complete);
return IRQ_HANDLED;
Hi,
Thanks for your patch.
FYI: kernel test robot notices the stable kernel rule is not satisfied.
The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html#opti...
Rule: add the tag "Cc: stable@vger.kernel.org" in the sign-off area to have the patch automatically included in the stable tree. Subject: [PATCH v2] usb: ucsi: stm32: fix command completion handling Link: https://lore.kernel.org/stable/20240612124656.2305603-1-fabrice.gasnier%40fo...
On Wed, Jun 12, 2024 at 02:46:56PM +0200, Fabrice Gasnier wrote:
Sometimes errors are seen, when doing DR swap, like: [ 24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5) [ 24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
There may be some race, which lead to read CCI, before the command complete flag is set, hence returning -EIO. Similar fix has been done also in ucsi_acpi [1].
In case of a spurious or otherwise delayed notification it is possible that CCI still reports the previous completion. The UCSI spec is aware of this and provides two completion bits in CCI, one for normal commands and one for acks. As acks and commands alternate the notification handler can determine if the completion bit is from the current command.
To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete commands if the completion bit matches.
[1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/
Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller") Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com
Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com
Changes in v2: rebase and define ACK_PENDING as commented by Dmitry.
drivers/usb/typec/ucsi/ucsi_stm32g0.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index ac48b7763114..ac69288e8bb0 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -65,6 +65,7 @@ struct ucsi_stm32g0 { struct device *dev; unsigned long flags; #define COMMAND_PENDING 1 +#define ACK_PENDING 2 const char *fw_name; struct ucsi *ucsi; bool suspended; @@ -396,9 +397,13 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const size_t len) { struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
- bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI; int ret;
- set_bit(COMMAND_PENDING, &g0->flags);
- if (ack)
set_bit(ACK_PENDING, &g0->flags);- else
set_bit(COMMAND_PENDING, &g0->flags);ret = ucsi_stm32g0_async_write(ucsi, offset, val, len); if (ret) @@ -406,9 +411,14 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000))) ret = -ETIMEDOUT;
- else
return 0;out_clear_bit:
- clear_bit(COMMAND_PENDING, &g0->flags);
- if (ack)
clear_bit(ACK_PENDING, &g0->flags);- else
clear_bit(COMMAND_PENDING, &g0->flags);return ret; } @@ -429,8 +439,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data) if (UCSI_CCI_CONNECTOR(cci)) ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
- if (test_bit(COMMAND_PENDING, &g0->flags) &&
cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
- if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags))
complete(&g0->complete);- if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags)) complete(&g0->complete);
return IRQ_HANDLED; -- 2.25.1
linux-stable-mirror@lists.linaro.org
-
Fabrice Gasnier -
Heikki Krogerus -
kernel test robot