[PATCH AUTOSEL 5.10 01/27] wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
From: Minsuk Kang linuxlovemin@yonsei.ac.kr
[ Upstream commit f099c5c9e2ba08a379bd354a82e05ef839ae29ac ]
This patch fixes a use-after-free in ath9k that occurs in ath9k_hif_usb_disconnect() when ath9k_destroy_wmi() is trying to access 'drv_priv' that has already been freed by ieee80211_free_hw(), called by ath9k_htc_hw_deinit(). The patch moves ath9k_destroy_wmi() before ieee80211_free_hw(). Note that urbs from the driver should be killed before freeing 'wmi' with ath9k_destroy_wmi() as their callbacks will access 'wmi'.
Found by a modified version of syzkaller.
================================================================== BUG: KASAN: use-after-free in ath9k_destroy_wmi+0x38/0x40 Read of size 8 at addr ffff8881069132a0 by task kworker/0:1/7
CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x8e/0xd1 print_address_description.constprop.0.cold+0x93/0x334 ? ath9k_destroy_wmi+0x38/0x40 ? ath9k_destroy_wmi+0x38/0x40 kasan_report.cold+0x83/0xdf ? ath9k_destroy_wmi+0x38/0x40 ath9k_destroy_wmi+0x38/0x40 ath9k_hif_usb_disconnect+0x329/0x3f0 ? ath9k_hif_usb_suspend+0x120/0x120 ? usb_disable_interface+0xfc/0x180 usb_unbind_interface+0x19b/0x7e0 ? usb_autoresume_device+0x50/0x50 device_release_driver_internal+0x44d/0x520 bus_remove_device+0x2e5/0x5a0 device_del+0x5b2/0xe30 ? __device_link_del+0x370/0x370 ? usb_remove_ep_devs+0x43/0x80 ? remove_intf_ep_devs+0x112/0x1a0 usb_disable_device+0x1e3/0x5a0 usb_disconnect+0x267/0x870 hub_event+0x168d/0x3950 ? rcu_read_lock_sched_held+0xa1/0xd0 ? hub_port_debounce+0x2e0/0x2e0 ? check_irq_usage+0x860/0xf20 ? drain_workqueue+0x281/0x360 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x92b/0x1460 ? pwq_dec_nr_in_flight+0x330/0x330 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x95/0xe00 ? __kthread_parkme+0x115/0x1e0 ? process_one_work+0x1460/0x1460 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30
The buggy address belongs to the page: page:ffffea00041a44c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106913 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), pid 7, ts 38347963444, free_ts 41399957635 prep_new_page+0x1aa/0x240 get_page_from_freelist+0x159a/0x27c0 __alloc_pages+0x2da/0x6a0 alloc_pages+0xec/0x1e0 kmalloc_order+0x39/0xf0 kmalloc_order_trace+0x19/0x120 __kmalloc+0x308/0x390 wiphy_new_nm+0x6f5/0x1dd0 ieee80211_alloc_hw_nm+0x36d/0x2230 ath9k_htc_probe_device+0x9d/0x1e10 ath9k_htc_hw_init+0x34/0x50 ath9k_hif_usb_firmware_cb+0x25f/0x4e0 request_firmware_work_func+0x131/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 page last free stack trace: free_pcp_prepare+0x3d3/0x7f0 free_unref_page+0x1e/0x3d0 device_release+0xa4/0x240 kobject_put+0x186/0x4c0 put_device+0x20/0x30 ath9k_htc_disconnect_device+0x1cf/0x2c0 ath9k_htc_hw_deinit+0x26/0x30 ath9k_hif_usb_disconnect+0x2d9/0x3f0 usb_unbind_interface+0x19b/0x7e0 device_release_driver_internal+0x44d/0x520 bus_remove_device+0x2e5/0x5a0 device_del+0x5b2/0xe30 usb_disable_device+0x1e3/0x5a0 usb_disconnect+0x267/0x870 hub_event+0x168d/0x3950 process_one_work+0x92b/0x1460
Memory state around the buggy address: ffff888106913180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888106913200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888106913280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^ ffff888106913300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888106913380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ==================================================================
Reported-by: Dokyung Song dokyungs@yonsei.ac.kr Reported-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Reported-by: Minsuk Kang linuxlovemin@yonsei.ac.kr Signed-off-by: Minsuk Kang linuxlovemin@yonsei.ac.kr Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20221205014308.1617597-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/hif_usb.c | 2 -- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index f938ac1a4abd4..4d63f0021713f 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1412,8 +1412,6 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
if (hif_dev->flags & HIF_USB_READY) { ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged); - ath9k_hif_usb_dev_deinit(hif_dev); - ath9k_destroy_wmi(hif_dev->htc_handle->drv_priv); ath9k_htc_hw_free(hif_dev->htc_handle); }
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 07ac88fb1c577..96a3185a96d75 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -988,6 +988,8 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
ath9k_deinit_device(htc_handle->drv_priv); ath9k_stop_wmi(htc_handle->drv_priv); + ath9k_hif_usb_dealloc_urbs((struct hif_device_usb *)htc_handle->hif_dev); + ath9k_destroy_wmi(htc_handle->drv_priv); ieee80211_free_hw(htc_handle->drv_priv->hw); } }
From: Jisoo Jang jisoo.jang@yonsei.ac.kr
[ Upstream commit 0a06cadcc2a0044e4a117cc0e61436fc3a0dad69 ]
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware version string by memcpy() in brcmf_fil_iovar_data_get(). The patch ensures buf is null-terminated.
Found by a modified version of syzkaller.
[ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3 [ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 47.601565][ T1897] ================================================================== [ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0 [ 47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897 [ 47.604336][ T1897] [ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131 [ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event [ 47.607453][ T1897] Call Trace: [ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1 [ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334 [ 47.609009][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609434][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609863][ T1897] kasan_report.cold+0x83/0xdf [ 47.610366][ T1897] ? strsep+0x1b2/0x1f0 [ 47.610882][ T1897] strsep+0x1b2/0x1f0 [ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0 [ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40 [ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0 [ 47.614704][ T1897] ? find_held_lock+0x2d/0x110 [ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260 [ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 47.616288][ T1897] brcmf_attach+0x246/0xd40 [ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0 [ 47.617280][ T1897] ? kmemdup+0x43/0x50 [ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690 [ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760 [ 47.619429][ T1897] ? usb_probe_device+0x250/0x250 [ 47.619950][ T1897] really_probe+0x205/0xb70 [ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.622209][ T1897] driver_probe_device+0x4e/0x150 [ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.625437][ T1897] __device_attach+0x23f/0x3a0 [ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.627057][ T1897] bus_probe_device+0x1da/0x290 [ 47.627557][ T1897] device_add+0xb7b/0x1eb0 [ 47.628027][ T1897] ? wait_for_completion+0x290/0x290 [ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0 [ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0 [ 47.630385][ T1897] usb_probe_device+0xbb/0x250 [ 47.630927][ T1897] ? usb_suspend+0x590/0x590 [ 47.631397][ T1897] really_probe+0x205/0xb70 [ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.633002][ T1897] ? usb_generic_driver_match+0x75/0x90 [ 47.633573][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.634170][ T1897] driver_probe_device+0x4e/0x150 [ 47.634703][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.635248][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.635748][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.636271][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.636881][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.637396][ T1897] __device_attach+0x23f/0x3a0 [ 47.637904][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.638426][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.638985][ T1897] bus_probe_device+0x1da/0x290 [ 47.639512][ T1897] device_add+0xb7b/0x1eb0 [ 47.639977][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.640612][ T1897] ? kfree+0x14a/0x6b0 [ 47.641055][ T1897] ? __usb_get_extra_descriptor+0x116/0x160 [ 47.641679][ T1897] usb_new_device.cold+0x49c/0x1029 [ 47.642245][ T1897] ? hub_disconnect+0x450/0x450 [ 47.642756][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.643273][ T1897] ? _raw_spin_unlock_irq+0x24/0x30 [ 47.643822][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.644445][ T1897] hub_event+0x1c98/0x3950 [ 47.644939][ T1897] ? hub_port_debounce+0x2e0/0x2e0 [ 47.645467][ T1897] ? check_irq_usage+0x861/0xf20 [ 47.645975][ T1897] ? drain_workqueue+0x280/0x360 [ 47.646506][ T1897] ? lock_release+0x640/0x640 [ 47.646994][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.647572][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.648111][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.648735][ T1897] process_one_work+0x92b/0x1460 [ 47.649262][ T1897] ? pwq_dec_nr_in_flight+0x330/0x330 [ 47.649816][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.650336][ T1897] worker_thread+0x95/0xe00 [ 47.650830][ T1897] ? __kthread_parkme+0x115/0x1e0 [ 47.651361][ T1897] ? process_one_work+0x1460/0x1460 [ 47.651904][ T1897] kthread+0x3a1/0x480 [ 47.652329][ T1897] ? set_kthread_struct+0x120/0x120 [ 47.652878][ T1897] ret_from_fork+0x1f/0x30 [ 47.653370][ T1897] [ 47.653608][ T1897] [ 47.653848][ T1897] addr ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame: [ 47.654891][ T1897] brcmf_c_preinit_dcmds+0x0/0xc40 [ 47.655442][ T1897] [ 47.655690][ T1897] this frame has 4 objects: [ 47.656151][ T1897] [48, 56) 'ptr' [ 47.656159][ T1897] [80, 148) 'revinfo' [ 47.656534][ T1897] [192, 210) 'eventmask' [ 47.656953][ T1897] [256, 512) 'buf' [ 47.657410][ T1897] [ 47.658035][ T1897] Memory state around the buggy address: [ 47.658743][ T1897] ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.659577][ T1897] ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.660394][ T1897] >ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 47.661199][ T1897] ^ [ 47.661625][ T1897] ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.662455][ T1897] ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 [ 47.663318][ T1897] ================================================================== [ 47.664147][ T1897] Disabling lock debugging due to kernel taint
Reported-by: Dokyung Song dokyungs@yonsei.ac.kr Reported-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Reported-by: Minsuk Kang linuxlovemin@yonsei.ac.kr Signed-off-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index e3758bd86acf0..57bb1fbedaa87 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -264,6 +264,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) err); goto done; } + buf[sizeof(buf) - 1] = '\0'; ptr = (char *)buf; strsep(&ptr, "\n");
From: "Paul E. McKenney" paulmck@kernel.org
[ Upstream commit 0cae5ded535c3a80aed94f119bbd4ee3ae284a65 ]
Currently, RCU_LOCKDEP_WARN() checks the condition before checking to see if lockdep is still enabled. This is necessary to avoid the false-positive splats fixed by commit 3066820034b5dd ("rcu: Reject RCU_LOCKDEP_WARN() false positives"). However, the current state can result in false-positive splats during early boot before lockdep is fully initialized. This commit therefore checks debug_lockdep_rcu_enabled() both before and after checking the condition, thus avoiding both sets of false-positive error reports.
Reported-by: Steven Rostedt rostedt@goodmis.org Reported-by: Masami Hiramatsu (Google) mhiramat@kernel.org Reported-by: Mathieu Desnoyers mathieu.desnoyers@efficios.com Signed-off-by: Paul E. McKenney paulmck@kernel.org Reviewed-by: Mathieu Desnoyers mathieu.desnoyers@efficios.com Cc: Boqun Feng boqun.feng@gmail.com Cc: Matthew Wilcox willy@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/rcupdate.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 095b3b39bd032..80e6c5bc50617 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -306,11 +306,18 @@ static inline int rcu_read_lock_any_held(void) * RCU_LOCKDEP_WARN - emit lockdep splat if specified condition is met * @c: condition to check * @s: informative message + * + * This checks debug_lockdep_rcu_enabled() before checking (c) to + * prevent early boot splats due to lockdep not yet being initialized, + * and rechecks it after checking (c) to prevent false-positive splats + * due to races with lockdep being disabled. See commit 3066820034b5dd + * ("rcu: Reject RCU_LOCKDEP_WARN() false positives") for more detail. */ #define RCU_LOCKDEP_WARN(c, s) \ do { \ static bool __section(".data.unlikely") __warned; \ - if ((c) && debug_lockdep_rcu_enabled() && !__warned) { \ + if (debug_lockdep_rcu_enabled() && (c) && \ + debug_lockdep_rcu_enabled() && !__warned) { \ __warned = true; \ lockdep_rcu_suspicious(__FILE__, __LINE__, s); \ } \
From: "Paul E. McKenney" paulmck@kernel.org
[ Upstream commit 2d7f00b2f01301d6e41fd4a28030dab0442265be ]
The normal grace period's RCU CPU stall warnings are invoked from the scheduling-clock interrupt handler, and can thus invoke smp_processor_id() with impunity, which allows them to directly invoke dump_cpu_task(). In contrast, the expedited grace period's RCU CPU stall warnings are invoked from process context, which causes the dump_cpu_task() function's calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/rcu/tree_exp.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h index 0dc16345e668c..ef6570137dcd5 100644 --- a/kernel/rcu/tree_exp.h +++ b/kernel/rcu/tree_exp.h @@ -564,7 +564,9 @@ static void synchronize_rcu_expedited_wait(void) mask = leaf_node_cpu_bit(rnp, cpu); if (!(READ_ONCE(rnp->expmask) & mask)) continue; + preempt_disable(); // For smp_processor_id() in dump_cpu_task(). dump_cpu_task(cpu); + preempt_enable(); } } jiffies_stall = 3 * rcu_jiffies_till_stall_check() + 3;
From: Zqiang qiang1.zhang@intel.com
[ Upstream commit ea5c8987fef20a8cca07e428aa28bc64649c5104 ]
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp() to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp() function in turn checks if there is only a single online CPU. If so, it will immediately return, because a call to synchronize_rcu_tasks_rude() is by definition a grace period on a single-CPU system. (We could have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization, which can result in too-short grace periods. To see this, consider the following scenario:
CPU0 CPU1 (going offline) migration/1 task: cpu_stopper_thread -> take_cpu_down -> _cpu_disable (dec __num_online_cpus) ->cpuhp_invoke_callback preempt_disable access old_data0 task1 del old_data0 ..... synchronize_rcu_tasks_rude() task1 schedule out .... task2 schedule in rcu_tasks_rude_wait_gp() ->__num_online_cpus == 1 ->return .... task1 schedule in ->free old_data0 preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However, CPU1 has not finished going offline, and will take one last trip through the scheduler and the idle loop before it actually stops executing instructions. Because synchronize_rcu_tasks_rude() is mostly used for tracing, and because both the scheduler and the idle loop can be traced, this means that CPU0's prematurely ended grace period might disrupt the tracing on CPU1. Given that this disruption might include CPU1 executing instructions in memory that was just now freed (and maybe reallocated), this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU optimization, but there is no evidence indicating that this optimization is important. In addition, synchronize_rcu_tasks_generic() contains a similar optimization (albeit only for early boot), which also splats. (As in exactly why are you invoking synchronize_rcu_tasks_rude() so early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be unsynchronized because the only times that this check can evaluate to true is when there is only a single CPU running with preemption disabled.
While in the area, this commit also fixes a minor bug in which a call to synchronize_rcu_tasks_rude() would instead be attributed to synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang qiang1.zhang@intel.com Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/rcu/tasks.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index 8b51e6a5b3869..bdbed55367825 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -171,8 +171,9 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, static void synchronize_rcu_tasks_generic(struct rcu_tasks *rtp) { /* Complain if the scheduler has not started. */ - WARN_ONCE(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE, - "synchronize_rcu_tasks called too soon"); + if (WARN_ONCE(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE, + "synchronize_%s() called too soon", rtp->name)) + return;
/* Wait for the grace period. */ wait_rcu_gp(rtp->call_func); @@ -620,9 +621,6 @@ static void rcu_tasks_be_rude(struct work_struct *work) // Wait for one rude RCU-tasks grace period. static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp) { - if (num_online_cpus() <= 1) - return; // Fastpath for only one CPU. - rtp->n_ipis += cpumask_weight(cpu_online_mask); schedule_on_each_cpu(rcu_tasks_be_rude); }
From: Kalle Valo quic_kvalo@quicinc.com
[ Upstream commit 323d91d4684d238f6bc3693fed93caf795378fe0 ]
ath11k fails to load if there are multiple ath11k PCI devices with same name:
ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0 debugfs: Directory 'ath11k' with parent '/' already present! ath11k_pci 0000:01:00.0: failed to create ath11k debugfs ath11k_pci 0000:01:00.0: failed to create soc core: -17 ath11k_pci 0000:01:00.0: failed to init core: -17 ath11k_pci: probe of 0000:01:00.0 failed with error -17
Fix this by creating a directory for each ath11k device using schema <bus>-<devname>, for example "pci-0000:06:00.0". This directory created under the top-level ath11k directory, for example /sys/kernel/debug/ath11k.
The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead it's retrieved using debugfs_lookup(). If the directory does not exist it will be created. After the last directory from the ath11k directory is removed, for example when doing rmmod ath11k, the empty ath11k directory is left in place, it's a minor cosmetic issue anyway.
Here's an example hierarchy with one WCN6855:
ath11k `-- pci-0000:06:00.0 |-- mac0 | |-- dfs_block_radar_events | |-- dfs_simulate_radar | |-- ext_rx_stats | |-- ext_tx_stats | |-- fw_dbglog_config | |-- fw_stats | | |-- beacon_stats | | |-- pdev_stats | | `-- vdev_stats | |-- htt_stats | |-- htt_stats_reset | |-- htt_stats_type | `-- pktlog_filter |-- simulate_fw_crash `-- soc_dp_stats
I didn't have a test setup where I could connect multiple ath11k devices to the same the host, so I have only tested this with one device.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-by: Robert Marko robert.marko@sartura.hr Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20221220121231.20120-1-kvalo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/core.h | 1 - drivers/net/wireless/ath/ath11k/debugfs.c | 48 +++++++++++++++++++---- 2 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index d2f2898d17b49..a66e275af1eb4 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -712,7 +712,6 @@ struct ath11k_base { enum ath11k_dfs_region dfs_region; #ifdef CONFIG_ATH11K_DEBUGFS struct dentry *debugfs_soc; - struct dentry *debugfs_ath11k; #endif struct ath11k_soc_dp_stats soc_stats;
diff --git a/drivers/net/wireless/ath/ath11k/debugfs.c b/drivers/net/wireless/ath/ath11k/debugfs.c index 1b914e67d314d..196314ab4ff0b 100644 --- a/drivers/net/wireless/ath/ath11k/debugfs.c +++ b/drivers/net/wireless/ath/ath11k/debugfs.c @@ -836,10 +836,6 @@ int ath11k_debugfs_pdev_create(struct ath11k_base *ab) if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags)) return 0;
- ab->debugfs_soc = debugfs_create_dir(ab->hw_params.name, ab->debugfs_ath11k); - if (IS_ERR(ab->debugfs_soc)) - return PTR_ERR(ab->debugfs_soc); - debugfs_create_file("simulate_fw_crash", 0600, ab->debugfs_soc, ab, &fops_simulate_fw_crash);
@@ -857,15 +853,51 @@ void ath11k_debugfs_pdev_destroy(struct ath11k_base *ab)
int ath11k_debugfs_soc_create(struct ath11k_base *ab) { - ab->debugfs_ath11k = debugfs_create_dir("ath11k", NULL); + struct dentry *root; + bool dput_needed; + char name[64]; + int ret; + + root = debugfs_lookup("ath11k", NULL); + if (!root) { + root = debugfs_create_dir("ath11k", NULL); + if (IS_ERR_OR_NULL(root)) + return PTR_ERR(root); + + dput_needed = false; + } else { + /* a dentry from lookup() needs dput() after we don't use it */ + dput_needed = true; + } + + scnprintf(name, sizeof(name), "%s-%s", ath11k_bus_str(ab->hif.bus), + dev_name(ab->dev)); + + ab->debugfs_soc = debugfs_create_dir(name, root); + if (IS_ERR_OR_NULL(ab->debugfs_soc)) { + ret = PTR_ERR(ab->debugfs_soc); + goto out; + } + + ret = 0;
- return PTR_ERR_OR_ZERO(ab->debugfs_ath11k); +out: + if (dput_needed) + dput(root); + + return ret; }
void ath11k_debugfs_soc_destroy(struct ath11k_base *ab) { - debugfs_remove_recursive(ab->debugfs_ath11k); - ab->debugfs_ath11k = NULL; + debugfs_remove_recursive(ab->debugfs_soc); + ab->debugfs_soc = NULL; + + /* We are not removing ath11k directory on purpose, even if it + * would be empty. This simplifies the directory handling and it's + * a minor cosmetic issue to leave an empty ath11k directory to + * debugfs. + */ }
void ath11k_debugfs_fw_stats_init(struct ath11k *ar)
From: Yang Li yang.lee@linux.alibaba.com
[ Upstream commit e7fcfe67f9f410736b758969477b17ea285e8e6c ]
The return value from the call to intel_tcc_get_tjmax() is int, which can be a negative error code. However, the return value is being assigned to an u32 variable 'tj_max', so making 'tj_max' an int.
Eliminate the following warning: ./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637 Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Yang Li yang.lee@linux.alibaba.com Acked-by: Zhang Rui rui.zhang@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/intel/intel_soc_dts_iosf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c index 4f1a2f7c016cc..8d6707e48d023 100644 --- a/drivers/thermal/intel/intel_soc_dts_iosf.c +++ b/drivers/thermal/intel/intel_soc_dts_iosf.c @@ -404,7 +404,7 @@ struct intel_soc_dts_sensors *intel_soc_dts_iosf_init( { struct intel_soc_dts_sensors *sensors; bool notification; - u32 tj_max; + int tj_max; int ret; int i;
From: Jann Horn jannh@google.com
[ Upstream commit 9f76d59173d9d146e96c66886b671c1915a5c5e5 ]
The nanosleep syscalls use the restart_block mechanism, with a quirk: The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on syscall entry, while the rest of the restart_block is only set up in the unlikely case that the syscall is actually interrupted by a signal (or pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(..., FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then, this will clobber some of the union fields used by futex_wait_restart() and do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall, futex_wait_restart()/do_restart_poll() will read struct fields that have been clobbered.
This doesn't actually lead to anything particularly interesting because none of the union fields contain trusted kernel data, and futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff, it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn jannh@google.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/hrtimer.c | 2 ++ kernel/time/posix-stubs.c | 2 ++ kernel/time/posix-timers.c | 2 ++ 3 files changed, 6 insertions(+)
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 544ce87ba38a7..70deb2f01e97a 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -2024,6 +2024,7 @@ SYSCALL_DEFINE2(nanosleep, struct __kernel_timespec __user *, rqtp, if (!timespec64_valid(&tu)) return -EINVAL;
+ current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE; current->restart_block.nanosleep.rmtp = rmtp; return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, @@ -2045,6 +2046,7 @@ SYSCALL_DEFINE2(nanosleep_time32, struct old_timespec32 __user *, rqtp, if (!timespec64_valid(&tu)) return -EINVAL;
+ current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE; current->restart_block.nanosleep.compat_rmtp = rmtp; return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, diff --git a/kernel/time/posix-stubs.c b/kernel/time/posix-stubs.c index fcb3b21d8bdcd..3783d07d60ba0 100644 --- a/kernel/time/posix-stubs.c +++ b/kernel/time/posix-stubs.c @@ -146,6 +146,7 @@ SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags, return -EINVAL; if (flags & TIMER_ABSTIME) rmtp = NULL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE; current->restart_block.nanosleep.rmtp = rmtp; texp = timespec64_to_ktime(t); @@ -239,6 +240,7 @@ SYSCALL_DEFINE4(clock_nanosleep_time32, clockid_t, which_clock, int, flags, return -EINVAL; if (flags & TIMER_ABSTIME) rmtp = NULL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE; current->restart_block.nanosleep.compat_rmtp = rmtp; texp = timespec64_to_ktime(t); diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c index b624788023d8f..724ca7eb1a6e8 100644 --- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -1270,6 +1270,7 @@ SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags, return -EINVAL; if (flags & TIMER_ABSTIME) rmtp = NULL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE; current->restart_block.nanosleep.rmtp = rmtp;
@@ -1297,6 +1298,7 @@ SYSCALL_DEFINE4(clock_nanosleep_time32, clockid_t, which_clock, int, flags, return -EINVAL; if (flags & TIMER_ABSTIME) rmtp = NULL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE; current->restart_block.nanosleep.compat_rmtp = rmtp;
From: Breno Leitao leitao@debian.org
[ Upstream commit 0125acda7d76b943ca55811df40ed6ec0ecf670f ]
Currently, x86_spec_ctrl_base is read at boot time and speculative bits are set if Kconfig items are enabled. For example, IBRS is enabled if CONFIG_CPU_IBRS_ENTRY is configured, etc. These MSR bits are not cleared if the mitigations are disabled.
This is a problem when kexec-ing a kernel that has the mitigation disabled from a kernel that has the mitigation enabled. In this case, the MSR bits are not cleared during the new kernel boot. As a result, this might have some performance degradation that is hard to pinpoint.
This problem does not happen if the machine is (hard) rebooted because the bit will be cleared by default.
[ bp: Massage. ]
Suggested-by: Pawan Gupta pawan.kumar.gupta@linux.intel.com Signed-off-by: Breno Leitao leitao@debian.org Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Link: https://lore.kernel.org/r/20221128153148.1129350-1-leitao@debian.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/msr-index.h | 4 ++++ arch/x86/kernel/cpu/bugs.c | 10 +++++++++- 2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 5a8ee3b83af2a..f71a177b6b185 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -54,6 +54,10 @@ #define SPEC_CTRL_RRSBA_DIS_S_SHIFT 6 /* Disable RRSBA behavior */ #define SPEC_CTRL_RRSBA_DIS_S BIT(SPEC_CTRL_RRSBA_DIS_S_SHIFT)
+/* A mask for bits which the kernel toggles when controlling mitigations */ +#define SPEC_CTRL_MITIGATIONS_MASK (SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD \ + | SPEC_CTRL_RRSBA_DIS_S) + #define MSR_IA32_PRED_CMD 0x00000049 /* Prediction Command */ #define PRED_CMD_IBPB BIT(0) /* Indirect Branch Prediction Barrier */
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index a2a087a797ae5..c5034986ea444 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -136,9 +136,17 @@ void __init check_bugs(void) * have unknown values. AMD64_LS_CFG MSR is cached in the early AMD * init code as it is not enumerated and depends on the family. */ - if (boot_cpu_has(X86_FEATURE_MSR_SPEC_CTRL)) + if (cpu_feature_enabled(X86_FEATURE_MSR_SPEC_CTRL)) { rdmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+ /* + * Previously running kernel (kexec), may have some controls + * turned ON. Clear them and let the mitigations setup below + * rediscover them based on configuration. + */ + x86_spec_ctrl_base &= ~SPEC_CTRL_MITIGATIONS_MASK; + } + /* Select the proper CPU mitigations before patching alternatives: */ spectre_v1_select_mitigation(); spectre_v2_select_mitigation();
From: Jisoo Jang jisoo.jang@yonsei.ac.kr
[ Upstream commit 660145d708be52f946a82e5b633c020f58f996de ]
Fix a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with a CLM version string by memcpy() in brcmf_fil_iovar_data_get(). Ensure buf is null-terminated.
Found by a modified version of syzkaller.
[ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22 [ 33.021554][ T1896] ================================================================== [ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110 [ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896 [ 33.023852][ T1896] [ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 [ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event [ 33.026581][ T1896] Call Trace: [ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d [ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334 [ 33.028037][ T1896] ? strreplace+0xf2/0x110 [ 33.028403][ T1896] ? strreplace+0xf2/0x110 [ 33.028807][ T1896] kasan_report.cold+0x83/0xdf [ 33.029283][ T1896] ? strreplace+0xf2/0x110 [ 33.029666][ T1896] strreplace+0xf2/0x110 [ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40 [ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0 [ 33.032091][ T1896] ? find_held_lock+0x2d/0x110 [ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260 [ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 33.033582][ T1896] brcmf_attach+0x246/0xd40 [ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50 [ 33.034383][ T1896] ? kmemdup+0x30/0x40 [ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690 [ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 33.035833][ T1896] usb_probe_interface+0x25f/0x710 [ 33.036315][ T1896] really_probe+0x1be/0xa90 [ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0 [ 33.037383][ T1896] driver_probe_device+0x49/0x120 [ 33.037790][ T1896] __device_attach_driver+0x18a/0x250 [ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.042330][ T1896] __device_attach+0x207/0x330 [ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.043515][ T1896] bus_probe_device+0x1a2/0x260 [ 33.043914][ T1896] device_add+0xa61/0x1ce0 [ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660 [ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.045531][ T1896] usb_set_configuration+0x984/0x1770 [ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230 [ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90 [ 33.046931][ T1896] usb_probe_device+0x9c/0x220 [ 33.047434][ T1896] really_probe+0x1be/0xa90 [ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.048134][ T1896] driver_probe_device+0x49/0x120 [ 33.048516][ T1896] __device_attach_driver+0x18a/0x250 [ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.050936][ T1896] __device_attach+0x207/0x330 [ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.052314][ T1896] bus_probe_device+0x1a2/0x260 [ 33.052688][ T1896] device_add+0xa61/0x1ce0 [ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66 [ 33.053953][ T1896] ? hub_disconnect+0x400/0x400 [ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.055094][ T1896] hub_event+0x10d5/0x3330 [ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280 [ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790 [ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0 [ 33.056924][ T1896] ? lock_release+0x640/0x640 [ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.059019][ T1896] process_one_work+0x873/0x13e0 [ 33.059488][ T1896] ? lock_release+0x640/0x640 [ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320 [ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.060898][ T1896] worker_thread+0x8b/0xd10 [ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0 [ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0 [ 33.062288][ T1896] kthread+0x379/0x450 [ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30 [ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100 [ 33.063606][ T1896] ret_from_fork+0x1f/0x30 [ 33.064070][ T1896] [ 33.064313][ T1896] [ 33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame: [ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40 [ 33.065973][ T1896] [ 33.066191][ T1896] this frame has 4 objects: [ 33.066614][ T1896] [48, 56) 'ptr' [ 33.066618][ T1896] [80, 148) 'revinfo' [ 33.066957][ T1896] [192, 210) 'eventmask' [ 33.067338][ T1896] [256, 512) 'buf' [ 33.067742][ T1896] [ 33.068304][ T1896] Memory state around the buggy address: [ 33.068838][ T1896] ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 33.069545][ T1896] ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 33.072052][ T1896] ^ [ 33.073043][ T1896] ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074230][ T1896] ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074914][ T1896] ================================================================== [ 33.075713][ T1896] Disabling lock debugging due to kernel taint
Reviewed-by: Arend van Sprielarend.vanspriel@broadcom.com Signed-off-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index 57bb1fbedaa87..f29de630908d7 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -281,15 +281,17 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) if (err) { brcmf_dbg(TRACE, "retrieving clmver failed, %d\n", err); } else { + buf[sizeof(buf) - 1] = '\0'; clmver = (char *)buf; - /* store CLM version for adding it to revinfo debugfs file */ - memcpy(ifp->drvr->clmver, clmver, sizeof(ifp->drvr->clmver));
/* Replace all newline/linefeed characters with space * character */ strreplace(clmver, '\n', ' ');
+ /* store CLM version for adding it to revinfo debugfs file */ + memcpy(ifp->drvr->clmver, clmver, sizeof(ifp->drvr->clmver)); + brcmf_dbg(INFO, "CLM version = %s\n", clmver); }
From: Jisoo Jang jisoo.jang@yonsei.ac.kr
[ Upstream commit 803f3176c5df3b5582c27ea690f204abb60b19b9 ]
Fix an integer underflow that leads to a null pointer dereference in 'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet could be manipulated, which could trigger an integer underflow of 'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be bypassed, eventually leading to a dereference of the pointer 'p', which is a null pointer.
Ensure that 'dma_len' is greater than 'min_seg_len'.
Found by a modified version of syzkaller.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G W O 5.14.0+ #139 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: mt7601u_rx_tasklet+0xc73/0x1270 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510 ? tasklet_action_common.isra.0+0x79/0x2f0 tasklet_action_common.isra.0+0x206/0x2f0 __do_softirq+0x1b5/0x880 ? tasklet_unlock+0x30/0x30 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x34f/0x7d0 ? smpboot_register_percpu_thread+0x370/0x370 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 57f34f93b4da0f9b ]--- RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554
Signed-off-by: Jisoo Jang jisoo.jang@yonsei.ac.kr Acked-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20221229092906.2328282-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt7601u/dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c index 11071519fce81..8ba291abecff8 100644 --- a/drivers/net/wireless/mediatek/mt7601u/dma.c +++ b/drivers/net/wireless/mediatek/mt7601u/dma.c @@ -118,7 +118,8 @@ static u16 mt7601u_rx_next_seg_len(u8 *data, u32 data_len) if (data_len < min_seg_len || WARN_ON_ONCE(!dma_len) || WARN_ON_ONCE(dma_len + MT_DMA_HDRS > data_len) || - WARN_ON_ONCE(dma_len & 0x3)) + WARN_ON_ONCE(dma_len & 0x3) || + WARN_ON_ONCE(dma_len < min_seg_len)) return 0;
return MT_DMA_HDRS + dma_len;
From: Pietro Borrello borrello@diag.uniroma1.it
[ Upstream commit 21cbd90a6fab7123905386985e3e4a80236b8714 ]
__inet_hash_connect() has a fast path taken if sk_head(&tb->owners) is equal to the sk parameter. sk_head() returns the hlist_entry() with respect to the sk_node field. However entries in the tb->owners list are inserted with respect to the sk_bind_node field with sk_add_bind_node(). Thus the check would never pass and the fast path never execute.
This fast path has never been executed or tested as this bug seems to be present since commit 1da177e4c3f4 ("Linux-2.6.12-rc2"), thus remove it to reduce code complexity.
Signed-off-by: Pietro Borrello borrello@diag.uniroma1.it Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20230112-inet_hash_connect_bind_head-v3-1-b591fd21... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/inet_hashtables.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 2615b72118d1f..79bf550c9dfc5 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -760,17 +760,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, u32 index;
if (port) { - head = &hinfo->bhash[inet_bhashfn(net, port, - hinfo->bhash_size)]; - tb = inet_csk(sk)->icsk_bind_hash; - spin_lock_bh(&head->lock); - if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) { - inet_ehash_nolisten(sk, NULL, NULL); - spin_unlock_bh(&head->lock); - return 0; - } - spin_unlock(&head->lock); - /* No definite answer... Walk to established hash table */ + local_bh_disable(); ret = check_established(death_row, sk, port, NULL); local_bh_enable(); return ret;
From: Jesse Brandeburg jesse.brandeburg@intel.com
[ Upstream commit 6a8d013e904ad9a66706fcc926ec9993bed7d190 ]
There were a few places we had missed checking the VSI type to make sure it was definitely a PF VSI, before calling setup functions intended only for the PF VSI.
This doesn't fix any explicit bugs but cleans up the code in a few places and removes one explicit != vsi->type check that can be superseded by this code (it's a super set)
Signed-off-by: Jesse Brandeburg jesse.brandeburg@intel.com Tested-by: Gurucharan G gurucharanx.g@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index c1465096239b6..4f0d63fa5709b 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -5200,15 +5200,12 @@ int ice_vsi_cfg(struct ice_vsi *vsi) { int err;
- if (vsi->netdev) { + if (vsi->netdev && vsi->type == ICE_VSI_PF) { ice_set_rx_mode(vsi->netdev);
- if (vsi->type != ICE_VSI_LB) { - err = ice_vsi_vlan_setup(vsi); - - if (err) - return err; - } + err = ice_vsi_vlan_setup(vsi); + if (err) + return err; } ice_vsi_cfg_dcb_rings(vsi);
@@ -5267,7 +5264,7 @@ static int ice_up_complete(struct ice_vsi *vsi)
if (vsi->port_info && (vsi->port_info->phy.link_info.link_info & ICE_AQ_LINK_UP) && - vsi->netdev) { + vsi->netdev && vsi->type == ICE_VSI_PF) { ice_print_link_msg(vsi, true); netif_tx_start_all_queues(vsi->netdev); netif_carrier_on(vsi->netdev); @@ -5277,7 +5274,9 @@ static int ice_up_complete(struct ice_vsi *vsi) * set the baseline so counters are ready when interface is up */ ice_update_eth_stats(vsi); - ice_service_task_schedule(pf); + + if (vsi->type == ICE_VSI_PF) + ice_service_task_schedule(pf);
return 0; }
From: Mark Rutland mark.rutland@arm.com
[ Upstream commit 8f9e0a52810dd83406c768972d022c37e7a18f1f ]
The ACPICA code has been built with '-Os' since the beginning of git history, though there's no explanatory comment as to why.
This is unfortunate as GCC drops the alignment specificed by '-falign-functions=N' when '-Os' is used, as reported in GCC bug 88345:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
This prevents CONFIG_FUNCTION_ALIGNMENT and CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect on the ACPICA code. This is doubly unfortunate as in subsequent patches arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace implementation.
Drop the '-Os' flag when building the ACPICA code. With this removed, the code builds cleanly and works correctly in testing so far.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y, building and booting a kernel using ACPI, and looking for misaligned text symbols:
* arm64:
Before, v6.2-rc3: # uname -rm 6.2.0-rc3 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 5009
Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 919
After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 323 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0
* x86_64:
Before, v6.2-rc3: # uname -rm 6.2.0-rc3 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 11537
Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 2805
After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 1357 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0
With the patch applied, the remaining unaligned text labels are a combination of static call trampolines and labels in assembly, which can be dealt with in subsequent patches.
Signed-off-by: Mark Rutland mark.rutland@arm.com Acked-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Cc: Florent Revest revest@chromium.org Cc: Len Brown lenb@kernel.org Cc: Masami Hiramatsu mhiramat@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Robert Moore robert.moore@intel.com Cc: Steven Rostedt rostedt@goodmis.org Cc: Will Deacon will@kernel.org Cc: linux-acpi@vger.kernel.org Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 59700433a96e5..f919811156b1f 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -3,7 +3,7 @@ # Makefile for ACPICA Core interpreter #
-ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA +ccflags-y := -D_LINUX -DBUILDING_ACPICA ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
# use acpi.o to put all files here into acpi.o modparam namespace
From: Feng Tang feng.tang@intel.com
[ Upstream commit b7082cdfc464bf9231300605d03eebf943dda307 ]
Bugs have been reported on 8 sockets x86 machines in which the TSC was wrongly disabled when the system is under heavy workload.
[ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns [ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped! [ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns [ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped! [ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable [ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog [ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998) [ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564. [ 821.067990] clocksource: Switched to clocksource hpet
This can be reproduced by running memory intensive 'stream' tests, or some of the stress-ng subcases such as 'ioport'.
The reason for these issues is the when system is under heavy load, the read latency of the clocksources can be very high. Even lightweight TSC reads can show high latencies, and latencies are much worse for external clocksources such as HPET or the APIC PM timer. These latencies can result in false-positive clocksource-unstable determinations.
These issues were initially reported by a customer running on a production system, and this problem was reproduced on several generations of Xeon servers, especially when running the stress-ng test. These Xeon servers were not production systems, but they did have the latest steppings and firmware.
Given that the clocksource watchdog is a continual diagnostic check with frequency of twice a second, there is no need to rush it when the system is under heavy load. Therefore, when high clocksource read latencies are detected, suspend the watchdog timer for 5 minutes.
Signed-off-by: Feng Tang feng.tang@intel.com Acked-by: Waiman Long longman@redhat.com Cc: John Stultz jstultz@google.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Stephen Boyd sboyd@kernel.org Cc: Feng Tang feng.tang@intel.com Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/clocksource.c | 45 ++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index e34ceb91f4c5a..86e0fbe583f2b 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -312,6 +312,15 @@ static void clocksource_verify_percpu(struct clocksource *cs) testcpu, cs_nsec_min, cs_nsec_max, cs->name); }
+static inline void clocksource_reset_watchdog(void) +{ + struct clocksource *cs; + + list_for_each_entry(cs, &watchdog_list, wd_list) + cs->flags &= ~CLOCK_SOURCE_WATCHDOG; +} + + static void clocksource_watchdog(struct timer_list *unused) { u64 csnow, wdnow, cslast, wdlast, delta; @@ -319,6 +328,7 @@ static void clocksource_watchdog(struct timer_list *unused) int64_t wd_nsec, cs_nsec; struct clocksource *cs; enum wd_read_status read_ret; + unsigned long extra_wait = 0; u32 md;
spin_lock(&watchdog_lock); @@ -338,13 +348,30 @@ static void clocksource_watchdog(struct timer_list *unused)
read_ret = cs_watchdog_read(cs, &csnow, &wdnow);
- if (read_ret != WD_READ_SUCCESS) { - if (read_ret == WD_READ_UNSTABLE) - /* Clock readout unreliable, so give it up. */ - __clocksource_unstable(cs); + if (read_ret == WD_READ_UNSTABLE) { + /* Clock readout unreliable, so give it up. */ + __clocksource_unstable(cs); continue; }
+ /* + * When WD_READ_SKIP is returned, it means the system is likely + * under very heavy load, where the latency of reading + * watchdog/clocksource is very big, and affect the accuracy of + * watchdog check. So give system some space and suspend the + * watchdog check for 5 minutes. + */ + if (read_ret == WD_READ_SKIP) { + /* + * As the watchdog timer will be suspended, and + * cs->last could keep unchanged for 5 minutes, reset + * the counters. + */ + clocksource_reset_watchdog(); + extra_wait = HZ * 300; + break; + } + /* Clocksource initialized ? */ if (!(cs->flags & CLOCK_SOURCE_WATCHDOG) || atomic_read(&watchdog_reset_pending)) { @@ -434,7 +461,7 @@ static void clocksource_watchdog(struct timer_list *unused) * pair clocksource_stop_watchdog() clocksource_start_watchdog(). */ if (!timer_pending(&watchdog_timer)) { - watchdog_timer.expires += WATCHDOG_INTERVAL; + watchdog_timer.expires += WATCHDOG_INTERVAL + extra_wait; add_timer_on(&watchdog_timer, next_cpu); } out: @@ -459,14 +486,6 @@ static inline void clocksource_stop_watchdog(void) watchdog_running = 0; }
-static inline void clocksource_reset_watchdog(void) -{ - struct clocksource *cs; - - list_for_each_entry(cs, &watchdog_list, wd_list) - cs->flags &= ~CLOCK_SOURCE_WATCHDOG; -} - static void clocksource_resume_watchdog(void) { atomic_inc(&watchdog_reset_pending);
From: Kees Cook keescook@chromium.org
[ Upstream commit aa85923a954e7704bc9d3847dabeb8540aa98d13 ]
To work around a Clang __builtin_object_size bug that shows up under CONFIG_FORTIFY_SOURCE and UBSAN_BOUNDS, move the per-loop-iteration mem_block wipe into a single wipe of the entire pool structure after the loop.
Reported-by: Nathan Chancellor nathan@kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1780 Cc: Weili Qian qianweili@huawei.com Cc: Zhou Wang wangzhou1@hisilicon.com Cc: Herbert Xu herbert@gondor.apana.org.au Cc: "David S. Miller" davem@davemloft.net Cc: linux-crypto@vger.kernel.org Signed-off-by: Kees Cook keescook@chromium.org Tested-by: Nathan Chancellor nathan@kernel.org # build Link: https://lore.kernel.org/r/20230106041945.never.831-kees@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/hisilicon/sgl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/crypto/hisilicon/sgl.c b/drivers/crypto/hisilicon/sgl.c index 725a739800b0a..ce77826c7fb05 100644 --- a/drivers/crypto/hisilicon/sgl.c +++ b/drivers/crypto/hisilicon/sgl.c @@ -113,9 +113,8 @@ struct hisi_acc_sgl_pool *hisi_acc_create_sgl_pool(struct device *dev, for (j = 0; j < i; j++) { dma_free_coherent(dev, block_size, block[j].sgl, block[j].sgl_dma); - memset(block + j, 0, sizeof(*block)); } - kfree(pool); + kfree_sensitive(pool); return ERR_PTR(-ENOMEM); } EXPORT_SYMBOL_GPL(hisi_acc_create_sgl_pool);
From: Breno Leitao leitao@debian.org
[ Upstream commit d8afe2f8a92d2aac3df645772f6ee61b0b2fc147 ]
This patch removes the msleep(4s) during netpoll_setup() if the carrier appears instantly.
Here are some scenarios where this workaround is counter-productive in modern ages:
Servers which have BMC communicating over NC-SI via the same NIC as gets used for netconsole. BMC will keep the PHY up, hence the carrier appearing instantly.
The link is fibre, SERDES getting sync could happen within 0.1Hz, and the carrier also appears instantly.
Other than that, if a driver is reporting instant carrier and then losing it, this is probably a driver bug.
Reported-by: Michael van der Westhuizen rmikey@meta.com Signed-off-by: Breno Leitao leitao@debian.org Link: https://lore.kernel.org/r/20230125185230.3574681-1-leitao@debian.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/netpoll.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 960948290001e..ee2022b9616bf 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -694,7 +694,7 @@ int netpoll_setup(struct netpoll *np) }
if (!netif_running(ndev)) { - unsigned long atmost, atleast; + unsigned long atmost;
np_info(np, "device %s not up yet, forcing it\n", np->dev_name);
@@ -706,7 +706,6 @@ int netpoll_setup(struct netpoll *np) }
rtnl_unlock(); - atleast = jiffies + HZ/10; atmost = jiffies + carrier_timeout * HZ; while (!netif_carrier_ok(ndev)) { if (time_after(jiffies, atmost)) { @@ -716,15 +715,6 @@ int netpoll_setup(struct netpoll *np) msleep(1); }
- /* If carrier appears to come up instantly, we don't - * trust it and pause so that we don't pump all our - * queued console messages into the bitbucket. - */ - - if (time_before(jiffies, atleast)) { - np_notice(np, "carrier detect appears untrustworthy, waiting 4 seconds\n"); - msleep(4000); - } rtnl_lock(); }
From: Florian Fainelli f.fainelli@gmail.com
[ Upstream commit 5c0862c2c962052ed5055220a00ac1cefb92fbcd ]
Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet.
Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index e0a6a2e62d23b..7667cbb5adfd6 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2263,6 +2263,14 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring, __func__, p_index, ring->c_index, ring->read_ptr, dma_length_status);
+ if (unlikely(len > RX_BUF_LENGTH)) { + netif_err(priv, rx_status, dev, "oversized packet\n"); + dev->stats.rx_length_errors++; + dev->stats.rx_errors++; + dev_kfree_skb_any(skb); + goto next; + } + if (unlikely(!(dma_flag & DMA_EOP) || !(dma_flag & DMA_SOP))) { netif_err(priv, rx_status, dev, "dropping fragmented packet!\n");
From: Michael Schmitz schmitzmic@gmail.com
[ Upstream commit 2ca8a1de4437f21562e57f9ac123914747a8e7a1 ]
Check return code of syscall_trace_enter(), and skip syscall if -1. Return code will be left at what had been set by ptrace or seccomp (in regs->d0).
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz schmitzmic@gmail.com Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/68000/entry.S | 2 ++ arch/m68k/coldfire/entry.S | 2 ++ arch/m68k/kernel/entry.S | 3 +++ 3 files changed, 7 insertions(+)
diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S index 259b3661b6141..94abf3d8afc52 100644 --- a/arch/m68k/68000/entry.S +++ b/arch/m68k/68000/entry.S @@ -47,6 +47,8 @@ do_trace: jbsr syscall_trace_enter RESTORE_SWITCH_STACK addql #4,%sp + addql #1,%d0 + jeq ret_from_exception movel %sp@(PT_OFF_ORIG_D0),%d1 movel #-ENOSYS,%d0 cmpl #NR_syscalls,%d1 diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index d43a02795a4a4..f1d41a9328a27 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -92,6 +92,8 @@ ENTRY(system_call) jbsr syscall_trace_enter RESTORE_SWITCH_STACK addql #4,%sp + addql #1,%d0 + jeq ret_from_exception movel %d3,%a0 jbsr %a0@ movel %d0,%sp@(PT_OFF_D0) /* save the return value */ diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 9dd76fbb7c6b2..546bab6bfc273 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -167,9 +167,12 @@ do_trace_entry: jbsr syscall_trace RESTORE_SWITCH_STACK addql #4,%sp + addql #1,%d0 | optimization for cmpil #-1,%d0 + jeq ret_from_syscall movel %sp@(PT_OFF_ORIG_D0),%d0 cmpl #NR_syscalls,%d0 jcs syscall + jra ret_from_syscall badsys: movel #-ENOSYS,%sp@(PT_OFF_D0) jra ret_from_syscall
From: Lorenzo Bianconi lorenzo@kernel.org
[ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ]
Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid possible memory leak at module unload.
Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/dma.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c index f01b455783b23..7991705e9d134 100644 --- a/drivers/net/wireless/mediatek/mt76/dma.c +++ b/drivers/net/wireless/mediatek/mt76/dma.c @@ -476,6 +476,7 @@ mt76_dma_rx_cleanup(struct mt76_dev *dev, struct mt76_queue *q) bool more;
spin_lock_bh(&q->lock); + do { buf = mt76_dma_dequeue(dev, q, true, NULL, NULL, &more); if (!buf) @@ -483,6 +484,12 @@ mt76_dma_rx_cleanup(struct mt76_dev *dev, struct mt76_queue *q)
skb_free_frag(buf); } while (1); + + if (q->rx_head) { + dev_kfree_skb(q->rx_head); + q->rx_head = NULL; + } + spin_unlock_bh(&q->lock);
if (!q->rx_page.va) @@ -505,12 +512,6 @@ mt76_dma_rx_reset(struct mt76_dev *dev, enum mt76_rxq_id qid) mt76_dma_rx_cleanup(dev, q); mt76_dma_sync_idx(dev, q); mt76_dma_rx_fill(dev, q); - - if (!q->rx_head) - return; - - dev_kfree_skb(q->rx_head); - q->rx_head = NULL; }
static void
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 2d11eae42d52a131f06061015e49dc0f085c5bfc ]
Multiple Ideapad Z570 variants need acpi_backlight=native to force native use on these pre Windows 8 machines since acpi_video backlight control does not work here.
The original DMI quirk matches on a product_name of "102434U" but other variants may have different product_name-s such as e.g. "1024D9U".
Move to checking product_version instead as is more or less standard for Lenovo DMI quirks for similar reasons.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/video_detect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index b13713199ad94..038542b3a80a7 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -313,7 +313,7 @@ static const struct dmi_system_id video_detect_dmi_table[] = { .ident = "Lenovo Ideapad Z570", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "102434U"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Ideapad Z570"), }, }, {
From: Shay Drory shayd@nvidia.com
[ Upstream commit 988c2352273997a242f15c4fc3711773515006a2 ]
The debug message specify tdsn, but takes as an argument the tmsn. The correct argument is tmsn, hence, fix the print.
Signed-off-by: Shay Drory shayd@nvidia.com Reviewed-by: Moshe Shemesh moshe@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c index 40d7bfca37499..0a011a41c039e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c @@ -603,7 +603,7 @@ static int mlx5_tracer_handle_string_trace(struct mlx5_fw_tracer *tracer, } else { cur_string = mlx5_tracer_message_get(tracer, tracer_event); if (!cur_string) { - pr_debug("%s Got string event for unknown string tdsm: %d\n", + pr_debug("%s Got string event for unknown string tmsn: %d\n", __func__, tracer_event->string_event.tmsn); return -1; }
From: Kees Cook keescook@chromium.org
[ Upstream commit 48df133578c70185a95a49390d42df1996ddba2a ]
GCC does not like having a partially allocated object, since it cannot reason about it for bounds checking when it is passed to other code. Instead, fully allocate sig_inputArgs. (Alternatively, sig_inputArgs should be defined as a struct coda_in_hdr, if it is actually not using any other part of the union.) Seen under GCC 13:
../fs/coda/upcall.c: In function 'coda_upcall': ../fs/coda/upcall.c:801:22: warning: array subscript 'union inputArgs[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds=] 801 | sig_inputArgs->ih.opcode = CODA_SIGNAL; | ^~
Cc: Jan Harkes jaharkes@cs.cmu.edu Cc: coda@cs.cmu.edu Cc: codalist@coda.cs.cmu.edu Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20230127223921.never.882-kees@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/coda/upcall.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c index eb3b1898da462..610484c90260b 100644 --- a/fs/coda/upcall.c +++ b/fs/coda/upcall.c @@ -790,7 +790,7 @@ static int coda_upcall(struct venus_comm *vcp, sig_req = kmalloc(sizeof(struct upc_req), GFP_KERNEL); if (!sig_req) goto exit;
- sig_inputArgs = kvzalloc(sizeof(struct coda_in_hdr), GFP_KERNEL); + sig_inputArgs = kvzalloc(sizeof(*sig_inputArgs), GFP_KERNEL); if (!sig_inputArgs) { kfree(sig_req); goto exit;
From: Kees Cook keescook@chromium.org
[ Upstream commit 04ffde1319a715bd0550ded3580d4ea3bc003776 ]
While there is logic about the difference between ksize and usize, copy_struct_from_user() didn't check the size of the destination buffer (when it was known) against ksize. Add this check so there is an upper bounds check on the possible memset() call, otherwise lower bounds checks made by callers will trigger bounds warnings under -Warray-bounds. Seen under GCC 13:
In function 'copy_struct_from_user', inlined from 'iommufd_fops_ioctl' at ../drivers/iommu/iommufd/main.c:333:8: ../include/linux/fortify-string.h:59:33: warning: '__builtin_memset' offset [57, 4294967294] is out of the bounds [0, 56] of object 'buf' with type 'union ucmd_buffer' [-Warray-bounds=] 59 | #define __underlying_memset __builtin_memset | ^ ../include/linux/fortify-string.h:453:9: note: in expansion of macro '__underlying_memset' 453 | __underlying_memset(p, c, __fortify_size); \ | ^~~~~~~~~~~~~~~~~~~ ../include/linux/fortify-string.h:461:25: note: in expansion of macro '__fortify_memset_chk' 461 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \ | ^~~~~~~~~~~~~~~~~~~~ ../include/linux/uaccess.h:334:17: note: in expansion of macro 'memset' 334 | memset(dst + size, 0, rest); | ^~~~~~ ../drivers/iommu/iommufd/main.c: In function 'iommufd_fops_ioctl': ../drivers/iommu/iommufd/main.c:311:27: note: 'buf' declared here 311 | union ucmd_buffer buf; | ^~~
Cc: Christian Brauner brauner@kernel.org Cc: Rasmus Villemoes linux@rasmusvillemoes.dk Cc: Arnd Bergmann arnd@arndb.de Cc: Dinh Nguyen dinguyen@kernel.org Cc: Catalin Marinas catalin.marinas@arm.com Cc: Andrew Morton akpm@linux-foundation.org Cc: Geert Uytterhoeven geert@linux-m68k.org Cc: Alexander Potapenko glider@google.com Acked-by: Aleksa Sarai cyphar@cyphar.com Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/lkml/20230203193523.never.667-kees@kernel.org/ Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/uaccess.h | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h index c7c6e8b8344d4..20668760daa02 100644 --- a/include/linux/uaccess.h +++ b/include/linux/uaccess.h @@ -348,6 +348,10 @@ copy_struct_from_user(void *dst, size_t ksize, const void __user *src, size_t size = min(ksize, usize); size_t rest = max(ksize, usize) - size;
+ /* Double check if ksize is larger than a known object size. */ + if (WARN_ON_ONCE(ksize > __builtin_object_size(dst, 1))) + return -E2BIG; + /* Deal with trailing bytes. */ if (usize < ksize) { memset(dst + size, 0, rest);
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
[ Upstream commit a0e8c13ccd6a9a636d27353da62c2410c4eca337 ]
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/power/energy_model.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c index 119b929dcff0f..334173fe6940e 100644 --- a/kernel/power/energy_model.c +++ b/kernel/power/energy_model.c @@ -72,10 +72,7 @@ static void em_debug_create_pd(struct device *dev)
static void em_debug_remove_pd(struct device *dev) { - struct dentry *debug_dir; - - debug_dir = debugfs_lookup(dev_name(dev), rootdir); - debugfs_remove_recursive(debug_dir); + debugfs_lookup_and_remove(dev_name(dev), rootdir); }
static int __init em_debug_init(void)
From: Moises Cardona moisesmcardona@gmail.com
[ Upstream commit 1eec3b95b5ce7fb2cdd273ac4f8b24b1ed6776a1 ]
This patch adds VID:PID 13d3:3529 to the btusb.c file.
This VID:PID is found in the Realtek RTL8821CE module (M.2 module AW-CB304NF on an ASUS E210MA laptop)
Output of /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3529 Rev= 1.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Moises Cardona moisesmcardona@gmail.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3d905fda9b29a..2695ece47eb0e 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -393,6 +393,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE },
+ /* Realtek 8821CE Bluetooth devices */ + { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Realtek 8822CE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH },
From: Moshe Shemesh moshe@nvidia.com
[ Upstream commit bfd4e6a5dbbc12f77620602e764ac940ccb159de ]
devlink_nl_health_reporter_fill() error flow calls nla_nest_end(). Fix it to call nla_nest_cancel() instead.
Note the bug is harmless as genlmsg_cancel() cancel the entire message, so no fixes tag added.
Signed-off-by: Moshe Shemesh moshe@nvidia.com Reviewed-by: Jiri Pirko jiri@nvidia.com Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/devlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/devlink.c b/net/core/devlink.c index 72047750dcd96..4fccd27a6082e 100644 --- a/net/core/devlink.c +++ b/net/core/devlink.c @@ -6093,7 +6093,7 @@ devlink_nl_health_reporter_fill(struct sk_buff *msg, return 0;
reporter_nest_cancel: - nla_nest_end(msg, reporter_attr); + nla_nest_cancel(msg, reporter_attr); genlmsg_cancel: genlmsg_cancel(msg, hdr); return -EMSGSIZE;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin