From: David Bauer mail@david-bauer.net

[ Upstream commit 19e2132174583beb90c1bd3e9c842bc6d5c944d1 ]

spi-bitbang has to call the chipselect function on the ath79 SPI driver in order to communicate with the SPI slave device, as the ath79 SPI driver has three dedicated chipselect lines but can also be used with GPIOs for the CS lines.

Fixes commit 4a07b8bcd503 ("spi: bitbang: Make chipselect callback optional")

Signed-off-by: David Bauer mail@david-bauer.net Link: https://lore.kernel.org/r/20210303160837.165771-1-mail@david-bauer.net Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-ath79.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index eb9a243e9526..436327fb58de 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -158,6 +158,7 @@ static int ath79_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); master->setup = spi_bitbang_setup; master->cleanup = spi_bitbang_cleanup; + master->flags = SPI_MASTER_GPIO_SS; if (pdata) { master->bus_num = pdata->bus_num; master->num_chipselect = pdata->num_chipselect;

From: Bhaumik Bhatt bbhatt@codeaurora.org

[ Upstream commit 925089c1900f588615db5bf4e1d9064a5f2c18c7 ]

Currently, client devices are created in SBL or AMSS (mission mode) and only destroyed after power down or SYS ERROR. When moving between certain execution environments, such as from SBL to AMSS, no clean-up is required. This presents an issue where SBL-specific channels are left open and client drivers now run in an execution environment where they cannot operate. Fix this by expanding the mhi_destroy_device() to do an execution environment specific clean-up if one is requested. Close the gap and destroy devices in such scenarios that allow SBL client drivers to clean up once device enters mission mode.

Signed-off-by: Bhaumik Bhatt bbhatt@codeaurora.org Reviewed-by: Loic Poulain loic.poulain@linaro.org Reviewed-by: Hemant Kumar hemantk@codeaurora.org Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Link: https://lore.kernel.org/r/1614208985-20851-2-git-send-email-bbhatt@codeauror... Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/mhi/core/main.c | 29 +++++++++++++++++++++++++---- drivers/bus/mhi/core/pm.c | 3 +++ 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index d34d7e90e38d..ac60f74043e8 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -224,8 +224,10 @@ static void mhi_del_ring_element(struct mhi_controller *mhi_cntrl,

int mhi_destroy_device(struct device *dev, void *data) { + struct mhi_chan *ul_chan, *dl_chan; struct mhi_device *mhi_dev; struct mhi_controller *mhi_cntrl; + enum mhi_ee_type ee = MHI_EE_MAX;

if (dev->bus != &mhi_bus_type) return 0; @@ -237,6 +239,17 @@ int mhi_destroy_device(struct device *dev, void *data) if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER) return 0;

+ ul_chan = mhi_dev->ul_chan; + dl_chan = mhi_dev->dl_chan; + + /* + * If execution environment is specified, remove only those devices that + * started in them based on ee_mask for the channels as we move on to a + * different execution environment + */ + if (data) + ee = *(enum mhi_ee_type *)data; + /* * For the suspend and resume case, this function will get called * without mhi_unregister_controller(). Hence, we need to drop the @@ -244,11 +257,19 @@ int mhi_destroy_device(struct device *dev, void *data) * be sure that there will be no instances of mhi_dev left after * this. */ - if (mhi_dev->ul_chan) - put_device(&mhi_dev->ul_chan->mhi_dev->dev); + if (ul_chan) { + if (ee != MHI_EE_MAX && !(ul_chan->ee_mask & BIT(ee))) + return 0;

- if (mhi_dev->dl_chan) - put_device(&mhi_dev->dl_chan->mhi_dev->dev); + put_device(&ul_chan->mhi_dev->dev); + } + + if (dl_chan) { + if (ee != MHI_EE_MAX && !(dl_chan->ee_mask & BIT(ee))) + return 0; + + put_device(&dl_chan->mhi_dev->dev); + }

dev_dbg(&mhi_cntrl->mhi_dev->dev, "destroy device for chan:%s\n", mhi_dev->name); diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index 681960c72d2a..3bd81d040380 100644 --- a/drivers/bus/mhi/core/pm.c +++ b/drivers/bus/mhi/core/pm.c @@ -377,6 +377,7 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl) { struct mhi_event *mhi_event; struct device *dev = &mhi_cntrl->mhi_dev->dev; + enum mhi_ee_type current_ee = mhi_cntrl->ee; int i, ret;

dev_dbg(dev, "Processing Mission Mode transition\n"); @@ -395,6 +396,8 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)

wake_up_all(&mhi_cntrl->state_event);

+ device_for_each_child(&mhi_cntrl->mhi_dev->dev, &current_ee, + mhi_destroy_device); mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_MISSION_MODE);

/* Force MHI to be in M0 state before continuing */

From: Ard Biesheuvel ardb@kernel.org

[ Upstream commit 83681f2bebb34dbb3f03fecd8f570308ab8b7c2c ]

Given that crypto_alloc_tfm() may return ERR pointers, and to avoid crashes on obscure error paths where such pointers are presented to crypto_destroy_tfm() (such as [0]), add an ERR_PTR check there before dereferencing the second argument as a struct crypto_tfm pointer.

[0] https://lore.kernel.org/linux-crypto/000000000000de949705bc59e0f6@google.com...

Reported-by: syzbot+12cf5fbfdeba210a89dd@syzkaller.appspotmail.com Reviewed-by: Eric Biggers ebiggers@google.com Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- crypto/api.c | 2 +- include/crypto/acompress.h | 2 ++ include/crypto/aead.h | 2 ++ include/crypto/akcipher.h | 2 ++ include/crypto/hash.h | 4 ++++ include/crypto/kpp.h | 2 ++ include/crypto/rng.h | 2 ++ include/crypto/skcipher.h | 2 ++ 8 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/crypto/api.c b/crypto/api.c index ed08cbd5b9d3..c4eda56cff89 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -562,7 +562,7 @@ void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm) { struct crypto_alg *alg;

- if (unlikely(!mem)) + if (IS_ERR_OR_NULL(mem)) return;

alg = tfm->__crt_alg; diff --git a/include/crypto/acompress.h b/include/crypto/acompress.h index fcde59c65a81..cb3d6b1c655d 100644 --- a/include/crypto/acompress.h +++ b/include/crypto/acompress.h @@ -165,6 +165,8 @@ static inline struct crypto_acomp *crypto_acomp_reqtfm(struct acomp_req *req) * crypto_free_acomp() -- free ACOMPRESS tfm handle * * @tfm: ACOMPRESS tfm handle allocated with crypto_alloc_acomp() + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_acomp(struct crypto_acomp *tfm) { diff --git a/include/crypto/aead.h b/include/crypto/aead.h index fcc12c593ef8..e728469c4ccc 100644 --- a/include/crypto/aead.h +++ b/include/crypto/aead.h @@ -185,6 +185,8 @@ static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm) /** * crypto_free_aead() - zeroize and free aead handle * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_aead(struct crypto_aead *tfm) { diff --git a/include/crypto/akcipher.h b/include/crypto/akcipher.h index 1d3aa252caba..5764b46bd1ec 100644 --- a/include/crypto/akcipher.h +++ b/include/crypto/akcipher.h @@ -174,6 +174,8 @@ static inline struct crypto_akcipher *crypto_akcipher_reqtfm( * crypto_free_akcipher() - free AKCIPHER tfm handle * * @tfm: AKCIPHER tfm handle allocated with crypto_alloc_akcipher() + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_akcipher(struct crypto_akcipher *tfm) { diff --git a/include/crypto/hash.h b/include/crypto/hash.h index 13f8a6a54ca8..b2bc1e46e86a 100644 --- a/include/crypto/hash.h +++ b/include/crypto/hash.h @@ -281,6 +281,8 @@ static inline struct crypto_tfm *crypto_ahash_tfm(struct crypto_ahash *tfm) /** * crypto_free_ahash() - zeroize and free the ahash handle * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_ahash(struct crypto_ahash *tfm) { @@ -724,6 +726,8 @@ static inline struct crypto_tfm *crypto_shash_tfm(struct crypto_shash *tfm) /** * crypto_free_shash() - zeroize and free the message digest handle * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_shash(struct crypto_shash *tfm) { diff --git a/include/crypto/kpp.h b/include/crypto/kpp.h index 88b591215d5c..cccceadc164b 100644 --- a/include/crypto/kpp.h +++ b/include/crypto/kpp.h @@ -154,6 +154,8 @@ static inline void crypto_kpp_set_flags(struct crypto_kpp *tfm, u32 flags) * crypto_free_kpp() - free KPP tfm handle * * @tfm: KPP tfm handle allocated with crypto_alloc_kpp() + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_kpp(struct crypto_kpp *tfm) { diff --git a/include/crypto/rng.h b/include/crypto/rng.h index 8b4b844b4eef..17bb3673d3c1 100644 --- a/include/crypto/rng.h +++ b/include/crypto/rng.h @@ -111,6 +111,8 @@ static inline struct rng_alg *crypto_rng_alg(struct crypto_rng *tfm) /** * crypto_free_rng() - zeroize and free RNG handle * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_rng(struct crypto_rng *tfm) { diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h index 6a733b171a5d..ef0fc9ed4342 100644 --- a/include/crypto/skcipher.h +++ b/include/crypto/skcipher.h @@ -196,6 +196,8 @@ static inline struct crypto_tfm *crypto_skcipher_tfm( /** * crypto_free_skcipher() - zeroize and free cipher handle * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. */ static inline void crypto_free_skcipher(struct crypto_skcipher *tfm) {

From: Pawel Laszczak pawell@cadence.com

[ Upstream commit 26adde04acdff14a1f28d4a5dce46a8513a3038b ]

Patch adds extra checking for bInterval passed by configfs. The 5.6.4 chapter of USB Specification (rev. 2.0) say: "A high-bandwidth endpoint must specify a period of 1x125 µs (i.e., a bInterval value of 1)."

The issue was observed during testing UVC class on CV. I treat this change as improvement because we can control bInterval by configfs.

Reviewed-by: Peter Chen peter.chen@kernel.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Pawel Laszczak pawell@cadence.com Link: https://lore.kernel.org/r/20210308125338.4824-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_uvc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 44b4352a2676..ed77a126a74f 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -633,7 +633,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)

uvc_hs_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11)); - uvc_hs_streaming_ep.bInterval = opts->streaming_interval; + + /* A high-bandwidth endpoint must specify a bInterval value of 1 */ + if (max_packet_mult > 1) + uvc_hs_streaming_ep.bInterval = 1; + else + uvc_hs_streaming_ep.bInterval = opts->streaming_interval;

uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size); uvc_ss_streaming_ep.bInterval = opts->streaming_interval;

From: Joerg Roedel jroedel@suse.de

[ Upstream commit eab696d8e8b9c9d600be6fad8dd8dfdfaca6ca7c ]

A malicious hypervisor could disable the CPUID intercept for an SEV or SEV-ES guest and trick it into the no-SEV boot path, where it could potentially reveal secrets. This is not an issue for SEV-SNP guests, as the CPUID intercept can't be disabled for those.

Remove the Hypervisor CPUID bit check from the SEV detection code to protect against this kind of attack and add a Hypervisor bit equals zero check to the SME detection path to prevent non-encrypted guests from trying to enable SME.

This handles the following cases:

1) SEV(-ES) guest where CPUID intercept is disabled. The guest will still see leaf 0x8000001f and the SEV bit. It can retrieve the C-bit and boot normally.

2) Non-encrypted guests with intercepted CPUID will check the SEV_STATUS MSR and find it 0 and will try to enable SME. This will fail when the guest finds MSR_K8_SYSCFG to be zero, as it is emulated by KVM. But we can't rely on that, as there might be other hypervisors which return this MSR with bit 23 set. The Hypervisor bit check will prevent that the guest tries to enable SME in this case.

3) Non-encrypted guests on SEV capable hosts with CPUID intercept disabled (by a malicious hypervisor) will try to boot into the SME path. This will fail, but it is also not considered a problem because non-encrypted guests have no protection against the hypervisor anyway.

[ bp: s/non-SEV/non-encrypted/g ]

Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Tom Lendacky thomas.lendacky@amd.com Link: https://lkml.kernel.org/r/20210312123824.306-3-joro@8bytes.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/boot/compressed/mem_encrypt.S | 6 ----- arch/x86/kernel/sev-es-shared.c | 6 +---- arch/x86/mm/mem_encrypt_identity.c | 35 ++++++++++++++------------ 3 files changed, 20 insertions(+), 27 deletions(-)

diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S index aa561795efd1..a6dea4e8a082 100644 --- a/arch/x86/boot/compressed/mem_encrypt.S +++ b/arch/x86/boot/compressed/mem_encrypt.S @@ -23,12 +23,6 @@ SYM_FUNC_START(get_sev_encryption_bit) push %ecx push %edx

- /* Check if running under a hypervisor */ - movl $1, %eax - cpuid - bt $31, %ecx /* Check the hypervisor bit */ - jnc .Lno_sev - movl $0x80000000, %eax /* CPUID to check the highest leaf */ cpuid cmpl $0x8000001f, %eax /* See if 0x8000001f is available */ diff --git a/arch/x86/kernel/sev-es-shared.c b/arch/x86/kernel/sev-es-shared.c index cdc04d091242..387b71669818 100644 --- a/arch/x86/kernel/sev-es-shared.c +++ b/arch/x86/kernel/sev-es-shared.c @@ -186,7 +186,6 @@ void __init do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) * make it accessible to the hypervisor. * * In particular, check for: - * - Hypervisor CPUID bit * - Availability of CPUID leaf 0x8000001f * - SEV CPUID bit. * @@ -194,10 +193,7 @@ void __init do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) * can't be checked here. */

- if ((fn == 1 && !(regs->cx & BIT(31)))) - /* Hypervisor bit */ - goto fail; - else if (fn == 0x80000000 && (regs->ax < 0x8000001f)) + if (fn == 0x80000000 && (regs->ax < 0x8000001f)) /* SEV leaf check */ goto fail; else if ((fn == 0x8000001f && !(regs->ax & BIT(1)))) diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c index 6c5eb6f3f14f..a19374d26101 100644 --- a/arch/x86/mm/mem_encrypt_identity.c +++ b/arch/x86/mm/mem_encrypt_identity.c @@ -503,14 +503,10 @@ void __init sme_enable(struct boot_params *bp)

#define AMD_SME_BIT BIT(0) #define AMD_SEV_BIT BIT(1) - /* - * Set the feature mask (SME or SEV) based on whether we are - * running under a hypervisor. - */ - eax = 1; - ecx = 0; - native_cpuid(&eax, &ebx, &ecx, &edx); - feature_mask = (ecx & BIT(31)) ? AMD_SEV_BIT : AMD_SME_BIT; + + /* Check the SEV MSR whether SEV or SME is enabled */ + sev_status = __rdmsr(MSR_AMD64_SEV); + feature_mask = (sev_status & MSR_AMD64_SEV_ENABLED) ? AMD_SEV_BIT : AMD_SME_BIT;

/* * Check for the SME/SEV feature: @@ -530,19 +526,26 @@ void __init sme_enable(struct boot_params *bp)

/* Check if memory encryption is enabled */ if (feature_mask == AMD_SME_BIT) { + /* + * No SME if Hypervisor bit is set. This check is here to + * prevent a guest from trying to enable SME. For running as a + * KVM guest the MSR_K8_SYSCFG will be sufficient, but there + * might be other hypervisors which emulate that MSR as non-zero + * or even pass it through to the guest. + * A malicious hypervisor can still trick a guest into this + * path, but there is no way to protect against that. + */ + eax = 1; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + if (ecx & BIT(31)) + return; + /* For SME, check the SYSCFG MSR */ msr = __rdmsr(MSR_K8_SYSCFG); if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT)) return; } else { - /* For SEV, check the SEV MSR */ - msr = __rdmsr(MSR_AMD64_SEV); - if (!(msr & MSR_AMD64_SEV_ENABLED)) - return; - - /* Save SEV_STATUS to avoid reading MSR again */ - sev_status = msr; - /* SEV state cannot be controlled by a command line option */ sme_me_mask = me_mask; sev_enabled = true;

From: Longfang Liu liulongfang@huawei.com

[ Upstream commit 4b7aef0230418345be1fb77abbb1592801869901 ]

When the log is output here, the device has not been initialized yet.

Signed-off-by: Longfang Liu liulongfang@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/hisilicon/sec2/sec_crypto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c index 2eaa516b3231..8adcbb327126 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.c +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c @@ -546,7 +546,7 @@ static int sec_skcipher_init(struct crypto_skcipher *tfm) crypto_skcipher_set_reqsize(tfm, sizeof(struct sec_req)); ctx->c_ctx.ivsize = crypto_skcipher_ivsize(tfm); if (ctx->c_ctx.ivsize > SEC_IV_SIZE) { - dev_err(SEC_CTX_DEV(ctx), "get error skcipher iv size!\n"); + pr_err("get error skcipher iv size!\n"); return -EINVAL; }

From: Ruslan Bilovol ruslan.bilovol@gmail.com

[ Upstream commit 3713d5ceb04d5ab6a5e2b86dfca49170053f3a5e ]

Currently user can configure UAC2 function with parameters that violate UAC2 spec or are not supported by UAC2 gadget implementation.

This can lead to incorrect behavior if such gadget is connected to the host - like enumeration failure or other issues depending on host's UAC2 driver implementation, bringing user to a long hours of debugging the issue.

Instead of silently accept these parameters, throw an error if they are not valid.

Signed-off-by: Ruslan Bilovol ruslan.bilovol@gmail.com Link: https://lore.kernel.org/r/1614599375-8803-4-git-send-email-ruslan.bilovol@gm... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_uac2.c | 39 ++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 6f03e944e0e3..dd960cea642f 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -14,6 +14,9 @@ #include "u_audio.h" #include "u_uac2.h"

+/* UAC2 spec: 4.1 Audio Channel Cluster Descriptor */ +#define UAC2_CHANNEL_MASK 0x07FFFFFF + /* * The driver implements a simple UAC_2 topology. * USB-OUT -> IT_1 -> OT_3 -> ALSA_Capture @@ -604,6 +607,36 @@ static void setup_descriptor(struct f_uac2_opts *opts) hs_audio_desc[i] = NULL; }

+static int afunc_validate_opts(struct g_audio *agdev, struct device *dev) +{ + struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev); + + if (!opts->p_chmask && !opts->c_chmask) { + dev_err(dev, "Error: no playback and capture channels\n"); + return -EINVAL; + } else if (opts->p_chmask & ~UAC2_CHANNEL_MASK) { + dev_err(dev, "Error: unsupported playback channels mask\n"); + return -EINVAL; + } else if (opts->c_chmask & ~UAC2_CHANNEL_MASK) { + dev_err(dev, "Error: unsupported capture channels mask\n"); + return -EINVAL; + } else if ((opts->p_ssize < 1) || (opts->p_ssize > 4)) { + dev_err(dev, "Error: incorrect playback sample size\n"); + return -EINVAL; + } else if ((opts->c_ssize < 1) || (opts->c_ssize > 4)) { + dev_err(dev, "Error: incorrect capture sample size\n"); + return -EINVAL; + } else if (!opts->p_srate) { + dev_err(dev, "Error: incorrect playback sampling rate\n"); + return -EINVAL; + } else if (!opts->c_srate) { + dev_err(dev, "Error: incorrect capture sampling rate\n"); + return -EINVAL; + } + + return 0; +} + static int afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) { @@ -612,11 +645,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) struct usb_composite_dev *cdev = cfg->cdev; struct usb_gadget *gadget = cdev->gadget; struct device *dev = &gadget->dev; - struct f_uac2_opts *uac2_opts; + struct f_uac2_opts *uac2_opts = g_audio_to_uac2_opts(agdev); struct usb_string *us; int ret;

- uac2_opts = container_of(fn->fi, struct f_uac2_opts, func_inst); + ret = afunc_validate_opts(agdev, dev); + if (ret) + return ret;

us = usb_gstrings_attach(cdev, fn_strings, ARRAY_SIZE(strings_fn)); if (IS_ERR(us))

From: Wesley Cheng wcheng@codeaurora.org

[ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]

The current dwc3_gadget_reset_interrupt() will stop any active transfers, but only addresses blocking of EP queuing for while we are coming from a disconnected scenario, i.e. after receiving the disconnect event. If the host decides to issue a bus reset on the device, the connected parameter will still be set to true, allowing for EP queuing to continue while we are disabling the functions. To avoid this, set the connected flag to false until the stop active transfers is complete.

Signed-off-by: Wesley Cheng wcheng@codeaurora.org Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeauror... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/gadget.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 65ff41e3a18e..5b5520286eff 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3267,6 +3267,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) { u32 reg;

+ /* + * Ideally, dwc3_reset_gadget() would trigger the function + * drivers to stop any active transfers through ep disable. + * However, for functions which defer ep disable, such as mass + * storage, we will need to rely on the call to stop active + * transfers here, and avoid allowing of request queuing. + */ + dwc->connected = false; + /* * WORKAROUND: DWC3 revisions <1.88a have an issue which * would cause a missing Disconnect Event if there's a