From: Francesco Dolcini francesco.dolcini@toradex.com

This reverts commit 34253084291cb210b251d64657958b8041ce4ab1.

That commit introduces a regression, when HT40 mode is enabled, received packets are lost, this was experience with W8997 with both SDIO-UART and SDIO-SDIO variants. From an initial investigation the issue solves on its own after some time, but it's not clear what is the reason. Given that this was just a performance optimization, let's revert it till we have a better understanding of the issue and a proper fix.

Cc: Jeff Chen jeff.chen_1@nxp.com Cc: stable@vger.kernel.org Fixes: 34253084291c ("wifi: mwifiex: Fix HT40 bandwidth issue.") Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/ Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com --- drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c index 738bafc3749b..66f0f5377ac1 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n.c +++ b/drivers/net/wireless/marvell/mwifiex/11n.c @@ -403,14 +403,12 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,

if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && bss_desc->bcn_ht_oper->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) { - chan_list->chan_scan_param[0].radio_type |= - CHAN_BW_40MHZ << 2; + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type, (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET)); - } + *buffer += struct_size(chan_list, chan_scan_param, 1); ret_len += struct_size(chan_list, chan_scan_param, 1); }