Hi,
Intel igc ethernet device does not work on 5.10.y due to a problem with the PHY check of igc driver.
``` igc: probe of 0000:03:00.0 failed with error -2 ```
To fix this issue, we'll need three commits that have been fixed in upstream.
Best regards, Nobuhiro
Sasha Neftin (3): igc: Remove _I_PHY_ID checking igc: Remove phy->type checking igc: Update I226_K device ID
drivers/net/ethernet/intel/igc/igc_base.c | 10 +--------- drivers/net/ethernet/intel/igc/igc_hw.h | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 18 +++++------------- drivers/net/ethernet/intel/igc/igc_phy.c | 6 ++---- 4 files changed, 9 insertions(+), 26 deletions(-)
From: Sasha Neftin sasha.neftin@intel.com
commit 7c496de538eebd8212dc2a3c9a468386b264d0d4 upstream.
i225 devices have only one PHY vendor. There is no point checking _I_PHY_ID during the link establishment and auto-negotiation process. This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin sasha.neftin@intel.com Tested-by: Dvora Fuxbrumer dvorax.fuxbrumer@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/net/ethernet/intel/igc/igc_base.c | 10 +--------- drivers/net/ethernet/intel/igc/igc_main.c | 3 +-- drivers/net/ethernet/intel/igc/igc_phy.c | 6 ++---- 3 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c index fd37d2c203af..7f3523f0d196 100644 --- a/drivers/net/ethernet/intel/igc/igc_base.c +++ b/drivers/net/ethernet/intel/igc/igc_base.c @@ -187,15 +187,7 @@ static s32 igc_init_phy_params_base(struct igc_hw *hw)
igc_check_for_copper_link(hw);
- /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case I225_I_PHY_ID: - phy->type = igc_phy_i225; - break; - default: - ret_val = -IGC_ERR_PHY; - goto out; - } + phy->type = igc_phy_i225;
out: return ret_val; diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 61cebb7df6bc..da39380ab205 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -4189,8 +4189,7 @@ bool igc_has_link(struct igc_adapter *adapter) break; }
- if (hw->mac.type == igc_i225 && - hw->phy.id == I225_I_PHY_ID) { + if (hw->mac.type == igc_i225) { if (!netif_carrier_ok(adapter->netdev)) { adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE; } else if (!(adapter->flags & IGC_FLAG_NEED_LINK_UPDATE)) { diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c index 8de4de2e5636..3a103406eadb 100644 --- a/drivers/net/ethernet/intel/igc/igc_phy.c +++ b/drivers/net/ethernet/intel/igc/igc_phy.c @@ -249,8 +249,7 @@ static s32 igc_phy_setup_autoneg(struct igc_hw *hw) return ret_val; }
- if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && - hw->phy.id == I225_I_PHY_ID) { + if (phy->autoneg_mask & ADVERTISE_2500_FULL) { /* Read the MULTI GBT AN Control Register - reg 7.32 */ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK << MMD_DEVADDR_SHIFT) | @@ -390,8 +389,7 @@ static s32 igc_phy_setup_autoneg(struct igc_hw *hw) ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && - hw->phy.id == I225_I_PHY_ID) + if (phy->autoneg_mask & ADVERTISE_2500_FULL) ret_val = phy->ops.write_reg(hw, (STANDARD_AN_REG_MASK << MMD_DEVADDR_SHIFT) |
From: Sasha Neftin sasha.neftin@intel.com
commit 47bca7de6a4fb8dcb564c7ca14d885c91ed19e03 upstream.
i225 devices have only one phy->type: copper. There is no point checking phy->type during the igc_has_link method from the watchdog that invoked every 2 seconds. This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin sasha.neftin@intel.com Tested-by: Dvora Fuxbrumer dvorax.fuxbrumer@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/net/ethernet/intel/igc/igc_main.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index da39380ab205..fd9257c7059a 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -4177,17 +4177,10 @@ bool igc_has_link(struct igc_adapter *adapter) * false until the igc_check_for_link establishes link * for copper adapters ONLY */ - switch (hw->phy.media_type) { - case igc_media_type_copper: - if (!hw->mac.get_link_status) - return true; - hw->mac.ops.check_for_link(hw); - link_active = !hw->mac.get_link_status; - break; - default: - case igc_media_type_unknown: - break; - } + if (!hw->mac.get_link_status) + return true; + hw->mac.ops.check_for_link(hw); + link_active = !hw->mac.get_link_status;
if (hw->mac.type == igc_i225) { if (!netif_carrier_ok(adapter->netdev)) {
From: Sasha Neftin sasha.neftin@intel.com
commit 79cc8322b6d82747cb63ea464146c0bf5b5a6bc1 upstream.
The device ID for I226_K was incorrectly assigned, update the device ID to the correct one.
Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin sasha.neftin@intel.com Tested-by: Nechama Kraus nechamax.kraus@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp --- drivers/net/ethernet/intel/igc/igc_hw.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h index 55dae7c4703f..7e29f41f70e0 100644 --- a/drivers/net/ethernet/intel/igc/igc_hw.h +++ b/drivers/net/ethernet/intel/igc/igc_hw.h @@ -22,6 +22,7 @@ #define IGC_DEV_ID_I220_V 0x15F7 #define IGC_DEV_ID_I225_K 0x3100 #define IGC_DEV_ID_I225_K2 0x3101 +#define IGC_DEV_ID_I226_K 0x3102 #define IGC_DEV_ID_I225_LMVP 0x5502 #define IGC_DEV_ID_I225_IT 0x0D9F #define IGC_DEV_ID_I226_LM 0x125B
linux-stable-mirror@lists.linaro.org
-
Nobuhiro Iwamatsu