Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed

Fixes: a052865fe2871a3888 (aacraid: Set correct Queue Depth for HBA1000 RAW disks)

Signed-off-by: Sagar Biradar Sagar.Biradar@microchip.com Reviewed-by: Dave Carroll david.carroll@microsemi.com --- drivers/scsi/aacraid/linit.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 7e56a11..cceffac 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -413,13 +413,16 @@ static int aac_slave_configure(struct scsi_device *sdev) if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) { devtype = aac->hba_map[chn][tid].devtype;

- if (devtype == AAC_DEVTYPE_NATIVE_RAW) + if (devtype == AAC_DEVTYPE_NATIVE_RAW) { depth = aac->hba_map[chn][tid].qd_limit; - else if (devtype == AAC_DEVTYPE_ARC_RAW) + set_timeout = 1; + goto common_config; + } + if (devtype == AAC_DEVTYPE_ARC_RAW) { set_qd_dev_type = true; - - set_timeout = 1; - goto common_config; + set_timeout = 1; + goto common_config; + } }

if (aac->jbod && (sdev->type == TYPE_DISK))