From: Jay Fang f.fangjian@huawei.com
[ Upstream commit 9e37a3ab0627011fb63875e9a93094b6fc8ddf48 ]
In function 'spi_test_run_iter': Value 'tx_buf' might be 'rx_buf'.
Signed-off-by: Jay Fang f.fangjian@huawei.com Link: https://lore.kernel.org/r/1620629903-15493-5-git-send-email-f.fangjian@huawe... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-loopback-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index 7120083fe761..cac38753d0cd 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -803,7 +803,7 @@ static int spi_test_run_iter(struct spi_device *spi, test.transfers[i].len = len; if (test.transfers[i].tx_buf) test.transfers[i].tx_buf += tx_off; - if (test.transfers[i].tx_buf) + if (test.transfers[i].rx_buf) test.transfers[i].rx_buf += rx_off; }
From: Jay Fang f.fangjian@huawei.com
[ Upstream commit 026a1dc1af52742c5897e64a3431445371a71871 ]
pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after kfree() to avoid double free.
Signed-off-by: Jay Fang f.fangjian@huawei.com Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawe... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-topcliff-pch.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index fe707440f8c3..9b24ebbba346 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -585,8 +585,10 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw) data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); if (data->pkt_tx_buff != NULL) { data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); - if (!data->pkt_rx_buff) + if (!data->pkt_rx_buff) { kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + } }
if (!data->pkt_rx_buff) {
From: Tian Tao tiantao6@hisilicon.com
[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ]
word_len should be checked in the omap1_spi100k_setup_transfer function to see if it exceeds 32.
Signed-off-by: Tian Tao tiantao6@hisilicon.com Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilic... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-omap-100k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 1eccdc4a4581..2eeb0fe2eed2 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -251,7 +251,7 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi, else word_len = spi->bits_per_word;
- if (spi->bits_per_word > 32) + if (word_len > 32) return -EINVAL; cs->word_len = word_len;
From: Bixuan Cui cuibixuan@huawei.com
[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Bixuan Cui cuibixuan@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/nx/nx-842-pseries.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c index cddc6d8b55d9..2e5b4004f0ee 100644 --- a/drivers/crypto/nx/nx-842-pseries.c +++ b/drivers/crypto/nx/nx-842-pseries.c @@ -1086,6 +1086,7 @@ static struct vio_device_id nx842_vio_driver_ids[] = { {"ibm,compression-v1", "ibm,compression"}, {"", ""}, }; +MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids);
static struct vio_driver nx842_vio_driver = { .name = KBUILD_MODNAME,
From: Pavel Skripkin paskripkin@gmail.com
[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]
syzbot reported leak in cpia2 usb driver. The problem was in invalid error handling.
v4l2_device_register() is called in cpia2_init_camera_struct(), but all error cases after cpia2_init_camera_struct() did not call the v4l2_device_unregister()
Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/cpia2/cpia2.h | 1 + drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++ drivers/media/usb/cpia2/cpia2_usb.c | 13 +++++++------ 3 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h index cdef677d57ec..80a7af6482ae 100644 --- a/drivers/media/usb/cpia2/cpia2.h +++ b/drivers/media/usb/cpia2/cpia2.h @@ -442,6 +442,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); int cpia2_do_command(struct camera_data *cam, unsigned int command, unsigned char direction, unsigned char param); +void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf); struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf); int cpia2_init_camera(struct camera_data *cam); int cpia2_allocate_buffers(struct camera_data *cam); diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c index 0310fd6ed103..828f9689f4a1 100644 --- a/drivers/media/usb/cpia2/cpia2_core.c +++ b/drivers/media/usb/cpia2/cpia2_core.c @@ -2158,6 +2158,18 @@ static void reset_camera_struct(struct camera_data *cam) cam->height = cam->params.roi.height; }
+/****************************************************************************** + * + * cpia2_init_camera_struct + * + * Deinitialize camera struct + *****************************************************************************/ +void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf) +{ + v4l2_device_unregister(&cam->v4l2_dev); + kfree(cam); +} + /****************************************************************************** * * cpia2_init_camera_struct diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index 30e27844e0e9..4f4a130f17af 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -860,15 +860,13 @@ static int cpia2_usb_probe(struct usb_interface *intf, ret = set_alternate(cam, USBIF_CMDONLY); if (ret < 0) { ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; }
if((ret = cpia2_init_camera(cam)) < 0) { ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; } LOG(" CPiA Version: %d.%02d (%d.%d)\n", cam->params.version.firmware_revision_hi, @@ -888,11 +886,14 @@ static int cpia2_usb_probe(struct usb_interface *intf, ret = cpia2_register_camera(cam); if (ret < 0) { ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret); - kfree(cam); - return ret; + goto alt_err; }
return 0; + +alt_err: + cpia2_deinit_camera_struct(cam, intf); + return ret; }
/******************************************************************************
From: Hans Verkuil hverkuil-cisco@xs4all.nl
[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]
The cobalt_s_bit_sysctrl reads the old register value over PCI, then changes a bit and sets writes the new value to the register.
This is used among other things for setting the HPD output pin.
But if the HPD is changed for multiple inputs at the same time, then this causes a race condition where a stale value is read.
Serialize this function with a mutex.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cobalt/cobalt-driver.c | 1 + drivers/media/pci/cobalt/cobalt-driver.h | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c index 979634000597..17b717a1c7fa 100644 --- a/drivers/media/pci/cobalt/cobalt-driver.c +++ b/drivers/media/pci/cobalt/cobalt-driver.c @@ -689,6 +689,7 @@ static int cobalt_probe(struct pci_dev *pci_dev, return -ENOMEM; cobalt->pci_dev = pci_dev; cobalt->instance = i; + mutex_init(&cobalt->pci_lock);
retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev); if (retval) { diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h index ed00dc9d9399..8f9454d30b95 100644 --- a/drivers/media/pci/cobalt/cobalt-driver.h +++ b/drivers/media/pci/cobalt/cobalt-driver.h @@ -262,6 +262,8 @@ struct cobalt { int instance; struct pci_dev *pci_dev; struct v4l2_device v4l2_dev; + /* serialize PCI access in cobalt_s_bit_sysctrl() */ + struct mutex pci_lock;
void __iomem *bar0, *bar1;
@@ -333,10 +335,13 @@ static inline u32 cobalt_g_sysctrl(struct cobalt *cobalt) static inline void cobalt_s_bit_sysctrl(struct cobalt *cobalt, int bit, int val) { - u32 ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE); + u32 ctrl;
+ mutex_lock(&cobalt->pci_lock); + ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE); cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE, (ctrl & ~(1UL << bit)) | (val << bit)); + mutex_unlock(&cobalt->pci_lock); }
static inline u32 cobalt_g_sysstat(struct cobalt *cobalt)
From: Anirudh Rayabharam mail@anirudhrb.com
[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]
syzbot has reported the following warning in pvr2_i2c_done:
sysfs group 'power' not found for kobject '1-0043'
When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is not unregistered along with the USB and v4l2 teardown. As part of the USB device disconnect, the sysfs files of the subdevices are also deleted. So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the sysfs files have been deleted.
To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make the device deregistration code shared by calling pvr_hdw_disconnect from pvr2_hdw_destroy.
Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c index ff489645e070..0cb8dd585235 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -2722,9 +2722,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw) pvr2_stream_destroy(hdw->vid_stream); hdw->vid_stream = NULL; } - pvr2_i2c_core_done(hdw); v4l2_device_unregister(&hdw->v4l2_dev); - pvr2_hdw_remove_usb_stuff(hdw); + pvr2_hdw_disconnect(hdw); mutex_lock(&pvr2_unit_mtx); do { if ((hdw->unit_number >= 0) && @@ -2751,6 +2750,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw) { pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw); LOCK_TAKE(hdw->big_lock); + pvr2_i2c_core_done(hdw); LOCK_TAKE(hdw->ctl_lock); pvr2_hdw_remove_usb_stuff(hdw); LOCK_GIVE(hdw->ctl_lock);
From: Jack Xu jack.xu@intel.com
[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]
Check the return code of the function qat_hal_rd_rel_reg() and return it to the caller.
This is to fix the following warning when compiling the driver with clang scan-build:
drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value
Signed-off-by: Jack Xu jack.xu@intel.com Co-developed-by: Zhehui Xiang zhehui.xiang@intel.com Signed-off-by: Zhehui Xiang zhehui.xiang@intel.com Reviewed-by: Giovanni Cabiddu giovanni.cabiddu@intel.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c index 8c4fd255a601..cdf80c16a033 100644 --- a/drivers/crypto/qat/qat_common/qat_hal.c +++ b/drivers/crypto/qat/qat_common/qat_hal.c @@ -1255,7 +1255,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle, pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr); return -EINVAL; } - qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval); + status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval); + if (status) { + pr_err("QAT: failed to read register"); + return status; + } gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum); data16low = 0xffff & data; data16hi = 0xffff & (data >> 0x10);
From: Jack Xu jack.xu@intel.com
[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]
Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware loader.
This is to fix the following warning when compiling the driver using the clang compiler with CC=clang W=2:
drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]
Signed-off-by: Jack Xu jack.xu@intel.com Co-developed-by: Zhehui Xiang zhehui.xiang@intel.com Signed-off-by: Zhehui Xiang zhehui.xiang@intel.com Reviewed-by: Giovanni Cabiddu giovanni.cabiddu@intel.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/qat/qat_common/qat_uclo.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/crypto/qat/qat_common/qat_uclo.c b/drivers/crypto/qat/qat_common/qat_uclo.c index 4f1cd83bf56f..a8e3191e5185 100644 --- a/drivers/crypto/qat/qat_common/qat_uclo.c +++ b/drivers/crypto/qat/qat_common/qat_uclo.c @@ -385,7 +385,6 @@ static int qat_uclo_init_umem_seg(struct icp_qat_fw_loader_handle *handle, return 0; }
-#define ICP_DH895XCC_PESRAM_BAR_SIZE 0x80000 static int qat_uclo_init_ae_memory(struct icp_qat_fw_loader_handle *handle, struct icp_qat_uof_initmem *init_mem) {
From: Lv Yunlong lyl2019@mail.ustc.edu.cn
[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]
A use after free bug caused by the dangling pointer filp->privitate_data in v4l2_fh_release. See https://lore.kernel.org/patchwork/patch/1419058/.
My patch sets the dangling pointer to NULL to provide robust.
Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/v4l2-core/v4l2-fh.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c index 0c5e69070586..d44b289205b4 100644 --- a/drivers/media/v4l2-core/v4l2-fh.c +++ b/drivers/media/v4l2-core/v4l2-fh.c @@ -109,6 +109,7 @@ int v4l2_fh_release(struct file *filp) v4l2_fh_del(fh); v4l2_fh_exit(fh); kfree(fh); + filp->private_data = NULL; } return 0; }
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 1a4520090681853e6b850cbe54b27247a013e0e5 ]
In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'. However, this two drivers are separate. The user may not load the 'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet has not been initialized when 'tasklet_schedule' is called, so it is necessary to check whether the tasklet is initialized in 'bt878_probe'.
Fix this by adding a check at the end of bt878_probe.
The KASAN's report reveals it:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177- gdba4159c14ef-dirty #40 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522 tasklet_action+0x50/0x70 kernel/softirq.c:540 __do_softirq+0x224/0x92c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:372 [inline] irq_exit+0x15a/0x180 kernel/softirq.c:412 exiting_irq arch/x86/include/asm/apic.h:535 [inline] do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline] RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline] RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584 Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8 14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad 24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000 RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0 RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58 R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4692a9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60 R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000000 ---[ end trace 68e5849c3f77cbb6 ]--- RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/bt8xx/bt878.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c index 90fcccc05b56..c678d7120727 100644 --- a/drivers/media/pci/bt8xx/bt878.c +++ b/drivers/media/pci/bt8xx/bt878.c @@ -494,6 +494,9 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) btwrite(0, BT878_AINT_MASK); bt878_num++;
+ if (!bt->tasklet.func) + tasklet_disable(&bt->tasklet); + return 0;
fail2:
From: Evgeny Novikov novikov@ispras.ru
[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]
When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to access fields of ctx that is NULL at that point. The patch gets rid of these accesses.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov novikov@ispras.ru Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/sti/hva/hva-hw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c index c4d97fb80aae..1653892da9a5 100644 --- a/drivers/media/platform/sti/hva/hva-hw.c +++ b/drivers/media/platform/sti/hva/hva-hw.c @@ -127,8 +127,7 @@ static irqreturn_t hva_hw_its_irq_thread(int irq, void *arg) ctx_id = (hva->sts_reg & 0xFF00) >> 8; if (ctx_id >= HVA_MAX_INSTANCES) { dev_err(dev, "%s %s: bad context identifier: %d\n", - ctx->name, __func__, ctx_id); - ctx->hw_err = true; + HVA_PREFIX, __func__, ctx_id); goto out; }
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ]
Before referencing 'host->data', the driver needs to check whether it is null pointer, otherwise it will cause a null pointer reference.
This log reveals it:
[ 29.355199] BUG: kernel NULL pointer dereference, address: 0000000000000014 [ 29.357323] #PF: supervisor write access in kernel mode [ 29.357706] #PF: error_code(0x0002) - not-present page [ 29.358088] PGD 0 P4D 0 [ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI [ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4- g70e7f0549188-dirty #102 [ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.363604] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.367197] Call Trace: [ 29.367381] <IRQ> [ 29.367537] __handle_irq_event_percpu+0x53/0x3e0 [ 29.367916] handle_irq_event_percpu+0x35/0x90 [ 29.368247] handle_irq_event+0x39/0x60 [ 29.368632] handle_fasteoi_irq+0xc2/0x1d0 [ 29.368950] __common_interrupt+0x7f/0x150 [ 29.369254] common_interrupt+0xb4/0xd0 [ 29.369547] </IRQ> [ 29.369708] asm_common_interrupt+0x1e/0x40 [ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20 [ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91 [ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4 RDI: ffffffff85403406 [ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 29.373646] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86009188 [ 29.374160] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100258000 [ 29.374690] default_idle+0x9/0x10 [ 29.374944] arch_cpu_idle+0xa/0x10 [ 29.375198] default_idle_call+0x6e/0x250 [ 29.375491] do_idle+0x1f0/0x2d0 [ 29.375740] cpu_startup_entry+0x18/0x20 [ 29.376034] start_secondary+0x11f/0x160 [ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb [ 29.376705] Modules linked in: [ 29.376939] Dumping ftrace buffer: [ 29.377187] (ftrace buffer empty) [ 29.377460] CR2: 0000000000000014 [ 29.377712] ---[ end trace 51a473dffb618c47 ]--- [ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.381653] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt [ 29.385882] Dumping ftrace buffer: [ 29.386135] (ftrace buffer empty) [ 29.386401] Kernel Offset: disabled [ 29.386656] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/via-sdmmc.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index b455e9cf95af..a3472127bea3 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -859,6 +859,9 @@ static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask) { BUG_ON(intmask == 0);
+ if (!host->data) + return; + if (intmask & VIA_CRDR_SDSTS_DT) host->data->error = -ETIMEDOUT; else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit 22ca9f4aaf431a9413dcc115dd590123307f274f ]
crypto_shash_alg_has_setkey() is implemented by testing whether the .setkey() member of a struct shash_alg points to the default version, called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static inline, this requires shash_no_setkey() to be exported to modules.
Unfortunately, when building with CFI, function pointers are routed via CFI stubs which are private to each module (or to the kernel proper) and so this function pointer comparison may fail spuriously.
Let's fix this by turning crypto_shash_alg_has_setkey() into an out of line function.
Cc: Sami Tolvanen samitolvanen@google.com Cc: Eric Biggers ebiggers@kernel.org Signed-off-by: Ard Biesheuvel ardb@kernel.org Reviewed-by: Eric Biggers ebiggers@google.com Reviewed-by: Sami Tolvanen samitolvanen@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- crypto/shash.c | 18 +++++++++++++++--- include/crypto/internal/hash.h | 8 +------- 2 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/crypto/shash.c b/crypto/shash.c index a1c7609578ea..7eebf3cde7b7 100644 --- a/crypto/shash.c +++ b/crypto/shash.c @@ -24,12 +24,24 @@
static const struct crypto_type crypto_shash_type;
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key, - unsigned int keylen) +static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key, + unsigned int keylen) { return -ENOSYS; } -EXPORT_SYMBOL_GPL(shash_no_setkey); + +/* + * Check whether an shash algorithm has a setkey function. + * + * For CFI compatibility, this must not be an inline function. This is because + * when CFI is enabled, modules won't get the same address for shash_no_setkey + * (if it were exported, which inlining would require) as the core kernel will. + */ +bool crypto_shash_alg_has_setkey(struct shash_alg *alg) +{ + return alg->setkey != shash_no_setkey; +} +EXPORT_SYMBOL_GPL(crypto_shash_alg_has_setkey);
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key, unsigned int keylen) diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h index 5203560f992e..000c049a75f7 100644 --- a/include/crypto/internal/hash.h +++ b/include/crypto/internal/hash.h @@ -80,13 +80,7 @@ int ahash_register_instance(struct crypto_template *tmpl, struct ahash_instance *inst); void ahash_free_instance(struct crypto_instance *inst);
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key, - unsigned int keylen); - -static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg) -{ - return alg->setkey != shash_no_setkey; -} +bool crypto_shash_alg_has_setkey(struct shash_alg *alg);
bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg);
From: Mauro Carvalho Chehab mchehab+huawei@kernel.org
[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]
The risk of especulation is actually almost-non-existing here, as there are very few users of TCP/IP using the DVB stack, as, this is mainly used with DVB-S/S2 cards, and only by people that receives TCP/IP from satellite connections, which limits a lot the number of users of such feature(*).
(*) In thesis, DVB-C cards could also benefit from it, but I'm yet to see a hardware that supports it.
Yet, fixing it is trivial.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index 9914f69a4a02..f133489af9b9 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -57,6 +57,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/nospec.h> #include <linux/etherdevice.h> #include <linux/dvb/net.h> #include <linux/uio.h> @@ -1350,14 +1351,20 @@ static int dvb_net_do_ioctl(struct file *file, struct net_device *netdev; struct dvb_net_priv *priv_data; struct dvb_net_if *dvbnetif = parg; + int if_num = dvbnetif->if_num;
- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || - !dvbnet->state[dvbnetif->if_num]) { + if (if_num >= DVB_NET_DEVICES_MAX) { ret = -EINVAL; goto ioctl_error; } + if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
- netdev = dvbnet->device[dvbnetif->if_num]; + if (!dvbnet->state[if_num]) { + ret = -EINVAL; + goto ioctl_error; + } + + netdev = dvbnet->device[if_num];
priv_data = netdev_priv(netdev); dvbnetif->pid=priv_data->pid; @@ -1410,14 +1417,20 @@ static int dvb_net_do_ioctl(struct file *file, struct net_device *netdev; struct dvb_net_priv *priv_data; struct __dvb_net_if_old *dvbnetif = parg; + int if_num = dvbnetif->if_num; + + if (if_num >= DVB_NET_DEVICES_MAX) { + ret = -EINVAL; + goto ioctl_error; + } + if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || - !dvbnet->state[dvbnetif->if_num]) { + if (!dvbnet->state[if_num]) { ret = -EINVAL; goto ioctl_error; }
- netdev = dvbnet->device[dvbnetif->if_num]; + netdev = dvbnet->device[if_num];
priv_data = netdev_priv(netdev); dvbnetif->pid=priv_data->pid;
From: Mauro Carvalho Chehab mchehab+huawei@kernel.org
[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]
As reported by smatch: drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list
If an error occur at the end of the registration logic, it won't drop the device from the list.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/common/siano/smsdvb-main.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c index 9d5eb8b6aede..3a5b5f94398a 100644 --- a/drivers/media/common/siano/smsdvb-main.c +++ b/drivers/media/common/siano/smsdvb-main.c @@ -1187,6 +1187,10 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev, return 0;
media_graph_error: + mutex_lock(&g_smsdvb_clientslock); + list_del(&client->entry); + mutex_unlock(&g_smsdvb_clientslock); + smsdvb_debugfs_release(client);
client_error:
From: Josef Bacik josef@toxicpanda.com
[ Upstream commit 04587ad9bef6ce9d510325b4ba9852b6129eebdb ]
If we fail to update the delayed inode we need to abort the transaction, because we could leave an inode with the improper counts or some other such corruption behind.
Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/delayed-inode.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 4d8f8a8c9c90..29e75fba5376 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1076,6 +1076,14 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans, btrfs_delayed_inode_release_metadata(root, node); btrfs_release_delayed_inode(node);
+ /* + * If we fail to update the delayed inode we need to abort the + * transaction, because we could leave the inode with the improper + * counts behind. + */ + if (ret && ret != -ENOENT) + btrfs_abort_transaction(trans, ret); + return ret;
search:
From: Qu Wenruo wqu@suse.com
[ Upstream commit 87b4d86baae219a9a79f6b0a1434b2a42fd40d09 ]
Currently we use page Private2 bit to indicate that we have ordered extent for the page range.
But the lifespan of it is not consistent, during regular writeback path, there are two locations to clear the same PagePrivate2:
T ----- Page marked Dirty | + ----- Page marked Private2, through btrfs_run_dealloc_range() | + ----- Page cleared Private2, through btrfs_writepage_cow_fixup() | in __extent_writepage_io() | ^^^ Private2 cleared for the first time | + ----- Page marked Writeback, through btrfs_set_range_writeback() | in __extent_writepage_io(). | + ----- Page cleared Private2, through | btrfs_writepage_endio_finish_ordered() | ^^^ Private2 cleared for the second time. | + ----- Page cleared Writeback, through btrfs_writepage_endio_finish_ordered()
Currently PagePrivate2 is mostly to prevent ordered extent accounting being executed for both endio and invalidatepage. Thus only the one who cleared page Private2 is responsible for ordered extent accounting.
But the fact is, in btrfs_writepage_endio_finish_ordered(), page Private2 is cleared and ordered extent accounting is executed unconditionally.
The race prevention only happens through btrfs_invalidatepage(), where we wait for the page writeback first, before checking the Private2 bit.
This means, Private2 is also protected by Writeback bit, and there is no need for btrfs_writepage_cow_fixup() to clear Priavte2.
This patch will change btrfs_writepage_cow_fixup() to just check PagePrivate2, not to clear it. The clearing will happen in either btrfs_invalidatepage() or btrfs_writepage_endio_finish_ordered().
This makes the Private2 bit easier to understand, just meaning the page has unfinished ordered extent attached to it.
And this patch is a hard requirement for the incoming refactoring for how we finished ordered IO for endio context, as the coming patch will check Private2 to determine if we need to do the ordered extent accounting. Thus this patch is definitely needed or we will hang due to unfinished ordered extent.
Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4b671e5c33ce..ac9d8f2e3f01 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2149,7 +2149,7 @@ static int btrfs_writepage_start_hook(struct page *page, u64 start, u64 end) struct btrfs_root *root = BTRFS_I(inode)->root;
/* this page is properly in the ordered list */ - if (TestClearPagePrivate2(page)) + if (PagePrivate2(page)) return 0;
if (PageChecked(page))
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit b05fbcc36be1f8597a1febef4892053a0b2f3f60 ]
With a config having PAGE_SIZE set to 256K, BTRFS build fails with the following message
include/linux/compiler_types.h:326:38: error: call to '__compiletime_assert_791' declared with attribute error: BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0
BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with 256K pages at the time being.
There are two platforms that can select 256K pages: - hexagon - powerpc
Disable BTRFS when 256K page size is selected. Supporting this would require changes to the subpage mode that's currently being developed. Given that 256K is many times larger than page sizes commonly used and for what the algorithms and structures have been tuned, it's out of scope and disabling build is a reasonable option.
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu [ update changelog ] Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig index 80e9c18ea64f..fd6b67c40d9d 100644 --- a/fs/btrfs/Kconfig +++ b/fs/btrfs/Kconfig @@ -9,6 +9,8 @@ config BTRFS_FS select RAID6_PQ select XOR_BLOCKS select SRCU + depends on !PPC_256K_PAGES # powerpc + depends on !PAGE_SIZE_256KB # hexagon
help Btrfs is a general purpose copy-on-write filesystem with extents,
From: Axel Lin axel.lin@ingics.com
[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ]
Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time.
Also fix returning negative value when new_sel < old_sel.
Signed-off-by: Axel Lin axel.lin@ingics.com Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/da9052-regulator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 9ececfef42d6..bd91c95f73e0 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -258,7 +258,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev, case DA9052_ID_BUCK3: case DA9052_ID_LDO2: case DA9052_ID_LDO3: - ret = (new_sel - old_sel) * info->step_uV / 6250; + ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV, + 6250); break; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin