From: Martin Wilck martin.wilck@suse.com
[ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ]
When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults.
Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying.
[mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.]
[1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEo...
Co-developed-by: Rajashekhar M A rajs@netapp.com Co-developed-by: Hannes Reinecke hare@suse.de Signed-off-by: Hannes Reinecke hare@suse.de Signed-off-by: Martin Wilck martin.wilck@suse.com Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Mike Christie michael.christie@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 0781f991e7845..f5fc8631883d5 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -406,28 +406,40 @@ static char print_alua_state(unsigned char state) } }
-static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg;
+ rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -494,7 +506,8 @@ static int alua_tur(struct scsi_device *sdev)
retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval)
From: Justin Stitt justinstitt@google.com
[ Upstream commit 9fad9d560af5c654bb38e0b07ee54a4e9acdc5cd ]
Running syzkaller with the newly reintroduced signed integer overflow sanitizer produces this report:
[ 65.194362] ------------[ cut here ]------------ [ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9 [ 65.203607] -2147483648 * 177 cannot be represented in type 'int' [ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 65.219923] Call Trace: [ 65.221556] <TASK> [ 65.223029] dump_stack_lvl+0x93/0xd0 [ 65.225573] handle_overflow+0x171/0x1b0 [ 65.228219] sr_select_speed+0xeb/0xf0 [ 65.230786] ? __pm_runtime_resume+0xe6/0x130 [ 65.233606] sr_block_ioctl+0x15d/0x1d0 ...
Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer").
Firstly, let's change the type of "speed" to unsigned long as sr_select_speed()'s only caller passes in an unsigned long anyways.
$ git grep '.select_speed' | drivers/scsi/sr.c: .select_speed = sr_select_speed, ... | static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi, | unsigned long arg) | { | ... | return cdi->ops->select_speed(cdi, arg); | }
Next, let's add an extra check to make sure we don't exceed 0xffff/177 (350) since 0xffff is the max speed. This has two benefits: 1) we deal with integer overflow before it happens and 2) we properly respect the max speed of 0xffff. There are some "magic" numbers here but I did not want to change more than what was necessary.
Link: https://github.com/llvm/llvm-project/pull/82432 [1] Closes: https://github.com/KSPP/linux/issues/357 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt justinstitt@google.com Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f7242... Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/cdrom/cdrom-standard.rst | 4 ++-- drivers/scsi/sr.h | 2 +- drivers/scsi/sr_ioctl.c | 5 ++++- include/linux/cdrom.h | 2 +- 4 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/Documentation/cdrom/cdrom-standard.rst b/Documentation/cdrom/cdrom-standard.rst index 7964fe134277b..6c1303cff159e 100644 --- a/Documentation/cdrom/cdrom-standard.rst +++ b/Documentation/cdrom/cdrom-standard.rst @@ -217,7 +217,7 @@ current *struct* is:: int (*media_changed)(struct cdrom_device_info *, int); int (*tray_move)(struct cdrom_device_info *, int); int (*lock_door)(struct cdrom_device_info *, int); - int (*select_speed)(struct cdrom_device_info *, int); + int (*select_speed)(struct cdrom_device_info *, unsigned long); int (*get_last_session) (struct cdrom_device_info *, struct cdrom_multisession *); int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *); @@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
::
- int select_speed(struct cdrom_device_info *cdi, int speed) + int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
Some CD-ROM drives are capable of changing their head-speed. There are several reasons for changing the speed of a CD-ROM drive. Badly diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index 1175f2e213b56..dc899277b3a44 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -65,7 +65,7 @@ int sr_disk_status(struct cdrom_device_info *); int sr_get_last_session(struct cdrom_device_info *, struct cdrom_multisession *); int sr_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *); int sr_reset(struct cdrom_device_info *); -int sr_select_speed(struct cdrom_device_info *cdi, int speed); +int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed); int sr_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
int sr_is_xa(Scsi_CD *); diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index fbdb5124d7f7d..7034b4126d421 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -422,11 +422,14 @@ int sr_reset(struct cdrom_device_info *cdi) return 0; }
-int sr_select_speed(struct cdrom_device_info *cdi, int speed) +int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed) { Scsi_CD *cd = cdi->handle; struct packet_command cgc;
+ /* avoid exceeding the max speed or overflowing integer bounds */ + speed = clamp(0, speed, 0xffff / 177); + if (speed == 0) speed = 0xffff; /* set to max */ else diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 67caa909e3e61..24fe410492006 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -76,7 +76,7 @@ struct cdrom_device_ops { unsigned int clearing, int slot); int (*tray_move) (struct cdrom_device_info *, int); int (*lock_door) (struct cdrom_device_info *, int); - int (*select_speed) (struct cdrom_device_info *, int); + int (*select_speed) (struct cdrom_device_info *, unsigned long); int (*get_last_session) (struct cdrom_device_info *, struct cdrom_multisession *); int (*get_mcn) (struct cdrom_device_info *,
From: Saurav Kashyap skashyap@marvell.com
[ Upstream commit 51071f0831ea975fc045526dd7e17efe669dc6e1 ]
Stag work can cause issues during unload and recovery, hence don't process it.
Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index d969b0dc97326..27f4028bff3bf 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -4001,6 +4001,22 @@ void qedf_stag_change_work(struct work_struct *work) struct qedf_ctx *qedf = container_of(work, struct qedf_ctx, stag_work.work);
+ if (!qedf) { + QEDF_ERR(&qedf->dbg_ctx, "qedf is NULL"); + return; + } + + if (test_bit(QEDF_IN_RECOVERY, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, + "Already is in recovery, hence not calling software context reset.\n"); + return; + } + + if (test_bit(QEDF_UNLOADING, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n"); + return; + } + printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.", dev_name(&qedf->pdev->dev), __func__, __LINE__, qedf->dbg_ctx.host_no);
From: Saurav Kashyap skashyap@marvell.com
[ Upstream commit 78e88472b60936025b83eba57cffa59d3501dc07 ]
If stag work is already scheduled and unload is called, it can lead to issues as unload cleans up the work element. Wait for stag work to get completed before cleanup during unload.
Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 30 +++++++++++++++++++++++++++--- 2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h index c5c0bbdafc4ea..81b84757faae0 100644 --- a/drivers/scsi/qedf/qedf.h +++ b/drivers/scsi/qedf/qedf.h @@ -362,6 +362,7 @@ struct qedf_ctx { #define QEDF_IN_RECOVERY 5 #define QEDF_DBG_STOP_IO 6 #define QEDF_PROBING 8 +#define QEDF_STAG_IN_PROGRESS 9 unsigned long flags; /* Miscellaneous state flags */ int fipvlan_retries; u8 num_queues; diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 27f4028bff3bf..524807f9f4eb1 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -318,11 +318,18 @@ static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did, */ if (resp == fc_lport_flogi_resp) { qedf->flogi_cnt++; + qedf->flogi_pending++; + + if (test_bit(QEDF_UNLOADING, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n"); + qedf->flogi_pending = 0; + } + if (qedf->flogi_pending >= QEDF_FLOGI_RETRY_CNT) { schedule_delayed_work(&qedf->stag_work, 2); return NULL; } - qedf->flogi_pending++; + return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp, arg, timeout); } @@ -911,13 +918,14 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) struct qedf_ctx *qedf; struct qed_link_output if_link;
+ qedf = lport_priv(lport); + if (lport->vport) { + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); printk_ratelimited("Cannot issue host reset on NPIV port.\n"); return; }
- qedf = lport_priv(lport); - qedf->flogi_pending = 0; /* For host reset, essentially do a soft link up/down */ atomic_set(&qedf->link_state, QEDF_LINK_DOWN); @@ -937,6 +945,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) if (!if_link.link_up) { QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Physical link is not up.\n"); + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); return; } /* Flush and wait to make sure link down is processed */ @@ -949,6 +958,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) "Queue link up work.\n"); queue_delayed_work(qedf->link_update_wq, &qedf->link_update, 0); + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); }
/* Reset the host by gracefully logging out and then logging back in */ @@ -3725,6 +3735,7 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) { struct qedf_ctx *qedf; int rc; + int cnt = 0;
if (!pdev) { QEDF_ERR(NULL, "pdev is NULL.\n"); @@ -3742,6 +3753,17 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) return; }
+stag_in_prog: + if (test_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Stag in progress, cnt=%d.\n", cnt); + cnt++; + + if (cnt < 5) { + msleep(500); + goto stag_in_prog; + } + } + if (mode != QEDF_MODE_RECOVERY) set_bit(QEDF_UNLOADING, &qedf->flags);
@@ -4017,6 +4039,8 @@ void qedf_stag_change_work(struct work_struct *work) return; }
+ set_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); + printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.", dev_name(&qedf->pdev->dev), __func__, __LINE__, qedf->dbg_ctx.host_no);
From: Saurav Kashyap skashyap@marvell.com
[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ]
Zero qed_slowpath_params before use.
Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 524807f9f4eb1..179967774cc8c 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3477,6 +3477,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) }
/* Start the Slowpath-process */ + memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params)); slowpath_params.int_mode = QED_INT_MODE_MSIX; slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER;
From: Nathan Chancellor nathan@kernel.org
[ Upstream commit 5134acb15d9ef27aa2b90aad46d4e89fcef79fdc ]
When building ARCH=loongarch defconfig + CONFIG_UNWINDER_ORC=y using LLVM, there is a warning from ld.lld when linking the EFI zboot image due to the use of unreachable() in number() in vsprintf.c:
ld.lld: warning: drivers/firmware/efi/libstub/lib.a(vsprintf.stub.o):(.discard.unreachable+0x0): has non-ABS relocation R_LARCH_32_PCREL against symbol ''
If the compiler cannot eliminate the default case for any reason, the .discard.unreachable section will remain in the final binary but the entire point of any section prefixed with .discard is that it is only used at compile time, so it can be discarded via /DISCARD/ in a linker script. The asm-generic vmlinux.lds.h includes .discard and .discard.* in the COMMON_DISCARDS macro but that is not used for zboot.lds, as it is not a kernel image linker script.
Add .discard and .discard.* to /DISCARD/ in zboot.lds, so that any sections meant to be discarded at link time are not included in the final zboot image. This issue is not specific to LoongArch, it is just the first architecture to select CONFIG_OBJTOOL, which defines annotate_unreachable() as an asm statement to add the .discard.unreachable section, and use the EFI stub.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2023 Signed-off-by: Nathan Chancellor nathan@kernel.org Acked-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/libstub/zboot.lds | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/efi/libstub/zboot.lds b/drivers/firmware/efi/libstub/zboot.lds index 93d33f68333b2..a7fffbad6d46a 100644 --- a/drivers/firmware/efi/libstub/zboot.lds +++ b/drivers/firmware/efi/libstub/zboot.lds @@ -34,6 +34,7 @@ SECTIONS }
/DISCARD/ : { + *(.discard .discard.*) *(.modinfo .init.modinfo) } }
From: "Guilherme G. Piccoli" gpiccoli@igalia.com
[ Upstream commit 7c23b186ab892088f76a3ad9dbff1685ffe2e832 ]
Right now efi-pstore either returns 0 (success) or -EIO; but we do have a function to convert UEFI errors in different standard error codes, helping to narrow down potential issues more accurately.
So, let's use this helper here.
Signed-off-by: Guilherme G. Piccoli gpiccoli@igalia.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/efi-pstore.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 3bddc152fcd43..8b2a9fc436a3f 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -107,7 +107,7 @@ static int efi_pstore_read_func(struct pstore_record *record, &size, record->buf); if (status != EFI_SUCCESS) { kfree(record->buf); - return -EIO; + return efi_status_to_err(status); }
/* @@ -152,7 +152,7 @@ static ssize_t efi_pstore_read(struct pstore_record *record) return 0;
if (status != EFI_SUCCESS) - return -EIO; + return efi_status_to_err(status);
/* skip variables that don't concern us */ if (efi_guidcmp(guid, LINUX_EFI_CRASH_GUID)) @@ -190,7 +190,7 @@ static int efi_pstore_write(struct pstore_record *record) record->size, record->psi->buf, true); efivar_unlock(); - return status == EFI_SUCCESS ? 0 : -EIO; + return efi_status_to_err(status); };
static int efi_pstore_erase(struct pstore_record *record) @@ -201,7 +201,7 @@ static int efi_pstore_erase(struct pstore_record *record) PSTORE_EFI_ATTRIBUTES, 0, NULL);
if (status != EFI_SUCCESS && status != EFI_NOT_FOUND) - return -EIO; + return efi_status_to_err(status); return 0; }
Hi!
[ Upstream commit 7c23b186ab892088f76a3ad9dbff1685ffe2e832 ]
Right now efi-pstore either returns 0 (success) or -EIO; but we do have a function to convert UEFI errors in different standard error codes, helping to narrow down potential issues more accurately.
So, let's use this helper here.
I don't believe we need this in stable.
Best regards, Pavel
From: Armin Wolf W_Armin@gmx.de
[ Upstream commit f6f172dc6a6d7775b2df6adfd1350700e9a847ec ]
When a multi-byte address space access is requested, acpi_ec_read()/ acpi_ec_write() is being called multiple times.
Abort such operations if a single call to acpi_ec_read() / acpi_ec_write() fails, as the data read from / written to the EC might be incomplete.
Signed-off-by: Armin Wolf W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/ec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 77d1f2cb89ef3..fc3dc83bb8707 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1314,10 +1314,13 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (ec->busy_polling || bits > 8) acpi_ec_burst_enable(ec);
- for (i = 0; i < bytes; ++i, ++address, ++value) + for (i = 0; i < bytes; ++i, ++address, ++value) { result = (function == ACPI_READ) ? acpi_ec_read(ec, address, value) : acpi_ec_write(ec, address, *value); + if (result < 0) + break; + }
if (ec->busy_polling || bits > 8) acpi_ec_burst_disable(ec);
From: Armin Wolf W_Armin@gmx.de
[ Upstream commit c4bd7f1d78340e63de4d073fd3dbe5391e2996e5 ]
If an error code other than EINVAL, ENODEV or ETIME is returned by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly returned by acpi_ec_space_handler().
Fix this by only returning AE_OK on success, and return AE_ERROR otherwise.
Signed-off-by: Armin Wolf W_Armin@gmx.de [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/ec.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fc3dc83bb8707..7589908b358e3 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1332,8 +1332,10 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, return AE_NOT_FOUND; case -ETIME: return AE_TIME; - default: + case 0: return AE_OK; + default: + return AE_ERROR; } }
From: Dhananjay Ugwekar Dhananjay.Ugwekar@amd.com
[ Upstream commit 43cad521c6d228ea0c51e248f8e5b3a6295a2849 ]
Update cpupower's P-State frequency calculation and reporting with AMD Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan Ananth.Narayan@amd.com Signed-off-by: Dhananjay Ugwekar Dhananjay.Ugwekar@amd.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/power/cpupower/utils/helpers/amd.c | 26 +++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c index c519cc89c97f4..0a56e22240fc8 100644 --- a/tools/power/cpupower/utils/helpers/amd.c +++ b/tools/power/cpupower/utils/helpers/amd.c @@ -41,6 +41,16 @@ union core_pstate { unsigned res1:31; unsigned en:1; } pstatedef; + /* since fam 1Ah: */ + struct { + unsigned fid:12; + unsigned res1:2; + unsigned vid:8; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res2:31; + unsigned en:1; + } pstatedef2; unsigned long long val; };
@@ -48,6 +58,10 @@ static int get_did(union core_pstate pstate) { int t;
+ /* Fam 1Ah onward do not use did */ + if (cpupower_cpu_info.family >= 0x1A) + return 0; + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) t = pstate.pstatedef.did; else if (cpupower_cpu_info.family == 0x12) @@ -61,12 +75,18 @@ static int get_did(union core_pstate pstate) static int get_cof(union core_pstate pstate) { int t; - int fid, did, cof; + int fid, did, cof = 0;
did = get_did(pstate); if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) { - fid = pstate.pstatedef.fid; - cof = 200 * fid / did; + if (cpupower_cpu_info.family >= 0x1A) { + fid = pstate.pstatedef2.fid; + if (fid > 0x0f) + cof = (fid * 5); + } else { + fid = pstate.pstatedef.fid; + cof = 200 * fid / did; + } } else { t = 0x10; fid = pstate.pstate.fid;
From: Nicolas Escande nico.escande@gmail.com
[ Upstream commit 6f6291f09a322c1c1578badac8072d049363f4e6 ]
With a ath9k device I can see that: iw phy phy0 interface add mesh0 type mp ip link set mesh0 up iw dev mesh0 scan
Will start a scan with the Power Management bit set in the Frame Control Field. This is because we set this bit depending on the nonpeer_pm variable of the mesh iface sdata and when there are no active links on the interface it remains to NL80211_MESH_POWER_UNKNOWN.
As soon as links starts to be established, it wil switch to NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta nonpeer_pm field. As we want no power save by default, (as expressed with the per sta ini values), lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.
Also please note that we cannot change the default value from userspace prior to establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.
Signed-off-by: Nicolas Escande nico.escande@gmail.com Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mesh.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 5a99b8f6e465f..9c9b47d153c28 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -1625,6 +1625,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) ifmsh->last_preq = jiffies; ifmsh->next_perr = jiffies; ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; + ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; /* Allocate all mesh structures when creating the first mesh interface. */ if (!mesh_allocated) ieee80211s_init();
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 02c665f048a439c0d58cc45334c94634bd7c18e6 ]
If the interface isn't enabled, don't apply multicast rate changes immediately.
Reported-by: syzbot+de87c09cc7b964ea2e23@syzkaller.appspotmail.com Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa794... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/cfg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 1e57027da2913..2c60fc165801c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2838,8 +2838,9 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, memcpy(sdata->vif.bss_conf.mcast_rate, rate, sizeof(int) * NUM_NL80211_BANDS);
- ieee80211_link_info_change_notify(sdata, &sdata->deflink, - BSS_CHANGED_MCAST_RATE); + if (ieee80211_sdata_running(sdata)) + ieee80211_link_info_change_notify(sdata, &sdata->deflink, + BSS_CHANGED_MCAST_RATE);
return 0; }
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 177c6ae9725d783f9e96f02593ce8fb2639be22f ]
The code itself doesn't want to handle frames from the driver if it's already stopped, but if the tasklet was queued before and runs after the stop, then all bets are off. Flush queues before actually stopping, RX should be off at this point since all the interfaces are removed already, etc.
Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/main.c | 10 ++++++++-- net/mac80211/util.c | 2 ++ 3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3e14d5c9aa1b4..0d8a9bb925384 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1782,6 +1782,8 @@ void ieee80211_link_info_change_notify(struct ieee80211_sub_if_data *sdata, void ieee80211_configure_filter(struct ieee80211_local *local); u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
+void ieee80211_handle_queued_frames(struct ieee80211_local *local); + u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local); int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb, u64 *cookie, gfp_t gfp); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 6faba47b7b0ea..89771f0e0ae70 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -300,9 +300,8 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) BSS_CHANGED_ERP_SLOT; }
-static void ieee80211_tasklet_handler(struct tasklet_struct *t) +void ieee80211_handle_queued_frames(struct ieee80211_local *local) { - struct ieee80211_local *local = from_tasklet(local, t, tasklet); struct sk_buff *skb;
while ((skb = skb_dequeue(&local->skb_queue)) || @@ -327,6 +326,13 @@ static void ieee80211_tasklet_handler(struct tasklet_struct *t) } }
+static void ieee80211_tasklet_handler(struct tasklet_struct *t) +{ + struct ieee80211_local *local = from_tasklet(local, t, tasklet); + + ieee80211_handle_queued_frames(local); +} + static void ieee80211_restart_work(struct work_struct *work) { struct ieee80211_local *local = diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1088d90e355ba..08e6691cdc4a4 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2207,6 +2207,8 @@ u32 ieee80211_sta_get_rates(struct ieee80211_sub_if_data *sdata,
void ieee80211_stop_device(struct ieee80211_local *local) { + ieee80211_handle_queued_frames(local); + ieee80211_led_radio(local, false); ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit f7a8b10bfd614d7a9a16fbe80d28ead4f063cb00 ]
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way:
[base struct][channels][ssids][6ghz_params]
It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be.
However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set:
[base struct][channels] ^ scan_6ghz_params
and later the SSID pointer is set to the end of the actually _used_ channels.
[base struct][channels] ^ ssids
If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters.
Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing.
Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though.
Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request.
Co-developed-by: Miri Korenblit miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Reviewed-by: Ilan Peer ilan.peer@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/rdev-ops.h | 6 +++++- net/wireless/scan.c | 47 +++++++++++++++++++++++++++-------------- 2 files changed, 36 insertions(+), 17 deletions(-)
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index ee853a14a02de..5f210686c4110 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -2,7 +2,7 @@ /* * Portions of this file * Copyright(c) 2016-2017 Intel Deutschland GmbH - * Copyright (C) 2018, 2021-2023 Intel Corporation + * Copyright (C) 2018, 2021-2024 Intel Corporation */ #ifndef __CFG80211_RDEV_OPS #define __CFG80211_RDEV_OPS @@ -446,6 +446,10 @@ static inline int rdev_scan(struct cfg80211_registered_device *rdev, struct cfg80211_scan_request *request) { int ret; + + if (WARN_ON_ONCE(!request->n_ssids && request->ssids)) + return -EINVAL; + trace_rdev_scan(&rdev->wiphy, request); ret = rdev->ops->scan(&rdev->wiphy, request); trace_rdev_return_int(&rdev->wiphy, ret); diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 3ad4c1032c038..ee4ef32f39b37 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -778,6 +778,7 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev) LIST_HEAD(coloc_ap_list); bool need_scan_psc = true; const struct ieee80211_sband_iftype_data *iftd; + size_t size, offs_ssids, offs_6ghz_params, offs_ies;
rdev_req->scan_6ghz = true;
@@ -806,10 +807,15 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev) spin_unlock_bh(&rdev->bss_lock); }
- request = kzalloc(struct_size(request, channels, n_channels) + - sizeof(*request->scan_6ghz_params) * count + - sizeof(*request->ssids) * rdev_req->n_ssids, - GFP_KERNEL); + size = struct_size(request, channels, n_channels); + offs_ssids = size; + size += sizeof(*request->ssids) * rdev_req->n_ssids; + offs_6ghz_params = size; + size += sizeof(*request->scan_6ghz_params) * count; + offs_ies = size; + size += rdev_req->ie_len; + + request = kzalloc(size, GFP_KERNEL); if (!request) { cfg80211_free_coloc_ap_list(&coloc_ap_list); return -ENOMEM; @@ -817,8 +823,26 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
*request = *rdev_req; request->n_channels = 0; - request->scan_6ghz_params = - (void *)&request->channels[n_channels]; + request->n_6ghz_params = 0; + if (rdev_req->n_ssids) { + /* + * Add the ssids from the parent scan request to the new + * scan request, so the driver would be able to use them + * in its probe requests to discover hidden APs on PSC + * channels. + */ + request->ssids = (void *)request + offs_ssids; + memcpy(request->ssids, rdev_req->ssids, + sizeof(*request->ssids) * request->n_ssids); + } + request->scan_6ghz_params = (void *)request + offs_6ghz_params; + + if (rdev_req->ie_len) { + void *ie = (void *)request + offs_ies; + + memcpy(ie, rdev_req->ie, rdev_req->ie_len); + request->ie = ie; + }
/* * PSC channels should not be scanned in case of direct scan with 1 SSID @@ -906,17 +930,8 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
if (request->n_channels) { struct cfg80211_scan_request *old = rdev->int_scan_req; - rdev->int_scan_req = request;
- /* - * Add the ssids from the parent scan request to the new scan - * request, so the driver would be able to use them in its - * probe requests to discover hidden APs on PSC channels. - */ - request->ssids = (void *)&request->channels[request->n_channels]; - request->n_ssids = rdev_req->n_ssids; - memcpy(request->ssids, rdev_req->ssids, sizeof(*request->ssids) * - request->n_ssids); + rdev->int_scan_req = request;
/* * If this scan follows a previous scan, save the scan start
From: Yedidya Benshimol yedidya.ben.shimol@intel.com
[ Upstream commit b7ffca99313d856f7d1cc89038d9061b128e8e97 ]
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD.
Signed-off-by: Yedidya Benshimol yedidya.ben.shimol@intel.com Reviewed-by: Gregory Greenman gregory.greenman@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f536095935... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 88f4f429d875c..9a36ce98b5bfc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1934,7 +1934,8 @@ static bool iwl_mvm_setup_connection_keep(struct iwl_mvm *mvm,
out: if (iwl_fw_lookup_notif_ver(mvm->fw, LONG_GROUP, - WOWLAN_GET_STATUSES, 0) < 10) { + WOWLAN_GET_STATUSES, + IWL_FW_CMD_VER_UNKNOWN) < 10) { mvmvif->seqno_valid = true; /* +0x10 because the set API expects next-to-use, not last-used */ mvmvif->seqno = status->non_qos_seq_ctr + 0x10;
From: Yedidya Benshimol yedidya.ben.shimol@intel.com
[ Upstream commit 08b16d1b5997dc378533318e2a9cd73c7a898284 ]
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly.
Signed-off-by: Yedidya Benshimol yedidya.ben.shimol@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 9a36ce98b5bfc..425588605a262 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -594,16 +594,25 @@ static void iwl_mvm_wowlan_gtk_type_iter(struct ieee80211_hw *hw, void *_data) { struct wowlan_key_gtk_type_iter *data = _data; + __le32 *cipher = NULL; + + if (key->keyidx == 4 || key->keyidx == 5) + cipher = &data->kek_kck_cmd->igtk_cipher; + if (key->keyidx == 6 || key->keyidx == 7) + cipher = &data->kek_kck_cmd->bigtk_cipher;
switch (key->cipher) { default: return; case WLAN_CIPHER_SUITE_BIP_GMAC_256: case WLAN_CIPHER_SUITE_BIP_GMAC_128: - data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_GCMP); + if (cipher) + *cipher = cpu_to_le32(STA_KEY_FLG_GCMP); return; case WLAN_CIPHER_SUITE_AES_CMAC: - data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_CCM); + case WLAN_CIPHER_SUITE_BIP_CMAC_256: + if (cipher) + *cipher = cpu_to_le32(STA_KEY_FLG_CCM); return; case WLAN_CIPHER_SUITE_CCMP: if (!sta)
From: Ayala Beker ayala.beker@intel.com
[ Upstream commit 989830d1cf16bd149bf0690d889a9caef95fb5b1 ]
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses.
Signed-off-by: Ayala Beker ayala.beker@intel.com Reviewed-by: Ilan Peer ilan.peer@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69c... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index b20d64dbba1ad..686a55515cdec 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1707,7 +1707,10 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm, break; }
- if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE) { + if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE && + !WARN_ONCE(!is_valid_ether_addr(scan_6ghz_params[j].bssid), + "scan: invalid BSSID at index %u, index_b=%u\n", + j, idex_b)) { memcpy(&pp->bssid_array[idex_b++], scan_6ghz_params[j].bssid, ETH_ALEN); }
From: Ilan Peer ilan.peer@intel.com
[ Upstream commit e6dd2936ce7ce94a1915b799f8af8193ec628e87 ]
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface.
To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc.
Signed-off-by: Ilan Peer ilan.peer@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 686a55515cdec..9bb8533874d8e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -3057,10 +3057,11 @@ static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type)
ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(IWL_ALWAYS_LONG_GROUP, SCAN_ABORT_UMAC), - 0, sizeof(cmd), &cmd); + CMD_SEND_IN_RFKILL, sizeof(cmd), &cmd); if (!ret) mvm->scan_uid_status[uid] = type << IWL_MVM_SCAN_STOPPING_SHIFT;
+ IWL_DEBUG_SCAN(mvm, "Scan abort: ret=%d\n", ret); return ret; }
From: Dmitry Antipov dmantipov@yandex.ru
[ Upstream commit 92ecbb3ac6f3fe8ae9edf3226c76aa17b6800699 ]
When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...>
Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'.
Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well.
Signed-off-by: Dmitry Antipov dmantipov@yandex.ru Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru [improve (imho) indentation a bit] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/scan.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 933d02d7c1284..62c22ff329ad4 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -733,15 +733,21 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, local->hw_scan_ies_bufsize *= n_bands; }
- local->hw_scan_req = kmalloc( - sizeof(*local->hw_scan_req) + - req->n_channels * sizeof(req->channels[0]) + - local->hw_scan_ies_bufsize, GFP_KERNEL); + local->hw_scan_req = kmalloc(struct_size(local->hw_scan_req, + req.channels, + req->n_channels) + + local->hw_scan_ies_bufsize, + GFP_KERNEL); if (!local->hw_scan_req) return -ENOMEM;
local->hw_scan_req->req.ssids = req->ssids; local->hw_scan_req->req.n_ssids = req->n_ssids; + /* None of the channels are actually set + * up but let UBSAN know the boundaries. + */ + local->hw_scan_req->req.n_channels = req->n_channels; + ies = (u8 *)local->hw_scan_req + sizeof(*local->hw_scan_req) + req->n_channels * sizeof(req->channels[0]);
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit 84b6df4c49a1cc2854a16937acd5fd3e6315d083 ]
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’: openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Muhammad Usama Anjum usama.anjum@collabora.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/openat2/openat2_test.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index 7fb902099de45..f9d2b0ec77564 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -5,6 +5,7 @@ */
#define _GNU_SOURCE +#define __SANE_USERSPACE_TYPES__ // Use ll64 #include <fcntl.h> #include <sched.h> #include <sys/stat.h>
From: John Hubbard jhubbard@nvidia.com
[ Upstream commit cb708ab9f584f159798b60853edcf0c8b67ce295 ]
It's slightly better to set _GNU_SOURCE in the source code, but if one must do it via the compiler invocation, then the best way to do so is this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw edliaw@google.com Reviewed-by: Davidlohr Bueso dave@stgolabs.net Signed-off-by: John Hubbard jhubbard@nvidia.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/futex/functional/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/futex/functional/Makefile b/tools/testing/selftests/futex/functional/Makefile index a392d0917b4e5..994fa3468f170 100644 --- a/tools/testing/selftests/futex/functional/Makefile +++ b/tools/testing/selftests/futex/functional/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 INCLUDES := -I../include -I../../ $(KHDR_INCLUDES) -CFLAGS := $(CFLAGS) -g -O2 -Wall -D_GNU_SOURCE -pthread $(INCLUDES) $(KHDR_INCLUDES) +CFLAGS := $(CFLAGS) -g -O2 -Wall -D_GNU_SOURCE= -pthread $(INCLUDES) $(KHDR_INCLUDES) LDLIBS := -lpthread -lrt
LOCAL_HDRS := \
From: "Rob Herring (Arm)" robh@kernel.org
[ Upstream commit 935df1bd40d43c4ee91838c42a20e9af751885cc ]
Factor out the parsing of interrupt-map interrupt parent phandle and its arg cells to a separate function, of_irq_parse_imap_parent(), so that it can be used in other parsing scenarios (e.g. fw_devlink).
There was a refcount leak on non-matching entries when iterating thru "interrupt-map" which is fixed.
Tested-by: Marc Zyngier maz@kernel.org Tested-by: Anup Patel apatel@ventanamicro.com Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-1-ef86dc5bcd2a@ke... Signed-off-by: Rob Herring (Arm) robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/of/irq.c | 125 ++++++++++++++++++++++++---------------- drivers/of/of_private.h | 3 + 2 files changed, 77 insertions(+), 51 deletions(-)
diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 2bac44f09554b..38ceb29b15f5e 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -25,6 +25,8 @@ #include <linux/string.h> #include <linux/slab.h>
+#include "of_private.h" + /** * irq_of_parse_and_map - Parse and map an interrupt into linux virq space * @dev: Device node of the device whose interrupt is to be mapped @@ -96,6 +98,57 @@ static const char * const of_irq_imap_abusers[] = { NULL, };
+const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, struct of_phandle_args *out_irq) +{ + u32 intsize, addrsize; + struct device_node *np; + + /* Get the interrupt parent */ + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + np = of_node_get(of_irq_dflt_pic); + else + np = of_find_node_by_phandle(be32_to_cpup(imap)); + imap++; + + /* Check if not found */ + if (!np) { + pr_debug(" -> imap parent not found !\n"); + return NULL; + } + + /* Get #interrupt-cells and #address-cells of new parent */ + if (of_property_read_u32(np, "#interrupt-cells", + &intsize)) { + pr_debug(" -> parent lacks #interrupt-cells!\n"); + of_node_put(np); + return NULL; + } + if (of_property_read_u32(np, "#address-cells", + &addrsize)) + addrsize = 0; + + pr_debug(" -> intsize=%d, addrsize=%d\n", + intsize, addrsize); + + /* Check for malformed properties */ + if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS) + || (len < (addrsize + intsize))) { + of_node_put(np); + return NULL; + } + + pr_debug(" -> imaplen=%d\n", len); + + imap += addrsize + intsize; + + out_irq->np = np; + for (int i = 0; i < intsize; i++) + out_irq->args[i] = be32_to_cpup(imap - intsize + i); + out_irq->args_count = intsize; + + return imap; +} + /** * of_irq_parse_raw - Low level interrupt tree parsing * @addr: address specifier (start of "reg" property of the device) in be32 format @@ -112,12 +165,12 @@ static const char * const of_irq_imap_abusers[] = { */ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; + struct device_node *ipar, *tnode, *old = NULL; __be32 initial_match_array[MAX_PHANDLE_ARGS]; const __be32 *match_array = initial_match_array; - const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) }; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i, rc = -EINVAL; + const __be32 *tmp, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) }; + u32 intsize = 1, addrsize; + int i, rc = -EINVAL;
#ifdef DEBUG of_print_phandle_args("of_irq_parse_raw: ", out_irq); @@ -176,6 +229,9 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
/* Now start the actual "proper" walk of the interrupt tree */ while (ipar != NULL) { + int imaplen, match; + const __be32 *imap, *oldimap, *imask; + struct device_node *newpar; /* * Now check if cursor is an interrupt-controller and * if it is then we are done, unless there is an @@ -216,7 +272,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
/* Parse interrupt-map */ match = 0; - while (imaplen > (addrsize + intsize + 1) && !match) { + while (imaplen > (addrsize + intsize + 1)) { /* Compare specifiers */ match = 1; for (i = 0; i < (addrsize + intsize); i++, imaplen--) @@ -224,48 +280,17 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
- /* Get the interrupt parent */ - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - newpar = of_node_get(of_irq_dflt_pic); - else - newpar = of_find_node_by_phandle(be32_to_cpup(imap)); - imap++; - --imaplen; - - /* Check if not found */ - if (newpar == NULL) { - pr_debug(" -> imap parent not found !\n"); - goto fail; - } - - if (!of_device_is_available(newpar)) - match = 0; - - /* Get #interrupt-cells and #address-cells of new - * parent - */ - if (of_property_read_u32(newpar, "#interrupt-cells", - &newintsize)) { - pr_debug(" -> parent lacks #interrupt-cells!\n"); - goto fail; - } - if (of_property_read_u32(newpar, "#address-cells", - &newaddrsize)) - newaddrsize = 0; - - pr_debug(" -> newintsize=%d, newaddrsize=%d\n", - newintsize, newaddrsize); - - /* Check for malformed properties */ - if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS) - || (imaplen < (newaddrsize + newintsize))) { - rc = -EFAULT; + oldimap = imap; + imap = of_irq_parse_imap_parent(oldimap, imaplen, out_irq); + if (!imap) goto fail; - }
- imap += newaddrsize + newintsize; - imaplen -= newaddrsize + newintsize; + match &= of_device_is_available(out_irq->np); + if (match) + break;
+ of_node_put(out_irq->np); + imaplen -= imap - oldimap; pr_debug(" -> imaplen=%d\n", imaplen); } if (!match) { @@ -287,11 +312,11 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) * Successfully parsed an interrupt-map translation; copy new * interrupt specifier into the out_irq structure */ - match_array = imap - newaddrsize - newintsize; - for (i = 0; i < newintsize; i++) - out_irq->args[i] = be32_to_cpup(imap - newintsize + i); - out_irq->args_count = intsize = newintsize; - addrsize = newaddrsize; + match_array = oldimap + 1; + + newpar = out_irq->np; + intsize = out_irq->args_count; + addrsize = (imap - match_array) - intsize;
if (ipar == newpar) { pr_debug("%pOF interrupt-map entry to self\n", ipar); @@ -300,7 +325,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
skiplevel: /* Iterate again with new parent */ - out_irq->np = newpar; pr_debug(" -> new parent: %pOF\n", newpar); of_node_put(ipar); ipar = newpar; @@ -310,7 +334,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
fail: of_node_put(ipar); - of_node_put(newpar);
return rc; } diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index fb6792d381a6b..ee09d7141bcf8 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -151,6 +151,9 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np, extern int of_bus_n_addr_cells(struct device_node *np); extern int of_bus_n_size_cells(struct device_node *np);
+const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, + struct of_phandle_args *out_irq); + struct bus_dma_region; #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA) int of_dma_get_range(struct device_node *np,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Dmitry Torokhov dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/silead.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 3eef8c01090fd..30e15b6a93574 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -71,7 +71,6 @@ struct silead_ts_data { struct regulator_bulk_data regulators[2]; char fw_name[64]; struct touchscreen_properties prop; - u32 max_fingers; u32 chip_id; struct input_mt_pos pos[SILEAD_MAX_FINGERS]; int slots[SILEAD_MAX_FINGERS]; @@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data) touchscreen_parse_properties(data->input, true, &data->prop); silead_apply_efi_fw_min_max(data);
- input_mt_init_slots(data->input, data->max_fingers, + input_mt_init_slots(data->input, SILEAD_MAX_FINGERS, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client) return; }
- if (buf[0] > data->max_fingers) { + if (buf[0] > SILEAD_MAX_FINGERS) { dev_warn(dev, "More touches reported then supported %d > %d\n", - buf[0], data->max_fingers); - buf[0] = data->max_fingers; + buf[0], SILEAD_MAX_FINGERS); + buf[0] = SILEAD_MAX_FINGERS; }
if (silead_ts_handle_pen_data(data, buf)) @@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
static int silead_ts_init(struct i2c_client *client) { - struct silead_ts_data *data = i2c_get_clientdata(client); int error;
error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, @@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client) usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR, - data->max_fingers); + SILEAD_MAX_FINGERS); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); @@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client) const char *str; int error;
- error = device_property_read_u32(dev, "silead,max-fingers", - &data->max_fingers); - if (error) { - dev_dbg(dev, "Max fingers read error %d\n", error); - data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ - } - error = device_property_read_string(dev, "firmware-name", &str); if (!error) snprintf(data->fw_name, sizeof(data->fw_name),
Hi!
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers.
This does not fix a serious bug, should not be in stable.
Best regards, Pavel
Hi Pavel,
On 7/10/24 11:58 AM, Pavel Machek wrote:
Hi!
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers.
This does not fix a serious bug, should not be in stable.
This patch is necessary for clean backporting of new DMI quirks added to drivers/platform/x86/touchscreen_dmi.c, so IMHO it does make sense as a stable series patch.
Regards,
Hans
On Wed 2024-07-10 11:59:48, Hans de Goede wrote:
Hi Pavel,
On 7/10/24 11:58 AM, Pavel Machek wrote:
Hi!
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers.
This does not fix a serious bug, should not be in stable.
This patch is necessary for clean backporting of new DMI quirks added to drivers/platform/x86/touchscreen_dmi.c, so IMHO it does make sense as a stable series patch.
That's likely not reason it ended up it autosel, but why not. "Stable-dep-of" tag would be nice in that case.
Best regards, Pavel
From: Eric Dumazet edumazet@google.com
[ Upstream commit db0090c6eb12c31246438b7fe2a8f1b833e7a653 ]
As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled.
Disabling preemption in rpl_output() is not good enough, because rpl_output() is called from process context, lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter rpl_output() and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of preempt_disable().
Apply a similar change in rpl_input().
Signed-off-by: Eric Dumazet edumazet@google.com Cc: Alexander Aring aahringo@redhat.com Acked-by: Paolo Abeni pabeni@redhat.com Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/rpl_iptunnel.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/net/ipv6/rpl_iptunnel.c b/net/ipv6/rpl_iptunnel.c index ff691d9f4a04f..26adbe7f8a2f0 100644 --- a/net/ipv6/rpl_iptunnel.c +++ b/net/ipv6/rpl_iptunnel.c @@ -212,9 +212,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb) if (unlikely(err)) goto drop;
- preempt_disable(); + local_bh_disable(); dst = dst_cache_get(&rlwt->cache); - preempt_enable(); + local_bh_enable();
if (unlikely(!dst)) { struct ipv6hdr *hdr = ipv6_hdr(skb); @@ -234,9 +234,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb) goto drop; }
- preempt_disable(); + local_bh_disable(); dst_cache_set_ip6(&rlwt->cache, dst, &fl6.saddr); - preempt_enable(); + local_bh_enable(); }
skb_dst_drop(skb); @@ -268,9 +268,8 @@ static int rpl_input(struct sk_buff *skb) return err; }
- preempt_disable(); + local_bh_disable(); dst = dst_cache_get(&rlwt->cache); - preempt_enable();
skb_dst_drop(skb);
@@ -278,14 +277,13 @@ static int rpl_input(struct sk_buff *skb) ip6_route_input(skb); dst = skb_dst(skb); if (!dst->error) { - preempt_disable(); dst_cache_set_ip6(&rlwt->cache, dst, &ipv6_hdr(skb)->saddr); - preempt_enable(); } } else { skb_dst_set(skb, dst); } + local_bh_enable();
err = skb_cow_head(skb, LL_RESERVED_SPACE(dst->dev)); if (unlikely(err))
From: Eric Dumazet edumazet@google.com
[ Upstream commit cf28ff8e4c02e1ffa850755288ac954b6ff0db8c ]
As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Paolo Abeni pabeni@redhat.com Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/ila/ila_lwt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/ila/ila_lwt.c b/net/ipv6/ila/ila_lwt.c index 8c1ce78956bae..9d37f7164e732 100644 --- a/net/ipv6/ila/ila_lwt.c +++ b/net/ipv6/ila/ila_lwt.c @@ -58,7 +58,9 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb) return orig_dst->lwtstate->orig_output(net, sk, skb); }
+ local_bh_disable(); dst = dst_cache_get(&ilwt->dst_cache); + local_bh_enable(); if (unlikely(!dst)) { struct ipv6hdr *ip6h = ipv6_hdr(skb); struct flowi6 fl6; @@ -86,8 +88,11 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb) goto drop; }
- if (ilwt->connected) + if (ilwt->connected) { + local_bh_disable(); dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr); + local_bh_enable(); + } }
skb_dst_set(skb, dst);
From: Andreas Hindborg a.hindborg@samsung.com
[ Upstream commit c462ecd659b5fce731f1d592285832fd6ad54053 ]
Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check.
Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1].
Link: https://lore.kernel.org/all/87wmn8mocd.fsf@metaspace.dk/
Signed-off-by: Andreas Hindborg a.hindborg@samsung.com Reviewed-by: Ming Lei ming.lei@redhat.com Link: https://lore.kernel.org/r/20240603192645.977968-1-nmi@metaspace.dk [axboe: remove unnecessary braces and != 0 check] Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/null_blk/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c index 220cedda2ca7d..4d78b5583dc6a 100644 --- a/drivers/block/null_blk/main.c +++ b/drivers/block/null_blk/main.c @@ -1958,8 +1958,8 @@ static int null_validate_conf(struct nullb_device *dev) return -EINVAL; }
- dev->blocksize = round_down(dev->blocksize, 512); - dev->blocksize = clamp_t(unsigned int, dev->blocksize, 512, 4096); + if (blk_validate_block_size(dev->blocksize)) + return -EINVAL;
if (dev->queue_mode == NULL_Q_MQ && dev->use_per_node_hctx) { if (dev->submit_queues != nr_online_nodes)
From: Masahiro Yamada masahiroy@kernel.org
[ Upstream commit 46edf4372e336ef3a61c3126e49518099d2e2e6d ]
Currently, the initial state of the "Save" button is always active.
If none of the CONFIG options are changed while loading the .config file, the "Save" button should be greyed out.
This can be fixed by calling conf_read() after widget initialization.
Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/gconf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c index 17adabfd6e6bf..5d1404178e482 100644 --- a/scripts/kconfig/gconf.c +++ b/scripts/kconfig/gconf.c @@ -1481,7 +1481,6 @@ int main(int ac, char *av[])
conf_parse(name); fixup_rootmenu(&rootmenu); - conf_read(NULL);
/* Load the interface and connect signals */ init_main_window(glade_file); @@ -1489,6 +1488,8 @@ int main(int ac, char *av[]) init_left_tree(); init_right_tree();
+ conf_read(NULL); + switch (view_mode) { case SINGLE_VIEW: display_tree_part();
From: Masahiro Yamada masahiroy@kernel.org
[ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ]
expr_trans_bool() performs an incorrect transformation.
[Test Code]
config MODULES def_bool y modules
config A def_bool y select C if B != n
config B def_tristate m
config C tristate
[Result]
CONFIG_MODULES=y CONFIG_A=y CONFIG_B=m CONFIG_C=m
This output is incorrect because CONFIG_C=y is expected.
Documentation/kbuild/kconfig-language.rst clearly explains the function of the '!=' operator:
If the values of both symbols are equal, it returns 'n', otherwise 'y'.
Therefore, the statement:
select C if B != n
should be equivalent to:
select C if y
Or, more simply:
select C
Hence, the symbol C should be selected by the value of A, which is 'y'.
However, expr_trans_bool() wrongly transforms it to:
select C if B
Therefore, the symbol C is selected by (A && B), which is 'm'.
The comment block of expr_trans_bool() correctly explains its intention:
* bool FOO!=n => FOO ^^^^
If FOO is bool, FOO!=n can be simplified into FOO. This is correct.
However, the actual code performs this transformation when FOO is tristate:
if (e->left.sym->type == S_TRISTATE) { ^^^^^^^^^^
While it can be fixed to S_BOOLEAN, there is no point in doing so because expr_tranform() already transforms FOO!=n to FOO when FOO is bool. (see the "case E_UNEQUAL" part)
expr_trans_bool() is wrong and unnecessary.
Signed-off-by: Masahiro Yamada masahiroy@kernel.org Acked-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/expr.c | 29 ----------------------------- scripts/kconfig/expr.h | 1 - scripts/kconfig/menu.c | 2 -- 3 files changed, 32 deletions(-)
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c index 81ebf8108ca74..81dfdf4470f75 100644 --- a/scripts/kconfig/expr.c +++ b/scripts/kconfig/expr.c @@ -396,35 +396,6 @@ static struct expr *expr_eliminate_yn(struct expr *e) return e; }
-/* - * bool FOO!=n => FOO - */ -struct expr *expr_trans_bool(struct expr *e) -{ - if (!e) - return NULL; - switch (e->type) { - case E_AND: - case E_OR: - case E_NOT: - e->left.expr = expr_trans_bool(e->left.expr); - e->right.expr = expr_trans_bool(e->right.expr); - break; - case E_UNEQUAL: - // FOO!=n -> FOO - if (e->left.sym->type == S_TRISTATE) { - if (e->right.sym == &symbol_no) { - e->type = E_SYMBOL; - e->right.sym = NULL; - } - } - break; - default: - ; - } - return e; -} - /* * e1 || e2 -> ? */ diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 9c9caca5bd5f2..c91060e19e477 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -296,7 +296,6 @@ void expr_free(struct expr *e); void expr_eliminate_eq(struct expr **ep1, struct expr **ep2); int expr_eq(struct expr *e1, struct expr *e2); tristate expr_calc_value(struct expr *e); -struct expr *expr_trans_bool(struct expr *e); struct expr *expr_eliminate_dups(struct expr *e); struct expr *expr_transform(struct expr *e); int expr_contains_symbol(struct expr *dep, struct symbol *sym); diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 109325f31bef3..9d4c3f366a061 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -380,8 +380,6 @@ void menu_finalize(struct menu *parent) dep = expr_transform(dep); dep = expr_alloc_and(expr_copy(basedep), dep); dep = expr_eliminate_dups(dep); - if (menu->sym && menu->sym->type != S_TRISTATE) - dep = expr_trans_bool(dep); prop->visible.expr = dep;
/*
From: Louis Dalibard ontake@ontake.dev
[ Upstream commit a3a5a37efba11b7cf1a86abe7bccfbcdb521764e ]
At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.
The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used.
The device ID was added and the battery ignore quirk was enabled for it.
[jkosina@suse.com: reformatted changelog a bit] Signed-off-by: Louis Dalibard ontake@ontake.dev Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-input.c | 4 ++++ 2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 405d88b08908d..4b8c1d18c21e0 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -417,6 +417,8 @@ #define I2C_DEVICE_ID_HP_SPECTRE_X360_13_AW0020NG 0x29DF #define I2C_DEVICE_ID_ASUS_TP420IA_TOUCHSCREEN 0x2BC8 #define I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN 0x2C82 +#define I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN 0x2F2C +#define I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN 0x4116 #define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN 0x2544 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN 0x2706 #define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN 0x261A diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 4ba5df3c1e039..b0091819fd58a 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -374,6 +374,10 @@ static const struct hid_device_id hid_battery_quirks[] = { HID_BATTERY_QUIRK_IGNORE }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN), HID_BATTERY_QUIRK_IGNORE }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN), + HID_BATTERY_QUIRK_IGNORE }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN), + HID_BATTERY_QUIRK_IGNORE }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN), HID_BATTERY_QUIRK_IGNORE }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN),
linux-stable-mirror@lists.linaro.org
-
Hans de Goede -
Pavel Machek -
Pavel Machek -
Sasha Levin