Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C.
This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate.
Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint.
Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan jian-hong@endlessm.com Reported-by: Chris Chiu chiu@endlessm.com Reported-by: Daniel Drake drake@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com --- Hi Jian-Hong, Chris and Daniel. Could you test does this fix your touchpad issue? --- drivers/mfd/intel-lpss-pci.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index d1c46de89eb4..d9ae983095c5 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -124,6 +124,11 @@ static const struct intel_lpss_platform_info apl_i2c_info = { .properties = apl_i2c_properties, };
+static const struct intel_lpss_platform_info cnl_i2c_info = { + .clk_rate = 216000000, + .properties = spt_i2c_properties, +}; + static const struct pci_device_id intel_lpss_pci_ids[] = { /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, @@ -207,13 +212,13 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x9daa), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0x9dab), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0x9dfb), (kernel_ulong_t)&spt_info }, - { PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&cnl_i2c_info }, { PCI_VDEVICE(INTEL, 0x9dc7), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0x9de8), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9de8), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&cnl_i2c_info }, /* SPT-H */ { PCI_VDEVICE(INTEL, 0xa127), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa128), (kernel_ulong_t)&spt_uart_info }, @@ -240,10 +245,10 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0xa32b), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0xa347), (kernel_ulong_t)&spt_uart_info }, - { PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&spt_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info }, { } }; MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
On Fri, May 18, 2018 at 11:38:27AM +0300, Jarkko Nikula wrote:
Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C.
This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate.
Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint.
Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan jian-hong@endlessm.com Reported-by: Chris Chiu chiu@endlessm.com Reported-by: Daniel Drake drake@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com
Acked-by: Mika Westerberg mika.westerberg@linux.intel.com
Hi Jarkko,
We have tried this patch on the two laptops we have now:
ASUS X580GD
dev@endless:~$ lscpu | grep "Model name" Model name: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz dev@endless:~$ lspci | grep -E '(a36[89ab]|97c[56])' 00:15.0 Serial bus controller [0c80]: Intel Corporation Device a368 (rev 10) 00:15.1 Serial bus controller [0c80]: Intel Corporation Device a369 (rev 10) dev@endless:~$ dmesg | grep -E 'lpss|i2c' [ 9.692511] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 9.697702] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 9.920034] input: ELAN1200:00 04F3:303E Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-ELAN1200:00/0018:04F3:303E.0001/input/input18 [ 9.920204] hid-multitouch 0018:04F3:303E.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:303E] on i2c-ELAN1200:00 [ 9.923873] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002) [ 9.924806] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
ASUS UX550GE
dev@endless:~$ lscpu | grep "Model name" Model name: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz dev@endless:~$ lspci | grep -E '(a36[89ab]|97c[56])' 00:15.0 Serial bus controller [0c80]: Intel Corporation Device a368 (rev 10) 00:15.1 Serial bus controller [0c80]: Intel Corporation Device a369 (rev 10) dev@endless:~$ dmesg | grep -E 'lpss|i2c' [ 6.926801] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 6.940907] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 6.971915] input: FTE1200:00 0B05:0201 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-FTE1200:00/0018:0B05:0201.0002/input/input21 [ 6.971961] hid-multitouch 0018:0B05:0201.0002: input,hidraw1: I2C HID v1.00 Mouse [FTE1200:00 0B05:0201] on i2c-FTE1200:00 [ 6.973930] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002) [ 6.974700] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
The patch works on both of the laptops with the touchpads.
2018-05-18 18:46 GMT+08:00 Mika Westerberg mika.westerberg@linux.intel.com:
On Fri, May 18, 2018 at 11:38:27AM +0300, Jarkko Nikula wrote:
Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C.
This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate.
Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint.
Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan jian-hong@endlessm.com Reported-by: Chris Chiu chiu@endlessm.com Reported-by: Daniel Drake drake@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com
Acked-by: Mika Westerberg mika.westerberg@linux.intel.com
Tested-by: Jian-Hong Pan jian-hong@endlessm.com
On Fri, 2018-05-18 at 11:38 +0300, Jarkko Nikula wrote:
Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C.
This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate.
Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint.
Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com
P.S. Documentation we have is not perfect, that's why previously I though about Broxton/Cannonlake case as single, which is wrong, they are different in terms of i2c clock organization.
Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan jian-hong@endlessm.com Reported-by: Chris Chiu chiu@endlessm.com Reported-by: Daniel Drake drake@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com
Hi Jian-Hong, Chris and Daniel. Could you test does this fix your touchpad issue?
drivers/mfd/intel-lpss-pci.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss- pci.c index d1c46de89eb4..d9ae983095c5 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -124,6 +124,11 @@ static const struct intel_lpss_platform_info apl_i2c_info = { .properties = apl_i2c_properties, }; +static const struct intel_lpss_platform_info cnl_i2c_info = {
- .clk_rate = 216000000,
- .properties = spt_i2c_properties,
+};
static const struct pci_device_id intel_lpss_pci_ids[] = { /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, @@ -207,13 +212,13 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x9daa), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0x9dab), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0x9dfb), (kernel_ulong_t)&spt_info },
- { PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&cnl_i2c_info
}, { PCI_VDEVICE(INTEL, 0x9dc7), (kernel_ulong_t)&spt_uart_info },
- { PCI_VDEVICE(INTEL, 0x9de8), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9de8), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&cnl_i2c_info
}, /* SPT-H */ { PCI_VDEVICE(INTEL, 0xa127), (kernel_ulong_t)&spt_uart_info }, { PCI_VDEVICE(INTEL, 0xa128), (kernel_ulong_t)&spt_uart_info }, @@ -240,10 +245,10 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0xa32b), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info }, { PCI_VDEVICE(INTEL, 0xa347), (kernel_ulong_t)&spt_uart_info },
- { PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&spt_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info
},
- { PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info
}, { } }; MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
On Fri, 18 May 2018, Jarkko Nikula wrote:
Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C.
This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate.
Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint.
Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan jian-hong@endlessm.com Reported-by: Chris Chiu chiu@endlessm.com Reported-by: Daniel Drake drake@endlessm.com Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com
Hi Jian-Hong, Chris and Daniel. Could you test does this fix your touchpad issue?
drivers/mfd/intel-lpss-pci.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
Applied, thanks.
linux-stable-mirror@lists.linaro.org
-
Andy Shevchenko -
Jarkko Nikula -
Jian-Hong Pan -
Lee Jones -
Mika Westerberg