From: "Chia-Lin Kao (AceLan)" acelan.kao@canonical.com

[ Upstream commit 363236d709e75610b628c2a4337ccbe42e454b6d ]

The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor.

[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff

Add this device to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace.

Signed-off-by: Chia-Lin Kao (AceLan) acelan.kao@canonical.com Acked-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d8c5e24e7d44c..29b8c96ce9f4d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1072,6 +1072,7 @@ #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 0x3001 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008 +#define USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473 0x5473

#define I2C_VENDOR_ID_RAYDIUM 0x2386 #define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index debc49272a5c0..875c44e5cf6c2 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -882,6 +882,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DPAD) }, #endif { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) }, + { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473) }, { } };

From: Alex Henrie alexhenrie24@gmail.com

[ Upstream commit 819083cb6eedcc8495cbf84845877bcc741b93b3 ]

The Omoton KB066 is an Apple A1255 keyboard clone (HID product code 05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn key is held. But unlike its Apple exemplar, when the Omoton's F6 key is pressed without Fn, it sends the usage code 0xC0301 from the reserved section of the consumer page instead of the standard F6 usage code 0x7003F from the keyboard page. The nonstandard code is translated to KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty popular keyboard, judging from its 29,058 reviews on Amazon at time of writing, so let's account for its quirk to make it more usable.

By the way, it would be nice if we could automatically set fnmode to 0 for Omoton keyboards because they handle the Fn key internally and the kernel's Fn key handling creates undesirable side effects such as making F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the default) or always F1 and F2 in fnmode=2. Unfortunately I don't think there's a way to identify Bluetooth keyboards more specifically than the HID product code which is obviously inaccurate. Users of Omoton keyboards will just have to set fnmode to 0 manually to get full Fn key functionality.

Signed-off-by: Alex Henrie alexhenrie24@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-apple.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index da8751601534f..86a5e09544c4a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -497,6 +497,9 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input, } }

+ if (usage->hid == 0xc0301) /* Omoton KB066 quirk */ + code = KEY_F6; + if (usage->code != code) { input_event_with_scancode(input, usage->type, code, usage->hid, value);

From: Sybil Isabel Dorsett sybdorsett@proton.me

[ Upstream commit 1046cac109225eda0973b898e053aeb3d6c10e1d ]

On ThinkPad X120e, fan speed is reported in ticks per revolution rather than RPM.

Recalculate the fan speed value reported for ThinkPad X120e to RPM based on a 22.5 kHz clock.

Based on the information on https://www.thinkwiki.org/wiki/How_to_control_fan_speed, the same problem is highly likely to be relevant to at least Edge11, but Edge11 is not addressed in this patch.

Signed-off-by: Sybil Isabel Dorsett sybdorsett@proton.me Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index bedc6cd51f399..0955624572316 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8161,6 +8161,7 @@ static struct ibm_struct volume_driver_data = {

#define FAN_NS_CTRL_STATUS BIT(2) /* Bit which determines control is enabled or not */ #define FAN_NS_CTRL BIT(4) /* Bit which determines control is by host or EC */ +#define FAN_CLOCK_TPM (22500*60) /* Ticks per minute for a 22.5 kHz clock */

enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ @@ -8214,6 +8215,7 @@ static int fan_watchdog_maxinterval;

static bool fan_with_ns_addr; static bool ecfw_with_fan_dec_rpm; +static bool fan_speed_in_tpr;

static struct mutex fan_mutex;

@@ -8396,8 +8398,11 @@ static int fan_get_speed(unsigned int *speed) !acpi_ec_read(fan_rpm_offset + 1, &hi))) return -EIO;

- if (likely(speed)) + if (likely(speed)) { *speed = (hi << 8) | lo; + if (fan_speed_in_tpr && *speed != 0) + *speed = FAN_CLOCK_TPM / *speed; + } break; case TPACPI_FAN_RD_TPEC_NS: if (!acpi_ec_read(fan_rpm_status_ns, &lo)) @@ -8430,8 +8435,11 @@ static int fan2_get_speed(unsigned int *speed) if (rc) return -EIO;

- if (likely(speed)) + if (likely(speed)) { *speed = (hi << 8) | lo; + if (fan_speed_in_tpr && *speed != 0) + *speed = FAN_CLOCK_TPM / *speed; + } break;

case TPACPI_FAN_RD_TPEC_NS: @@ -8959,6 +8967,7 @@ static const struct attribute_group fan_driver_attr_group = { #define TPACPI_FAN_NOFAN 0x0008 /* no fan available */ #define TPACPI_FAN_NS 0x0010 /* For EC with non-Standard register addresses */ #define TPACPI_FAN_DECRPM 0x0020 /* For ECFW's with RPM in register as decimal */ +#define TPACPI_FAN_TPR 0x0040 /* Fan speed is in Ticks Per Revolution */

static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), @@ -8981,6 +8990,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS), /* X13 Yoga Gen 2*/ TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */ + TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR), /* ThinkPad x120e */ };

static int __init fan_init(struct ibm_init_struct *iibm) @@ -9044,6 +9054,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)

if (quirks & TPACPI_FAN_Q1) fan_quirk1_setup(); + if (quirks & TPACPI_FAN_TPR) + fan_speed_in_tpr = true; /* Try and probe the 2nd fan */ tp_features.second_fan = 1; /* needed for get_speed to work */ res = fan2_get_speed(&speed);

From: Peter Oberparleiter oberpar@linux.ibm.com

[ Upstream commit 32ae4a2992529e2c7934e422035fad1d9b0f1fb5 ]

In some environments, the SCLP firmware interface used to query a CHPID's configured state is not supported. On these environments, rapidly reading the corresponding sysfs attribute produces inconsistent results:

$ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported $ cat /sys/devices/css0/chp0.00/configure 3

This occurs for example when Linux is run as a KVM guest. The inconsistency is a result of CIO using cached results for generating the value of the "configure" attribute while failing to handle the situation where no data was returned by SCLP.

Fix this by not updating the cache-expiration timestamp when SCLP returns no data. With the fix applied, the system response is consistent:

$ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported $ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported

Reviewed-by: Vineeth Vijayan vneethv@linux.ibm.com Reviewed-by: Eric Farman farman@linux.ibm.com Tested-by: Eric Farman farman@linux.ibm.com Signed-off-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/chp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 5440f285f3494..7e00c061538db 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -661,7 +661,8 @@ static int info_update(void) if (time_after(jiffies, chp_info_expires)) { /* Data is too old, update. */ rc = sclp_chp_read_info(&chp_info); - chp_info_expires = jiffies + CHP_INFO_UPDATE_INTERVAL ; + if (!rc) + chp_info_expires = jiffies + CHP_INFO_UPDATE_INTERVAL; } mutex_unlock(&info_lock);

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 5b166b782d327f4b66190cc43afd3be36f2b3b7a ]

This code can be called deep in the IRQ handling, for example, and then cannot normally use kmalloc(). Have its own pre-allocated memory and use from there instead so this doesn't occur. Only in the (very rare) case of memcpy_toio() we'd still need to allocate memory.

Link: https://patch.msgid.link/20250110125550.32479-6-johannes@sipsolutions.net Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- arch/um/drivers/virt-pci.c | 198 +++++++++++++++++++------------------ 1 file changed, 102 insertions(+), 96 deletions(-)

diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c index 5472b1a0a0398..c9a150029be2c 100644 --- a/arch/um/drivers/virt-pci.c +++ b/arch/um/drivers/virt-pci.c @@ -24,8 +24,10 @@ #define MAX_IRQ_MSG_SIZE (sizeof(struct virtio_pcidev_msg) + sizeof(u32)) #define NUM_IRQ_MSGS 10

-#define HANDLE_NO_FREE(ptr) ((void *)((unsigned long)(ptr) | 1)) -#define HANDLE_IS_NO_FREE(ptr) ((unsigned long)(ptr) & 1) +struct um_pci_message_buffer { + struct virtio_pcidev_msg hdr; + u8 data[8]; +};

struct um_pci_device { struct virtio_device *vdev; @@ -35,6 +37,11 @@ struct um_pci_device {

struct virtqueue *cmd_vq, *irq_vq;

+#define UM_PCI_WRITE_BUFS 20 + struct um_pci_message_buffer bufs[UM_PCI_WRITE_BUFS + 1]; + void *extra_ptrs[UM_PCI_WRITE_BUFS + 1]; + DECLARE_BITMAP(used_bufs, UM_PCI_WRITE_BUFS); + #define UM_PCI_STAT_WAITING 0 unsigned long status;

@@ -56,12 +63,40 @@ static unsigned long um_pci_msi_used[BITS_TO_LONGS(MAX_MSI_VECTORS)];

#define UM_VIRT_PCI_MAXDELAY 40000

-struct um_pci_message_buffer { - struct virtio_pcidev_msg hdr; - u8 data[8]; -}; +static int um_pci_get_buf(struct um_pci_device *dev, bool *posted) +{ + int i; + + for (i = 0; i < UM_PCI_WRITE_BUFS; i++) { + if (!test_and_set_bit(i, dev->used_bufs)) + return i; + }

-static struct um_pci_message_buffer __percpu *um_pci_msg_bufs; + *posted = false; + return UM_PCI_WRITE_BUFS; +} + +static void um_pci_free_buf(struct um_pci_device *dev, void *buf) +{ + int i; + + if (buf == &dev->bufs[UM_PCI_WRITE_BUFS]) { + kfree(dev->extra_ptrs[UM_PCI_WRITE_BUFS]); + dev->extra_ptrs[UM_PCI_WRITE_BUFS] = NULL; + return; + } + + for (i = 0; i < UM_PCI_WRITE_BUFS; i++) { + if (buf == &dev->bufs[i]) { + kfree(dev->extra_ptrs[i]); + dev->extra_ptrs[i] = NULL; + WARN_ON(!test_and_clear_bit(i, dev->used_bufs)); + return; + } + } + + WARN_ON(1); +}

static int um_pci_send_cmd(struct um_pci_device *dev, struct virtio_pcidev_msg *cmd, @@ -77,7 +112,9 @@ static int um_pci_send_cmd(struct um_pci_device *dev, }; struct um_pci_message_buffer *buf; int delay_count = 0; + bool bounce_out; int ret, len; + int buf_idx; bool posted;

if (WARN_ON(cmd_size < sizeof(*cmd) || cmd_size > sizeof(*buf))) @@ -96,26 +133,28 @@ static int um_pci_send_cmd(struct um_pci_device *dev, break; }

- buf = get_cpu_var(um_pci_msg_bufs); - if (buf) - memcpy(buf, cmd, cmd_size); + bounce_out = !posted && cmd_size <= sizeof(*cmd) && + out && out_size <= sizeof(buf->data);

- if (posted) { - u8 *ncmd = kmalloc(cmd_size + extra_size, GFP_ATOMIC); - - if (ncmd) { - memcpy(ncmd, cmd, cmd_size); - if (extra) - memcpy(ncmd + cmd_size, extra, extra_size); - cmd = (void *)ncmd; - cmd_size += extra_size; - extra = NULL; - extra_size = 0; - } else { - /* try without allocating memory */ - posted = false; - cmd = (void *)buf; + buf_idx = um_pci_get_buf(dev, &posted); + buf = &dev->bufs[buf_idx]; + memcpy(buf, cmd, cmd_size); + + if (posted && extra && extra_size > sizeof(buf) - cmd_size) { + dev->extra_ptrs[buf_idx] = kmemdup(extra, extra_size, + GFP_ATOMIC); + + if (!dev->extra_ptrs[buf_idx]) { + um_pci_free_buf(dev, buf); + return -ENOMEM; } + extra = dev->extra_ptrs[buf_idx]; + } else if (extra && extra_size <= sizeof(buf) - cmd_size) { + memcpy((u8 *)buf + cmd_size, extra, extra_size); + cmd_size += extra_size; + extra_size = 0; + extra = NULL; + cmd = (void *)buf; } else { cmd = (void *)buf; } @@ -123,39 +162,40 @@ static int um_pci_send_cmd(struct um_pci_device *dev, sg_init_one(&out_sg, cmd, cmd_size); if (extra) sg_init_one(&extra_sg, extra, extra_size); - if (out) + /* allow stack for small buffers */ + if (bounce_out) + sg_init_one(&in_sg, buf->data, out_size); + else if (out) sg_init_one(&in_sg, out, out_size);

/* add to internal virtio queue */ ret = virtqueue_add_sgs(dev->cmd_vq, sgs_list, extra ? 2 : 1, out ? 1 : 0, - posted ? cmd : HANDLE_NO_FREE(cmd), - GFP_ATOMIC); + cmd, GFP_ATOMIC); if (ret) { - if (posted) - kfree(cmd); - goto out; + um_pci_free_buf(dev, buf); + return ret; }

if (posted) { virtqueue_kick(dev->cmd_vq); - ret = 0; - goto out; + return 0; }

/* kick and poll for getting a response on the queue */ set_bit(UM_PCI_STAT_WAITING, &dev->status); virtqueue_kick(dev->cmd_vq); + ret = 0;

while (1) { void *completed = virtqueue_get_buf(dev->cmd_vq, &len);

- if (completed == HANDLE_NO_FREE(cmd)) + if (completed == buf) break;

- if (completed && !HANDLE_IS_NO_FREE(completed)) - kfree(completed); + if (completed) + um_pci_free_buf(dev, completed);

if (WARN_ONCE(virtqueue_is_broken(dev->cmd_vq) || ++delay_count > UM_VIRT_PCI_MAXDELAY, @@ -167,8 +207,11 @@ static int um_pci_send_cmd(struct um_pci_device *dev, } clear_bit(UM_PCI_STAT_WAITING, &dev->status);

-out: - put_cpu_var(um_pci_msg_bufs); + if (bounce_out) + memcpy(out, buf->data, out_size); + + um_pci_free_buf(dev, buf); + return ret; }

@@ -182,20 +225,13 @@ static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset, .size = size, .addr = offset, }; - /* buf->data is maximum size - we may only use parts of it */ - struct um_pci_message_buffer *buf; - u8 *data; - unsigned long ret = ULONG_MAX; - size_t bytes = sizeof(buf->data); + /* max 8, we might not use it all */ + u8 data[8];

if (!dev) return ULONG_MAX;

- buf = get_cpu_var(um_pci_msg_bufs); - data = buf->data; - - if (buf) - memset(data, 0xff, bytes); + memset(data, 0xff, sizeof(data));

switch (size) { case 1: @@ -207,34 +243,26 @@ static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset, break; default: WARN(1, "invalid config space read size %d\n", size); - goto out; + return ULONG_MAX; }

- if (um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0, data, bytes)) - goto out; + if (um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0, data, size)) + return ULONG_MAX;

switch (size) { case 1: - ret = data[0]; - break; + return data[0]; case 2: - ret = le16_to_cpup((void *)data); - break; + return le16_to_cpup((void *)data); case 4: - ret = le32_to_cpup((void *)data); - break; + return le32_to_cpup((void *)data); #ifdef CONFIG_64BIT case 8: - ret = le64_to_cpup((void *)data); - break; + return le64_to_cpup((void *)data); #endif default: - break; + return ULONG_MAX; } - -out: - put_cpu_var(um_pci_msg_bufs); - return ret; }

static void um_pci_cfgspace_write(void *priv, unsigned int offset, int size, @@ -307,13 +335,8 @@ static void um_pci_bar_copy_from(void *priv, void *buffer, static unsigned long um_pci_bar_read(void *priv, unsigned int offset, int size) { - /* buf->data is maximum size - we may only use parts of it */ - struct um_pci_message_buffer *buf; - u8 *data; - unsigned long ret = ULONG_MAX; - - buf = get_cpu_var(um_pci_msg_bufs); - data = buf->data; + /* 8 is maximum size - we may only use parts of it */ + u8 data[8];

switch (size) { case 1: @@ -325,33 +348,25 @@ static unsigned long um_pci_bar_read(void *priv, unsigned int offset, break; default: WARN(1, "invalid config space read size %d\n", size); - goto out; + return ULONG_MAX; }

um_pci_bar_copy_from(priv, data, offset, size);

switch (size) { case 1: - ret = data[0]; - break; + return data[0]; case 2: - ret = le16_to_cpup((void *)data); - break; + return le16_to_cpup((void *)data); case 4: - ret = le32_to_cpup((void *)data); - break; + return le32_to_cpup((void *)data); #ifdef CONFIG_64BIT case 8: - ret = le64_to_cpup((void *)data); - break; + return le64_to_cpup((void *)data); #endif default: - break; + return ULONG_MAX; } - -out: - put_cpu_var(um_pci_msg_bufs); - return ret; }

static void um_pci_bar_copy_to(void *priv, unsigned int offset, @@ -515,11 +530,8 @@ static void um_pci_cmd_vq_cb(struct virtqueue *vq) if (test_bit(UM_PCI_STAT_WAITING, &dev->status)) return;

- while ((cmd = virtqueue_get_buf(vq, &len))) { - if (WARN_ON(HANDLE_IS_NO_FREE(cmd))) - continue; - kfree(cmd); - } + while ((cmd = virtqueue_get_buf(vq, &len))) + um_pci_free_buf(dev, cmd); }

static void um_pci_irq_vq_cb(struct virtqueue *vq) @@ -887,10 +899,6 @@ static int __init um_pci_init(void) "No virtio device ID configured for PCI - no PCI support\n")) return 0;

- um_pci_msg_bufs = alloc_percpu(struct um_pci_message_buffer); - if (!um_pci_msg_bufs) - return -ENOMEM; - bridge = pci_alloc_host_bridge(0); if (!bridge) { err = -ENOMEM; @@ -952,7 +960,6 @@ static int __init um_pci_init(void) pci_free_resource_list(&bridge->windows); pci_free_host_bridge(bridge); } - free_percpu(um_pci_msg_bufs); return err; } module_init(um_pci_init); @@ -964,6 +971,5 @@ static void __exit um_pci_exit(void) irq_domain_remove(um_pci_inner_domain); pci_free_resource_list(&bridge->windows); pci_free_host_bridge(bridge); - free_percpu(um_pci_msg_bufs); } module_exit(um_pci_exit);

From: Jan Beulich jbeulich@suse.com

[ Upstream commit 75ad02318af2e4ae669e26a79f001bd5e1f97472 ]

It's sole user (pci_xen_swiotlb_init()) is __init, too.

Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Stefano Stabellini sstabellini@kernel.org

Message-ID: e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/swiotlb-xen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 0451e6ebc21a3..71ce0cd9e83de 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -110,7 +110,7 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr) }

#ifdef CONFIG_X86 -int xen_swiotlb_fixup(void *buf, unsigned long nslabs) +int __init xen_swiotlb_fixup(void *buf, unsigned long nslabs) { int rc; unsigned int order = get_order(IO_TLB_SEGSIZE << IO_TLB_SHIFT);