The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8e83622ae7ca481c76c8fd9579877f6abae64ca2 Mon Sep 17 00:00:00 2001 From: Johan Hovold johan@kernel.org Date: Wed, 31 Aug 2022 10:15:24 +0200 Subject: [PATCH] USB: serial: ch341: fix lost character on LCR updates

Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these devices either.

Reported-by: Jonathan Woithe jwoithe@just42.net Tested-by: Jonathan Woithe jwoithe@just42.net Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold johan@kernel.org

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2798fca71261..2bcce172355b 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -97,7 +97,10 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; + u8 version; + unsigned long break_end; };

@@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, * (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr); if (r) @@ -308,7 +314,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r) return r; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);

r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0)