From: Heiko Thiery heiko.thiery@gmail.com

[ Upstream commit 6a4d7234ae9a3bb31181f348ade9bbdb55aeb5c5 ]

When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'.

Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900 the igp clock is disabled when the interface is down and leads to a system hang.

So we check if the ptp clock status before reading the timecounter register.

Signed-off-by: Heiko Thiery heiko.thiery@gmail.com Acked-by: Richard Cochran richardcochran@gmail.com Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec_ptp.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 6ebad3fac81d..e63df6455fba 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -396,9 +396,16 @@ static int fec_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) u64 ns; unsigned long flags;

+ mutex_lock(&adapter->ptp_clk_mutex); + /* Check the ptp clock */ + if (!adapter->ptp_clk_on) { + mutex_unlock(&adapter->ptp_clk_mutex); + return -EINVAL; + } spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_read(&adapter->tc); spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + mutex_unlock(&adapter->ptp_clk_mutex);

*ts = ns_to_timespec64(ns);

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit 4deb550bc3b698a1f03d0332cde3df154d1b6c1e ]

label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen.

In order to fix this issue, don't call phy->stop() in label err_eni_release

[ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ==================================================================

Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/eni.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index ba549d945479..ffe519663687 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -2279,7 +2279,8 @@ static int eni_init_one(struct pci_dev *pci_dev, return rc;

err_eni_release: - eni_do_release(dev); + dev->phy = NULL; + iounmap(ENI_DEV(dev)->ioaddr); err_unregister: atm_dev_deregister(dev); err_free_consistent:

From: Hayes Wang hayeswang@realtek.com

[ Upstream commit 4b5dc1a94d4f92b5845e98bd9ae344b26d933aad ]

This reverts commit 134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8.

The r8153_mac_clk_spd() is used for RTL8153A only, because the register table of RTL8153B is different from RTL8153A. However, this function would be called when RTL8153B calls r8153_first_init() and r8153_enter_oob(). That causes RTL8153B becomes unstable when suspending and resuming. The worst case may let the device stop working.

Besides, revert this commit to disable MAC clock speed down for RTL8153A. It would avoid the known issue when enabling U1. The data of the first control transfer may be wrong when exiting U1.

Signed-off-by: Hayes Wang hayeswang@realtek.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/r8152.c | 35 ++++++----------------------------- 1 file changed, 6 insertions(+), 29 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index bd91d4bad49b..f9c531a6ce06 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2588,29 +2588,6 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) device_set_wakeup_enable(&tp->udev->dev, false); }

-static void r8153_mac_clk_spd(struct r8152 *tp, bool enable) -{ - /* MAC clock speed down */ - if (enable) { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, - ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, - EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | EEE_SPDWN_EN | - TP1000_SPDWN_EN); - } else { - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); - } -} - static void r8153_u1u2en(struct r8152 *tp, bool enable) { u8 u1u2[8]; @@ -2841,11 +2818,9 @@ static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) if (enable) { r8153_u1u2en(tp, false); r8153_u2p3en(tp, false); - r8153_mac_clk_spd(tp, true); rtl_runtime_suspend_enable(tp, true); } else { rtl_runtime_suspend_enable(tp, false); - r8153_mac_clk_spd(tp, false);

switch (tp->version) { case RTL_VER_03: @@ -3407,7 +3382,6 @@ static void r8153_first_init(struct r8152 *tp) u32 ocp_data; int i;

- r8153_mac_clk_spd(tp, false); rxdy_gated_en(tp, true); r8153_teredo_off(tp);

@@ -3469,8 +3443,6 @@ static void r8153_enter_oob(struct r8152 *tp) u32 ocp_data; int i;

- r8153_mac_clk_spd(tp, true); - ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); @@ -4134,9 +4106,14 @@ static void r8153_init(struct r8152 *tp)

ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);

+ /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); + r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev);

/* rx aggregation */

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 38c26ff3048af50eee3fcd591921357ee5bfd9ee ]

When bdx_read_mac() fails, no error return code of bdx_probe() is assigned. To fix this bug, err is assigned with -EFAULT as error return code.

Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/tehuti/tehuti.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 163d8d16bc24..75620c3365b3 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -2058,6 +2058,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /*bdx_hw_reset(priv); */ if (bdx_read_mac(priv)) { pr_err("load MAC address failed\n"); + err = -EFAULT; goto err_out_iomap; } SET_NETDEV_DEV(ndev, &pdev->dev);

From: Yang Li yang.lee@linux.alibaba.com

[ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ]

fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT

Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT

Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Yang Li yang.lee@linux.alibaba.com Acked-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 7c06f4541c5d..ab5de5196080 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -234,7 +234,7 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, int ret, value;

ret = request_threaded_irq(event->irq, NULL, event->handler, - event->irqflags, "ACPI:Event", event); + event->irqflags | IRQF_ONESHOT, "ACPI:Event", event); if (ret) { dev_err(acpi_gpio->chip->parent, "Failed to setup interrupt handler for %d\n",

From: Frank Sorenson sorenson@redhat.com

[ Upstream commit ad3dbe35c833c2d4d0bbf3f04c785d32f931e7c9 ]

CREATE requests return a post_op_fh3, rather than nfs_fh3. The post_op_fh3 includes an extra word to indicate 'handle_follows'.

Without that additional word, create fails when full 64-byte filehandles are in use.

Add NFS3_post_op_fh_sz, and correct the size calculation for NFS3_createres_sz.

Signed-off-by: Frank Sorenson sorenson@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs3xdr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index f1cb0b7eb05f..be666aee28cc 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -34,6 +34,7 @@ */ #define NFS3_fhandle_sz (1+16) #define NFS3_fh_sz (NFS3_fhandle_sz) /* shorthand */ +#define NFS3_post_op_fh_sz (1+NFS3_fh_sz) #define NFS3_sattr_sz (15) #define NFS3_filename_sz (1+(NFS3_MAXNAMLEN>>2)) #define NFS3_path_sz (1+(NFS3_MAXPATHLEN>>2)) @@ -71,7 +72,7 @@ #define NFS3_readlinkres_sz (1+NFS3_post_op_attr_sz+1) #define NFS3_readres_sz (1+NFS3_post_op_attr_sz+3) #define NFS3_writeres_sz (1+NFS3_wcc_data_sz+4) -#define NFS3_createres_sz (1+NFS3_fh_sz+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) +#define NFS3_createres_sz (1+NFS3_post_op_fh_sz+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) #define NFS3_renameres_sz (1+(2 * NFS3_wcc_data_sz)) #define NFS3_linkres_sz (1+NFS3_post_op_attr_sz+NFS3_wcc_data_sz) #define NFS3_readdirres_sz (1+NFS3_post_op_attr_sz+2)

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 62765d39553cfd1ad340124fe1e280450e8c89e2 ]

When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of uhdlc_init() is assigned. To fix this bug, ret is assigned with -ENOMEM in these cases.

Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/fsl_ucc_hdlc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index 6a26cef62193..978f642daced 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -200,13 +200,17 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)

priv->rx_skbuff = kzalloc(priv->rx_ring_size * sizeof(*priv->rx_skbuff), GFP_KERNEL); - if (!priv->rx_skbuff) + if (!priv->rx_skbuff) { + ret = -ENOMEM; goto free_ucc_pram; + }

priv->tx_skbuff = kzalloc(priv->tx_ring_size * sizeof(*priv->tx_skbuff), GFP_KERNEL); - if (!priv->tx_skbuff) + if (!priv->tx_skbuff) { + ret = -ENOMEM; goto free_rx_skbuff; + }

priv->skb_curtx = 0; priv->skb_dirtytx = 0;

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit 4416e98594dc04590ebc498fc4e530009535c511 ]

this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly.

Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/idt77105.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index 082aa02abc57..be3ba90b76b9 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -261,7 +261,7 @@ static int idt77105_start(struct atm_dev *dev) { unsigned long flags;

- if (!(dev->dev_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL))) + if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL))) return -ENOMEM; PRIV(dev)->dev = dev; spin_lock_irqsave(&idt77105_priv_lock, flags); @@ -338,7 +338,7 @@ static int idt77105_stop(struct atm_dev *dev) else idt77105_all = walk->next; dev->phy = NULL; - dev->dev_data = NULL; + dev->phy_data = NULL; kfree(walk); break; }

From: Peter Zijlstra peterz@infradead.org

[ Upstream commit d5b0e0677bfd5efd17c5bbb00156931f0d41cb85 ]

Jakub reported that:

static struct net_device *rtl8139_init_board(struct pci_dev *pdev) { ... u64_stats_init(&tp->rx_stats.syncp); u64_stats_init(&tp->tx_stats.syncp); ... }

results in lockdep getting confused between the RX and TX stats lock. This is because u64_stats_init() is an inline calling seqcount_init(), which is a macro using a static variable to generate a lockdep class.

By wrapping that in an inline, we negate the effect of the macro and fold the static key variable, hence the confusion.

Fix by also making u64_stats_init() a macro for the case where it matters, leaving the other case an inline for argument validation etc.

Reported-by: Jakub Kicinski kuba@kernel.org Debugged-by: "Ahmed S. Darwish" a.darwish@linutronix.de Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: "Erhard F." erhard_f@mailbox.org Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/u64_stats_sync.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/linux/u64_stats_sync.h b/include/linux/u64_stats_sync.h index 07ee0f84a46c..eb0a2532eb6f 100644 --- a/include/linux/u64_stats_sync.h +++ b/include/linux/u64_stats_sync.h @@ -69,12 +69,13 @@ struct u64_stats_sync { };

+#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) +#define u64_stats_init(syncp) seqcount_init(&(syncp)->seq) +#else static inline void u64_stats_init(struct u64_stats_sync *syncp) { -#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) - seqcount_init(&syncp->seq); -#endif } +#endif

static inline void u64_stats_update_begin(struct u64_stats_sync *syncp) {

From: J. Bruce Fields bfields@redhat.com

[ Upstream commit 4f8be1f53bf615102d103c0509ffa9596f65b718 ]

The NFSv4 protocol doesn't have any notion of reomoving an attribute, so removexattr(path,"system.nfs4_acl") doesn't make sense.

There's no documented return value. Arguably it could be EOPNOTSUPP but I'm a little worried an application might take that to mean that we don't support ACLs or xattrs. How about EINVAL?

Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 7f50767af46b..e053fd7f83d8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5255,6 +5255,9 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE); int ret, i;

+ /* You can't remove system.nfs4_acl: */ + if (buflen == 0) + return -EINVAL; if (!nfs4_server_supports_acls(server)) return -EOPNOTSUPP; if (npages > ARRAY_SIZE(pages))

From: Sergei Trofimovich slyfox@gentoo.org

[ Upstream commit 61bf318eac2c13356f7bd1c6a05421ef504ccc8a ]

In https://bugs.gentoo.org/769614 Dmitry noticed that `ptrace(PTRACE_GET_SYSCALL_INFO)` does not return error sign properly.

The bug is in mismatch between get/set errors:

static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { return regs->r10 == -1 ? regs->r8:0; }

static inline long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) { return regs->r8; }

static inline void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, int error, long val) { if (error) { /* error < 0, but ia64 uses > 0 return value */ regs->r8 = -error; regs->r10 = -1; } else { regs->r8 = val; regs->r10 = 0; } }

Tested on v5.10 on rx3600 machine (ia64 9040 CPU).

Link: https://lkml.kernel.org/r/20210221002554.333076-2-slyfox@gentoo.org Link: https://bugs.gentoo.org/769614 Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Reported-by: Dmitry V. Levin ldv@altlinux.org Reviewed-by: Dmitry V. Levin ldv@altlinux.org Cc: John Paul Adrian Glaubitz glaubitz@physik.fu-berlin.de Cc: Oleg Nesterov oleg@redhat.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/include/asm/syscall.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h index 1d0b875fec44..ec909eec0b4c 100644 --- a/arch/ia64/include/asm/syscall.h +++ b/arch/ia64/include/asm/syscall.h @@ -35,7 +35,7 @@ static inline void syscall_rollback(struct task_struct *task, static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { - return regs->r10 == -1 ? regs->r8:0; + return regs->r10 == -1 ? -regs->r8:0; }

static inline long syscall_get_return_value(struct task_struct *task,

From: Phillip Lougher phillip@squashfs.org.uk

commit 8b44ca2b634527151af07447a8090a5f3a043321 upstream.

The checks for maximum metadata block size is missing SQUASHFS_BLOCK_OFFSET (the two byte length count).

Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.c... Fixes: f37aa4c7366e23f ("squashfs: add more sanity checks in id lookup") Signed-off-by: Phillip Lougher phillip@squashfs.org.uk Cc: Sean Nyekjaer sean@geanix.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/squashfs/id.c | 6 ++++-- fs/squashfs/xattr_id.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-)

--- a/fs/squashfs/id.c +++ b/fs/squashfs/id.c @@ -110,14 +110,16 @@ __le64 *squashfs_read_id_index_table(str start = le64_to_cpu(table[n]); end = le64_to_cpu(table[n + 1]);

- if (start >= end || (end - start) > SQUASHFS_METADATA_SIZE) { + if (start >= end || (end - start) > + (SQUASHFS_METADATA_SIZE + SQUASHFS_BLOCK_OFFSET)) { kfree(table); return ERR_PTR(-EINVAL); } }

start = le64_to_cpu(table[indexes - 1]); - if (start >= id_table_start || (id_table_start - start) > SQUASHFS_METADATA_SIZE) { + if (start >= id_table_start || (id_table_start - start) > + (SQUASHFS_METADATA_SIZE + SQUASHFS_BLOCK_OFFSET)) { kfree(table); return ERR_PTR(-EINVAL); } --- a/fs/squashfs/xattr_id.c +++ b/fs/squashfs/xattr_id.c @@ -122,14 +122,16 @@ __le64 *squashfs_read_xattr_id_table(str start = le64_to_cpu(table[n]); end = le64_to_cpu(table[n + 1]);

- if (start >= end || (end - start) > SQUASHFS_METADATA_SIZE) { + if (start >= end || (end - start) > + (SQUASHFS_METADATA_SIZE + SQUASHFS_BLOCK_OFFSET)) { kfree(table); return ERR_PTR(-EINVAL); } }

start = le64_to_cpu(table[indexes - 1]); - if (start >= table_start || (table_start - start) > SQUASHFS_METADATA_SIZE) { + if (start >= table_start || (table_start - start) > + (SQUASHFS_METADATA_SIZE + SQUASHFS_BLOCK_OFFSET)) { kfree(table); return ERR_PTR(-EINVAL); }

From: Horia Geantă horia.geanta@nxp.com

commit ba8da03fa7dff59d9400250aebd38f94cde3cb0f upstream.

Crypto engine (CAAM) on LS1012A platform is configured HW-coherent, mark accordingly the DT node.

Lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, similar to what has been reported for LS1046A.

Cc: stable@vger.kernel.org # v4.12+ Fixes: 85b85c569507 ("arm64: dts: ls1012a: add crypto node") Signed-off-by: Horia Geantă horia.geanta@nxp.com Acked-by: Li Yang leoyang.li@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 + 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -164,6 +164,7 @@ ranges = <0x0 0x00 0x1700000 0x100000>; reg = <0x00 0x1700000 0x0 0x100000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent;

sec_jr0: jr@10000 { compatible = "fsl,sec-v5.4-job-ring",

From: Claudiu Beznea claudiu.beznea@microchip.com

commit 221c3a09ddf70a0a51715e6c2878d8305e95c558 upstream.

Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No connection established if phy address 0 is used.

The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at reset, connected to PD09 of the MPU it's connected with an internal pull-up forming PHYAD[2:0] = 7.

Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Fixes: 2f61929eb10a ("ARM: dts: at91: at91-sama5d27_som1: fix PHY ID") Cc: Ludovic Desroches ludovic.desroches@microchip.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -67,8 +67,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii";

- ethernet-phy@0 { - reg = <0x0>; + ethernet-phy@7 { + reg = <0x7>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default";

From: Grygorii Strashko grygorii.strashko@ti.com

[ Upstream commit 7d7275b3e866cf8092bd12553ec53ba26864f7bb ]

The main purpose of l3 IRQs is to catch OCP bus access errors and identify corresponding code places by showing call stack, so it's important to handle L3 interconnect errors as fast as possible. On RT these IRQs will became threaded and will be scheduled much more late from the moment actual error occurred so showing completely useless information.

Hence, mark l3 IRQs as IRQF_NO_THREAD so they will not be forced threaded on RT or if force_irqthreads = true.

Fixes: 0ee7261c9212 ("drivers: bus: Move the OMAP interconnect driver to drivers/bus/") Signed-off-by: Grygorii Strashko grygorii.strashko@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/omap_l3_noc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 5012e3ad1225..624f74d03a83 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -285,7 +285,7 @@ static int omap_l3_probe(struct platform_device *pdev) */ l3->debug_irq = platform_get_irq(pdev, 0); ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, - 0x0, "l3-dbg-irq", l3); + IRQF_NO_THREAD, "l3-dbg-irq", l3); if (ret) { dev_err(l3->dev, "request_irq failed for %d\n", l3->debug_irq); @@ -294,7 +294,7 @@ static int omap_l3_probe(struct platform_device *pdev)

l3->app_irq = platform_get_irq(pdev, 1); ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, - 0x0, "l3-app-irq", l3); + IRQF_NO_THREAD, "l3-app-irq", l3); if (ret) dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);

From: Eric Dumazet edumazet@google.com

[ Upstream commit dd4fa1dae9f4847cc1fd78ca468ad69e16e5db3e ]

macvlan_count_rx() can be called from process context, it is thus necessary to disable preemption before calling u64_stats_update_begin()

syzbot was able to spot this on 32bit arch:

WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline] WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269 Modules linked in: Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: ARM-Versatile Express Workqueue: events macvlan_process_broadcast Backtrace: [<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252) r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4 [<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline]) [<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120) [<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231) r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0 [<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605) r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4 r7:0000010f [<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628) r7:81363f70 r6:0000010f r5:83018e50 r4:00000000 [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline]) [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269) r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001 [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291) r5:89802300 r4:8a927740 [<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317) r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000 r4:89802840 [<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275) r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80 r4:8a86d43c [<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421) r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40 r4:898dac80 [<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292) r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40 r4:8a97bd00 [<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158) Exception stack(0x8a9c7fb0 to 0x8a9c7ff8)

Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Herbert Xu herbert@gondor.apana.org.au Reported-by: syzbot syzkaller@googlegroups.com Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/if_macvlan.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h index 0e2c60efad2d..55a1d3260589 100644 --- a/include/linux/if_macvlan.h +++ b/include/linux/if_macvlan.h @@ -58,13 +58,14 @@ static inline void macvlan_count_rx(const struct macvlan_dev *vlan, if (likely(success)) { struct vlan_pcpu_stats *pcpu_stats;

- pcpu_stats = this_cpu_ptr(vlan->pcpu_stats); + pcpu_stats = get_cpu_ptr(vlan->pcpu_stats); u64_stats_update_begin(&pcpu_stats->syncp); pcpu_stats->rx_packets++; pcpu_stats->rx_bytes += len; if (multicast) pcpu_stats->rx_multicast++; u64_stats_update_end(&pcpu_stats->syncp); + put_cpu_ptr(vlan->pcpu_stats); } else { this_cpu_inc(vlan->pcpu_stats->rx_errors); }

From: Vitaly Lifshits vitaly.lifshits@intel.com

[ Upstream commit 21f857f0321d0d0ea9b1a758bd55dc63d1cb2437 ]

A possible race condition was found in e1000_reset_task, after discovering a similar issue in igb driver via commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock").

Added rtnl_lock() and rtnl_unlock() to avoid this.

Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Suggested-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Vitaly Lifshits vitaly.lifshits@intel.com Tested-by: Dvora Fuxbrumer dvorax.fuxbrumer@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index fff55f0bed30..f50d0da8fefe 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5942,15 +5942,19 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task);

+ rtnl_lock(); /* don't run the task if already down */ - if (test_bit(__E1000_DOWN, &adapter->state)) + if (test_bit(__E1000_DOWN, &adapter->state)) { + rtnl_unlock(); return; + }

if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); + rtnl_unlock(); }

/**

From: Lv Yunlong lyl2019@mail.ustc.edu.cn

[ Upstream commit db74623a3850db99cb9692fda9e836a56b74198d ]

In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by vfree(). But unfortunately, it is used when extended is true.

Fixes: 7061b2bdd620e ("qlogic: Deletion of unnecessary checks before two function calls") Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index f34ae8c75bc5..61a39d167c8b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -1426,6 +1426,7 @@ void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter)

if (fw_dump->tmpl_hdr == NULL || current_version > prev_version) { vfree(fw_dump->tmpl_hdr); + fw_dump->tmpl_hdr = NULL;

if (qlcnic_83xx_md_check_extended_dump_capability(adapter)) extended = !qlcnic_83xx_extend_md_capab(adapter); @@ -1444,6 +1445,8 @@ void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter) struct qlcnic_83xx_dump_template_hdr *hdr;

hdr = fw_dump->tmpl_hdr; + if (!hdr) + return; hdr->drv_cap_mask = 0x1f; fw_dump->cap_mask = 0x1f; dev_info(&pdev->dev,

From: Stephane Grosjean s.grosjean@peak-system.com

[ Upstream commit 59ec7b89ed3e921cd0625a8c83f31a30d485fdf8 ]

Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices.

Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 0d762bdac4f8..56280a28e135 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -26,6 +26,8 @@

MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter"); MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); +MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-Chip USB"); +MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB X6 adapter");

#define PCAN_USBPROFD_CHANNEL_COUNT 2 #define PCAN_USBFD_CHANNEL_COUNT 1

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit 6e2fe01dd6f98da6cae8b07cd5cfa67abc70d97d ]

Currently doing modprobe c_can_pci will make the kernel complain:

Unbalanced pm_runtime_enable!

this is caused by pm_runtime_enable() called before pm is initialized.

This fix is similar to 227619c3ff7c, move those pm_enable/disable code to c_can_platform.

Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller") Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com Signed-off-by: Tong Zhang ztong0001@gmail.com Tested-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/c_can/c_can.c | 24 +----------------------- drivers/net/can/c_can/c_can_platform.c | 6 +++++- 2 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 24c6015f6c92..2278c5fff5c6 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = { .brp_inc = 1, };

-static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv) -{ - if (priv->device) - pm_runtime_enable(priv->device); -} - -static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv) -{ - if (priv->device) - pm_runtime_disable(priv->device); -} - static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv) { if (priv->device) @@ -1318,7 +1306,6 @@ static const struct net_device_ops c_can_netdev_ops = {

int register_c_can_dev(struct net_device *dev) { - struct c_can_priv *priv = netdev_priv(dev); int err;

/* Deactivate pins to prevent DRA7 DCAN IP from being @@ -1328,28 +1315,19 @@ int register_c_can_dev(struct net_device *dev) */ pinctrl_pm_select_sleep_state(dev->dev.parent);

- c_can_pm_runtime_enable(priv); - dev->flags |= IFF_ECHO; /* we support local echo */ dev->netdev_ops = &c_can_netdev_ops;

err = register_candev(dev); - if (err) - c_can_pm_runtime_disable(priv); - else + if (!err) devm_can_led_init(dev); - return err; } EXPORT_SYMBOL_GPL(register_c_can_dev);

void unregister_c_can_dev(struct net_device *dev) { - struct c_can_priv *priv = netdev_priv(dev); - unregister_candev(dev); - - c_can_pm_runtime_disable(priv); } EXPORT_SYMBOL_GPL(unregister_c_can_dev);

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index b5145a7f874c..f2b0408ce87d 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -29,6 +29,7 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/clk.h> #include <linux/of.h> #include <linux/of_device.h> @@ -385,6 +386,7 @@ static int c_can_plat_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev);

+ pm_runtime_enable(priv->device); ret = register_c_can_dev(dev); if (ret) { dev_err(&pdev->dev, "registering %s failed (err=%d)\n", @@ -397,6 +399,7 @@ static int c_can_plat_probe(struct platform_device *pdev) return 0;

exit_free_device: + pm_runtime_disable(priv->device); free_c_can_dev(dev); exit: dev_err(&pdev->dev, "probe failed\n"); @@ -407,9 +410,10 @@ exit: static int c_can_plat_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); + struct c_can_priv *priv = netdev_priv(dev);

unregister_c_can_dev(dev); - + pm_runtime_disable(priv->device); free_c_can_dev(dev);

return 0;

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 1944015fe9c1d9fa5e9eb7ffbbb5ef8954d6753b ]

Coverity reported the strange "if (~...)" condition that's always true. It suggested that ! was intended instead of ~, but upon further analysis I'm convinced that what really was intended was a comparison to 0xff/0xffff (in HT/VHT cases respectively), since this indicates that all of the rates are enabled.

Change the comparison accordingly.

I'm guessing this never really mattered because a reset to not having a rate mask is basically equivalent to having a mask that enables all rates.

Reported-by: Colin Ian King colin.king@canonical.com Fixes: 2ffbe6d33366 ("mac80211: fix and optimize MCS mask handling") Fixes: b119ad6e726c ("mac80211: add rate mask logic for vht rates") Reviewed-by: Colin Ian King colin.king@canonical.com Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0b82d8da4ab0..0563bde0c285 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2752,14 +2752,14 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, continue;

for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) { - if (~sdata->rc_rateidx_mcs_mask[i][j]) { + if (sdata->rc_rateidx_mcs_mask[i][j] != 0xff) { sdata->rc_has_mcs_mask[i] = true; break; } }

for (j = 0; j < NL80211_VHT_NSS_MAX; j++) { - if (~sdata->rc_rateidx_vht_mcs_mask[i][j]) { + if (sdata->rc_rateidx_vht_mcs_mask[i][j] != 0xffff) { sdata->rc_has_vht_mcs_mask[i] = true; break; }

From: Corentin Labbe clabbe@baylibre.com

[ Upstream commit 014dfa26ce1c647af09bf506285ef67e0e3f0a6b ]

MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL) This is due to tx_fifo_size being 0, since this value is used to compute valid MTU range. Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes")) dwmac-sun8i need to have tx and rx fifo sizes set. I have used values from datasheets. After this patch, setting a non-default MTU (like 1000) value works and network is still useable.

Tested-on: sun8i-h3-orangepi-pc Tested-on: sun8i-r40-bananapi-m2-ultra Tested-on: sun50i-a64-bananapi-m64 Tested-on: sun50i-h5-nanopi-neo-plus2 Tested-on: sun50i-h6-pine-h64 Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i") Reported-by: Belisko Marek marek.belisko@gmail.com Signed-off-by: Corentin Labbe clabbe@baylibre.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 149fd0d5e069..8e60315a087c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -972,6 +972,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) plat_dat->init = sun8i_dwmac_init; plat_dat->exit = sun8i_dwmac_exit; plat_dat->setup = sun8i_dwmac_setup; + plat_dat->tx_fifo_size = 4096; + plat_dat->rx_fifo_size = 16384;

ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv); if (ret)

From: Pavel Tatashin pasha.tatashin@soleen.com

[ Upstream commit 141f8202cfa4192c3af79b6cbd68e7760bb01b5a ]

The ppos points to a position in the old kernel memory (and in case of arm64 in the crash kernel since elfcorehdr is passed as a segment). The function should update the ppos by the amount that was read. This bug is not exposed by accident, but other platforms update this value properly. So, fix it in ARM64 version of elfcorehdr_read() as well.

Signed-off-by: Pavel Tatashin pasha.tatashin@soleen.com Fixes: e62aaeac426a ("arm64: kdump: provide /proc/vmcore file") Reviewed-by: Tyler Hicks tyhicks@linux.microsoft.com Link: https://lore.kernel.org/r/20210319205054.743368-1-pasha.tatashin@soleen.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/crash_dump.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c index f46d57c31443..76905a258550 100644 --- a/arch/arm64/kernel/crash_dump.c +++ b/arch/arm64/kernel/crash_dump.c @@ -67,5 +67,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos) { memcpy(buf, phys_to_virt((phys_addr_t)*ppos), count); + *ppos += count; + return count; }

From: Potnuri Bharat Teja bharat@chelsio.com

[ Upstream commit 3408be145a5d6418ff955fe5badde652be90e700 ]

Not setting the ipv6 bit while destroying ipv6 listening servers may result in potential fatal adapter errors due to lookup engine memory hash errors. Therefore always set ipv6 field while destroying ipv6 listening servers.

Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja bharat@chelsio.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/cxgb4/cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 5aa545f9a423..72e2031993fb 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3492,13 +3492,13 @@ int c4iw_destroy_listen(struct iw_cm_id *cm_id) ep->com.local_addr.ss_family == AF_INET) { err = cxgb4_remove_server_filter( ep->com.dev->rdev.lldi.ports[0], ep->stid, - ep->com.dev->rdev.lldi.rxq_ids[0], 0); + ep->com.dev->rdev.lldi.rxq_ids[0], false); } else { struct sockaddr_in6 *sin6; c4iw_init_wr_wait(&ep->com.wr_wait); err = cxgb4_remove_server( ep->com.dev->rdev.lldi.ports[0], ep->stid, - ep->com.dev->rdev.lldi.rxq_ids[0], 0); + ep->com.dev->rdev.lldi.rxq_ids[0], true); if (err) goto done; err = c4iw_wait_for_reply(&ep->com.dev->rdev, &ep->com.wr_wait,

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit eb50aaf960e3bedfef79063411ffd670da94b84b ]

The decrementation of acpi_device_bus_id->instance_no in acpi_device_del() is incorrect, because it may cause a duplicate instance number to be allocated next time a device with the same acpi_device_bus_id is added.

Replace above mentioned approach by using IDA framework.

While at it, define the instance range to be [0, 4096).

Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device") Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: 4.10+ stable@vger.kernel.org # 4.10+ Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/internal.h | 6 +++++- drivers/acpi/scan.c | 33 ++++++++++++++++++++++++++++----- include/acpi/acpi_bus.h | 1 + 3 files changed, 34 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index e6b10aad55d5..6ac1c6b04199 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -18,6 +18,8 @@ #ifndef _ACPI_INTERNAL_H_ #define _ACPI_INTERNAL_H_

+#include <linux/idr.h> + #define PREFIX "ACPI: "

int early_acpi_osi_init(void); @@ -97,9 +99,11 @@ void acpi_scan_table_handler(u32 event, void *table, void *context);

extern struct list_head acpi_bus_id_list;

+#define ACPI_MAX_DEVICE_INSTANCES 4096 + struct acpi_device_bus_id { const char *bus_id; - unsigned int instance_no; + struct ida instance_ida; struct list_head node; };

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 9ec463da9a50..57a213466721 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -481,9 +481,8 @@ static void acpi_device_del(struct acpi_device *device) list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) if (!strcmp(acpi_device_bus_id->bus_id, acpi_device_hid(device))) { - if (acpi_device_bus_id->instance_no > 0) - acpi_device_bus_id->instance_no--; - else { + ida_simple_remove(&acpi_device_bus_id->instance_ida, device->pnp.instance_no); + if (ida_is_empty(&acpi_device_bus_id->instance_ida)) { list_del(&acpi_device_bus_id->node); kfree_const(acpi_device_bus_id->bus_id); kfree(acpi_device_bus_id); @@ -634,6 +633,21 @@ static struct acpi_device_bus_id *acpi_device_bus_id_match(const char *dev_id) return NULL; }

+static int acpi_device_set_name(struct acpi_device *device, + struct acpi_device_bus_id *acpi_device_bus_id) +{ + struct ida *instance_ida = &acpi_device_bus_id->instance_ida; + int result; + + result = ida_simple_get(instance_ida, 0, ACPI_MAX_DEVICE_INSTANCES, GFP_KERNEL); + if (result < 0) + return result; + + device->pnp.instance_no = result; + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, result); + return 0; +} + int acpi_device_add(struct acpi_device *device, void (*release)(struct device *)) { @@ -668,7 +682,9 @@ int acpi_device_add(struct acpi_device *device,

acpi_device_bus_id = acpi_device_bus_id_match(acpi_device_hid(device)); if (acpi_device_bus_id) { - acpi_device_bus_id->instance_no++; + result = acpi_device_set_name(device, acpi_device_bus_id); + if (result) + goto err_unlock; } else { acpi_device_bus_id = kzalloc(sizeof(*acpi_device_bus_id), GFP_KERNEL); @@ -684,9 +700,16 @@ int acpi_device_add(struct acpi_device *device, goto err_unlock; }

+ ida_init(&acpi_device_bus_id->instance_ida); + + result = acpi_device_set_name(device, acpi_device_bus_id); + if (result) { + kfree(acpi_device_bus_id); + goto err_unlock; + } + list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);

if (device->parent) list_add_tail(&device->node, &device->parent->children); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 67f4fce22209..3746d4ce4857 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -245,6 +245,7 @@ struct acpi_pnp_type {

struct acpi_device_pnp { acpi_bus_id bus_id; /* Object name */ + int instance_no; /* Instance number of this object */ struct acpi_pnp_type type; /* ID type */ acpi_bus_address bus_address; /* _ADR */ char *unique_id; /* _UID */

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit f69953837ca5d98aa983a138dc0b90a411e9c763 ]

When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case.

Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot oslab@tsinghua.edu.cn Acked-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedi/qedi_main.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index a742b8856776..b0a404d4e676 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -1354,6 +1354,7 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi) if (!qedi->global_queues[i]) { QEDI_ERR(&qedi->dbg_ctx, "Unable to allocation global queue %d.\n", i); + status = -ENOMEM; goto mem_alloc_failure; }

From: Thomas Gleixner tglx@linutronix.de

commit 291da9d4a9eb3a1cb0610b7f4480f5b52b1825e7 upstream.

If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to mutex_lock() which is clearly wrong because mutex_lock() lacks the io_schedule_prepare()/finish() invocations.

Map it to mutex_lock_io().

Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define") Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Ingo Molnar mingo@kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/mutex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -183,7 +183,7 @@ extern void mutex_lock_io(struct mutex * # define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock) # define mutex_lock_killable_nested(lock, subclass) mutex_lock_killable(lock) # define mutex_lock_nest_lock(lock, nest_lock) mutex_lock(lock) -# define mutex_lock_io_nested(lock, subclass) mutex_lock(lock) +# define mutex_lock_io_nested(lock, subclass) mutex_lock_io(lock) #endif

/*

From: Eric Dumazet edumazet@google.com

commit e323d865b36134e8c5c82c834df89109a5c60dab upstream.

iproute2 package is well behaved, but malicious user space can provide illegal shift values and trigger UBSAN reports.

Add stab parameter to red_check_params() to validate user input.

syzbot reported:

UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18 shift exponent 111 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_calc_qavg_from_idle_time include/net/red.h:312 [inline] red_calc_qavg include/net/red.h:353 [inline] choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221 __dev_xmit_skb net/core/dev.c:3837 [inline] __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline] __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192 NF_HOOK_COND include/linux/netfilter.h:290 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215 dst_output include/net/dst.h:448 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] NF_HOOK include/linux/netfilter.h:295 [inline] ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535 dccp_finish_passive_close net/dccp/proto.c:123 [inline] dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118 dccp_terminate_connection net/dccp/proto.c:958 [inline] dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478 __sock_release+0xcd/0x280 net/socket.c:599 sock_close+0x18/0x20 net/socket.c:1258 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline]

Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/red.h | 10 +++++++++- net/sched/sch_choke.c | 7 ++++--- net/sched/sch_gred.c | 2 +- net/sched/sch_red.c | 7 +++++-- net/sched/sch_sfq.c | 2 +- 5 files changed, 20 insertions(+), 8 deletions(-)

--- a/include/net/red.h +++ b/include/net/red.h @@ -168,7 +168,8 @@ static inline void red_set_vars(struct r v->qcount = -1; }

-static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog, u8 Scell_log) +static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog, + u8 Scell_log, u8 *stab) { if (fls(qth_min) + Wlog > 32) return false; @@ -178,6 +179,13 @@ static inline bool red_check_params(u32 return false; if (qth_max < qth_min) return false; + if (stab) { + int i; + + for (i = 0; i < RED_STAB_SIZE; i++) + if (stab[i] >= 32) + return false; + } return true; }

--- a/net/sched/sch_choke.c +++ b/net/sched/sch_choke.c @@ -354,6 +354,7 @@ static int choke_change(struct Qdisc *sc struct sk_buff **old = NULL; unsigned int mask; u32 max_P; + u8 *stab;

if (opt == NULL) return -EINVAL; @@ -369,8 +370,8 @@ static int choke_change(struct Qdisc *sc max_P = tb[TCA_CHOKE_MAX_P] ? nla_get_u32(tb[TCA_CHOKE_MAX_P]) : 0;

ctl = nla_data(tb[TCA_CHOKE_PARMS]); - - if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log)) + stab = nla_data(tb[TCA_CHOKE_STAB]); + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log, stab)) return -EINVAL;

if (ctl->limit > CHOKE_MAX_QUEUE) @@ -420,7 +421,7 @@ static int choke_change(struct Qdisc *sc

red_set_parms(&q->parms, ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Plog, ctl->Scell_log, - nla_data(tb[TCA_CHOKE_STAB]), + stab, max_P); red_set_vars(&q->vars);

--- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -356,7 +356,7 @@ static inline int gred_change_vq(struct struct gred_sched *table = qdisc_priv(sch); struct gred_sched_data *q = table->tab[dp];

- if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log)) + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log, stab)) return -EINVAL;

if (!q) { --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -169,6 +169,7 @@ static int red_change(struct Qdisc *sch, struct Qdisc *child = NULL; int err; u32 max_P; + u8 *stab;

if (opt == NULL) return -EINVAL; @@ -184,7 +185,9 @@ static int red_change(struct Qdisc *sch, max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0;

ctl = nla_data(tb[TCA_RED_PARMS]); - if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log)) + stab = nla_data(tb[TCA_RED_STAB]); + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, + ctl->Scell_log, stab)) return -EINVAL;

if (ctl->limit > 0) { @@ -209,7 +212,7 @@ static int red_change(struct Qdisc *sch, red_set_parms(&q->parms, ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Plog, ctl->Scell_log, - nla_data(tb[TCA_RED_STAB]), + stab, max_P); red_set_vars(&q->vars);

--- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -649,7 +649,7 @@ static int sfq_change(struct Qdisc *sch, }

if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max, - ctl_v1->Wlog, ctl_v1->Scell_log)) + ctl_v1->Wlog, ctl_v1->Scell_log, NULL)) return -EINVAL; if (ctl_v1 && ctl_v1->qth_min) { p = kmalloc(sizeof(*p), GFP_KERNEL);

From: Markus Theil markus.theil@tu-ilmenau.de

commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 upstream.

Clear beacon ie pointer and ie length after free in order to prevent double free.

================================================================== BUG: KASAN: double-free or invalid-free \ in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341 kasan_slab_free include/linux/kasan.h:192 [inline] __cache_free mm/slab.c:3424 [inline] kfree+0xed/0x270 mm/slab.c:3760 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline] __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172 cfg80211_leave net/wireless/core.c:1221 [inline] cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline] call_netdevice_notifiers net/core/dev.c:2066 [inline] __dev_close_many+0xee/0x2e0 net/core/dev.c:1586 __dev_close net/core/dev.c:1624 [inline] __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476 dev_change_flags+0x8a/0x160 net/core/dev.c:8549 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/ibss.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1861,6 +1861,8 @@ int ieee80211_ibss_leave(struct ieee8021

/* remove beacon */ kfree(sdata->u.ibss.ie); + sdata->u.ibss.ie = NULL; + sdata->u.ibss.ie_len = 0;

/* on the next join, re-program HT parameters */ memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));

From: Marc Kleine-Budde mkl@pengutronix.de

commit 5d7047ed6b7214fbabc16d8712a822e256b1aa44 upstream.

In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch.

Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky leon@kernel.org Cc: Stephane Grosjean s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 -- 1 file changed, 2 deletions(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -26,8 +26,6 @@

MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter"); MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); -MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-Chip USB"); -MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB X6 adapter");

#define PCAN_USBPROFD_CHANNEL_COUNT 2 #define PCAN_USBFD_CHANNEL_COUNT 1