The patch below does not apply to the 5.2-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 14ced7e3a1ae9bed7051df3718c8c7b583854a5c Mon Sep 17 00:00:00 2001

From: Bjorn Andersson bjorn.andersson@linaro.org Date: Mon, 5 Aug 2019 17:42:56 -0700 Subject: [PATCH] phy: qcom-qmp: Correct ready status, again

Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") I failed to conclude that the PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as the PHY gets ready. Similar to the prior bug with UFS the code will generally get past the check before the transition and thereby "succeed".

Correct the name of the register used PCIe and USB3 PHYs, replace mask_pcs_ready with a constant expression depending on the type of the PHY and check for the appropriate ready state.

Cc: stable@vger.kernel.org Cc: Vivek Gautam vivek.gautam@codeaurora.org Cc: Evan Green evgreen@chromium.org Cc: Niklas Cassel niklas.cassel@linaro.org Reported-by: Marc Gonzalez marc.w.gonzalez@free.fr Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Tested-by: Marc Gonzalez marc.w.gonzalez@free.fr Signed-off-by: Kishon Vijay Abraham I kishon@ti.com

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e7b8283acce8..39e8deb8001e 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -35,7 +35,7 @@ #define PLL_READY_GATE_EN BIT(3) /* QPHY_PCS_STATUS bit */ #define PHYSTATUS BIT(6) -/* QPHY_COM_PCS_READY_STATUS bit */ +/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */ #define PCS_READY BIT(0)

/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */ @@ -115,6 +115,7 @@ enum qphy_reg_layout { QPHY_SW_RESET, QPHY_START_CTRL, QPHY_PCS_READY_STATUS, + QPHY_PCS_STATUS, QPHY_PCS_AUTONOMOUS_MODE_CTRL, QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, QPHY_PCS_LFPS_RXTERM_IRQ_STATUS, @@ -133,7 +134,7 @@ static const unsigned int pciephy_regs_layout[] = { [QPHY_FLL_MAN_CODE] = 0xd4, [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_READY_STATUS] = 0x174, + [QPHY_PCS_STATUS] = 0x174, };

static const unsigned int usb3phy_regs_layout[] = { @@ -144,7 +145,7 @@ static const unsigned int usb3phy_regs_layout[] = { [QPHY_FLL_MAN_CODE] = 0xd0, [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_READY_STATUS] = 0x17c, + [QPHY_PCS_STATUS] = 0x17c, [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4, [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8, [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178, @@ -153,7 +154,7 @@ static const unsigned int usb3phy_regs_layout[] = { static const unsigned int qmp_v3_usb3phy_regs_layout[] = { [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_READY_STATUS] = 0x174, + [QPHY_PCS_STATUS] = 0x174, [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, @@ -911,7 +912,6 @@ struct qmp_phy_cfg {

unsigned int start_ctrl; unsigned int pwrdn_ctrl; - unsigned int mask_pcs_ready; unsigned int mask_com_pcs_ready;

/* true, if PHY has a separate PHY_COM control block */ @@ -1074,7 +1074,6 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {

.start_ctrl = PCS_START | PLL_READY_GATE_EN, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, - .mask_pcs_ready = PHYSTATUS, .mask_com_pcs_ready = PCS_READY,

.has_phy_com_ctrl = true, @@ -1106,7 +1105,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, - .mask_pcs_ready = PHYSTATUS, };

/* list of resets */ @@ -1136,7 +1134,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, - .mask_pcs_ready = PHYSTATUS,

.has_phy_com_ctrl = false, .has_lane_rst = false, @@ -1167,7 +1164,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, - .mask_pcs_ready = PHYSTATUS,

.has_pwrdn_delay = true, .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, @@ -1199,7 +1195,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, - .mask_pcs_ready = PHYSTATUS,

.has_pwrdn_delay = true, .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, @@ -1226,7 +1221,6 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {

.start_ctrl = SERDES_START, .pwrdn_ctrl = SW_PWRDN, - .mask_pcs_ready = PCS_READY,

.is_dual_lane_phy = true, .no_pcs_sw_reset = true, @@ -1254,7 +1248,6 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, - .mask_pcs_ready = PHYSTATUS, };

static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { @@ -1279,7 +1272,6 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {

.start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN, - .mask_pcs_ready = PHYSTATUS,

.is_dual_lane_phy = true, }; @@ -1457,7 +1449,7 @@ static int qcom_qmp_phy_enable(struct phy *phy) void __iomem *pcs = qphy->pcs; void __iomem *dp_com = qmp->dp_com; void __iomem *status; - unsigned int mask, val; + unsigned int mask, val, ready; int ret;

dev_vdbg(qmp->dev, "Initializing QMP phy\n"); @@ -1545,10 +1537,17 @@ static int qcom_qmp_phy_enable(struct phy *phy) /* start SerDes and Phy-Coding-Sublayer */ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);

- status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = cfg->mask_pcs_ready; + if (cfg->type == PHY_TYPE_UFS) { + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = PCS_READY; + ready = PCS_READY; + } else { + status = pcs + cfg->regs[QPHY_PCS_STATUS]; + mask = PHYSTATUS; + ready = 0; + }

- ret = readl_poll_timeout(status, val, val & mask, 10, + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, PHY_INIT_COMPLETE_TIMEOUT); if (ret) { dev_err(qmp->dev, "phy initialization timed-out\n");