Code expects array only with 2 items which should be checked. But also item checking is not working as it should likely because of incorrect items description.

Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema") Signed-off-by: Michal Simek michal.simek@amd.com Cc: stable@vger.kernel.org ---

Changes in v3: - Remove incorrectly assigned value for the first item 50/100 because of my testing

Changes in v2: - Remove maxItems properties which are not needed - Add stable ML to CC

.../devicetree/bindings/serial/rs485.yaml | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 9418fd66a8e9..b93254ad2a28 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -18,16 +18,15 @@ properties: description: prop-encoded-array <a b> $ref: /schemas/types.yaml#/definitions/uint32-array items: - items: - - description: Delay between rts signal and beginning of data sent in - milliseconds. It corresponds to the delay before sending data. - default: 0 - maximum: 100 - - description: Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release - of the line. - default: 0 - maximum: 100 + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 100 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 100

rs485-rts-active-high: description: drive RTS high when sending (this is the default).