Richard Jones has reported that using med_power_with_dipm on a T450s with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is causing the machine to hang.

Switching the LPM to max_performance fixes this, so it seems that this Sandisk SSD does not handle LPM well.

Note in the past there have been bug-reports about the following Sandisk models not working with min_power, so we may need to extend the quirk list in the future: name - firmware Sandisk SD6SB2M512G1022I - X210400 Sandisk SD6PP4M-256G-1006 - A200906

Cc: stable@vger.kernel.org Cc: Richard W.M. Jones rjones@redhat.com Reported-and-tested-by: Richard W.M. Jones rjones@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6e400ff2b5db..68596bd4cf06 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4552,6 +4552,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* This specific Samsung model/firmware-rev does not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },

+ /* Sandisk devices which are known to not handle LPM well */ + { "SanDisk SD7UB3Q*G1001", NULL, ATA_HORKAGE_NOLPM, }, + /* devices that don't properly handle queued TRIM commands */ { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, },