4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit dd9ee3444014e8f28c0eefc9fffc9ac9c5248c12 ]

Recently we run a network test over ipcomp virtual tunnel.We find that if a ipv4 packet needs fragment, then the peer can't receive it.

We deep into the code and find that when packet need fragment the smaller fragment will be encapsulated by ipip not ipcomp. So when the ipip packet goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code always set skb'dev to the last fragment's dev. After ipv4 defrag processing, when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV error.

This patch adds compatible support for the ipip process in ipcomp virtual tunnel.

Signed-off-by: Su Yanjun suyj.fnst@cn.fujitsu.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/ip_vti.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)

diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index d7b43e700023..68a21bf75dd0 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -74,6 +74,33 @@ static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi, return 0; }

+static int vti_input_ipip(struct sk_buff *skb, int nexthdr, __be32 spi, + int encap_type) +{ + struct ip_tunnel *tunnel; + const struct iphdr *iph = ip_hdr(skb); + struct net *net = dev_net(skb->dev); + struct ip_tunnel_net *itn = net_generic(net, vti_net_id); + + tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY, + iph->saddr, iph->daddr, 0); + if (tunnel) { + if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) + goto drop; + + XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel; + + skb->dev = tunnel->dev; + + return xfrm_input(skb, nexthdr, spi, encap_type); + } + + return -EINVAL; +drop: + kfree_skb(skb); + return 0; +} + static int vti_rcv(struct sk_buff *skb) { XFRM_SPI_SKB_CB(skb)->family = AF_INET; @@ -82,6 +109,14 @@ static int vti_rcv(struct sk_buff *skb) return vti_input(skb, ip_hdr(skb)->protocol, 0, 0); }

+static int vti_rcv_ipip(struct sk_buff *skb) +{ + XFRM_SPI_SKB_CB(skb)->family = AF_INET; + XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr); + + return vti_input_ipip(skb, ip_hdr(skb)->protocol, ip_hdr(skb)->saddr, 0); +} + static int vti_rcv_cb(struct sk_buff *skb, int err) { unsigned short family; @@ -435,6 +470,12 @@ static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = { .priority = 100, };

+static struct xfrm_tunnel ipip_handler __read_mostly = { + .handler = vti_rcv_ipip, + .err_handler = vti4_err, + .priority = 0, +}; + static int __net_init vti_init_net(struct net *net) { int err; @@ -603,6 +644,13 @@ static int __init vti_init(void) if (err < 0) goto xfrm_proto_comp_failed;

+ msg = "ipip tunnel"; + err = xfrm4_tunnel_register(&ipip_handler, AF_INET); + if (err < 0) { + pr_info("%s: cant't register tunnel\n",__func__); + goto xfrm_tunnel_failed; + } + msg = "netlink interface"; err = rtnl_link_register(&vti_link_ops); if (err < 0) @@ -612,6 +660,8 @@ static int __init vti_init(void)

rtnl_link_failed: xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP); +xfrm_tunnel_failed: + xfrm4_tunnel_deregister(&ipip_handler, AF_INET); xfrm_proto_comp_failed: xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH); xfrm_proto_ah_failed:

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 12c44aba6618b7f6c437076e5722237190f6cd5f ]

Using standard integer type was fine while all operations on it were guarded by the nftnl subsys mutex.

This isn't true anymore: 1. transactions are guarded only by a pernet mutex, so concurrent rule manipulation in different netns is racy 2. the ->destroy hook runs from a work queue after the transaction mutex has been released already.

cpu0 cpu1 (net 1) cpu2 (net 2) kworker nft_compat->destroy nft_compat->init nft_compat->init if (--nft_xt->ref == 0) nft_xt->ref++ nft_xt->ref++

Switch to refcount_t. Doing this however only fixes a minor aspect, nft_compat also performs linked-list operations in an unsafe way.

This is addressed in the next two patches.

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions") Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Reported-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_compat.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index c90a4640723f..791f3e693e3d 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -26,7 +26,7 @@ struct nft_xt { struct list_head head; struct nft_expr_ops ops; - unsigned int refcnt; + refcount_t refcnt;

/* Unlike other expressions, ops doesn't have static storage duration. * nft core assumes they do. We use kfree_rcu so that nft core can @@ -45,7 +45,7 @@ struct nft_xt_match_priv {

static bool nft_xt_put(struct nft_xt *xt) { - if (--xt->refcnt == 0) { + if (refcount_dec_and_test(&xt->refcnt)) { list_del(&xt->head); kfree_rcu(xt, rcu_head); return true; @@ -273,7 +273,7 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return -EINVAL;

nft_xt = container_of(expr->ops, struct nft_xt, ops); - nft_xt->refcnt++; + refcount_inc(&nft_xt->refcnt); return 0; }

@@ -487,7 +487,7 @@ __nft_match_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return ret;

nft_xt = container_of(expr->ops, struct nft_xt, ops); - nft_xt->refcnt++; + refcount_inc(&nft_xt->refcnt); return 0; }

@@ -790,7 +790,7 @@ nft_match_select_ops(const struct nft_ctx *ctx, goto err; }

- nft_match->refcnt = 0; + refcount_set(&nft_match->refcnt, 0); nft_match->ops.type = &nft_match_type; nft_match->ops.eval = nft_match_eval; nft_match->ops.init = nft_match_init; @@ -894,7 +894,7 @@ nft_target_select_ops(const struct nft_ctx *ctx, goto err; }

- nft_target->refcnt = 0; + refcount_set(&nft_target->refcnt, 0); nft_target->ops.type = &nft_target_type; nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize)); nft_target->ops.init = nft_target_init; @@ -965,7 +965,7 @@ static void __exit nft_compat_module_exit(void) list_for_each_entry_safe(xt, next, &nft_target_list, head) { struct xt_target *target = xt->ops.data;

- if (WARN_ON_ONCE(xt->refcnt)) + if (WARN_ON_ONCE(refcount_read(&xt->refcnt))) continue; module_put(target->me); kfree(xt); @@ -974,7 +974,7 @@ static void __exit nft_compat_module_exit(void) list_for_each_entry_safe(xt, next, &nft_match_list, head) { struct xt_match *match = xt->ops.data;

- if (WARN_ON_ONCE(xt->refcnt)) + if (WARN_ON_ONCE(refcount_read(&xt->refcnt))) continue; module_put(match->me); kfree(xt);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b2e3d68d1251a051a620f9086e18f7ffa6833b5b ]

The nft_compat destroy function deletes the nft_xt object from a list. This isn't allowed anymore. Destroy functions are called asynchronously, i.e. next batch can find the object that has a pending ->destroy() invocation:

cpu0 cpu1 worker ->destroy for_each_entry() if (x == ... return x->ops; list_del(x) kfree_rcu(x) expr->ops->... // ops was free'd

To resolve this, the list_del needs to occur before the transaction mutex gets released. nf_tables has a 'deactivate' hook for this purpose, so use that to unlink the object from the list.

Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Reported-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_compat.c | 48 +++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index d3412138e000..a354e9771697 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -29,6 +29,9 @@ struct nft_xt { struct nft_expr_ops ops; refcount_t refcnt;

+ /* used only when transaction mutex is locked */ + unsigned int listcnt; + /* Unlike other expressions, ops doesn't have static storage duration. * nft core assumes they do. We use kfree_rcu so that nft core can * can check expr->ops->size even after nft_compat->destroy() frees @@ -61,7 +64,7 @@ static struct nft_compat_net *nft_compat_pernet(struct net *net) static bool nft_xt_put(struct nft_xt *xt) { if (refcount_dec_and_test(&xt->refcnt)) { - list_del(&xt->head); + WARN_ON_ONCE(!list_empty(&xt->head)); kfree_rcu(xt, rcu_head); return true; } @@ -556,6 +559,43 @@ nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr) __nft_match_destroy(ctx, expr, nft_expr_priv(expr)); }

+static void nft_compat_activate(const struct nft_ctx *ctx, + const struct nft_expr *expr, + struct list_head *h) +{ + struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops); + + if (xt->listcnt == 0) + list_add(&xt->head, h); + + xt->listcnt++; +} + +static void nft_compat_activate_mt(const struct nft_ctx *ctx, + const struct nft_expr *expr) +{ + struct nft_compat_net *cn = nft_compat_pernet(ctx->net); + + nft_compat_activate(ctx, expr, &cn->nft_match_list); +} + +static void nft_compat_activate_tg(const struct nft_ctx *ctx, + const struct nft_expr *expr) +{ + struct nft_compat_net *cn = nft_compat_pernet(ctx->net); + + nft_compat_activate(ctx, expr, &cn->nft_target_list); +} + +static void nft_compat_deactivate(const struct nft_ctx *ctx, + const struct nft_expr *expr) +{ + struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops); + + if (--xt->listcnt == 0) + list_del_init(&xt->head); +} + static void nft_match_large_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr) { @@ -809,6 +849,8 @@ nft_match_select_ops(const struct nft_ctx *ctx, nft_match->ops.eval = nft_match_eval; nft_match->ops.init = nft_match_init; nft_match->ops.destroy = nft_match_destroy; + nft_match->ops.activate = nft_compat_activate_mt; + nft_match->ops.deactivate = nft_compat_deactivate; nft_match->ops.dump = nft_match_dump; nft_match->ops.validate = nft_match_validate; nft_match->ops.data = match; @@ -825,6 +867,7 @@ nft_match_select_ops(const struct nft_ctx *ctx,

nft_match->ops.size = matchsize;

+ nft_match->listcnt = 1; list_add(&nft_match->head, &cn->nft_match_list);

return &nft_match->ops; @@ -911,6 +954,8 @@ nft_target_select_ops(const struct nft_ctx *ctx, nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize)); nft_target->ops.init = nft_target_init; nft_target->ops.destroy = nft_target_destroy; + nft_target->ops.activate = nft_compat_activate_tg; + nft_target->ops.deactivate = nft_compat_deactivate; nft_target->ops.dump = nft_target_dump; nft_target->ops.validate = nft_target_validate; nft_target->ops.data = target; @@ -920,6 +965,7 @@ nft_target_select_ops(const struct nft_ctx *ctx, else nft_target->ops.eval = nft_target_eval_xt;

+ nft_target->listcnt = 1; list_add(&nft_target->head, &cn->nft_target_list);

return &nft_target->ops;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1a51c5da5acc6c188c917ba572eebac5f8793432 ]

The perf_proc_update_handler() handles /proc/sys/kernel/perf_event_max_sample_rate syctl variable. When the PMU IRQ handler timing monitoring is disabled, i.e, when /proc/sys/kernel/perf_cpu_time_max_percent is equal to 0 or 100, then no modification to sysctl_perf_event_sample_rate is allowed to prevent possible hang from wrong values.

The problem is that the test to prevent modification is made after the sysctl variable is modified in perf_proc_update_handler().

You get an error:

$ echo 10001 >/proc/sys/kernel/perf_event_max_sample_rate echo: write error: invalid argument

But the value is still modified causing all sorts of inconsistencies:

$ cat /proc/sys/kernel/perf_event_max_sample_rate 10001

This patch fixes the problem by moving the parsing of the value after the test.

Committer testing:

# echo 100 > /proc/sys/kernel/perf_cpu_time_max_percent # echo 10001 > /proc/sys/kernel/perf_event_max_sample_rate -bash: echo: write error: Invalid argument # cat /proc/sys/kernel/perf_event_max_sample_rate 10001 #

Signed-off-by: Stephane Eranian eranian@google.com Reviewed-by: Andi Kleen ak@linux.intel.com Reviewed-by: Jiri Olsa jolsa@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/1547169436-6266-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c index 699bc25d6204..18997730b665 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -436,18 +436,18 @@ int perf_proc_update_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { - int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); - - if (ret || !write) - return ret; - + int ret; + int perf_cpu = sysctl_perf_cpu_time_max_percent; /* * If throttling is disabled don't allow the write: */ - if (sysctl_perf_cpu_time_max_percent == 100 || - sysctl_perf_cpu_time_max_percent == 0) + if (write && (perf_cpu == 100 || perf_cpu == 0)) return -EINVAL;

+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + if (ret || !write) + return ret; + max_samples_per_tick = DIV_ROUND_UP(sysctl_perf_event_sample_rate, HZ); perf_sample_period_ns = NSEC_PER_SEC / sysctl_perf_event_sample_rate; update_perf_cpu_limits();

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]

This patch fixes an issue in cpumap.c when used with the TOPOLOGY header. In some configurations, some NUMA nodes may have no CPU (empty cpulist). Yet a cpumap map must be created otherwise perf abort with an error. This patch handles this case by creating a dummy map.

Before:

$ perf record -o - -e cycles noploop 2 | perf script -i - 0x6e8 [0x6c]: failed to process type: 80

After:

$ perf record -o - -e cycles noploop 2 | perf script -i - noploop for 2 seconds

Signed-off-by: Stephane Eranian eranian@google.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Andi Kleen ak@linux.intel.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/cpumap.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c index 1ccbd3342069..383674f448fc 100644 --- a/tools/perf/util/cpumap.c +++ b/tools/perf/util/cpumap.c @@ -134,7 +134,12 @@ struct cpu_map *cpu_map__new(const char *cpu_list) if (!cpu_list) return cpu_map__read_all_cpu_map();

- if (!isdigit(*cpu_list)) + /* + * must handle the case of empty cpumap to cover + * TOPOLOGY header for NUMA nodes with no CPU + * ( e.g., because of CPU hotplug) + */ + if (!isdigit(*cpu_list) && *cpu_list != '\0') goto out;

while (isdigit(*cpu_list)) { @@ -181,8 +186,10 @@ struct cpu_map *cpu_map__new(const char *cpu_list)

if (nr_cpus > 0) cpus = cpu_map__trim_new(nr_cpus, tmp_cpus); - else + else if (*cpu_list != '\0') cpus = cpu_map__default_new(); + else + cpus = cpu_map__dummy_new(); invalid: free(tmp_cpus); out:

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 904bba211acc2112fdf866e5a2bc6cd9ecd0de1b ]

The work completion length for a receiving a UD send with immediate is short by 4 bytes causing application using this opcode to fail.

The UD receive logic incorrectly subtracts 4 bytes for immediate value. These bytes are already included in header length and are used to calculate header/payload split, so the result is these 4 bytes are subtracted twice, once when the header length subtracted from the overall length and once again in the UD opcode specific path.

Remove the extra subtraction when handling the opcode.

Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Brian Welty brian.welty@intel.com Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/ud.c | 1 - drivers/infiniband/hw/qib/qib_ud.c | 1 - 2 files changed, 2 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c index 4baa8f4d49de..46bf74375ea6 100644 --- a/drivers/infiniband/hw/hfi1/ud.c +++ b/drivers/infiniband/hw/hfi1/ud.c @@ -980,7 +980,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { wc.ex.imm_data = packet->ohdr->u.ud.imm_data; wc.wc_flags = IB_WC_WITH_IMM; - tlen -= sizeof(u32); } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { wc.ex.imm_data = 0; wc.wc_flags = 0; diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c index 4d4c31ea4e2d..90268b838d4e 100644 --- a/drivers/infiniband/hw/qib/qib_ud.c +++ b/drivers/infiniband/hw/qib/qib_ud.c @@ -513,7 +513,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct ib_header *hdr, opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { wc.ex.imm_data = ohdr->u.ud.imm_data; wc.wc_flags = IB_WC_WITH_IMM; - tlen -= sizeof(u32); } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { wc.ex.imm_data = 0; wc.wc_flags = 0;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ]

In the error path of map_sg there is an incorrect if condition for breaking out of the loop that searches the scatterlist for mapped pages to unmap. Instead of breaking out of the loop once all the pages that were mapped have been unmapped, it will break out of the loop after it has unmapped 1 page. Fix the condition, so it breaks out of the loop only after all the mapped pages have been unmapped.

Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg") Cc: Joerg Roedel joro@8bytes.org Signed-off-by: Jerry Snitselaar jsnitsel@redhat.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 5f33f843d30a..ca3a250d8fa7 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2555,7 +2555,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist, bus_addr = address + s->dma_address + (j << PAGE_SHIFT); iommu_unmap_page(domain, bus_addr, PAGE_SIZE);

- if (--mapped_pages) + if (--mapped_pages == 0) goto out_free_iova; } }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below: UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21 signed integer overflow: -2147483647 * 1000 cannot be represented in type 'int'

Reproduce program: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h>

#define IPPROTO_IP 0 #define IPPROTO_RAW 255

#define IP_VS_BASE_CTL (64+1024+64) #define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)

/* The argument to IP_VS_SO_GET_TIMEOUT */ struct ipvs_timeout_t { int tcp_timeout; int tcp_fin_timeout; int udp_timeout; };

int main() { int ret = -1; int sockfd = -1; struct ipvs_timeout_t to;

sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW); if (sockfd == -1) { printf("socket init error\n"); return -1; }

to.tcp_timeout = -2147483647; to.tcp_fin_timeout = -2147483647; to.udp_timeout = -2147483647;

ret = setsockopt(sockfd, IPPROTO_IP, IP_VS_SO_SET_TIMEOUT, (char *)(&to), sizeof(to));

printf("setsockopt return %d\n", ret); return ret; }

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu zhangxiaoxu5@huawei.com Acked-by: Simon Horman horms@verge.net.au Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipvs/ip_vs_ctl.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 432141f04af3..7d6318664eb2 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2220,6 +2220,18 @@ static int ip_vs_set_timeout(struct netns_ipvs *ipvs, struct ip_vs_timeout_user u->tcp_fin_timeout, u->udp_timeout);

+#ifdef CONFIG_IP_VS_PROTO_TCP + if (u->tcp_timeout < 0 || u->tcp_timeout > (INT_MAX / HZ) || + u->tcp_fin_timeout < 0 || u->tcp_fin_timeout > (INT_MAX / HZ)) { + return -EINVAL; + } +#endif + +#ifdef CONFIG_IP_VS_PROTO_UDP + if (u->udp_timeout < 0 || u->udp_timeout > (INT_MAX / HZ)) + return -EINVAL; +#endif + #ifdef CONFIG_IP_VS_PROTO_TCP if (u->tcp_timeout) { pd = ip_vs_proto_data_get(ipvs, IPPROTO_TCP);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 303aef8b84272d73999a3207dd05bbe10ed89dc5 ]

The ti_clk_parse_divider_data() function is only called from _get_div_table_from_setup(). That function doesn't look at the return value but instead looks at the "*table" pointer. In this case, if the kcalloc() fails then *table is NULL (which means success). It should instead be an error pointer.

The ti_clk_parse_divider_data() function has two callers. One checks for errors and the other doesn't. I have fixed it so now both handle errors.

Fixes: 4f6be5655dc9 ("clk: ti: divider: add driver internal API for parsing divider data") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Tero Kristo t-kristo@ti.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/ti/divider.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index 8d77090ad94a..0241450f3eb3 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -403,8 +403,10 @@ int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div, num_dividers = i;

tmp = kcalloc(valid_div + 1, sizeof(*tmp), GFP_KERNEL); - if (!tmp) + if (!tmp) { + *table = ERR_PTR(-ENOMEM); return -ENOMEM; + }

valid_div = 0; *width = 0; @@ -439,6 +441,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup) { struct clk_omap_divider *div; struct clk_omap_reg *reg; + int ret;

if (!setup) return NULL; @@ -458,6 +461,12 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup) div->flags |= CLK_DIVIDER_POWER_OF_TWO;

div->table = _get_div_table_from_setup(setup, &div->width); + if (IS_ERR(div->table)) { + ret = PTR_ERR(div->table); + kfree(div); + return ERR_PTR(ret); + } +

div->shift = setup->bit_shift; div->latch = -EINVAL;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4fe8713b873fc881284722ce4ac47995de7cf62c ]

ccount_timer_shutdown is called from the atomic context in the secondary_start_kernel, resulting in the following BUG:

BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 Preemption disabled at: secondary_start_kernel+0xa1/0x130 Call Trace: ___might_sleep+0xe7/0xfc __might_sleep+0x41/0x44 synchronize_irq+0x24/0x64 disable_irq+0x11/0x14 ccount_timer_shutdown+0x12/0x20 clockevents_switch_state+0x82/0xb4 clockevents_exchange_device+0x54/0x60 tick_check_new_device+0x46/0x70 clockevents_register_device+0x8c/0xc8 clockevents_config_and_register+0x1d/0x2c local_timer_setup+0x75/0x7c secondary_start_kernel+0xb4/0x130 should_never_return+0x32/0x35

Use disable_irq_nosync instead of disable_irq to avoid it. This is safe because the ccount timer IRQ is per-CPU, and once IRQ is masked the ISR will not be called.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index fd524a54d2ab..378186b5eb40 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -89,7 +89,7 @@ static int ccount_timer_shutdown(struct clock_event_device *evt) container_of(evt, struct ccount_timer, evt);

if (timer->irq_enabled) { - disable_irq(evt->irq); + disable_irq_nosync(evt->irq); timer->irq_enabled = 0; } return 0;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ae662eec8a515ab550524e04c793b5ddf1aae3a1 ]

This ratio is the most used among all other architectures and make icache_hygiene libhugetlbfs test pass: this test mmap lots of hugepages whose addresses, without this patch, reach the end of the process user address space.

Signed-off-by: Alexandre Ghiti aghiti@upmem.com Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Palmer Dabbelt palmer@sifive.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h index 0531f49af5c3..ce70bceb8872 100644 --- a/arch/riscv/include/asm/processor.h +++ b/arch/riscv/include/asm/processor.h @@ -22,7 +22,7 @@ * This decides where the kernel will search for a free chunk of vm * space during mmap's. */ -#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE >> 1) +#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)

#define STACK_TOP TASK_SIZE #define STACK_TOP_MAX STACK_TOP

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b531b6137834a55857a337ac17510d6436b6fbb ]

The cpu-hotplug test assumes that we can offline the maximum CPU as described by /sys/devices/system/cpu/offline. However, in the case where the number of CPUs exceeds like kernel configuration then the offline count can be greater than the present count and we end up trying to test the offlining of a CPU that is not available to offline. Fix this by testing the maximum present CPU instead.

Also, the test currently offlines the CPU and does not online it, so fix this by onlining the CPU after the test.

Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Shuah Khan shuah@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/cpu-hotplug/cpu-on-off-test.sh | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh index bab13dd025a6..0d26b5e3f966 100755 --- a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh +++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh @@ -37,6 +37,10 @@ prerequisite() exit $ksft_skip fi

+ present_cpus=`cat $SYSFS/devices/system/cpu/present` + present_max=${present_cpus##*-} + echo "present_cpus = $present_cpus present_max = $present_max" + echo -e "\t Cpus in online state: $online_cpus"

offline_cpus=`cat $SYSFS/devices/system/cpu/offline` @@ -151,6 +155,8 @@ online_cpus=0 online_max=0 offline_cpus=0 offline_max=0 +present_cpus=0 +present_max=0

while getopts e:ahp: opt; do case $opt in @@ -190,9 +196,10 @@ if [ $allcpus -eq 0 ]; then online_cpu_expect_success $online_max

if [[ $offline_cpus -gt 0 ]]; then - echo -e "\t offline to online to offline: cpu $offline_max" - online_cpu_expect_success $offline_max - offline_cpu_expect_success $offline_max + echo -e "\t offline to online to offline: cpu $present_max" + online_cpu_expect_success $present_max + offline_cpu_expect_success $present_max + online_cpu $present_max fi exit 0 else

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 306b38305c0f86de7f17c5b091a95451dcc93d7d ]

Secondary CPU reset vector overlaps part of the double exception handler code, resulting in weird crashes and hangups when running user code. Move exception vectors one page up so that they don't clash with the secondary CPU reset vector.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/configs/smp_lx200_defconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig index 11fed6c06a7c..b5938160fb3d 100644 --- a/arch/xtensa/configs/smp_lx200_defconfig +++ b/arch/xtensa/configs/smp_lx200_defconfig @@ -33,6 +33,7 @@ CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y # CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set # CONFIG_PCI is not set +CONFIG_VECTORS_OFFSET=0x00002000 CONFIG_XTENSA_PLATFORM_XTFPGA=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8e47a457321ca1a74ad194ab5dcbca764bc70731 ]

migrate_page_move_mapping() expects pages with private data set to have a page_count elevated by 1. This is what used to happen for xfs through the buffer_heads code before the switch to iomap in commit 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads"). Not having the count elevated causes move_pages() to fail on memory mapped files coming from xfs.

Make iomap compatible with the migrate_page_move_mapping() assumption by elevating the page count as part of iomap_page_create() and lowering it in iomap_page_release().

It causes the move_pages() syscall to misbehave on memory mapped files from xfs. It does not not move any pages, which I suppose is "just" a perf issue, but it also ends up returning a positive number which is out of spec for the syscall. Talking to Michal Hocko, it sounds like returning positive numbers might be a necessary update to move_pages() anyway though.

Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads") Signed-off-by: Piotr Jaroszynski pjaroszynski@nvidia.com [hch: actually get/put the page iomap_migrate_page() to make it work properly] Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Dave Chinner dchinner@redhat.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/iomap.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/fs/iomap.c b/fs/iomap.c index ce837d962d47..7793e9e42ad5 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -116,6 +116,12 @@ iomap_page_create(struct inode *inode, struct page *page) atomic_set(&iop->read_count, 0); atomic_set(&iop->write_count, 0); bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE); + + /* + * migrate_page_move_mapping() assumes that pages with private data have + * their count elevated by 1. + */ + get_page(page); set_page_private(page, (unsigned long)iop); SetPagePrivate(page); return iop; @@ -132,6 +138,7 @@ iomap_page_release(struct page *page) WARN_ON_ONCE(atomic_read(&iop->write_count)); ClearPagePrivate(page); set_page_private(page, 0); + put_page(page); kfree(iop); }

@@ -569,8 +576,10 @@ iomap_migrate_page(struct address_space *mapping, struct page *newpage,

if (page_has_private(page)) { ClearPagePrivate(page); + get_page(newpage); set_page_private(newpage, page_private(page)); set_page_private(page, 0); + put_page(page); SetPagePrivate(newpage); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 25384ce5f9530def39421597b1457d9462df6455 ]

This fixes the following warning at boot when the kernel is booted on a board with more CPU cores than was configured in NR_CPUS:

smp_init_cpus: Core Count = 8 smp_init_cpus: Core Id = 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124 Call Trace: __warn$part$3+0x6a/0x7c warn_slowpath_null+0x35/0x3c smp_init_cpus+0x54/0x74 setup_arch+0x1c0/0x1d0 start_kernel+0x44/0x310 _startup+0x107/0x107

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/smp.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c index 80be6449c497..be1f280c322c 100644 --- a/arch/xtensa/kernel/smp.c +++ b/arch/xtensa/kernel/smp.c @@ -96,6 +96,11 @@ void __init smp_init_cpus(void) pr_info("%s: Core Count = %d\n", __func__, ncpus); pr_info("%s: Core Id = %d\n", __func__, core_id);

+ if (ncpus > NR_CPUS) { + ncpus = NR_CPUS; + pr_info("%s: limiting core count by %d\n", __func__, ncpus); + } + for (i = 0; i < ncpus; ++i) set_cpu_possible(i, true); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 263c6d75f9a544a3c2f8f6a26de4f4808d8f59cf ]

In hns enet driver, we use of_parse_handle() to get hold of the device node related to "ae-handle" but we have missed to put the node reference using of_node_put() after we are done using the node. This patch fixes it.

Note: This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217

Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf") Reported-by: Alexey Khoroshilov khoroshilov@ispras.ru Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 6242249c9f4c..b043370c2685 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -2419,6 +2419,8 @@ static int hns_nic_dev_probe(struct platform_device *pdev) out_notify_fail: (void)cancel_work_sync(&priv->service_task); out_read_prop_fail: + /* safe for ACPI FW */ + of_node_put(to_of_node(priv->fwnode)); free_netdev(ndev); return ret; } @@ -2448,6 +2450,9 @@ static int hns_nic_dev_remove(struct platform_device *pdev) set_bit(NIC_STATE_REMOVING, &priv->state); (void)cancel_work_sync(&priv->service_task);

+ /* safe for ACPI FW */ + of_node_put(to_of_node(priv->fwnode)); + free_netdev(ndev); return 0; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit cec8abba13e6a26729dfed41019720068eeeff2b ]

When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it.

Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c index 017e08452d8c..baf5cc251f32 100644 --- a/drivers/net/ethernet/hisilicon/hns_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -321,7 +321,7 @@ static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum) }

hns_mdio_cmd_write(mdio_dev, is_c45, - MDIO_C45_WRITE_ADDR, phy_id, devad); + MDIO_C45_READ, phy_id, devad); }

/* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2035f3ff8eaa29cfb5c8e2160b0f6e85eeb21a95 ]

Unlike ip(6)tables ebtables only counts user-defined chains.

The effect is that a 32bit ebtables binary on a 64bit kernel can do 'ebtables -N FOO' only after adding at least one rule, else the request fails with -EINVAL.

This is a similar fix as done in 3f1e53abff84 ("netfilter: ebtables: don't attempt to allocate 0-sized compat array").

Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests") Reported-by: Francesco Ruggeri fruggeri@arista.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/netfilter/ebtables.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 5e55cef0cec3..6693e209efe8 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -2293,9 +2293,12 @@ static int compat_do_replace(struct net *net, void __user *user,

xt_compat_lock(NFPROTO_BRIDGE);

- ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries); - if (ret < 0) - goto out_unlock; + if (tmp.nentries) { + ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries); + if (ret < 0) + goto out_unlock; + } + ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state); if (ret < 0) goto out_unlock;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 870f193d48c25a97d61a8e6c04e3c29a2c606850 ]

reuseport_bpf_numa fails to build due to undefined reference errors:

aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa /tmp/ccfUuExT.o: In function `send_from_node': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138: undefined reference to `numa_run_on_node' /tmp/ccfUuExT.o: In function `main': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230: undefined reference to `numa_available' /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233: undefined reference to `numa_max_node'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with.

More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead.

LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against libnuma.

Signed-off-by: Fathi Boudra fathi.boudra@linaro.org Signed-off-by: Shuah Khan shuah@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 923570a9708a..68e2295e7589 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -19,6 +19,6 @@ TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls KSFT_KHDR_INSTALL := 1 include ../lib.mk

-$(OUTPUT)/reuseport_bpf_numa: LDFLAGS += -lnuma +$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDFLAGS += -lpthread $(OUTPUT)/tcp_inq: LDFLAGS += -lpthread

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]

There is a NULL pointer dereference of dev_name in nfs_parse_devname()

The oops looks something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs] ... Call Trace: ? ida_alloc_range+0x34b/0x3d0 ? nfs_clone_super+0x80/0x80 [nfs] ? nfs_free_parsed_mount_data+0x60/0x60 [nfs] mount_fs+0x52/0x170 ? __init_waitqueue_head+0x3b/0x50 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on dev_name

Signed-off-by: Yao Liu yotta.liu@ucloud.cn Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/super.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 5ef2c71348bd..6b666d187907 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1906,6 +1906,11 @@ static int nfs_parse_devname(const char *dev_name, size_t len; char *end;

+ if (unlikely(!dev_name || !*dev_name)) { + dfprintk(MOUNT, "NFS: device name not specified\n"); + return -EINVAL; + } + /* Is the host name protected with square brakcets? */ if (*dev_name == '[') { end = strchr(++dev_name, ']');

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ff9296966e5e00b0d0d00477b2365a178f0f06a3 ]

VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++++ drivers/net/ethernet/qlogic/qed/qed_l2.h | 3 +++ drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++-- 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index b8baa6fcef8e..e68ca83ae915 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -748,6 +748,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, return rc; }

+ if (p_params->update_ctl_frame_check) { + p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en; + p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en; + } + /* Update mcast bins for VFs, PF doesn't use this functionality */ qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params);

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 8d80f1095d17..7127d5aaac42 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -219,6 +219,9 @@ struct qed_sp_vport_update_params { struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; + u8 update_ctl_frame_check; + u8 mac_chk_en; + u8 ethtype_chk_en; };

int qed_sp_vport_update(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index ca6290fa0f30..71a7af134dd8 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, params.vport_id = vf->vport_id; params.max_buffers_per_cqe = start->max_buffers_per_cqe; params.mtu = vf->mtu; - params.check_mac = true; + + /* Non trusted VFs should enable control frame filtering */ + params.check_mac = !vf->p_vf_info.is_trusted_configured;

rc = qed_sp_eth_vport_start(p_hwfn, &params); if (rc) { @@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) params.opaque_fid = vf->opaque_fid; params.vport_id = vf->vport_id;

+ params.update_ctl_frame_check = 1; + params.mac_chk_en = !vf_info->is_trusted_configured; + if (vf_info->rx_accept_mode & mask) { flags->update_rx_mode_config = 1; flags->rx_accept_filter = vf_info->rx_accept_mode; @@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) }

if (flags->update_rx_mode_config || - flags->update_tx_mode_config) + flags->update_tx_mode_config || + params.update_ctl_frame_check) qed_sp_vport_update(hwfn, &params, QED_SPQ_MODE_EBLOCK, NULL); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 7c81626a3c37e4ac320b8ad785694ba498f24794 ]

Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb.

Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index 9e728ec82c21..25f67c0d5c57 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -2441,19 +2441,24 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, { struct qed_ll2_tx_pkt_info pkt; const skb_frag_t *frag; + u8 flags = 0, nr_frags; int rc = -EINVAL, i; dma_addr_t mapping; u16 vlan = 0; - u8 flags = 0;

if (unlikely(skb->ip_summed != CHECKSUM_NONE)) { DP_INFO(cdev, "Cannot transmit a checksummed packet\n"); return -EINVAL; }

- if (1 + skb_shinfo(skb)->nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { + /* Cache number of fragments from SKB since SKB may be freed by + * the completion routine after calling qed_ll2_prepare_tx_packet() + */ + nr_frags = skb_shinfo(skb)->nr_frags; + + if (1 + nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { DP_ERR(cdev, "Cannot transmit a packet with %d fragments\n", - 1 + skb_shinfo(skb)->nr_frags); + 1 + nr_frags); return -EINVAL; }

@@ -2475,7 +2480,7 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, }

memset(&pkt, 0, sizeof(pkt)); - pkt.num_of_bds = 1 + skb_shinfo(skb)->nr_frags; + pkt.num_of_bds = 1 + nr_frags; pkt.vlan = vlan; pkt.bd_flags = flags; pkt.tx_dest = QED_LL2_TX_DEST_NW; @@ -2486,12 +2491,17 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, test_bit(QED_LL2_XMIT_FLAGS_FIP_DISCOVERY, &xmit_flags)) pkt.remove_stag = true;

+ /* qed_ll2_prepare_tx_packet() may actually send the packet if + * there are no fragments in the skb and subsequently the completion + * routine may run and free the SKB, so no dereferencing the SKB + * beyond this point unless skb has any fragments. + */ rc = qed_ll2_prepare_tx_packet(&cdev->hwfns[0], cdev->ll2->handle, &pkt, 1); if (rc) goto err;

- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + for (i = 0; i < nr_frags; i++) { frag = &skb_shinfo(skb)->frags[i];

mapping = skb_frag_dma_map(&cdev->pdev->dev, frag, 0,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]

The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses.

This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`.

Signed-off-by: Ming Lu ming.lu@citrix.com Reviewed-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libfc/fc_lport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index be83590ed955..ff943f477d6f 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1726,14 +1726,14 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, fc_frame_payload_op(fp) != ELS_LS_ACC) { FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n"); fc_lport_error(lport, fp); - goto err; + goto out; }

flp = fc_frame_payload_get(fp, sizeof(*flp)); if (!flp) { FC_LPORT_DBG(lport, "FLOGI bad response\n"); fc_lport_error(lport, fp); - goto err; + goto out; }

mfs = ntohs(flp->fl_csp.sp_bb_data) & @@ -1743,7 +1743,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " "lport->mfs:%hu\n", mfs, lport->mfs); fc_lport_error(lport, fp); - goto err; + goto out; }

if (mfs <= lport->mfs) {

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b2d3492fc591b1fb46b81d79ca1fc44cac6ae0ae ]

There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers.

Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/bnx2fc/bnx2fc_io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 350257c13a5b..bc9f2a2365f4 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -240,6 +240,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba) return NULL; }

+ cmgr->hba = hba; cmgr->free_list = kcalloc(arr_sz, sizeof(*cmgr->free_list), GFP_KERNEL); if (!cmgr->free_list) { @@ -256,7 +257,6 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba) goto mem_err; }

- cmgr->hba = hba; cmgr->cmds = (struct bnx2fc_cmd **)(cmgr + 1);

for (i = 0; i < arr_sz; i++) { @@ -295,7 +295,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba)

/* Allocate pool of io_bdts - one for each bnx2fc_cmd */ mem_size = num_ios * sizeof(struct io_bdt *); - cmgr->io_bdt_pool = kmalloc(mem_size, GFP_KERNEL); + cmgr->io_bdt_pool = kzalloc(mem_size, GFP_KERNEL); if (!cmgr->io_bdt_pool) { printk(KERN_ERR PFX "failed to alloc io_bdt_pool\n"); goto mem_err;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit d58bf90a32a33becec78c3034e781735049fcd25 ]

Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n)

Signed-off-by: Sinan Kaya okaya@kernel.org Acked-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 54f6a40c75c6..458f92aac92e 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -901,6 +901,7 @@ config TOSHIBA_WMI config ACPI_CMPC tristate "CMPC Laptop Extras" depends on ACPI && INPUT + depends on BACKLIGHT_LCD_SUPPORT depends on RFKILL || RFKILL=n select BACKLIGHT_CLASS_DEVICE help

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 00ae831dfe4474ef6029558f5eb3ef0332d80043 ]

Add the Atom Tremont model number to the Intel family list.

[ Tony: Also update comment at head of file to say "_X" suffix is also used for microserver parts. ]

Signed-off-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Qiuxu Zhuo qiuxu.zhuo@intel.com Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Borislav Petkov bp@suse.de Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Aristeu Rozanski aris@redhat.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: linux-edac linux-edac@vger.kernel.org Cc: Mauro Carvalho Chehab mchehab@s-opensource.com Cc: Megha Dey megha.dey@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Cc: Qiuxu Zhuo qiuxu.zhuo@intel.com Cc: Rajneesh Bhardwaj rajneesh.bhardwaj@intel.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/intel-family.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index 0dd6b0f4000e..d9a9993af882 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -6,7 +6,7 @@ * "Big Core" Processors (Branded as Core, Xeon, etc...) * * The "_X" parts are generally the EP and EX Xeons, or the - * "Extreme" ones, like Broadwell-E. + * "Extreme" ones, like Broadwell-E, or Atom microserver. * * While adding a new CPUID for a new microarchitecture, add a new * group to keep logically sorted out in chronological order. Within @@ -71,6 +71,7 @@ #define INTEL_FAM6_ATOM_GOLDMONT 0x5C /* Apollo Lake */ #define INTEL_FAM6_ATOM_GOLDMONT_X 0x5F /* Denverton */ #define INTEL_FAM6_ATOM_GOLDMONT_PLUS 0x7A /* Gemini Lake */ +#define INTEL_FAM6_ATOM_TREMONT_X 0x86 /* Jacobsville */

/* Xeon Phi */

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b677dfae5aa197afc5191755a76a8727ffca538a ]

In some old AMD KVM implementation, guest's EFER.LME bit is cleared by KVM when the hypervsior detects that the guest sets CR0.PG to 0. This causes the guest OS to reboot when it tries to return from 32-bit trampoline code because the CPU is in incorrect state: CR4.PAE=1, CR0.PG=1, CS.L=1, but EFER.LME=0. As a precaution, set EFER.LME=1 as part of long mode activation procedure. This extra step won't cause any harm when Linux is booted on a bare-metal machine.

Signed-off-by: Wei Huang wei@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Acked-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Cc: bp@alien8.de Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20190104054411.12489-1-wei@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/boot/compressed/head_64.S | 8 ++++++++ arch/x86/boot/compressed/pgtable.h | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 64037895b085..f105ae8651c9 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -600,6 +600,14 @@ ENTRY(trampoline_32bit_src) leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax movl %eax, %cr3 3: + /* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */ + pushl %ecx + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + popl %ecx + /* Enable PAE and LA57 (if required) paging modes */ movl $X86_CR4_PAE, %eax cmpl $0, %edx diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h index 91f75638f6e6..6ff7e81b5628 100644 --- a/arch/x86/boot/compressed/pgtable.h +++ b/arch/x86/boot/compressed/pgtable.h @@ -6,7 +6,7 @@ #define TRAMPOLINE_32BIT_PGTABLE_OFFSET 0

#define TRAMPOLINE_32BIT_CODE_OFFSET PAGE_SIZE -#define TRAMPOLINE_32BIT_CODE_SIZE 0x60 +#define TRAMPOLINE_32BIT_CODE_SIZE 0x70

#define TRAMPOLINE_32BIT_STACK_END TRAMPOLINE_32BIT_SIZE

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and attempts to apply a microcode patch if it is of different level than the currently installed level.

While the processor won't actually load a level that is less than what is already installed, the logic wrongly returns UCODE_NEW thus signaling to its caller reload_store() that a late loading should be attempted.

If the file-system contains an older microcode revision than what is currently running, such a late microcode reload can result in these misleading messages:

x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot, early_detect_mem_encrypt() is called and cleared the SME and SEV features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the current level is greater than(!) and not only equal to the current patch level.

[ bp: massage commit message. ]

Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: Borislav Petkov bp@suse.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlenda... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/microcode/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 07b5fc00b188..a4e7e100ed26 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -707,7 +707,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size) if (!p) { return ret; } else { - if (boot_cpu_data.microcode == p->patch_id) + if (boot_cpu_data.microcode >= p->patch_id) return ret;

ret = UCODE_NEW;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f2b3d8566d81deaca31f4e3163def0bea7746e11 ]

On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text.

__hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic.

Move the __hyp_text check in the kprobes blacklist so it applies on VHE systems too, to cover the common code and guest enter/exit assembly.

Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able") Reviewed-by: Christoffer Dall christoffer.dall@arm.com Signed-off-by: James Morse james.morse@arm.com Acked-by: Masami Hiramatsu mhiramat@kernel.org Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/probes/kprobes.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index 2a5b338b2542..f17afb99890c 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -478,13 +478,13 @@ bool arch_within_kprobe_blacklist(unsigned long addr) addr < (unsigned long)__entry_text_end) || (addr >= (unsigned long)__idmap_text_start && addr < (unsigned long)__idmap_text_end) || + (addr >= (unsigned long)__hyp_text_start && + addr < (unsigned long)__hyp_text_end) || !!search_exception_tables(addr)) return true;

if (!is_kernel_in_hyp_mode()) { - if ((addr >= (unsigned long)__hyp_text_start && - addr < (unsigned long)__hyp_text_end) || - (addr >= (unsigned long)__hyp_idmap_text_start && + if ((addr >= (unsigned long)__hyp_idmap_text_start && addr < (unsigned long)__hyp_idmap_text_end)) return true; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command line causes the following null pointer dereference:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] Call Trace: efi_runtime_map_copy+0x28/0x30 bzImage64_load+0x688/0x872 arch_kexec_kernel_image_load+0x6d/0x70 kimage_file_alloc_init+0x13e/0x220 __x64_sys_kexec_file_load+0x144/0x290 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

[ bp: Massage commit message. ]

Suggested-by: Dave Young dyoung@redhat.com Signed-off-by: Kairui Song kasong@redhat.com Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Dave Young dyoung@redhat.com Cc: AKASHI Takahiro takahiro.akashi@linaro.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Ard Biesheuvel ard.biesheuvel@linaro.org Cc: bhe@redhat.com Cc: David Howells dhowells@redhat.com Cc: erik.schmauss@intel.com Cc: fanc.fnst@cn.fujitsu.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: kexec@lists.infradead.org Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: Philipp Rudo prudo@linux.vnet.ibm.com Cc: rafael.j.wysocki@intel.com Cc: robert.moore@intel.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Cc: Yannik Sembritzki yannik@sembritzki.me Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/kexec-bzimage64.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c index 278cd07228dd..9490a2845f14 100644 --- a/arch/x86/kernel/kexec-bzimage64.c +++ b/arch/x86/kernel/kexec-bzimage64.c @@ -167,6 +167,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr, struct efi_info *current_ei = &boot_params.efi_info; struct efi_info *ei = &params->efi_info;

+ if (!efi_enabled(EFI_RUNTIME_SERVICES)) + return 0; + if (!current_ei->efi_memmap_size) return 0;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a8e911d13540487942d53137c156bd7707f66e5d ]

If the kernel is configured with KASAN_EXTRA, the stack size is increasted significantly because this option sets "-fstack-reuse" to "none" in GCC [1]. As a result, it triggers stack overrun quite often with 32k stack size compiled using GCC 8. For example, this reproducer

https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/sysca...

triggers a "corrupted stack end detected inside scheduler" very reliably with CONFIG_SCHED_STACK_END_CHECK enabled.

There are just too many functions that could have a large stack with KASAN_EXTRA due to large local variables that have been called over and over again without being able to reuse the stacks. Some noticiable ones are

size 7648 shrink_page_list 3584 xfs_rmap_convert 3312 migrate_page_move_mapping 3312 dev_ethtool 3200 migrate_misplaced_transhuge_page 3168 copy_process

There are other 49 functions are over 2k in size while compiling kernel with "-Wframe-larger-than=" even with a related minimal config on this machine. Hence, it is too much work to change Makefiles for each object to compile without "-fsanitize-address-use-after-scope" individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23

Although there is a patch in GCC 9 to help the situation, GCC 9 probably won't be released in a few months and then it probably take another 6-month to 1-year for all major distros to include it as a default. Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020 when GCC 9 is everywhere. Until then, this patch will help users avoid stack overrun.

This has already been fixed for arm64 for the same reason via 6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA").

Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw Signed-off-by: Qian Cai cai@lca.pw Cc: Thomas Gleixner tglx@linutronix.de Cc: Ingo Molnar mingo@redhat.com Cc: Borislav Petkov bp@alien8.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Andrey Ryabinin aryabinin@virtuozzo.com Cc: Alexander Potapenko glider@google.com Cc: Dmitry Vyukov dvyukov@google.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/page_64_types.h | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index 8f657286d599..0ce558a8150d 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -7,7 +7,11 @@ #endif

#ifdef CONFIG_KASAN +#ifdef CONFIG_KASAN_EXTRA +#define KASAN_STACK_ORDER 2 +#else #define KASAN_STACK_ORDER 1 +#endif #else #define KASAN_STACK_ORDER 0 #endif

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 24feb47c5fa5b825efb0151f28906dfdad027e61 ]

If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct pages access from test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers.

Here are the the panic examples: CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: test_pages_in_a_zone+0xde/0x160 show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix this by checking whether the pfn to check is within the zone.

[mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org

[mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Signed-off-by: Michal Hocko mhocko@suse.com Signed-off-by: Mikhail Zaslonko zaslonko@linux.ibm.com Tested-by: Mikhail Gavrilov mikhail.v.gavrilov@gmail.com Reviewed-by: Oscar Salvador osalvador@suse.de Tested-by: Gerald Schaefer gerald.schaefer@de.ibm.com Cc: Heiko Carstens heiko.carstens@de.ibm.com Cc: Martin Schwidefsky schwidefsky@de.ibm.com Cc: Mikhail Gavrilov mikhail.v.gavrilov@gmail.com Cc: Pavel Tatashin pasha.tatashin@soleen.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/memory_hotplug.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 5ce0d929ff48..488aa11495d2 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1275,6 +1275,9 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn, i++; if (i == MAX_ORDER_NR_PAGES || pfn + i >= end_pfn) continue; + /* Check if we got outside of the zone */ + if (zone && !zone_spans_pfn(zone, pfn + i)) + return 0; page = pfn_to_page(pfn + i); if (zone && page_zone(page) != zone) return 0;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit db7ddeab3ce5d64c9696e70d61f45ea9909cd196 ]

There is a copy and paste bug so we set "config->test_driver" to NULL twice instead of setting "config->test_fs". Smatch complains that it leads to a double free:

lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed

Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/test_kmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_kmod.c b/lib/test_kmod.c index d82d022111e0..9cf77628fc91 100644 --- a/lib/test_kmod.c +++ b/lib/test_kmod.c @@ -632,7 +632,7 @@ static void __kmod_config_free(struct test_config *config) config->test_driver = NULL;

kfree_const(config->test_fs); - config->test_driver = NULL; + config->test_fs = NULL; }

static void kmod_config_free(struct kmod_test_device *test_dev)

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]

autofs_expire_run() calls dput(dentry) to drop the reference count of dentry. However, dentry is read via autofs_dentry_ino(dentry) after that. This may result in a use-free-bug. The patch drops the reference count of dentry only when it is never used.

Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto... Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Ian Kent raven@themaw.net Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/autofs/expire.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/autofs/expire.c b/fs/autofs/expire.c index d441244b79df..28d9c2b1b3bb 100644 --- a/fs/autofs/expire.c +++ b/fs/autofs/expire.c @@ -596,7 +596,6 @@ int autofs_expire_run(struct super_block *sb, pkt.len = dentry->d_name.len; memcpy(pkt.name, dentry->d_name.name, pkt.len); pkt.name[pkt.len] = '\0'; - dput(dentry);

if (copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire))) ret = -EFAULT; @@ -609,6 +608,8 @@ int autofs_expire_run(struct super_block *sb, complete_all(&ino->expire_complete); spin_unlock(&sbi->fs_lock);

+ dput(dentry); + return ret; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 891cb2a72d821f930a39d5900cb7a3aa752c1d5b ]

Rong Chen has reported the following boot crash:

PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 239 Comm: udevd Not tainted 5.0.0-rc4-00149-gefad4e4 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:page_mapping+0x12/0x80 Code: 5d c3 48 89 df e8 0e ad 02 00 85 c0 75 da 89 e8 5b 5d c3 0f 1f 44 00 00 53 48 89 fb 48 8b 43 08 48 8d 50 ff a8 01 48 0f 45 da <48> 8b 53 08 48 8d 42 ff 83 e2 01 48 0f 44 c3 48 83 38 ff 74 2f 48 RSP: 0018:ffff88801fa87cd8 EFLAGS: 00010202 RAX: ffffffffffffffff RBX: fffffffffffffffe RCX: 000000000000000a RDX: fffffffffffffffe RSI: ffffffff820b9a20 RDI: ffff88801e5c0000 RBP: 6db6db6db6db6db7 R08: ffff88801e8bb000 R09: 0000000001b64d13 R10: ffff88801fa87cf8 R11: 0000000000000001 R12: ffff88801e640000 R13: ffffffff820b9a20 R14: ffff88801f145258 R15: 0000000000000001 FS: 00007fb2079817c0(0000) GS:ffff88801dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000006 CR3: 000000001fa82000 CR4: 00000000000006a0 Call Trace: __dump_page+0x14/0x2c0 is_mem_section_removable+0x24c/0x2c0 removable_show+0x87/0xa0 dev_attr_show+0x25/0x60 sysfs_kf_seq_show+0xba/0x110 seq_read+0x196/0x3f0 __vfs_read+0x34/0x180 vfs_read+0xa0/0x150 ksys_read+0x44/0xb0 do_syscall_64+0x5e/0x4a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe

and bisected it down to commit efad4e475c31 ("mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone").

The reason for the crash is that the mapping is garbage for poisoned (uninitialized) page. This shouldn't happen as all pages in the zone's boundary should be initialized.

Later debugging revealed that the actual problem is an off-by-one when evaluating the end_page. 'start_pfn + nr_pages' resp 'zone_end_pfn' refers to a pfn after the range and as such it might belong to a differen memory section.

This along with CONFIG_SPARSEMEM then makes the loop condition completely bogus because a pointer arithmetic doesn't work for pages from two different sections in that memory model.

Fix the issue by reworking is_pageblock_removable to be pfn based and only use struct page where necessary. This makes the code slightly easier to follow and we will remove the problematic pointer arithmetic completely.

Link: http://lkml.kernel.org/r/20190218181544.14616-1-mhocko@kernel.org Fixes: efad4e475c31 ("mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone") Signed-off-by: Michal Hocko mhocko@suse.com Reported-by: rong.a.chen@intel.com Tested-by: rong.a.chen@intel.com Acked-by: Mike Rapoport rppt@linux.ibm.com Reviewed-by: Oscar Salvador osalvador@suse.de Cc: Matthew Wilcox willy@infradead.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/memory_hotplug.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 488aa11495d2..cb201163666f 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1189,11 +1189,13 @@ static inline int pageblock_free(struct page *page) return PageBuddy(page) && page_order(page) >= pageblock_order; }

-/* Return the start of the next active pageblock after a given page */ -static struct page *next_active_pageblock(struct page *page) +/* Return the pfn of the start of the next active pageblock after a given pfn */ +static unsigned long next_active_pageblock(unsigned long pfn) { + struct page *page = pfn_to_page(pfn); + /* Ensure the starting page is pageblock-aligned */ - BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1)); + BUG_ON(pfn & (pageblock_nr_pages - 1));

/* If the entire pageblock is free, move to the end of free page */ if (pageblock_free(page)) { @@ -1201,16 +1203,16 @@ static struct page *next_active_pageblock(struct page *page) /* be careful. we don't have locks, page_order can be changed.*/ order = page_order(page); if ((order < MAX_ORDER) && (order >= pageblock_order)) - return page + (1 << order); + return pfn + (1 << order); }

- return page + pageblock_nr_pages; + return pfn + pageblock_nr_pages; }

-static bool is_pageblock_removable_nolock(struct page *page) +static bool is_pageblock_removable_nolock(unsigned long pfn) { + struct page *page = pfn_to_page(pfn); struct zone *zone; - unsigned long pfn;

/* * We have to be careful here because we are iterating over memory @@ -1233,13 +1235,14 @@ static bool is_pageblock_removable_nolock(struct page *page) /* Checks if this range of memory is likely to be hot-removable. */ bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages) { - struct page *page = pfn_to_page(start_pfn); - unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page))); - struct page *end_page = pfn_to_page(end_pfn); + unsigned long end_pfn, pfn; + + end_pfn = min(start_pfn + nr_pages, + zone_end_pfn(page_zone(pfn_to_page(start_pfn))));

/* Check the starting page of each pageblock within the range */ - for (; page < end_page; page = next_active_pageblock(page)) { - if (!is_pageblock_removable_nolock(page)) + for (pfn = start_pfn; pfn < end_pfn; pfn = next_active_pageblock(pfn)) { + if (!is_pageblock_removable_nolock(pfn)) return false; cond_resched(); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ef4a55b9197a8f844ea0663138e902dcce3e2f36 ]

We're now getting the following error:

genirq: Setting trigger mode 1 for irq 230 failed (regmap_irq_set_type+0x0/0x15c) cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524

Cc: Sebastian Reichel sre@kernel.org Reported-by: Pavel Machek pavel@ucw.cz Tested-by: Pavel Machek pavel@ucw.cz Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index ddc7a7bb33c0..f57acf8f66b9 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -105,7 +105,7 @@ interrupts-extended = < &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 1 + &cpcap 48 0 >; interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld",

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e35e26b26e955c53e61c154ba26b9bb15da6b858 ]

A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed.

After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING.

The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well.

Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support") Signed-off-by: Carlo Caione ccaione@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Tested-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/meson.dtsi | 2 +- arch/arm/boot/dts/meson8b-odroidc1.dts | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 0d9faf1a51ea..a86b89086334 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -263,7 +263,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 58669abda259..a951a6632d0c 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -221,7 +221,6 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; - eee-broken-1000t; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted.

Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/meson8b-ec100.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 0872f6e3abf5..d50fc2f60fa3 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -205,8 +205,7 @@ cap-sd-highspeed; disable-wp;

- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

vmmc-supply = <&vcc_3v3>; };

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ee17e5d6201c66492a0e8053190fca2ed2b8457d ]

Eric Biggers reported:

The following commit, which went into v4.20, introduced undefined behavior when sys_rt_sigqueueinfo() is called with sig=0:

commit 4ce5f9c9e7546915c559ffae594e6d73f918db00 Author: Eric W. Biederman ebiederm@xmission.com Date: Tue Sep 25 12:59:31 2018 +0200

signal: Use a smaller struct siginfo in the kernel

In sig_specific_sicodes(), used from known_siginfo_layout(), the expression '1ULL << ((sig)-1)' is undefined as it evaluates to 1ULL << 4294967295.

Reproducer:

#include <signal.h> #include <sys/syscall.h> #include <unistd.h>

int main(void) { siginfo_t si = { .si_code = 1 }; syscall(__NR_rt_sigqueueinfo, 0, 0, &si); }

UBSAN report for v5.0-rc1:

UBSAN: Undefined behaviour in kernel/signal.c:2946:7 shift exponent 4294967295 is too large for 64-bit type 'long unsigned int' CPU: 2 PID: 346 Comm: syz_signal Not tainted 5.0.0-rc1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x70/0xa5 lib/dump_stack.c:113 ubsan_epilogue+0xd/0x40 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x12c/0x170 lib/ubsan.c:425 known_siginfo_layout+0xae/0xe0 kernel/signal.c:2946 post_copy_siginfo_from_user kernel/signal.c:3009 [inline] __copy_siginfo_from_user+0x35/0x60 kernel/signal.c:3035 __do_sys_rt_sigqueueinfo kernel/signal.c:3553 [inline] __se_sys_rt_sigqueueinfo kernel/signal.c:3549 [inline] __x64_sys_rt_sigqueueinfo+0x31/0x70 kernel/signal.c:3549 do_syscall_64+0x4c/0x1b0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x433639 Code: c4 18 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 27 00 00 c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffcb289fc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000081 RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000433639 RDX: 00007fffcb289fd0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000006b2018 R08: 000000000000004d R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401560 R13: 00000000004015f0 R14: 0000000000000000 R15: 0000000000000000

I have looked at the other callers of siginmask and they all appear to in locations where sig can not be zero.

I have looked at the code generation of adding an extra test against zero and gcc was able with a simple decrement instruction to combine the two tests together. So the at most adding this test cost a single cpu cycle. In practice that decrement instruction was already present as part of the mask comparison, so the only change was when the instruction was executed.

So given that it is cheap, and obviously correct to update siginmask to verify the signal is not zero. Fix this issue there to avoid any future problems.

Reported-by: Eric Biggers ebiggers@kernel.org Fixes: 4ce5f9c9e754 ("signal: Use a smaller struct siginfo in the kernel") Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/signal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/signal.h b/include/linux/signal.h index f428e86f4800..b5d99482d3fe 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -388,7 +388,7 @@ extern bool unhandled_signal(struct task_struct *tsk, int sig); #endif

#define siginmask(sig, mask) \ - ((sig) < SIGRTMIN && (rt_sigmask(sig) & (mask))) + ((sig) > 0 && (sig) < SIGRTMIN && (rt_sigmask(sig) & (mask)))

#define SIG_KERNEL_ONLY_MASK (\ rt_sigmask(SIGKILL) | rt_sigmask(SIGSTOP))

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 1ec6aaa520c1..09320caea54e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1160,6 +1160,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled";

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that already occurred, the existing code may acknowledge by mistake interrupts that occurred after the code checks for them.

Signed-off-by: Madalin Bucur madalin.bucur@nxp.com Signed-off-by: Roy Pledge roy.pledge@nxp.com Signed-off-by: Li Yang leoyang.li@nxp.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/fsl/qbman/qman.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c index 5ce24718c2fd..d8b3ba047c28 100644 --- a/drivers/soc/fsl/qbman/qman.c +++ b/drivers/soc/fsl/qbman/qman.c @@ -1124,18 +1124,19 @@ static void qm_mr_process_task(struct work_struct *work); static irqreturn_t portal_isr(int irq, void *ptr) { struct qman_portal *p = ptr; - - u32 clear = QM_DQAVAIL_MASK | p->irq_sources; u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources; + u32 clear = 0;

if (unlikely(!is)) return IRQ_NONE;

/* DQRR-handling if it's interrupt-driven */ - if (is & QM_PIRQ_DQRI) + if (is & QM_PIRQ_DQRI) { __poll_portal_fast(p, QMAN_POLL_LIMIT); + clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI; + } /* Handling of anything else that's interrupt-driven */ - clear |= __poll_portal_slow(p, is); + clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW; qm_out(&p->p, QM_REG_ISR, clear); return IRQ_HANDLED; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 13e62626c578d9889ebbda7c521be5adff9bef8e ]

During "wlan-up", we are programming the FW into the WiFi-chip. However, re-programming the FW doesn't work, unless a power cycle of the WiFi-chip is made in-between the programmings.

To conform to this requirement and to fix the regression in a simple way, let's start by allowing that the SDIO card (WiFi-chip) may stay powered on (runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the current code is to treat this scenario as an error, but unfortunate this doesn't work as expected, so let's fix this.

The other part is to guarantee that a power cycle of the SDIO card has been completed when wl12xx_sdio_power_on() returns, as to allow the FW programming to succeed. However, relying solely on runtime PM to deal with this isn't sufficient. For example, userspace may prevent runtime suspend via sysfs for the device that represents the SDIO card, leading to that the mmc core also keeps it powered on. For this reason, let's instead do a brute force power cycle in wl12xx_sdio_power_on().

Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling") Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Tested-by: Tony Lindgren tony@atomide.com Tested-by: Anders Roxell anders.roxell@linaro.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wlcore/sdio.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index bd10165d7eec..4d4b07701149 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -164,6 +164,12 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) }

sdio_claim_host(func); + /* + * To guarantee that the SDIO card is power cycled, as required to make + * the FW programming to succeed, let's do a brute force HW reset. + */ + mmc_hw_reset(card->host); + sdio_enable_func(func); sdio_release_host(func);

@@ -174,20 +180,13 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) { struct sdio_func *func = dev_to_sdio_func(glue->dev); struct mmc_card *card = func->card; - int error;

sdio_claim_host(func); sdio_disable_func(func); sdio_release_host(func);

/* Let runtime PM know the card is powered off */ - error = pm_runtime_put(&card->dev); - if (error < 0 && error != -EBUSY) { - dev_err(&card->dev, "%s failed: %i\n", __func__, error); - - return error; - } - + pm_runtime_put(&card->dev); return 0; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b0ca5ecb8e2279d706261f525f1bd0ba9e3fe800 ]

When updating a percpu map, bpftool currently copies the provided value only into the first per CPU copy of the specified value, all others instances are left zeroed.

This change explicitly copies the user-provided bytes to all the per CPU instances, keeping the sub-command syntax unchanged.

v2 -> v3: - drop unused argument, as per Quentin's suggestion v1 -> v2: - rename the helper as per Quentin's suggestion

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Quentin Monnet quentin.monnet@netronome.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/map.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)

diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index 9988d5c126b6..94094168c4a6 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -439,6 +439,20 @@ static char **parse_bytes(char **argv, const char *name, unsigned char *val, return argv + i; }

+/* on per cpu maps we must copy the provided value on all value instances */ +static void fill_per_cpu_value(struct bpf_map_info *info, void *value) +{ + unsigned int i, n, step; + + if (!map_is_per_cpu(info->type)) + return; + + n = get_possible_cpus(); + step = round_up(info->value_size, 8); + for (i = 1; i < n; i++) + memcpy(value + i * step, value, info->value_size); +} + static int parse_elem(char **argv, struct bpf_map_info *info, void *key, void *value, __u32 key_size, __u32 value_size, __u32 *flags, __u32 **value_fd) @@ -518,6 +532,8 @@ static int parse_elem(char **argv, struct bpf_map_info *info, argv = parse_bytes(argv, "value", value, value_size); if (!argv) return -1; + + fill_per_cpu_value(info, value); }

return parse_elem(argv, info, key, NULL, key_size, value_size,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free of devm_ allocated data is invalid.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions") Signed-off-by: Peng Hao peng.hao2@zte.com.cn [title's prefix changed] Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/plat-pxa/ssp.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index ed36dcab80f1..f51919974183 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -190,8 +190,6 @@ static int pxa_ssp_remove(struct platform_device *pdev) if (ssp == NULL) return -ENODEV;

- iounmap(ssp->mmio_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res));

@@ -201,7 +199,6 @@ static int pxa_ssp_remove(struct platform_device *pdev) list_del(&ssp->node); mutex_unlock(&ssp_lock);

- kfree(ssp); return 0; }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ac9c908eecde3ed252cb1d67fc79b3c1346f76bc ]

Wrong polarity of card detect GPIO pin leads to the system not booting from external mmc, if the back cover of N900 is closed. When the cover is open the system boots fine.

This wasn't noticed before, because of a bug, which was fixed by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO CD and WP).

Kernels up to 4.19 ignored the card detect GPIO from DT.

Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP") Signed-off-by: Arthur Demchenkov spinal.by@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap3-n900.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 182a53991c90..826920e6b878 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -814,7 +814,7 @@ /* For debugging, it is often good idea to remove this GPIO. It means you can remove back cover (to reboot by removing battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ + cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ };

/* most boards use vaux3, only some old versions use vmmc2 instead */

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index b29fe80d7288..461612a5ab5e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -397,7 +397,7 @@ };

intc: interrupt-controller@9bc0000 { - compatible = "arm,gic-v3"; + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; #redistributor-regions = <1>;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 70999ec1c9d3f783a7232973cfc26971e5732758 ]

The interrupt number set in the devicetree node of the DMA driver was wrong.

Signed-off-by: Paul Cercueil paul@crapouillou.net Signed-off-by: Paul Burton paul.burton@mips.com Cc: Rob Herring robh+dt@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 6fb16fd24035..2beb78a62b7d 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -161,7 +161,7 @@ #dma-cells = <2>;

interrupt-parent = <&intc>; - interrupts = <29>; + interrupts = <20>;

clocks = <&cgu JZ4740_CLK_DMA>;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell anders.roxell@linaro.org Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index d7312eed6088..91ea3083e7ad 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -21,7 +21,7 @@ config AB8500_USB

config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y' select USB_PHY help

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6479450f72c1391c03f08affe0d0110f41ae7ca0 ]

1. In current implementation, every VLPI will temporarily be mapped to the first CPU in system (normally CPU0) and then moved to the real scheduled CPU later.

2. So there is a time window and a VLPI may be sent to CPU0 instead of the real scheduled vCPU, in a multi-CPU virtual machine.

3. However, CPU0 may have not been scheduled as a virtual CPU after system boots up, so the value of its GICR_VPROPBASER is unknown at that moment.

4. If the INTID of VLPI is larger than 2^(GICR_VPROPBASER.IDbits+1), while IDbits is also in unknown state, GIC will behave as if the VLPI is out of range and simply drop it, which results in interrupt missing in Guest.

As no code will clear GICR_VPROPBASER at runtime, we can safely initialize the IDbits field at boot time for each CPU to get rid of this issue.

We also clear Valid bit of GICR_VPENDBASER in case any ancient programming gets left in and causes memory corrupting. A new function its_clear_vpend_valid() is added to reuse the code in its_vpe_deschedule().

Fixes: e643d8034036 ("irqchip/gic-v3-its: Add VPE scheduling") Signed-off-by: Heyi Guo guoheyi@huawei.com Signed-off-by: Heyi Guo heyi.guo@linaro.org Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-v3-its.c | 66 ++++++++++++++++++++++++-------- 1 file changed, 49 insertions(+), 17 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 350f999d205b..f25ec92f23ee 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2065,6 +2065,29 @@ static int __init allocate_lpi_tables(void) return 0; }

+static u64 its_clear_vpend_valid(void __iomem *vlpi_base) +{ + u32 count = 1000000; /* 1s! */ + bool clean; + u64 val; + + val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER); + val &= ~GICR_VPENDBASER_Valid; + gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER); + + do { + val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER); + clean = !(val & GICR_VPENDBASER_Dirty); + if (!clean) { + count--; + cpu_relax(); + udelay(1); + } + } while (!clean && count); + + return val; +} + static void its_cpu_init_lpis(void) { void __iomem *rbase = gic_data_rdist_rd_base(); @@ -2150,6 +2173,30 @@ static void its_cpu_init_lpis(void) val |= GICR_CTLR_ENABLE_LPIS; writel_relaxed(val, rbase + GICR_CTLR);

+ if (gic_rdists->has_vlpis) { + void __iomem *vlpi_base = gic_data_rdist_vlpi_base(); + + /* + * It's possible for CPU to receive VLPIs before it is + * sheduled as a vPE, especially for the first CPU, and the + * VLPI with INTID larger than 2^(IDbits+1) will be considered + * as out of range and dropped by GIC. + * So we initialize IDbits to known value to avoid VLPI drop. + */ + val = (LPI_NRBITS - 1) & GICR_VPROPBASER_IDBITS_MASK; + pr_debug("GICv4: CPU%d: Init IDbits to 0x%llx for GICR_VPROPBASER\n", + smp_processor_id(), val); + gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER); + + /* + * Also clear Valid bit of GICR_VPENDBASER, in case some + * ancient programming gets left in and has possibility of + * corrupting memory. + */ + val = its_clear_vpend_valid(vlpi_base); + WARN_ON(val & GICR_VPENDBASER_Dirty); + } + /* Make sure the GIC has seen the above */ dsb(sy); out: @@ -2776,26 +2823,11 @@ static void its_vpe_schedule(struct its_vpe *vpe) static void its_vpe_deschedule(struct its_vpe *vpe) { void __iomem *vlpi_base = gic_data_rdist_vlpi_base(); - u32 count = 1000000; /* 1s! */ - bool clean; u64 val;

- /* We're being scheduled out */ - val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER); - val &= ~GICR_VPENDBASER_Valid; - gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER); - - do { - val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER); - clean = !(val & GICR_VPENDBASER_Dirty); - if (!clean) { - count--; - cpu_relax(); - udelay(1); - } - } while (!clean && count); + val = its_clear_vpend_valid(vlpi_base);

- if (unlikely(!clean && !count)) { + if (unlikely(val & GICR_VPENDBASER_Dirty)) { pr_err_ratelimited("ITS virtual pending table not cleaning\n"); vpe->idai = false; vpe->pending_last = true;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop, where the firmware running on the "secure processor" bit-bangs the PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful when asked for documentation. Aside from the SP bit, there are probably priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser course of action compared to just turning them off.

Signed-off-by: Lubomir Rintel lkundrak@v3.sk Acked-by: Pavel Machek pavel@ucw.cz [maz: fixed-up subject and commit message] Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-mmp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c index 25f32e1d7764..3496b61a312a 100644 --- a/drivers/irqchip/irq-mmp.c +++ b/drivers/irqchip/irq-mmp.c @@ -34,6 +34,9 @@ #define SEL_INT_PENDING (1 << 6) #define SEL_INT_NUM_MASK 0x3f

+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ (1 << 5) +#define MMP2_ICU_INT_ROUTE_PJ4_FIQ (1 << 6) + struct icu_chip_data { int nr_irqs; unsigned int virq_base; @@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = { static const struct mmp_intc_conf mmp2_conf = { .conf_enable = 0x20, .conf_disable = 0x0, - .conf_mask = 0x7f, + .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ | + MMP2_ICU_INT_ROUTE_PJ4_FIQ, };

static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit afeff4c16edaa6275b903f82b0561406259aa3a3 ]

Check if the device is root rather before attempting to see what speeds the pcie port supports. Fixes a crash with pci passthrough in a VM.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366 Reviewed-by: Evan Quan evan.quan@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/ci_dpm.c | 5 +++-- drivers/gpu/drm/radeon/si_dpm.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c index d587779a80b4..a97294ac96d5 100644 --- a/drivers/gpu/drm/radeon/ci_dpm.c +++ b/drivers/gpu/drm/radeon/ci_dpm.c @@ -5676,7 +5676,7 @@ int ci_dpm_init(struct radeon_device *rdev) u16 data_offset, size; u8 frev, crev; struct ci_power_info *pi; - enum pci_bus_speed speed_cap; + enum pci_bus_speed speed_cap = PCI_SPEED_UNKNOWN; struct pci_dev *root = rdev->pdev->bus->self; int ret;

@@ -5685,7 +5685,8 @@ int ci_dpm_init(struct radeon_device *rdev) return -ENOMEM; rdev->pm.dpm.priv = pi;

- speed_cap = pcie_get_speed_cap(root); + if (!pci_is_root_bus(rdev->pdev->bus)) + speed_cap = pcie_get_speed_cap(root); if (speed_cap == PCI_SPEED_UNKNOWN) { pi->sys_pcie_mask = 0; } else { diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 8fb60b3af015..0a785ef0ab66 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -6899,7 +6899,7 @@ int si_dpm_init(struct radeon_device *rdev) struct ni_power_info *ni_pi; struct si_power_info *si_pi; struct atom_clock_dividers dividers; - enum pci_bus_speed speed_cap; + enum pci_bus_speed speed_cap = PCI_SPEED_UNKNOWN; struct pci_dev *root = rdev->pdev->bus->self; int ret;

@@ -6911,7 +6911,8 @@ int si_dpm_init(struct radeon_device *rdev) eg_pi = &ni_pi->eg; pi = &eg_pi->rv7xx;

- speed_cap = pcie_get_speed_cap(root); + if (!pci_is_root_bus(rdev->pdev->bus)) + speed_cap = pcie_get_speed_cap(root); if (speed_cap == PCI_SPEED_UNKNOWN) { si_pi->sys_pcie_mask = 0; } else {

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu joabreu@synopsys.com Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++++++---- include/linux/stmmac.h | 1 + 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 9caf79ba5ef1..4d5fb4b51cc4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -719,8 +719,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);

- if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + }

return (usec * (clk / 1000000)) / 256; } @@ -729,8 +732,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);

- if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + }

return (riwt * 256) / (clk / 1000000); } diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 7ddfc65586b0..4335bd771ce5 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -184,6 +184,7 @@ struct plat_stmmacenet_data { struct clk *pclk; struct clk *clk_ptp_ref; unsigned int clk_ptp_rate; + unsigned int clk_ref_rate; struct reset_control *stmmac_rst; struct stmmac_axi *axi; int has_gmac4;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's bits [7:4] as ITT_entry_size instead of [8:4]. Although this is pretty annoying, it only results in a potential over-allocation of memory, and nothing bad happens.

Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties") Signed-off-by: Zenghui Yu yuzenghui@huawei.com [maz: massaged subject and commit message] Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/irqchip/arm-gic-v3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 071b4cbdf010..c848a7cc502e 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -319,7 +319,7 @@ #define GITS_TYPER_PLPIS (1UL << 0) #define GITS_TYPER_VLPIS (1UL << 1) #define GITS_TYPER_ITT_ENTRY_SIZE_SHIFT 4 -#define GITS_TYPER_ITT_ENTRY_SIZE(r) ((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0x1f) + 1) +#define GITS_TYPER_ITT_ENTRY_SIZE(r) ((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0xf) + 1) #define GITS_TYPER_IDBITS_SHIFT 8 #define GITS_TYPER_DEVBITS_SHIFT 13 #define GITS_TYPER_DEVBITS(r) ((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2c2008a63e482654ab137c84d3c61c03b75e7df6 ]

WCN3990 is SNOC, not PCI. This prevents probing WCN3990.

Fixes: 367c899f622c ("ath10k: add bus type check in ath10k_init_hw_params") Signed-off-by: Brian Norris briannorris@chromium.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 59fdda67f89f..0a3b2c45549e 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -548,7 +548,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { { .id = WCN3990_HW_1_0_DEV_VERSION, .dev_id = 0, - .bus = ATH10K_BUS_PCI, + .bus = ATH10K_BUS_SNOC, .name = "wcn3990 hw1.0", .continuous_frag_desc = true, .tx_chain_mask = 0x7,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6cab5e90ab2bd323c9f3811b6c70a4687df51e27 ]

Disabled preemption is necessary for proper access to per-cpu maps from BPF programs.

But the sender side of socket filters didn't have preemption disabled: unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN

and a combination of af_packet with tun device didn't disable either: tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue-> tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN

Disable preemption before executing BPF programs (both classic and extended).

Reported-by: Jann Horn jannh@google.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Song Liu songliubraving@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/filter.h | 21 ++++++++++++++++++--- kernel/bpf/cgroup.c | 2 +- 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h index b776626aeb84..958eddbc44d3 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -591,8 +591,8 @@ static inline u8 *bpf_skb_cb(struct sk_buff *skb) return qdisc_skb_cb(skb)->data; }

-static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog, - struct sk_buff *skb) +static inline u32 __bpf_prog_run_save_cb(const struct bpf_prog *prog, + struct sk_buff *skb) { u8 *cb_data = bpf_skb_cb(skb); u8 cb_saved[BPF_SKB_CB_LEN]; @@ -611,15 +611,30 @@ static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog, return res; }

+static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog, + struct sk_buff *skb) +{ + u32 res; + + preempt_disable(); + res = __bpf_prog_run_save_cb(prog, skb); + preempt_enable(); + return res; +} + static inline u32 bpf_prog_run_clear_cb(const struct bpf_prog *prog, struct sk_buff *skb) { u8 *cb_data = bpf_skb_cb(skb); + u32 res;

if (unlikely(prog->cb_access)) memset(cb_data, 0, BPF_SKB_CB_LEN);

- return BPF_PROG_RUN(prog, skb); + preempt_disable(); + res = BPF_PROG_RUN(prog, skb); + preempt_enable(); + return res; }

static __always_inline u32 bpf_prog_run_xdp(const struct bpf_prog *prog, diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index 9425c2fb872f..6c24b1fb2db8 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -572,7 +572,7 @@ int __cgroup_bpf_run_filter_skb(struct sock *sk, bpf_compute_and_save_data_end(skb, &saved_data_end);

ret = BPF_PROG_RUN_ARRAY(cgrp->bpf.effective[type], skb, - bpf_prog_run_save_cb); + __bpf_prog_run_save_cb); bpf_restore_data_end(skb, saved_data_end); __skb_pull(skb, offset); skb->sk = save_sk;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e16ec34039c701594d55d08a5aa49ee3e1abc821 ]

Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex: [ 13.007000] WARNING: possible circular locking dependency detected [ 13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted [ 13.008124] ------------------------------------------------------ [ 13.008624] test_progs/246 is trying to acquire lock: [ 13.009030] 0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300 [ 13.009770] [ 13.009770] but task is already holding lock: [ 13.010239] 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60 [ 13.010877] [ 13.010877] which lock already depends on the new lock. [ 13.010877] [ 13.011532] [ 13.011532] the existing dependency chain (in reverse order) is: [ 13.012129] [ 13.012129] -> #4 (bpf_event_mutex){+.+.}: [ 13.012582] perf_event_query_prog_array+0x9b/0x130 [ 13.013016] _perf_ioctl+0x3aa/0x830 [ 13.013354] perf_ioctl+0x2e/0x50 [ 13.013668] do_vfs_ioctl+0x8f/0x6a0 [ 13.014003] ksys_ioctl+0x70/0x80 [ 13.014320] __x64_sys_ioctl+0x16/0x20 [ 13.014668] do_syscall_64+0x4a/0x180 [ 13.015007] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.015469] [ 13.015469] -> #3 (&cpuctx_mutex){+.+.}: [ 13.015910] perf_event_init_cpu+0x5a/0x90 [ 13.016291] perf_event_init+0x1b2/0x1de [ 13.016654] start_kernel+0x2b8/0x42a [ 13.016995] secondary_startup_64+0xa4/0xb0 [ 13.017382] [ 13.017382] -> #2 (pmus_lock){+.+.}: [ 13.017794] perf_event_init_cpu+0x21/0x90 [ 13.018172] cpuhp_invoke_callback+0xb3/0x960 [ 13.018573] _cpu_up+0xa7/0x140 [ 13.018871] do_cpu_up+0xa4/0xc0 [ 13.019178] smp_init+0xcd/0xd2 [ 13.019483] kernel_init_freeable+0x123/0x24f [ 13.019878] kernel_init+0xa/0x110 [ 13.020201] ret_from_fork+0x24/0x30 [ 13.020541] [ 13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}: [ 13.021051] static_key_slow_inc+0xe/0x20 [ 13.021424] tracepoint_probe_register_prio+0x28c/0x300 [ 13.021891] perf_trace_event_init+0x11f/0x250 [ 13.022297] perf_trace_init+0x6b/0xa0 [ 13.022644] perf_tp_event_init+0x25/0x40 [ 13.023011] perf_try_init_event+0x6b/0x90 [ 13.023386] perf_event_alloc+0x9a8/0xc40 [ 13.023754] __do_sys_perf_event_open+0x1dd/0xd30 [ 13.024173] do_syscall_64+0x4a/0x180 [ 13.024519] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.024968] [ 13.024968] -> #0 (tracepoints_mutex){+.+.}: [ 13.025434] __mutex_lock+0x86/0x970 [ 13.025764] tracepoint_probe_register_prio+0x2d/0x300 [ 13.026215] bpf_probe_register+0x40/0x60 [ 13.026584] bpf_raw_tracepoint_open.isra.34+0xa4/0x130 [ 13.027042] __do_sys_bpf+0x94f/0x1a90 [ 13.027389] do_syscall_64+0x4a/0x180 [ 13.027727] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.028171] [ 13.028171] other info that might help us debug this: [ 13.028171] [ 13.028807] Chain exists of: [ 13.028807] tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex [ 13.028807] [ 13.029666] Possible unsafe locking scenario: [ 13.029666] [ 13.030140] CPU0 CPU1 [ 13.030510] ---- ---- [ 13.030875] lock(bpf_event_mutex); [ 13.031166] lock(&cpuctx_mutex); [ 13.031645] lock(bpf_event_mutex); [ 13.032135] lock(tracepoints_mutex); [ 13.032441] [ 13.032441] *** DEADLOCK *** [ 13.032441] [ 13.032911] 1 lock held by test_progs/246: [ 13.033239] #0: 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60 [ 13.033909] [ 13.033909] stack backtrace: [ 13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477 [ 13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 13.035657] Call Trace: [ 13.035859] dump_stack+0x5f/0x8b [ 13.036130] print_circular_bug.isra.37+0x1ce/0x1db [ 13.036526] __lock_acquire+0x1158/0x1350 [ 13.036852] ? lock_acquire+0x98/0x190 [ 13.037154] lock_acquire+0x98/0x190 [ 13.037447] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.037876] __mutex_lock+0x86/0x970 [ 13.038167] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.038600] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.039028] ? __mutex_lock+0x86/0x970 [ 13.039337] ? __mutex_lock+0x24a/0x970 [ 13.039649] ? bpf_probe_register+0x1d/0x60 [ 13.039992] ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10 [ 13.040478] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.040906] tracepoint_probe_register_prio+0x2d/0x300 [ 13.041325] bpf_probe_register+0x40/0x60 [ 13.041649] bpf_raw_tracepoint_open.isra.34+0xa4/0x130 [ 13.042068] ? __might_fault+0x3e/0x90 [ 13.042374] __do_sys_bpf+0x94f/0x1a90 [ 13.042678] do_syscall_64+0x4a/0x180 [ 13.042975] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.043382] RIP: 0033:0x7f23b10a07f9 [ 13.045155] RSP: 002b:00007ffdef42fdd8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 13.045759] RAX: ffffffffffffffda RBX: 00007ffdef42ff70 RCX: 00007f23b10a07f9 [ 13.046326] RDX: 0000000000000070 RSI: 00007ffdef42fe10 RDI: 0000000000000011 [ 13.046893] RBP: 00007ffdef42fdf0 R08: 0000000000000038 R09: 00007ffdef42fe10 [ 13.047462] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 13.048029] R13: 0000000000000016 R14: 00007f23b1db4690 R15: 0000000000000000

Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister() there is no need to take bpf_event_mutex too. bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs. bpf_raw_tracepoints don't need to take this mutex.

Fixes: c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT") Acked-by: Martin KaFai Lau kafai@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/bpf_trace.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 9864a35c8bb5..6c28d519447d 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -1158,22 +1158,12 @@ static int __bpf_probe_register(struct bpf_raw_event_map *btp, struct bpf_prog *

int bpf_probe_register(struct bpf_raw_event_map *btp, struct bpf_prog *prog) { - int err; - - mutex_lock(&bpf_event_mutex); - err = __bpf_probe_register(btp, prog); - mutex_unlock(&bpf_event_mutex); - return err; + return __bpf_probe_register(btp, prog); }

int bpf_probe_unregister(struct bpf_raw_event_map *btp, struct bpf_prog *prog) { - int err; - - mutex_lock(&bpf_event_mutex); - err = tracepoint_probe_unregister(btp->tp, (void *)btp->bpf_func, prog); - mutex_unlock(&bpf_event_mutex); - return err; + return tracepoint_probe_unregister(btp->tp, (void *)btp->bpf_func, prog); }

int bpf_get_perf_event_info(const struct perf_event *event, u32 *prog_id,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 12292519d919ecde92e7e7c8acbcdb9f0c7c6013 ]

Fixes doorbell reflection on Vega20.

Change-Id: I0495139d160a9032dff5977289b1eec11c16f781 Signed-off-by: Jay Cornwall Jay.Cornwall@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c index f8cee95d61cc..7d5cbadbe1cb 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c +++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c @@ -92,7 +92,20 @@ static void nbio_v7_4_enable_doorbell_aperture(struct amdgpu_device *adev, static void nbio_v7_4_enable_doorbell_selfring_aperture(struct amdgpu_device *adev, bool enable) { + u32 tmp = 0;

+ if (enable) { + tmp = REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_EN, 1) | + REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_MODE, 1) | + REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_SIZE, 0); + + WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_BASE_LOW, + lower_32_bits(adev->doorbell.base)); + WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_BASE_HIGH, + upper_32_bits(adev->doorbell.base)); + } + + WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_CNTL, tmp); }

static void nbio_v7_4_ih_doorbell_range(struct amdgpu_device *adev,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski paul.kocialkowski@bootlin.com Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.ko... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index f949287d926c..4e0562aa2cc9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -760,6 +760,7 @@ static int sun4i_tcon_init_clocks(struct device *dev, return PTR_ERR(tcon->sclk0); } } + clk_prepare_enable(tcon->sclk0);

if (tcon->quirks->has_channel_1) { tcon->sclk1 = devm_clk_get(dev, "tcon-ch1"); @@ -774,6 +775,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,

static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon) { + clk_disable_unprepare(tcon->sclk0); clk_disable_unprepare(tcon->clk); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699 Reported-by: Yan Fu yafu@redhat.com Signed-off-by: Stefano Garzarella sgarzare@redhat.com Acked-by: Stefan Hajnoczi stefanha@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index 5d3cce9e8744..9dae54698737 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -75,6 +75,9 @@ static u32 virtio_transport_get_local_cid(void) { struct virtio_vsock *vsock = virtio_vsock_get();

+ if (!vsock) + return VMADDR_CID_ANY; + return vsock->guest_cid; }

@@ -584,10 +587,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)

virtio_vsock_update_guest_cid(vsock);

- ret = vsock_core_init(&virtio_transport.transport); - if (ret < 0) - goto out_vqs; - vsock->rx_buf_nr = 0; vsock->rx_buf_max_nr = 0; atomic_set(&vsock->queued_replies, 0); @@ -618,8 +617,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev) mutex_unlock(&the_virtio_vsock_mutex); return 0;

-out_vqs: - vsock->vdev->config->del_vqs(vsock->vdev); out: kfree(vsock); mutex_unlock(&the_virtio_vsock_mutex); @@ -669,7 +666,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)

mutex_lock(&the_virtio_vsock_mutex); the_virtio_vsock = NULL; - vsock_core_exit(); mutex_unlock(&the_virtio_vsock_mutex);

vdev->config->del_vqs(vdev); @@ -702,14 +698,28 @@ static int __init virtio_vsock_init(void) virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0); if (!virtio_vsock_workqueue) return -ENOMEM; + ret = register_virtio_driver(&virtio_vsock_driver); if (ret) - destroy_workqueue(virtio_vsock_workqueue); + goto out_wq; + + ret = vsock_core_init(&virtio_transport.transport); + if (ret) + goto out_vdr; + + return 0; + +out_vdr: + unregister_virtio_driver(&virtio_vsock_driver); +out_wq: + destroy_workqueue(virtio_vsock_workqueue); return ret; + }

static void __exit virtio_vsock_exit(void) { + vsock_core_exit(); unregister_virtio_driver(&virtio_vsock_driver); destroy_workqueue(virtio_vsock_workqueue); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else.

[ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams dan.j.williams@intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/dmatest.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index aa1712beb0cc..7b7fba0c9253 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -642,11 +642,9 @@ static int dmatest_func(void *data) srcs[i] = um->addr[i] + src_off; ret = dma_mapping_error(dev->dev, um->addr[i]); if (ret) { - dmaengine_unmap_put(um); result("src mapping error", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; } um->to_cnt++; } @@ -661,11 +659,9 @@ static int dmatest_func(void *data) DMA_BIDIRECTIONAL); ret = dma_mapping_error(dev->dev, dsts[i]); if (ret) { - dmaengine_unmap_put(um); result("dst mapping error", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; } um->bidi_cnt++; } @@ -693,12 +689,10 @@ static int dmatest_func(void *data) }

if (!tx) { - dmaengine_unmap_put(um); result("prep error", total_tests, src_off, dst_off, len, ret); msleep(100); - failed_tests++; - continue; + goto error_unmap_continue; }

done->done = false; @@ -707,12 +701,10 @@ static int dmatest_func(void *data) cookie = tx->tx_submit(tx);

if (dma_submit_error(cookie)) { - dmaengine_unmap_put(um); result("submit error", total_tests, src_off, dst_off, len, ret); msleep(100); - failed_tests++; - continue; + goto error_unmap_continue; } dma_async_issue_pending(chan);

@@ -725,16 +717,14 @@ static int dmatest_func(void *data) dmaengine_unmap_put(um); result("test timed out", total_tests, src_off, dst_off, len, 0); - failed_tests++; - continue; + goto error_unmap_continue; } else if (status != DMA_COMPLETE) { dmaengine_unmap_put(um); result(status == DMA_ERROR ? "completion error status" : "completion busy status", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; }

dmaengine_unmap_put(um); @@ -779,6 +769,12 @@ static int dmatest_func(void *data) verbose_result("test passed", total_tests, src_off, dst_off, len, 0); } + + continue; + +error_unmap_continue: + dmaengine_unmap_put(um); + failed_tests++; } ktime = ktime_sub(ktime_get(), ktime); ktime = ktime_sub(ktime, comparetime);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++ 2 files changed, 763 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 47ed6cef93fb..c9ff2b47bd1c 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests

-TEST_PROGS := nft_trans_stress.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh

include ../lib.mk diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh new file mode 100755 index 000000000000..8ec76681605c --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -0,0 +1,762 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 addr add 10.0.1.1/24 dev veth0 +ip -net ns0 addr add dead:1::1/64 dev veth0 + +ip -net ns0 link set veth1 up +ip -net ns0 addr add 10.0.2.1/24 dev veth1 +ip -net ns0 addr add dead:2::1/64 dev veth1 + +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i route add default via 10.0.$i.1 + ip -net ns$i addr add dead:$i::99/64 dev eth0 + ip -net ns$i route add default via dead:$i::1 +done + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter $counter 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in "packets 1 bytes 84" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out "packets 1 bytes 84" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in6 "$expect" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out6 "$expect" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in6 "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out "packets 0 bytes 0" + lret=1 + fi + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out6 "packets 0 bytes 0" + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir "$expect" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir6 "$expect" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in 0 1 2;do + ip netns exec ns$i nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add ip6 dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + ip netns exec ns0 nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat to 10.0.2.99 + } +} +EOF + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + + ip netns exec ns0 nft flush chain ip nat output + + reset_counters + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns1$dir "$expect" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0$dir "$expect" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns2$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + + return $lret +} + + +test_masquerade6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 via ipv6" + return 1 + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip6 nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + + return $lret +} + +test_masquerade() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: canot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + + return $lret +} + +test_redirect6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip6 nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete ip6 nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + + return $lret +} + +test_redirect() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP redirection for ns2" + + return $lret +} + + +# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +for i in 0 1 2; do +ip netns exec ns$i nft -f - <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +sleep 3 +# test basic connectivity +for i in 1 2; do + ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi + check_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + + check_ns0_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + reset_counters +done + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" +fi + +reset_counters +test_local_dnat +test_local_dnat6 + +reset_counters +test_masquerade +test_masquerade6 + +reset_counters +test_redirect +test_redirect6 + +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 5065b2dd3e5f9247a6c9d67974bc0472bf561b9d ]

Whenever we fail before/while starting an IO, make sure to release the IO buffer. Usually qeth_irq() would do this for us, but if the IO doesn't even start we obviously won't get an interrupt for it either.

Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/net/qeth_core_main.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 0c9a5250dd93..623ddda5d2ba 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -568,6 +568,7 @@ static int __qeth_issue_next_read(struct qeth_card *card) QETH_DBF_MESSAGE(2, "error %i on device %x when starting next read ccw!\n", rc, CARD_DEVID(card)); atomic_set(&channel->irq_pending, 0); + qeth_release_buffer(channel, iob); card->read_or_write_problem = 1; qeth_schedule_recovery(card); wake_up(&card->wait_q); @@ -1129,6 +1130,8 @@ static void qeth_irq(struct ccw_device *cdev, unsigned long intparm, rc = qeth_get_problem(card, cdev, irb); if (rc) { card->read_or_write_problem = 1; + if (iob) + qeth_release_buffer(iob->channel, iob); qeth_clear_ipacmd_list(card); qeth_schedule_recovery(card); goto out; @@ -1811,6 +1814,7 @@ static int qeth_idx_activate_get_answer(struct qeth_card *card, QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc); QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); atomic_set(&channel->irq_pending, 0); + qeth_release_buffer(channel, iob); wake_up(&card->wait_q); return rc; } @@ -1880,6 +1884,7 @@ static int qeth_idx_activate_channel(struct qeth_card *card, rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); atomic_set(&channel->irq_pending, 0); + qeth_release_buffer(channel, iob); wake_up(&card->wait_q); return rc; } @@ -2060,6 +2065,7 @@ int qeth_send_control_data(struct qeth_card *card, int len, } reply = qeth_alloc_reply(card); if (!reply) { + qeth_release_buffer(channel, iob); return -ENOMEM; } reply->callback = reply_cb;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c2780c1a3fb724560b1d44f7976e0de17bf153c7 ]

A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card.

Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/net/qeth_core.h | 1 + drivers/s390/net/qeth_l2_main.c | 2 ++ drivers/s390/net/qeth_l3_main.c | 1 + 3 files changed, 4 insertions(+)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 99af1a0a3314..8999be74c545 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -22,6 +22,7 @@ #include <linux/hashtable.h> #include <linux/ip.h> #include <linux/refcount.h> +#include <linux/workqueue.h>

#include <net/ipv6.h> #include <net/if_inet6.h> diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 8d3601891c62..49fa09c67d49 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -823,6 +823,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)

if (cgdev->state == CCWGROUP_ONLINE) qeth_l2_set_offline(cgdev); + + cancel_work_sync(&card->close_dev_work); if (qeth_netdev_is_registered(card->dev)) unregister_netdev(card->dev); } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index f08b745c2007..d1bf55b5c8e1 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2428,6 +2428,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_l3_set_offline(cgdev);

+ cancel_work_sync(&card->close_dev_work); if (qeth_netdev_is_registered(card->dev)) unregister_netdev(card->dev); qeth_l3_clear_ip_htable(card, 0);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols are added to its binary:

# nm perf | grep annobin | head -10 0000000000241100 t .annobin_annotate.c 0000000000326490 t .annobin_annotate.c 0000000000249255 t .annobin_annotate.c_end 00000000003283a8 t .annobin_annotate.c_end 00000000001bce18 t .annobin_annotate.c_end.hot 00000000001bce18 t .annobin_annotate.c_end.hot 00000000001bc3e2 t .annobin_annotate.c_end.unlikely 00000000001bc400 t .annobin_annotate.c_end.unlikely 00000000001bce18 t .annobin_annotate.c.hot 00000000001bce18 t .annobin_annotate.c.hot ...

Those symbols have no use for report or annotation and should be skipped. Moreover they interfere with the DWARF unwind test on the PPC arch, where they are mixed with checked symbols and then the test fails:

# perf test dwarf -v 59: Test dwarf unwind : --- start --- test child forked, pid 8515 unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc) ... got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

# readelf -s ./perf | grep annobin | head -1 40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter out such symbols.

Just to be awkward, if you are going to ignore STV_HIDDEN symbols then you should probably also ignore STV_INTERNAL ones as well... Annobin does not generate them, but you never know, one day some other tool might create some.

Signed-off-by: Jiri Olsa jolsa@kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Masami Hiramatsu mhiramat@kernel.org Cc: Michael Petlan mpetlan@redhat.com Cc: Namhyung Kim namhyung@kernel.org Cc: Nick Clifton nickc@redhat.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/symbol-elf.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index 66a84d5846c8..03cb8c6d620a 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -87,6 +87,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym) return GELF_ST_TYPE(sym->st_info); }

+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym) +{ + return GELF_ST_VISIBILITY(sym->st_other); +} + #ifndef STT_GNU_IFUNC #define STT_GNU_IFUNC 10 #endif @@ -111,7 +116,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym) return elf_sym__type(sym) == STT_NOTYPE && sym->st_name != 0 && sym->st_shndx != SHN_UNDEF && - sym->st_shndx != SHN_ABS; + sym->st_shndx != SHN_ABS && + elf_sym__visibility(sym) != STV_HIDDEN && + elf_sym__visibility(sym) != STV_INTERNAL; }

static bool elf_sym__filter(GElf_Sym *sym)

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e02e07e3127d8aec1f4bcdfb2fc52a2d99b4859e ]

On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and lld/scd is very weak ordering. We should add sync instructions "before each ll/lld" and "at the branch-target between ll/sc" to workaround. Otherwise, this flaw will cause deadlock occasionally (e.g. when doing heavy load test with LTP).

Below is the explaination of CPU designer:

"For Loongson 3 family, when a memory access instruction (load, store, or prefetch)'s executing occurs between the execution of LL and SC, the success or failure of SC is not predictable. Although programmer would not insert memory access instructions between LL and SC, the memory instructions before LL in program-order, may dynamically executed between the execution of LL/SC, so a memory fence (SYNC) is needed before LL/LLD to avoid this situation.

Since Loongson-3A R2 (3A2000), we have improved our hardware design to handle this case. But we later deduce a rarely circumstance that some speculatively executed memory instructions due to branch misprediction between LL/SC still fall into the above case, so a memory fence (SYNC) at branch-target (if its target is not between LL/SC) is needed for Loongson 3A1000, 3B1500, 3A2000 and 3A3000.

Our processor is continually evolving and we aim to to remove all these workaround-SYNCs around LL/SC for new-come processor."

Here is an example:

Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var, this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same time('sc' return 1), and the variable is only *added by 1*, sometimes, which is wrong and unacceptable(it should be added by 2).

Why disable fix-loongson3-llsc in compiler? Because compiler fix will cause problems in kernel's __ex_table section.

This patch fix all the cases in kernel, but:

+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix the ll and branch-target coincidently such as atomic_sub_if_positive/ cmpxchg/xchg, just like this one.

+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch edac.h

+. local_ops and cmpxchg_local should not be affected by this bug since only the owner can write.

+. mips_atomic_set for syscall.c is deprecated and rarely used, just let it go

Signed-off-by: Huacai Chen chenhc@lemote.com Signed-off-by: Huang Pei huangpei@loongson.cn [paul.burton@mips.com: - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add a comment describing why it's there. - Make loongson_llsc_mb() a no-op when CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory barrier. - Add a comment describing the bug & how loongson_llsc_mb() helps in asm/barrier.h.] Signed-off-by: Paul Burton paul.burton@mips.com Cc: Ralf Baechle ralf@linux-mips.org Cc: ambrosehua@gmail.com Cc: Steven J . Hill Steven.Hill@cavium.com Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang zhangfx@lemote.com Cc: Zhangjin Wu wuzhangjin@gmail.com Cc: Li Xuefeng lixuefeng@loongson.cn Cc: Xu Chenghua xuchenghua@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/Kconfig | 15 ++++++++++++++ arch/mips/include/asm/atomic.h | 6 ++++++ arch/mips/include/asm/barrier.h | 36 +++++++++++++++++++++++++++++++++ arch/mips/include/asm/bitops.h | 5 +++++ arch/mips/include/asm/futex.h | 3 +++ arch/mips/include/asm/pgtable.h | 2 ++ arch/mips/loongson64/Platform | 23 +++++++++++++++++++++ arch/mips/mm/tlbex.c | 10 +++++++++ 8 files changed, 100 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index bfb3d8451c0a..0fbd88489c04 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1400,6 +1400,21 @@ config LOONGSON3_ENHANCEMENT please say 'N' here. If you want a high-performance kernel to run on new Loongson 3 machines only, please say 'Y' here.

+config CPU_LOONGSON3_WORKAROUNDS + bool "Old Loongson 3 LLSC Workarounds" + default y if SMP + depends on CPU_LOONGSON3 + help + Loongson 3 processors have the llsc issues which require workarounds. + Without workarounds the system may hang unexpectedly. + + Newer Loongson 3 will fix these issues and no workarounds are needed. + The workarounds have no significant side effect on them but may + decrease the performance of the system so this option should be + disabled unless the kernel is intended to be run on old systems. + + If unsure, please say Y. + config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 9e805317847d..1fc6f04e85a1 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -58,6 +58,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v) \ if (kernel_uses_llsc) { \ int temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: ll %0, %1 # atomic_" #op " \n" \ @@ -84,6 +85,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v) \ if (kernel_uses_llsc) { \ int temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: ll %1, %2 # atomic_" #op "_return \n" \ @@ -116,6 +118,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v) \ if (kernel_uses_llsc) { \ int temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: ll %1, %2 # atomic_fetch_" #op " \n" \ @@ -251,6 +254,7 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v) \ if (kernel_uses_llsc) { \ long temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: lld %0, %1 # atomic64_" #op " \n" \ @@ -277,6 +281,7 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \ if (kernel_uses_llsc) { \ long temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: lld %1, %2 # atomic64_" #op "_return\n" \ @@ -309,6 +314,7 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v) \ if (kernel_uses_llsc) { \ long temp; \ \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set "MIPS_ISA_LEVEL" \n" \ "1: lld %1, %2 # atomic64_fetch_" #op "\n" \ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index a5eb1bb199a7..b7f6ac5e513c 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -222,6 +222,42 @@ #define __smp_mb__before_atomic() __smp_mb__before_llsc() #define __smp_mb__after_atomic() smp_llsc_mb()

+/* + * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load, + * store or pref) in between an ll & sc can cause the sc instruction to + * erroneously succeed, breaking atomicity. Whilst it's unusual to write code + * containing such sequences, this bug bites harder than we might otherwise + * expect due to reordering & speculation: + * + * 1) A memory access appearing prior to the ll in program order may actually + * be executed after the ll - this is the reordering case. + * + * In order to avoid this we need to place a memory barrier (ie. a sync + * instruction) prior to every ll instruction, in between it & any earlier + * memory access instructions. Many of these cases are already covered by + * smp_mb__before_llsc() but for the remaining cases, typically ones in + * which multiple CPUs may operate on a memory location but ordering is not + * usually guaranteed, we use loongson_llsc_mb() below. + * + * This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later. + * + * 2) If a conditional branch exists between an ll & sc with a target outside + * of the ll-sc loop, for example an exit upon value mismatch in cmpxchg() + * or similar, then misprediction of the branch may allow speculative + * execution of memory accesses from outside of the ll-sc loop. + * + * In order to avoid this we need a memory barrier (ie. a sync instruction) + * at each affected branch target, for which we also use loongson_llsc_mb() + * defined below. + * + * This case affects all current Loongson 3 CPUs. + */ +#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */ +#define loongson_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") +#else +#define loongson_llsc_mb() do { } while (0) +#endif + #include <asm-generic/barrier.h>

#endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index da1b8718861e..2a40ecd69ac4 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -68,6 +68,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) : "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m)); #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { + loongson_llsc_mb(); do { __asm__ __volatile__( " " __LL "%0, %1 # set_bit \n" @@ -78,6 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) } while (unlikely(!temp)); #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ } else if (kernel_uses_llsc) { + loongson_llsc_mb(); do { __asm__ __volatile__( " .set "MIPS_ISA_ARCH_LEVEL" \n" @@ -120,6 +122,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) : "ir" (~(1UL << bit))); #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { + loongson_llsc_mb(); do { __asm__ __volatile__( " " __LL "%0, %1 # clear_bit \n" @@ -130,6 +133,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) } while (unlikely(!temp)); #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ } else if (kernel_uses_llsc) { + loongson_llsc_mb(); do { __asm__ __volatile__( " .set "MIPS_ISA_ARCH_LEVEL" \n" @@ -188,6 +192,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp;

+ loongson_llsc_mb(); do { __asm__ __volatile__( " .set "MIPS_ISA_ARCH_LEVEL" \n" diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h index a9e61ea54ca9..0a62a91b592d 100644 --- a/arch/mips/include/asm/futex.h +++ b/arch/mips/include/asm/futex.h @@ -50,6 +50,7 @@ "i" (-EFAULT) \ : "memory"); \ } else if (cpu_has_llsc) { \ + loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ @@ -162,6 +163,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, "i" (-EFAULT) : "memory"); } else if (cpu_has_llsc) { + loongson_llsc_mb(); __asm__ __volatile__( "# futex_atomic_cmpxchg_inatomic \n" " .set push \n" @@ -190,6 +192,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) : "memory"); + loongson_llsc_mb(); } else return -ENOSYS;

diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 129e0328367f..6a35bbf46b93 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -229,6 +229,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval) : [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp) : [global] "r" (page_global)); } else if (kernel_uses_llsc) { + loongson_llsc_mb(); __asm__ __volatile__ ( " .set "MIPS_ISA_ARCH_LEVEL" \n" " .set push \n" @@ -244,6 +245,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval) " .set mips0 \n" : [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp) : [global] "r" (page_global)); + loongson_llsc_mb(); } #else /* !CONFIG_SMP */ if (pte_none(*buddy)) diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 0fce4608aa88..c1a4d4dc4665 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -23,6 +23,29 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS endif

cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap + +# +# Some versions of binutils, not currently mainline as of 2019/02/04, support +# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction +# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a +# description). +# +# We disable this in order to prevent the assembler meddling with the +# instruction that labels refer to, ie. if we label an ll instruction: +# +# 1: ll v0, 0(a0) +# +# ...then with the assembler fix applied the label may actually point at a sync +# instruction inserted by the assembler, and if we were using the label in an +# exception table the table would no longer contain the address of the ll +# instruction. +# +# Avoid this by explicitly disabling that assembler behaviour. If upstream +# binutils does not merge support for the flag then we can revisit & remove +# this later - for now it ensures vendor toolchains don't cause problems. +# +cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) + # # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a # as MIPS64 R2; older versions as just R1. This leaves the possibility open diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 067714291643..64db0400a8be 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -931,6 +931,8 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * to mimic that here by taking a load/istream page * fault. */ + if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS)) + uasm_i_sync(p, 0); UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0); uasm_i_jr(p, ptr);

@@ -1645,6 +1647,8 @@ static void iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr) { #ifdef CONFIG_SMP + if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS)) + uasm_i_sync(p, 0); # ifdef CONFIG_PHYS_ADDR_T_64BIT if (cpu_has_64bits) uasm_i_lld(p, pte, 0, ptr); @@ -2258,6 +2262,8 @@ static void build_r4000_tlb_load_handler(void) #endif

uasm_l_nopage_tlbl(&l, p); + if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS)) + uasm_i_sync(&p, 0); build_restore_work_registers(&p); #ifdef CONFIG_CPU_MICROMIPS if ((unsigned long)tlb_do_page_fault_0 & 1) { @@ -2312,6 +2318,8 @@ static void build_r4000_tlb_store_handler(void) #endif

uasm_l_nopage_tlbs(&l, p); + if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS)) + uasm_i_sync(&p, 0); build_restore_work_registers(&p); #ifdef CONFIG_CPU_MICROMIPS if ((unsigned long)tlb_do_page_fault_1 & 1) { @@ -2367,6 +2375,8 @@ static void build_r4000_tlb_modify_handler(void) #endif

uasm_l_nopage_tlbm(&l, p); + if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS)) + uasm_i_sync(&p, 0); build_restore_work_registers(&p); #ifdef CONFIG_CPU_MICROMIPS if ((unsigned long)tlb_do_page_fault_1 & 1) {

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit d8f6382a7d026989029e2e50c515df954488459b ]

This reverts commit bbc0f8bd88abefb0f27998f40a073634a3a2db89.

It added a warning whose intent was to check whether the rport was still linked into the peer list. It doesn't work as intended and gives false positive warnings for two reasons:

1) If the rport is never linked into the peer list it will not be considered empty since the list_head is never initialized.

2) If the rport is deleted from the peer list using list_del_rcu(), then the list_head is in an undefined state and it is not considered empty.

Signed-off-by: Ross Lagerwall ross.lagerwall@citrix.com Reviewed-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libfc/fc_rport.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 1e1c0f1b9e69..8ed2113f5a1e 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -184,7 +184,6 @@ void fc_rport_destroy(struct kref *kref) struct fc_rport_priv *rdata;

rdata = container_of(kref, struct fc_rport_priv, kref); - WARN_ON(!list_empty(&rdata->peers)); kfree_rcu(rdata, rcu); } EXPORT_SYMBOL(fc_rport_destroy);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0a5f49cbf9d6ad3721c16f8a6d823363ea7a160f ]

amdgpu_vm_get_task_info is called from interrupt handler and sched timeout workqueue, we should use irq version spin_lock to avoid deadlock.

Signed-off-by: Philip Yang Philip.Yang@amd.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 62df4bd0a0fc..16c83155ef5c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -3405,14 +3405,15 @@ void amdgpu_vm_get_task_info(struct amdgpu_device *adev, unsigned int pasid, struct amdgpu_task_info *task_info) { struct amdgpu_vm *vm; + unsigned long flags;

- spin_lock(&adev->vm_manager.pasid_lock); + spin_lock_irqsave(&adev->vm_manager.pasid_lock, flags);

vm = idr_find(&adev->vm_manager.pasid_idr, pasid); if (vm) *task_info = vm->task_info;

- spin_unlock(&adev->vm_manager.pasid_lock); + spin_unlock_irqrestore(&adev->vm_manager.pasid_lock, flags); }

/**

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0940c52742de0d2f70ba687bfd5fe8aa38c5f27d ]

Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") moved the of_platform_populate() call from dsi_bind() to dsi_probe(), but failed to move the corresponding of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results in OF child devices being potentially removed multiple times. Fix it by placing the of_platform_depopulate() call where it belongs.

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/omapdrm/dss/dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index 277f9dd2ec8c..b5685018d830 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -5104,8 +5104,6 @@ static void dsi_unbind(struct device *dev, struct device *master, void *data) dss_debugfs_remove_file(dsi->debugfs.irqs); dss_debugfs_remove_file(dsi->debugfs.regs);

- of_platform_depopulate(dev); - WARN_ON(dsi->scp_clk_refcount > 0);

dss_pll_unregister(&dsi->pll); @@ -5457,6 +5455,8 @@ static int dsi_remove(struct platform_device *pdev)

dsi_uninit_output(dsi);

+ of_platform_depopulate(&pdev->dev); + pm_runtime_disable(&pdev->dev);

if (dsi->vdds_dsi_reg != NULL && dsi->vdds_dsi_enabled) {

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e7ad43c3eda6a1690c4c3c341f95dc1c6898da83 ]

If a controller supports the NS Change Notification, the namespace scan_work is automatically triggered after attaching a new namespace.

Occasionally the namespace scan_work may append the new namespace to the list before the admin command effects handling is completed. The effects handling unfreezes namespaces, but if it unfreezes the newly attached namespace, its request_queue freeze depth will be off and we'll hit the warning in blk_mq_unfreeze_queue().

On the next namespace add, we will fail to freeze that queue due to the previous bad accounting and deadlock waiting for frozen.

Fix that by preventing scan work from altering the namespace list while command effects handling needs to pair freeze with unfreeze.

Reported-by: Wen Xiong wenxiong@us.ibm.com Tested-by: Wen Xiong wenxiong@us.ibm.com Signed-off-by: Keith Busch keith.busch@intel.com Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 8 +++++++- drivers/nvme/host/nvme.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 5f9a5ef93969..21d7b646c73d 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1182,6 +1182,7 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns, * effects say only one namespace is affected. */ if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) { + mutex_lock(&ctrl->scan_lock); nvme_start_freeze(ctrl); nvme_wait_freeze(ctrl); } @@ -1210,8 +1211,10 @@ static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects) */ if (effects & NVME_CMD_EFFECTS_LBCC) nvme_update_formats(ctrl); - if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) + if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) { nvme_unfreeze(ctrl); + mutex_unlock(&ctrl->scan_lock); + } if (effects & NVME_CMD_EFFECTS_CCC) nvme_init_identify(ctrl); if (effects & (NVME_CMD_EFFECTS_NIC | NVME_CMD_EFFECTS_NCC)) @@ -3300,6 +3303,7 @@ static void nvme_scan_work(struct work_struct *work) if (nvme_identify_ctrl(ctrl, &id)) return;

+ mutex_lock(&ctrl->scan_lock); nn = le32_to_cpu(id->nn); if (ctrl->vs >= NVME_VS(1, 1, 0) && !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) { @@ -3308,6 +3312,7 @@ static void nvme_scan_work(struct work_struct *work) } nvme_scan_ns_sequential(ctrl, nn); out_free_id: + mutex_unlock(&ctrl->scan_lock); kfree(id); down_write(&ctrl->namespaces_rwsem); list_sort(NULL, &ctrl->namespaces, ns_cmp); @@ -3550,6 +3555,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,

ctrl->state = NVME_CTRL_NEW; spin_lock_init(&ctrl->lock); + mutex_init(&ctrl->scan_lock); INIT_LIST_HEAD(&ctrl->namespaces); init_rwsem(&ctrl->namespaces_rwsem); ctrl->dev = dev; diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 6ffa99a10a60..5274881f9141 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -153,6 +153,7 @@ struct nvme_ctrl { enum nvme_ctrl_state state; bool identified; spinlock_t lock; + struct mutex scan_lock; const struct nvme_ctrl_ops *ops; struct request_queue *admin_q; struct request_queue *connect_q;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls printk() for 100+ times per a second. But there is no need to print same message with such high frequency; it is just asking for stall warning, or at least bloating log files.

[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.873324][T15342] b_state=0x00000029, b_size=512 [ 399.878403][T15342] device loop0 blocksize: 4096 [ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.890400][T15342] b_state=0x00000029, b_size=512 [ 399.895595][T15342] device loop0 blocksize: 4096 [ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.907471][T15342] b_state=0x00000029, b_size=512 [ 399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to concatenating three lines into one.

[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Reviewed-by: Jan Kara jack@suse.cz Cc: Dmitry Vyukov dvyukov@google.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/buffer.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c index 1286c2b95498..72e33ffa00ff 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -200,6 +200,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) struct buffer_head *head; struct page *page; int all_mapped = 1; + static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);

index = block >> (PAGE_SHIFT - bd_inode->i_blkbits); page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED); @@ -227,15 +228,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) * file io on the block device and getblk. It gets dealt with * elsewhere, don't buffer_error if we had some unmapped buffers */ - if (all_mapped) { - printk("__find_get_block_slow() failed. " - "block=%llu, b_blocknr=%llu\n", - (unsigned long long)block, - (unsigned long long)bh->b_blocknr); - printk("b_state=0x%08lx, b_size=%zu\n", - bh->b_state, bh->b_size); - printk("device %pg blocksize: %d\n", bdev, - 1 << bd_inode->i_blkbits); + ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE); + if (all_mapped && __ratelimit(&last_warned)) { + printk("__find_get_block_slow() failed. block=%llu, " + "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, " + "device %pg blocksize: %d\n", + (unsigned long long)block, + (unsigned long long)bh->b_blocknr, + bh->b_state, bh->b_size, bdev, + 1 << bd_inode->i_blkbits); } out_unlock: spin_unlock(&bd_mapping->private_lock);

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru skalluru@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index e68ca83ae915..64ac95ca4df2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -2216,7 +2216,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 num_queues = 0;

/* Since the feature controls only queue-zones, - * make sure we have the contexts [rx, tx, xdp] to + * make sure we have the contexts [rx, xdp, tcs] to * match. */ for_each_hwfn(cdev, i) { @@ -2226,7 +2226,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 cids;

cids = hwfn->pf_params.eth_pf_params.num_cons; - num_queues += min_t(u16, l2_queues, cids / 3); + cids /= (2 + info->num_tc); + num_queues += min_t(u16, l2_queues, cids); }

/* queues might theoretically be >256, but interrupts'

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8c772a9bfc7c07c76f4a58b58910452fbb20843b ]

Our test reported the following stack, and vmcore showed that ->inflight counter is -1.

[ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e

The ->inflight counter may be negative (-1) if

1) blk-iolatency was disabled when the IO was issued,

2) blk-iolatency was enabled before this IO reached its endio,

3) the ->inflight counter is decreased from 0 to -1 in endio()

In fact the hang can be easily reproduced by the below script,

H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test

echo "+io" > $H/cgroup.subtree_control mkdir -p $P

echo $$ > $P/cgroup.procs

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running.

Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care.

Signed-off-by: Liu Bo bo.liu@linux.alibaba.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-iolatency.c | 52 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 45 insertions(+), 7 deletions(-)

diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c index 38c35c32aff2..c1c72b42dda0 100644 --- a/block/blk-iolatency.c +++ b/block/blk-iolatency.c @@ -72,6 +72,7 @@ #include <linux/sched/loadavg.h> #include <linux/sched/signal.h> #include <trace/events/block.h> +#include <linux/blk-mq.h> #include "blk-rq-qos.h" #include "blk-stat.h"

@@ -648,6 +649,9 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio) return;

enabled = blk_iolatency_enabled(iolat->blkiolat); + if (!enabled) + return; + while (blkg && blkg->parent) { iolat = blkg_to_lat(blkg); if (!iolat) { @@ -657,7 +661,7 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio) rqw = &iolat->rq_wait;

atomic_dec(&rqw->inflight); - if (!enabled || iolat->min_lat_nsec == 0) + if (iolat->min_lat_nsec == 0) goto next; iolatency_record_time(iolat, &bio->bi_issue, now, issue_as_root); @@ -801,10 +805,13 @@ int blk_iolatency_init(struct request_queue *q) return 0; }

-static void iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val) +/* + * return 1 for enabling iolatency, return -1 for disabling iolatency, otherwise + * return 0. + */ +static int iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val) { struct iolatency_grp *iolat = blkg_to_lat(blkg); - struct blk_iolatency *blkiolat = iolat->blkiolat; u64 oldval = iolat->min_lat_nsec;

iolat->min_lat_nsec = val; @@ -813,9 +820,10 @@ static void iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val) BLKIOLATENCY_MAX_WIN_SIZE);

if (!oldval && val) - atomic_inc(&blkiolat->enabled); + return 1; if (oldval && !val) - atomic_dec(&blkiolat->enabled); + return -1; + return 0; }

static void iolatency_clear_scaling(struct blkcg_gq *blkg) @@ -847,6 +855,7 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf, u64 lat_val = 0; u64 oldval; int ret; + int enable = 0;

ret = blkg_conf_prep(blkcg, &blkcg_policy_iolatency, buf, &ctx); if (ret) @@ -881,7 +890,12 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf, blkg = ctx.blkg; oldval = iolat->min_lat_nsec;

- iolatency_set_min_lat_nsec(blkg, lat_val); + enable = iolatency_set_min_lat_nsec(blkg, lat_val); + if (enable) { + WARN_ON_ONCE(!blk_get_queue(blkg->q)); + blkg_get(blkg); + } + if (oldval != iolat->min_lat_nsec) { iolatency_clear_scaling(blkg); } @@ -889,6 +903,24 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf, ret = 0; out: blkg_conf_finish(&ctx); + if (ret == 0 && enable) { + struct iolatency_grp *tmp = blkg_to_lat(blkg); + struct blk_iolatency *blkiolat = tmp->blkiolat; + + blk_mq_freeze_queue(blkg->q); + + if (enable == 1) + atomic_inc(&blkiolat->enabled); + else if (enable == -1) + atomic_dec(&blkiolat->enabled); + else + WARN_ON_ONCE(1); + + blk_mq_unfreeze_queue(blkg->q); + + blkg_put(blkg); + blk_put_queue(blkg->q); + } return ret ?: nbytes; }

@@ -1024,8 +1056,14 @@ static void iolatency_pd_offline(struct blkg_policy_data *pd) { struct iolatency_grp *iolat = pd_to_lat(pd); struct blkcg_gq *blkg = lat_to_blkg(iolat); + struct blk_iolatency *blkiolat = iolat->blkiolat; + int ret;

- iolatency_set_min_lat_nsec(blkg, 0); + ret = iolatency_set_min_lat_nsec(blkg, 0); + if (ret == 1) + atomic_inc(&blkiolat->enabled); + if (ret == -1) + atomic_dec(&blkiolat->enabled); iolatency_clear_scaling(blkg); }

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f6ac8585897684374a19863fff21186a05805286 ]

Anonymous sets that are bound to rules from the same transaction trigger a kernel splat from the abort path due to double set list removal and double free.

This patch updates the logic to search for the transaction that is responsible for creating the set and disable the set list removal and release, given the rule is now responsible for this. Lookup is reverse since the transaction that adds the set is likely to be at the tail of the list.

Moreover, this patch adds the unbind step to deliver the event from the commit path. This should not be done from the worker thread, since we have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate callbacks need to be provided.

Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: Mikhail Morfikov mmorfikov@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_tables.h | 17 +++++-- net/netfilter/nf_tables_api.c | 85 +++++++++++++++---------------- net/netfilter/nft_compat.c | 6 ++- net/netfilter/nft_dynset.c | 18 +++---- net/netfilter/nft_immediate.c | 6 ++- net/netfilter/nft_lookup.c | 18 +++---- net/netfilter/nft_objref.c | 18 +++---- 7 files changed, 85 insertions(+), 83 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 841835a387e1..b4984bbbe157 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -469,9 +469,7 @@ struct nft_set_binding { int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set, struct nft_set_binding *binding); void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set, - struct nft_set_binding *binding); -void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set, - struct nft_set_binding *binding); + struct nft_set_binding *binding, bool commit); void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set);

/** @@ -721,6 +719,13 @@ struct nft_expr_type { #define NFT_EXPR_STATEFUL 0x1 #define NFT_EXPR_GC 0x2

+enum nft_trans_phase { + NFT_TRANS_PREPARE, + NFT_TRANS_ABORT, + NFT_TRANS_COMMIT, + NFT_TRANS_RELEASE +}; + /** * struct nft_expr_ops - nf_tables expression operations * @@ -750,7 +755,8 @@ struct nft_expr_ops { void (*activate)(const struct nft_ctx *ctx, const struct nft_expr *expr); void (*deactivate)(const struct nft_ctx *ctx, - const struct nft_expr *expr); + const struct nft_expr *expr, + enum nft_trans_phase phase); void (*destroy)(const struct nft_ctx *ctx, const struct nft_expr *expr); void (*destroy_clone)(const struct nft_ctx *ctx, @@ -1323,12 +1329,15 @@ struct nft_trans_rule { struct nft_trans_set { struct nft_set *set; u32 set_id; + bool bound; };

#define nft_trans_set(trans) \ (((struct nft_trans_set *)trans->data)->set) #define nft_trans_set_id(trans) \ (((struct nft_trans_set *)trans->data)->set_id) +#define nft_trans_set_bound(trans) \ + (((struct nft_trans_set *)trans->data)->bound)

struct nft_trans_chain { bool update; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 5114a0d2a41e..36d4717fee3b 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -116,6 +116,23 @@ static void nft_trans_destroy(struct nft_trans *trans) kfree(trans); }

+static void nft_set_trans_bind(const struct nft_ctx *ctx, struct nft_set *set) +{ + struct net *net = ctx->net; + struct nft_trans *trans; + + if (!nft_set_is_anonymous(set)) + return; + + list_for_each_entry_reverse(trans, &net->nft.commit_list, list) { + if (trans->msg_type == NFT_MSG_NEWSET && + nft_trans_set(trans) == set) { + nft_trans_set_bound(trans) = true; + break; + } + } +} + static int nf_tables_register_hook(struct net *net, const struct nft_table *table, struct nft_chain *chain) @@ -211,18 +228,6 @@ static int nft_delchain(struct nft_ctx *ctx) return err; }

-/* either expr ops provide both activate/deactivate, or neither */ -static bool nft_expr_check_ops(const struct nft_expr_ops *ops) -{ - if (!ops) - return true; - - if (WARN_ON_ONCE((!ops->activate ^ !ops->deactivate))) - return false; - - return true; -} - static void nft_rule_expr_activate(const struct nft_ctx *ctx, struct nft_rule *rule) { @@ -238,14 +243,15 @@ static void nft_rule_expr_activate(const struct nft_ctx *ctx, }

static void nft_rule_expr_deactivate(const struct nft_ctx *ctx, - struct nft_rule *rule) + struct nft_rule *rule, + enum nft_trans_phase phase) { struct nft_expr *expr;

expr = nft_expr_first(rule); while (expr != nft_expr_last(rule) && expr->ops) { if (expr->ops->deactivate) - expr->ops->deactivate(ctx, expr); + expr->ops->deactivate(ctx, expr, phase);

expr = nft_expr_next(expr); } @@ -296,7 +302,7 @@ static int nft_delrule(struct nft_ctx *ctx, struct nft_rule *rule) nft_trans_destroy(trans); return err; } - nft_rule_expr_deactivate(ctx, rule); + nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_PREPARE);

return 0; } @@ -1932,9 +1938,6 @@ static int nf_tables_delchain(struct net *net, struct sock *nlsk, */ int nft_register_expr(struct nft_expr_type *type) { - if (!nft_expr_check_ops(type->ops)) - return -EINVAL; - nfnl_lock(NFNL_SUBSYS_NFTABLES); if (type->family == NFPROTO_UNSPEC) list_add_tail_rcu(&type->list, &nf_tables_expressions); @@ -2082,10 +2085,6 @@ static int nf_tables_expr_parse(const struct nft_ctx *ctx, err = PTR_ERR(ops); goto err1; } - if (!nft_expr_check_ops(ops)) { - err = -EINVAL; - goto err1; - } } else ops = type->ops;

@@ -2482,7 +2481,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx, static void nf_tables_rule_release(const struct nft_ctx *ctx, struct nft_rule *rule) { - nft_rule_expr_deactivate(ctx, rule); + nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_RELEASE); nf_tables_rule_destroy(ctx, rule); }

@@ -3679,39 +3678,30 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set, bind: binding->chain = ctx->chain; list_add_tail_rcu(&binding->list, &set->bindings); + nft_set_trans_bind(ctx, set); + return 0; } EXPORT_SYMBOL_GPL(nf_tables_bind_set);

-void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set, - struct nft_set_binding *binding) -{ - if (list_empty(&set->bindings) && nft_set_is_anonymous(set) && - nft_is_active(ctx->net, set)) - list_add_tail_rcu(&set->list, &ctx->table->sets); - - list_add_tail_rcu(&binding->list, &set->bindings); -} -EXPORT_SYMBOL_GPL(nf_tables_rebind_set); - void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set, - struct nft_set_binding *binding) + struct nft_set_binding *binding, bool event) { list_del_rcu(&binding->list);

- if (list_empty(&set->bindings) && nft_set_is_anonymous(set) && - nft_is_active(ctx->net, set)) + if (list_empty(&set->bindings) && nft_set_is_anonymous(set)) { list_del_rcu(&set->list); + if (event) + nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, + GFP_KERNEL); + } } EXPORT_SYMBOL_GPL(nf_tables_unbind_set);

void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set) { - if (list_empty(&set->bindings) && nft_set_is_anonymous(set) && - nft_is_active(ctx->net, set)) { - nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, GFP_ATOMIC); + if (list_empty(&set->bindings) && nft_set_is_anonymous(set)) nft_set_destroy(set); - } } EXPORT_SYMBOL_GPL(nf_tables_destroy_set);

@@ -6504,6 +6494,9 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nf_tables_rule_notify(&trans->ctx, nft_trans_rule(trans), NFT_MSG_DELRULE); + nft_rule_expr_deactivate(&trans->ctx, + nft_trans_rule(trans), + NFT_TRANS_COMMIT); break; case NFT_MSG_NEWSET: nft_clear(net, nft_trans_set(trans)); @@ -6590,7 +6583,8 @@ static void nf_tables_abort_release(struct nft_trans *trans) nf_tables_rule_destroy(&trans->ctx, nft_trans_rule(trans)); break; case NFT_MSG_NEWSET: - nft_set_destroy(nft_trans_set(trans)); + if (!nft_trans_set_bound(trans)) + nft_set_destroy(nft_trans_set(trans)); break; case NFT_MSG_NEWSETELEM: nft_set_elem_destroy(nft_trans_elem_set(trans), @@ -6651,7 +6645,9 @@ static int __nf_tables_abort(struct net *net) case NFT_MSG_NEWRULE: trans->ctx.chain->use--; list_del_rcu(&nft_trans_rule(trans)->list); - nft_rule_expr_deactivate(&trans->ctx, nft_trans_rule(trans)); + nft_rule_expr_deactivate(&trans->ctx, + nft_trans_rule(trans), + NFT_TRANS_ABORT); break; case NFT_MSG_DELRULE: trans->ctx.chain->use++; @@ -6661,7 +6657,8 @@ static int __nf_tables_abort(struct net *net) break; case NFT_MSG_NEWSET: trans->ctx.table->use--; - list_del_rcu(&nft_trans_set(trans)->list); + if (!nft_trans_set_bound(trans)) + list_del_rcu(&nft_trans_set(trans)->list); break; case NFT_MSG_DELSET: trans->ctx.table->use++; diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index a354e9771697..5fd94f7fdb94 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -588,10 +588,14 @@ static void nft_compat_activate_tg(const struct nft_ctx *ctx, }

static void nft_compat_deactivate(const struct nft_ctx *ctx, - const struct nft_expr *expr) + const struct nft_expr *expr, + enum nft_trans_phase phase) { struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);

+ if (phase == NFT_TRANS_COMMIT) + return; + if (--xt->listcnt == 0) list_del_init(&xt->head); } diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index 07d4efd3d851..f1172f99752b 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -235,20 +235,17 @@ static int nft_dynset_init(const struct nft_ctx *ctx, return err; }

-static void nft_dynset_activate(const struct nft_ctx *ctx, - const struct nft_expr *expr) -{ - struct nft_dynset *priv = nft_expr_priv(expr); - - nf_tables_rebind_set(ctx, priv->set, &priv->binding); -} - static void nft_dynset_deactivate(const struct nft_ctx *ctx, - const struct nft_expr *expr) + const struct nft_expr *expr, + enum nft_trans_phase phase) { struct nft_dynset *priv = nft_expr_priv(expr);

- nf_tables_unbind_set(ctx, priv->set, &priv->binding); + if (phase == NFT_TRANS_PREPARE) + return; + + nf_tables_unbind_set(ctx, priv->set, &priv->binding, + phase == NFT_TRANS_COMMIT); }

static void nft_dynset_destroy(const struct nft_ctx *ctx, @@ -296,7 +293,6 @@ static const struct nft_expr_ops nft_dynset_ops = { .eval = nft_dynset_eval, .init = nft_dynset_init, .destroy = nft_dynset_destroy, - .activate = nft_dynset_activate, .deactivate = nft_dynset_deactivate, .dump = nft_dynset_dump, }; diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c index 0777a93211e2..3f6d1d2a6281 100644 --- a/net/netfilter/nft_immediate.c +++ b/net/netfilter/nft_immediate.c @@ -72,10 +72,14 @@ static void nft_immediate_activate(const struct nft_ctx *ctx, }

static void nft_immediate_deactivate(const struct nft_ctx *ctx, - const struct nft_expr *expr) + const struct nft_expr *expr, + enum nft_trans_phase phase) { const struct nft_immediate_expr *priv = nft_expr_priv(expr);

+ if (phase == NFT_TRANS_COMMIT) + return; + return nft_data_release(&priv->data, nft_dreg_to_type(priv->dreg)); }

diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c index 227b2b15a19c..14496da5141d 100644 --- a/net/netfilter/nft_lookup.c +++ b/net/netfilter/nft_lookup.c @@ -121,20 +121,17 @@ static int nft_lookup_init(const struct nft_ctx *ctx, return 0; }

-static void nft_lookup_activate(const struct nft_ctx *ctx, - const struct nft_expr *expr) -{ - struct nft_lookup *priv = nft_expr_priv(expr); - - nf_tables_rebind_set(ctx, priv->set, &priv->binding); -} - static void nft_lookup_deactivate(const struct nft_ctx *ctx, - const struct nft_expr *expr) + const struct nft_expr *expr, + enum nft_trans_phase phase) { struct nft_lookup *priv = nft_expr_priv(expr);

- nf_tables_unbind_set(ctx, priv->set, &priv->binding); + if (phase == NFT_TRANS_PREPARE) + return; + + nf_tables_unbind_set(ctx, priv->set, &priv->binding, + phase == NFT_TRANS_COMMIT); }

static void nft_lookup_destroy(const struct nft_ctx *ctx, @@ -225,7 +222,6 @@ static const struct nft_expr_ops nft_lookup_ops = { .size = NFT_EXPR_SIZE(sizeof(struct nft_lookup)), .eval = nft_lookup_eval, .init = nft_lookup_init, - .activate = nft_lookup_activate, .deactivate = nft_lookup_deactivate, .destroy = nft_lookup_destroy, .dump = nft_lookup_dump, diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c index a3185ca2a3a9..ae178e914486 100644 --- a/net/netfilter/nft_objref.c +++ b/net/netfilter/nft_objref.c @@ -155,20 +155,17 @@ static int nft_objref_map_dump(struct sk_buff *skb, const struct nft_expr *expr) return -1; }

-static void nft_objref_map_activate(const struct nft_ctx *ctx, - const struct nft_expr *expr) -{ - struct nft_objref_map *priv = nft_expr_priv(expr); - - nf_tables_rebind_set(ctx, priv->set, &priv->binding); -} - static void nft_objref_map_deactivate(const struct nft_ctx *ctx, - const struct nft_expr *expr) + const struct nft_expr *expr, + enum nft_trans_phase phase) { struct nft_objref_map *priv = nft_expr_priv(expr);

- nf_tables_unbind_set(ctx, priv->set, &priv->binding); + if (phase == NFT_TRANS_PREPARE) + return; + + nf_tables_unbind_set(ctx, priv->set, &priv->binding, + phase == NFT_TRANS_COMMIT); }

static void nft_objref_map_destroy(const struct nft_ctx *ctx, @@ -185,7 +182,6 @@ static const struct nft_expr_ops nft_objref_map_ops = { .size = NFT_EXPR_SIZE(sizeof(struct nft_objref_map)), .eval = nft_objref_map_eval, .init = nft_objref_map_init, - .activate = nft_objref_map_activate, .deactivate = nft_objref_map_deactivate, .destroy = nft_objref_map_destroy, .dump = nft_objref_map_dump,

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jason Gerecke jason.gerecke@wacom.com

commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.

Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device:

$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0

https://github.com/linuxwacom/xf86-input-wacom/issues/40

Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/tablet/wacom_serial4.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/input/tablet/wacom_serial4.c +++ b/drivers/input/tablet/wacom_serial4.c @@ -187,6 +187,7 @@ enum { MODEL_DIGITIZER_II = 0x5544, /* UD */ MODEL_GRAPHIRE = 0x4554, /* ET */ MODEL_PENPARTNER = 0x4354, /* CT */ + MODEL_ARTPAD_II = 0x4B54, /* KT */ };

static void wacom_handle_model_response(struct wacom *wacom) @@ -245,6 +246,7 @@ static void wacom_handle_model_response( wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; break;

+ case MODEL_ARTPAD_II: case MODEL_DIGITIZER_II: wacom->dev->name = "Wacom Digitizer II"; wacom->dev->id.version = MODEL_DIGITIZER_II;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva gustavo@embeddedor.com

commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva gustavo@embeddedor.com Signed-off-by: Konrad Rzeszutek Wilk konrad.wilk@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/firmware/iscsi_ibft.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -542,6 +542,7 @@ static umode_t __init ibft_check_tgt_for case ISCSI_BOOT_TGT_NIC_ASSOC: case ISCSI_BOOT_TGT_CHAP_TYPE: rc = S_IRUGO; + break; case ISCSI_BOOT_TGT_NAME: if (tgt->tgt_name_len) rc = S_IRUGO;

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Shishkin alexander.shishkin@linux.intel.com

commit 2e095ce7b6ecce2f3e2ff330527f12056ed1e1a1 upstream.

On Denverton's integration of the Intel(R) Trace Hub (for a reference and overview see Documentation/trace/intel_th.rst) the reported size of one of its resources (RTIT_BAR) doesn't match its actual size, which leads to overlaps with other devices' resources.

In practice, it overlaps with XHCI MMIO space, which results in the xhci driver bailing out after seeing its registers as 0xffffffff, and perceived disappearance of all USB devices:

intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006) xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead xhci_hcd 0000:00:15.0: HC died; cleaning up usb 1-1: USB disconnect, device number 2

For this reason, we need to resize the RTIT_BAR on Denverton to its actual size, which in this case is 4MB. The corresponding erratum is DNV36 at the link below:

DNV36. Processor Host Root Complex May Incorrectly Route Memory Accesses to Intel® Trace Hub

Problem: The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is reported as a 2KB memory range. Due to this erratum, the processor Host Root Complex will forward addresses from RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub.

Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1 space may not function correctly.

Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum.

Status: No Fix.

Note that 5118ccd34780 ("intel_th: pci: Add Denverton SOC support") updates the Trace Hub driver so it claims the Denverton device, but the resource overlap exists regardless of whether that driver is loaded or that commit is included.

Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-u... Signed-off-by: Alexander Shishkin alexander.shishkin@linux.intel.com [bhelgaas: include erratum text, clarify relationship with 5118ccd34780] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/pci/fixup.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)

--- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -635,6 +635,22 @@ static void quirk_no_aersid(struct pci_d DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aersid);

+static void quirk_intel_th_dnv(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[4]; + + /* + * Denverton reports 2k of RTIT_BAR (intel_th resource 4), which + * appears to be 4 MB in reality. + */ + if (r->end == r->start + 0x7ff) { + r->start = 0; + r->end = 0x3fffff; + r->flags |= IORESOURCE_UNSET; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x19e1, quirk_intel_th_dnv); + #ifdef CONFIG_PHYS_ADDR_T_64BIT

#define AMD_141b_MMIO_BASE(x) (0x80 + (x) * 0x8)

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kiszka jan.kiszka@siemens.com

commit 83b944174ad79825ae84a47af1a0354485b24602 upstream.

Somewhere along recent changes to power control of the wl1835, power-on became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, the hikey would already be happy with 1 ms. Still, we use the safer 10 ms, like on the Ultra96.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Cc: stable@vger.kernel.org #4.12+ Signed-off-by: Jan Kiszka jan.kiszka@siemens.com Acked-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Wei Xu xuwei5@hisilicon.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -118,6 +118,7 @@ reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; clocks = <&pmic>; clock-names = "ext_clock"; + post-power-on-delay-ms = <10>; power-off-delay-us = <10>; };

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski m.szyprowski@samsung.com

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to proper platform device").

It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration.

Cc: stable@vger.kernel.org Reported-by: Markus Reichl m.reichl@fivetechno.de Suggested-by: Ulf Hansson ulf.hansson@linaro.org Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -49,7 +49,7 @@ };

emmc_pwrseq: pwrseq { - pinctrl-0 = <&sd1_cd>; + pinctrl-0 = <&emmc_rstn>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; @@ -161,12 +161,6 @@ cpu0-supply = <&buck2_reg>; };

-/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; -}; - &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; @@ -184,6 +178,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; + + emmc_rstn: emmc-rstn { + samsung,pins = "gpk1-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; };

&ehci {

4.20-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski m.szyprowski@samsung.com

commit a3238924a820c1d7c977b632b769f3b5690cba09 upstream.

The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is set too low. Increase it to the 2000mV as specified on the board schematic. So far the board worked fine, because of the bug in the PMIC driver, which used incorrect step value for that regulator. It interpreted the voltage value set by the bootloader as 1225mV and kept it unchanged. The regulator driver has been however fixed recently in the commit 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results in reading the proper buck8 value and forcing it to 1500mV on boot. This is not enough for proper board operation and results in eMMC errors during heavy IO traffic. Increasing maximum voltage value for buck8 restores original driver behavior and fixes eMMC issues.

Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board") Fixes: 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -467,7 +467,7 @@ buck8_reg: BUCK8 { regulator-name = "vdd_1.8v_ldo"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; };