The MSB part of the peripheral IDs need to go into the ATC_SRC_PER_MSB and ATC_DST_PER_MSB fields. Not the LSB part.

This fixes a severe regression for TSE-850 devices (compatible axentia,tse850v3) where output to the audio I2S codec (the main purpose of the device) simply do not work.

Fixes: d8840a7edcf0 ("dmaengine: at_hdmac: Use bitfield access macros") Cc: stable@vger.kernel.org Signed-off-by: Peter Rosin peda@axentia.se --- drivers/dma/at_hdmac.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 8858470246e1..6362013b90df 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -153,8 +153,6 @@ #define ATC_AUTO BIT(31) /* Auto multiple buffer tx enable */

/* Bitfields in CFG */ -#define ATC_PER_MSB(h) ((0x30U & (h)) >> 4) /* Extract most significant bits of a handshaking identifier */ - #define ATC_SRC_PER GENMASK(3, 0) /* Channel src rq associated with periph handshaking ifc h */ #define ATC_DST_PER GENMASK(7, 4) /* Channel dst rq associated with periph handshaking ifc h */ #define ATC_SRC_REP BIT(8) /* Source Replay Mod */ @@ -181,10 +179,15 @@ #define ATC_DPIP_HOLE GENMASK(15, 0) #define ATC_DPIP_BOUNDARY GENMASK(25, 16)

-#define ATC_SRC_PER_ID(id) (FIELD_PREP(ATC_SRC_PER_MSB, (id)) | \ - FIELD_PREP(ATC_SRC_PER, (id))) -#define ATC_DST_PER_ID(id) (FIELD_PREP(ATC_DST_PER_MSB, (id)) | \ - FIELD_PREP(ATC_DST_PER, (id))) +#define ATC_PER_MSB GENMASK(5, 4) /* Extract MSBs of a handshaking identifier */ +#define ATC_SRC_PER_ID(id) \ + ({ typeof(id) _id = (id); \ + FIELD_PREP(ATC_SRC_PER_MSB, FIELD_GET(ATC_PER_MSB, _id)) | \ + FIELD_PREP(ATC_SRC_PER, _id); }) +#define ATC_DST_PER_ID(id) \ + ({ typeof(id) _id = (id); \ + FIELD_PREP(ATC_DST_PER_MSB, FIELD_GET(ATC_PER_MSB, _id)) | \ + FIELD_PREP(ATC_DST_PER, _id); })

Some chips have two bits (e.g SAMA5D3), and some have three (e.g. SAM9G45). A field width of three is compatible as long as valid values are used for the different chips.

There is no current use of any value needing three bits, so the fixed bug is relatively benign.

Fixes: d8840a7edcf0 ("dmaengine: at_hdmac: Use bitfield access macros") Cc: stable@vger.kernel.org Reviewed-by: Tudor Ambarus tudor.ambarus@linaro.org Signed-off-by: Peter Rosin peda@axentia.se --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6362013b90df..ee3a219e3a89 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -132,7 +132,7 @@ #define ATC_DST_PIP BIT(12) /* Destination Picture-in-Picture enabled */ #define ATC_SRC_DSCR_DIS BIT(16) /* Src Descriptor fetch disable */ #define ATC_DST_DSCR_DIS BIT(20) /* Dst Descriptor fetch disable */ -#define ATC_FC GENMASK(22, 21) /* Choose Flow Controller */ +#define ATC_FC GENMASK(23, 21) /* Choose Flow Controller */ #define ATC_FC_MEM2MEM 0x0 /* Mem-to-Mem (DMA) */ #define ATC_FC_MEM2PER 0x1 /* Mem-to-Periph (DMA) */ #define ATC_FC_PER2MEM 0x2 /* Periph-to-Mem (DMA) */