From: Maurizio Lombardi mlombard@redhat.com

[ Upstream commit 84ed64b1a7a7fcd507598dee7708c1f225123711 ]

Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held().

Signed-off-by: Maurizio Lombardi mlombard@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_tmr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index e4513ef09159..3efd5a3bd69d 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -82,8 +82,8 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, { struct se_session *sess = se_cmd->se_sess;

- assert_spin_locked(&sess->sess_cmd_lock); - WARN_ON_ONCE(!irqs_disabled()); + lockdep_assert_held(&sess->sess_cmd_lock); + /* * If command already reached CMD_T_COMPLETE state within * target_complete_cmd() or CMD_T_FABRIC_STOP due to shutdown,

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 0582d984793d30442da88fe458674502bad1ad29 ]

Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:

drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line: * struct i2c_spec_values: drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line: * struct rk3x_i2c_calced_timings: drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line: * struct rk3x_i2c_soc_data: drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a START condition, which triggers a REG_INT_START interrupt. drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get timing values of I2C specification drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate divider values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate timing values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Setup I2C registers for an I2C operation specified by msgs, num.

Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-rk3x.c | 44 +++++++++++++++++------------------ 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 02ddb237f69a..13c14eb175e9 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -80,7 +80,7 @@ enum { #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */

/** - * struct i2c_spec_values: + * struct i2c_spec_values - I2C specification values for various modes * @min_hold_start_ns: min hold time (repeated) START condition * @min_low_ns: min LOW period of the SCL clock * @min_high_ns: min HIGH period of the SCL cloc @@ -136,7 +136,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = { };

/** - * struct rk3x_i2c_calced_timings: + * struct rk3x_i2c_calced_timings - calculated V1 timings * @div_low: Divider output for low * @div_high: Divider output for high * @tuning: Used to adjust setup/hold data time, @@ -159,7 +159,7 @@ enum rk3x_i2c_state { };

/** - * struct rk3x_i2c_soc_data: + * struct rk3x_i2c_soc_data - SOC-specific data * @grf_offset: offset inside the grf regmap for setting the i2c type * @calc_timings: Callback function for i2c timing information calculated */ @@ -239,7 +239,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c) }

/** - * Generate a START condition, which triggers a REG_INT_START interrupt. + * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt. + * @i2c: target controller data */ static void rk3x_i2c_start(struct rk3x_i2c *i2c) { @@ -258,8 +259,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c) }

/** - * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. - * + * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt. + * @i2c: target controller data * @error: Error code to return in rk3x_i2c_xfer */ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) @@ -298,7 +299,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) }

/** - * Setup a read according to i2c->msg + * rk3x_i2c_prepare_read - Setup a read according to i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) { @@ -329,7 +331,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) }

/** - * Fill the transmit buffer with data from i2c->msg + * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) { @@ -532,11 +535,10 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id) }

/** - * Get timing values of I2C specification - * + * rk3x_i2c_get_spec - Get timing values of I2C specification * @speed: Desired SCL frequency * - * Returns: Matched i2c spec values. + * Return: Matched i2c_spec_values. */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { @@ -549,13 +551,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) }

/** - * Calculate divider values for desired SCL frequency - * + * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ @@ -710,13 +711,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, }

/** - * Calculate timing values for desired SCL frequency - * + * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. * The following formulas are v1's method to calculate timings. @@ -960,14 +960,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long }

/** - * Setup I2C registers for an I2C operation specified by msgs, num. - * - * Must be called with i2c->lock held. - * + * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num. + * @i2c: target controller data * @msgs: I2C msgs to process * @num: Number of msgs * - * returns: Number of I2C msgs processed or negative in case of error + * Must be called with i2c->lock held. + * + * Return: Number of I2C msgs processed or negative in case of error */ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) {

From: Hyunwoo Kim v4bel@theori.io

[ Upstream commit f2b0b5210f67c56a3bcdf92ff665fb285d6e0067 ]

When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it.

This creates a child socket with the sk of the parent x25 socket, which can cause confusion.

Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue.

Signed-off-by: Hyunwoo Kim v4bel@theori.io Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/x25/af_x25.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index d231d4620c38..161dc194e634 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -492,6 +492,12 @@ static int x25_listen(struct socket *sock, int backlog) int rc = -EOPNOTSUPP;

lock_sock(sk); + if (sock->state != SS_UNCONNECTED) { + rc = -EINVAL; + release_sock(sk); + return rc; + } + if (sk->sk_state != TCP_LISTEN) { memset(&x25_sk(sk)->dest_addr, 0, X25_ADDR_LEN); sk->sk_max_ack_backlog = backlog;