From: Benjamin Berg benjamin@sipsolutions.net

[ Upstream commit 236f9fe39b02c15fa5530b53e9cca48354394389 ]

The threads allocated inside the kernel have only a single page of stack. Unfortunately, the vfprintf function in standard glibc may use too much stack-space, overflowing it.

To make os_info safe to be used by helper threads, use the kernel vscnprintf function into a smallish buffer and write out the information to stderr.

Signed-off-by: Benjamin Berg benjamin@sipsolutions.net Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- arch/um/os-Linux/util.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index fc0f2a9dee5a..1dca4ffbd572 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -173,23 +173,38 @@ __uml_setup("quiet", quiet_cmd_param, "quiet\n" " Turns off information messages during boot.\n\n");

+/* + * The os_info/os_warn functions will be called by helper threads. These + * have a very limited stack size and using the libc formatting functions + * may overflow the stack. + * So pull in the kernel vscnprintf and use that instead with a fixed + * on-stack buffer. + */ +int vscnprintf(char *buf, size_t size, const char *fmt, va_list args); + void os_info(const char *fmt, ...) { + char buf[256]; va_list list; + int len;

if (quiet_info) return;

va_start(list, fmt); - vfprintf(stderr, fmt, list); + len = vscnprintf(buf, sizeof(buf), fmt, list); + fwrite(buf, len, 1, stderr); va_end(list); }

void os_warn(const char *fmt, ...) { + char buf[256]; va_list list; + int len;

va_start(list, fmt); - vfprintf(stderr, fmt, list); + len = vscnprintf(buf, sizeof(buf), fmt, list); + fwrite(buf, len, 1, stderr); va_end(list); }

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit abe4eaa8618bb36c2b33e9cdde0499296a23448c ]

In 'basic' time-travel mode (without =inf-cpu or =ext), we still get timer interrupts. These can happen at arbitrary points in time, i.e. while in timer_read(), which pushes time forward just a little bit. Then, if we happen to get the interrupt after calculating the new time to push to, but before actually finishing that, the interrupt will set the time to a value that's incompatible with the forward, and we'll crash because time goes backwards when we do the forwarding.

Fix this by reading the time_travel_time, calculating the adjustment, and doing the adjustment all with interrupts disabled.

Reported-by: Vincent Whitchurch Vincent.Whitchurch@axis.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- arch/um/kernel/time.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index fddd1dec27e6..3e270da6b6f6 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -432,9 +432,29 @@ static void time_travel_update_time(unsigned long long next, bool idle) time_travel_del_event(&ne); }

+static void time_travel_update_time_rel(unsigned long long offs) +{ + unsigned long flags; + + /* + * Disable interrupts before calculating the new time so + * that a real timer interrupt (signal) can't happen at + * a bad time e.g. after we read time_travel_time but + * before we've completed updating the time. + */ + local_irq_save(flags); + time_travel_update_time(time_travel_time + offs, false); + local_irq_restore(flags); +} + void time_travel_ndelay(unsigned long nsec) { - time_travel_update_time(time_travel_time + nsec, false); + /* + * Not strictly needed to use _rel() version since this is + * only used in INFCPU/EXT modes, but it doesn't hurt and + * is more readable too. + */ + time_travel_update_time_rel(nsec); } EXPORT_SYMBOL(time_travel_ndelay);

@@ -568,7 +588,11 @@ static void time_travel_set_start(void) #define time_travel_time 0 #define time_travel_ext_waiting 0

-static inline void time_travel_update_time(unsigned long long ns, bool retearly) +static inline void time_travel_update_time(unsigned long long ns, bool idle) +{ +} + +static inline void time_travel_update_time_rel(unsigned long long offs) { }

@@ -720,9 +744,7 @@ static u64 timer_read(struct clocksource *cs) */ if (!irqs_disabled() && !in_interrupt() && !in_softirq() && !time_travel_ext_waiting) - time_travel_update_time(time_travel_time + - TIMER_MULTIPLIER, - false); + time_travel_update_time_rel(TIMER_MULTIPLIER); return time_travel_time / TIMER_MULTIPLIER; }

From: Oleksandr Tyshchenko oleksandr_tyshchenko@epam.com

[ Upstream commit 2d2db7d40254d5fb53b11ebd703cd1ed0c5de7a1 ]

DO NOT access the underlying struct page of an sg table exported by DMA-buf in dmabuf_imp_to_refs(), this is not allowed. Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.

Fortunately, here (for special Xen device) we can avoid using pages and calculate gfns directly from dma addresses provided by the sg table.

Suggested-by: Daniel Vetter daniel@ffwll.ch Signed-off-by: Oleksandr Tyshchenko oleksandr_tyshchenko@epam.com Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Stefano Stabellini sstabellini@kernel.org Acked-by: Daniel Vetter daniel@ffwll.ch Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/gntdev-dmabuf.c | 50 ++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/xen/gntdev-dmabuf.c b/drivers/xen/gntdev-dmabuf.c index 4c13cbc99896..398ea69c176c 100644 --- a/drivers/xen/gntdev-dmabuf.c +++ b/drivers/xen/gntdev-dmabuf.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/dma-buf.h> +#include <linux/dma-direct.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/uaccess.h> @@ -56,7 +57,7 @@ struct gntdev_dmabuf {

/* Number of pages this buffer has. */ int nr_pages; - /* Pages of this buffer. */ + /* Pages of this buffer (only for dma-buf export). */ struct page **pages; };

@@ -490,7 +491,7 @@ static int dmabuf_exp_from_refs(struct gntdev_priv *priv, int flags, /* DMA buffer import support. */

static int -dmabuf_imp_grant_foreign_access(struct page **pages, u32 *refs, +dmabuf_imp_grant_foreign_access(unsigned long *gfns, u32 *refs, int count, int domid) { grant_ref_t priv_gref_head; @@ -513,7 +514,7 @@ dmabuf_imp_grant_foreign_access(struct page **pages, u32 *refs, }

gnttab_grant_foreign_access_ref(cur_ref, domid, - xen_page_to_gfn(pages[i]), 0); + gfns[i], 0); refs[i] = cur_ref; }

@@ -535,7 +536,6 @@ static void dmabuf_imp_end_foreign_access(u32 *refs, int count)

static void dmabuf_imp_free_storage(struct gntdev_dmabuf *gntdev_dmabuf) { - kfree(gntdev_dmabuf->pages); kfree(gntdev_dmabuf->u.imp.refs); kfree(gntdev_dmabuf); } @@ -555,12 +555,6 @@ static struct gntdev_dmabuf *dmabuf_imp_alloc_storage(int count) if (!gntdev_dmabuf->u.imp.refs) goto fail;

- gntdev_dmabuf->pages = kcalloc(count, - sizeof(gntdev_dmabuf->pages[0]), - GFP_KERNEL); - if (!gntdev_dmabuf->pages) - goto fail; - gntdev_dmabuf->nr_pages = count;

for (i = 0; i < count; i++) @@ -582,7 +576,8 @@ dmabuf_imp_to_refs(struct gntdev_dmabuf_priv *priv, struct device *dev, struct dma_buf *dma_buf; struct dma_buf_attachment *attach; struct sg_table *sgt; - struct sg_page_iter sg_iter; + struct sg_dma_page_iter sg_iter; + unsigned long *gfns; int i;

dma_buf = dma_buf_get(fd); @@ -630,26 +625,31 @@ dmabuf_imp_to_refs(struct gntdev_dmabuf_priv *priv, struct device *dev,

gntdev_dmabuf->u.imp.sgt = sgt;

- /* Now convert sgt to array of pages and check for page validity. */ + gfns = kcalloc(count, sizeof(*gfns), GFP_KERNEL); + if (!gfns) { + ret = ERR_PTR(-ENOMEM); + goto fail_unmap; + } + + /* + * Now convert sgt to array of gfns without accessing underlying pages. + * It is not allowed to access the underlying struct page of an sg table + * exported by DMA-buf, but since we deal with special Xen dma device here + * (not a normal physical one) look at the dma addresses in the sg table + * and then calculate gfns directly from them. + */ i = 0; - for_each_sgtable_page(sgt, &sg_iter, 0) { - struct page *page = sg_page_iter_page(&sg_iter); - /* - * Check if page is valid: this can happen if we are given - * a page from VRAM or other resources which are not backed - * by a struct page. - */ - if (!pfn_valid(page_to_pfn(page))) { - ret = ERR_PTR(-EINVAL); - goto fail_unmap; - } + for_each_sgtable_dma_page(sgt, &sg_iter, 0) { + dma_addr_t addr = sg_page_iter_dma_address(&sg_iter); + unsigned long pfn = bfn_to_pfn(XEN_PFN_DOWN(dma_to_phys(dev, addr)));

- gntdev_dmabuf->pages[i++] = page; + gfns[i++] = pfn_to_gfn(pfn); }

- ret = ERR_PTR(dmabuf_imp_grant_foreign_access(gntdev_dmabuf->pages, + ret = ERR_PTR(dmabuf_imp_grant_foreign_access(gfns, gntdev_dmabuf->u.imp.refs, count, domid)); + kfree(gfns); if (IS_ERR(ret)) goto fail_end_access;

From: "Xiaowu.ding" xiaowu.ding@jaguarmicro.com

[ Upstream commit ee01c0b4384d19ecc5dfa7db3fd4303f965c3eba ]

Message Handling Unit version is v2.1.

When arm_mhuv2 working with the data protocol transfer mode. We have split one mhu into two channels, and every channel include four channel windows, the two channels share one gic spi interrupt.

There is a problem with the sending scenario.

The first channel will take up 0-3 channel windows, and the second channel take up 4-7 channel windows. When the first channel send the data, and the receiver will clear all the four channels status. Although we only enabled the interrupt on the last channel window with register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8. Currently we just clear the last channel windows int status with the data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7, not be the 0x0.

Then the second channel send the data, the receiver read the data, clear all the four channel windows status, trigger the sender interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7, get_irq_chan_comb function will always return the first channel.

So this patch clear all channel windows int status to avoid this interrupt confusion.

Signed-off-by: Xiaowu.ding xiaowu.ding@jaguarmicro.com Acked-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Jassi Brar jaswinder.singh@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/arm_mhuv2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mailbox/arm_mhuv2.c b/drivers/mailbox/arm_mhuv2.c index 3af15083a25a..68f766621b9b 100644 --- a/drivers/mailbox/arm_mhuv2.c +++ b/drivers/mailbox/arm_mhuv2.c @@ -552,7 +552,8 @@ static irqreturn_t mhuv2_sender_interrupt(int irq, void *data) priv = chan->con_priv;

if (!IS_PROTOCOL_DOORBELL(priv)) { - writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + priv->windows - 1].int_clr); + for (i = 0; i < priv->windows; i++) + writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + i].int_clr);

if (chan->cl) { mbox_chan_txdone(chan, 0);