This is a note to let you know that I've just added the patch titled

xhci: detect USB 3.2 capable host controllers correctly

to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From ddd57980a0fde30f7b5d14b888a2cc84d01610e8 Mon Sep 17 00:00:00 2001

From: Mathias Nyman mathias.nyman@linux.intel.com Date: Tue, 18 Jun 2019 17:27:48 +0300 Subject: xhci: detect USB 3.2 capable host controllers correctly

USB 3.2 capability in a host can be detected from the xHCI Supported Protocol Capability major and minor revision fields.

If major is 0x3 and minor 0x20 then the host is USB 3.2 capable.

For USB 3.2 capable hosts set the root hub lane count to 2.

The Major Revision and Minor Revision fields contain a BCD version number. The value of the Major Revision field is JJh and the value of the Minor Revision field is MNh for version JJ.M.N, where JJ = major revision number, M - minor version number, N = sub-minor version number, e.g. version 3.1 is represented with a value of 0310h.

Also fix the extra whitespace printed out when announcing regular SuperSpeed hosts.

Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 78a2a937dd83..3f79f35d0b19 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5065,16 +5065,26 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) } else { /* * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol - * minor revision instead of sbrn + * minor revision instead of sbrn. Minor revision is a two digit + * BCD containing minor and sub-minor numbers, only show minor. */ - minor_rev = xhci->usb3_rhub.min_rev; - if (minor_rev) { + minor_rev = xhci->usb3_rhub.min_rev / 0x10; + + switch (minor_rev) { + case 2: + hcd->speed = HCD_USB32; + hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + hcd->self.root_hub->rx_lanes = 2; + hcd->self.root_hub->tx_lanes = 2; + break; + case 1: hcd->speed = HCD_USB31; hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + break; } - xhci_info(xhci, "Host supports USB 3.%x %s SuperSpeed\n", + xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n", minor_rev, - minor_rev ? "Enhanced" : ""); + minor_rev ? "Enhanced " : "");

xhci->usb3_rhub.hcd = hcd; /* xHCI private pointer was set in xhci_pci_probe for the second