Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort:
Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
Cc: stable@vger.kernel.org Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org --- drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ff7456be9d6d..89a1e7a4fe5d 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev) } }
+ dspi->clk = devm_clk_get(&pdev->dev, "dspi"); + if (IS_ERR(dspi->clk)) { + ret = PTR_ERR(dspi->clk); + dev_err(&pdev->dev, "unable to get clock\n"); + goto out_master_put; + } + ret = clk_prepare_enable(dspi->clk); + if (ret) + goto out_master_put; + dspi_init(dspi); dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq < 0) { dev_err(&pdev->dev, "can't get platform irq\n"); ret = dspi->irq; - goto out_master_put; + goto out_clk_put; }
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0, pdev->name, dspi); if (ret < 0) { dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); - goto out_master_put; - } - - dspi->clk = devm_clk_get(&pdev->dev, "dspi"); - if (IS_ERR(dspi->clk)) { - ret = PTR_ERR(dspi->clk); - dev_err(&pdev->dev, "unable to get clock\n"); - goto out_master_put; + goto out_clk_put; } - ret = clk_prepare_enable(dspi->clk); - if (ret) - goto out_master_put;
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { ret = dspi_request_dma(dspi, res->start);
The patch
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From d8ffee2f551a627ffb7b216e2da322cb9a037f77 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski krzk@kernel.org Date: Fri, 29 Jun 2018 13:33:09 +0200 Subject: [PATCH] spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe
Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort:
Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
Cc: stable@vger.kernel.org Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Mark Brown broonie@kernel.org --- drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ff7456be9d6d..89a1e7a4fe5d 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev) } }
+ dspi->clk = devm_clk_get(&pdev->dev, "dspi"); + if (IS_ERR(dspi->clk)) { + ret = PTR_ERR(dspi->clk); + dev_err(&pdev->dev, "unable to get clock\n"); + goto out_master_put; + } + ret = clk_prepare_enable(dspi->clk); + if (ret) + goto out_master_put; + dspi_init(dspi); dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq < 0) { dev_err(&pdev->dev, "can't get platform irq\n"); ret = dspi->irq; - goto out_master_put; + goto out_clk_put; }
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0, pdev->name, dspi); if (ret < 0) { dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); - goto out_master_put; - } - - dspi->clk = devm_clk_get(&pdev->dev, "dspi"); - if (IS_ERR(dspi->clk)) { - ret = PTR_ERR(dspi->clk); - dev_err(&pdev->dev, "unable to get clock\n"); - goto out_master_put; + goto out_clk_put; } - ret = clk_prepare_enable(dspi->clk); - if (ret) - goto out_master_put;
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { ret = dspi_request_dma(dspi, res->start);
On 29.06.2018 13:33, Krzysztof Kozlowski wrote:
Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort:
Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>](driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
Cc: stable@vger.kernel.org Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
Reviewed-by: Stefan Agner stefan@agner.ch
Up until commit d2233325e5b7 ("spi: spi-fsl-dspi: remove clk reference when regmap_mmio initialize") regmap with clocks has been used. I guess an alternative would have been to use this again, but I guess this has been dropped for good reasons.
-- Stefan
drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index ff7456be9d6d..89a1e7a4fe5d 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev) } }
- dspi->clk = devm_clk_get(&pdev->dev, "dspi");
- if (IS_ERR(dspi->clk)) {
ret = PTR_ERR(dspi->clk);dev_err(&pdev->dev, "unable to get clock\n");goto out_master_put;- }
- ret = clk_prepare_enable(dspi->clk);
- if (ret)
goto out_master_put;- dspi_init(dspi); dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq < 0) { dev_err(&pdev->dev, "can't get platform irq\n"); ret = dspi->irq;
goto out_master_put;
goto out_clk_put;ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0, pdev->name, dspi); if (ret < 0) { dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
goto out_master_put;- }
- dspi->clk = devm_clk_get(&pdev->dev, "dspi");
- if (IS_ERR(dspi->clk)) {
ret = PTR_ERR(dspi->clk);dev_err(&pdev->dev, "unable to get clock\n");goto out_master_put;
goto out_clk_put;
- ret = clk_prepare_enable(dspi->clk);
- if (ret)
goto out_master_put;if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { ret = dspi_request_dma(dspi, res->start);
linux-stable-mirror@lists.linaro.org
-
Krzysztof Kozlowski -
Mark Brown -
Stefan Agner