The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 2e13163b43e6bb861182ea999a80dd1d893c0cbf # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025082142-trend-rind-de4e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 2e13163b43e6bb861182ea999a80dd1d893c0cbf Mon Sep 17 00:00:00 2001 From: Bharat Bhushan bbhushan2@marvell.com Date: Thu, 22 May 2025 15:36:26 +0530 Subject: [PATCH] crypto: octeontx2 - Fix address alignment on CN10K A0/A1 and OcteonTX2

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size()

Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment.

This patch ensures all addresses are aligned as mentioned above.

Signed-off-by: Bharat Bhushan bbhushan2@marvell.com Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Herbert Xu herbert@gondor.apana.org.au

diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index e27e849b01df..98de93851ba1 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -34,6 +34,9 @@ #define SG_COMP_2 2 #define SG_COMP_1 1

+#define OTX2_CPT_DPTR_RPTR_ALIGN 8 +#define OTX2_CPT_RES_ADDR_ALIGN 32 + union otx2_cpt_opcode { u16 flags; struct { @@ -417,10 +420,9 @@ static inline struct otx2_cpt_inst_info * otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - int align = OTX2_CPT_DMA_MINALIGN; struct otx2_cpt_inst_info *info; - u32 dlen, align_dlen, info_len; - u16 g_sz_bytes, s_sz_bytes; + u32 dlen, info_len; + u16 g_len, s_len; u32 total_mem_len;

if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT || @@ -429,22 +431,54 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, return NULL; }

- g_sz_bytes = ((req->in_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ------------------------------------ + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | --------------------------------| + * | | padding for ARCH_DMA_MINALIGN | + * | | alignment | + * |------------------------------------| + * | SG List Header of 8 Byte | + * |------------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |---------------------------------- | + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | -------------------------------| + * | | padding for 32B alignment | + * |------------------------------------| + * | Result response memory | + * | Alignment = 32Byte | + * ------------------------------------ + */

- dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE; - align_dlen = ALIGN(dlen, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = align_dlen + info_len + sizeof(union otx2_cpt_res_s); + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + s_len = ((req->out_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + + dlen = g_len + s_len + SG_LIST_HDR_SIZE; + + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (ARCH_DMA_MINALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += ALIGN(dlen, OTX2_CPT_RES_ADDR_ALIGN); + total_mem_len += sizeof(union otx2_cpt_res_s);

info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) return NULL;

info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + SG_LIST_HDR_SIZE + g_len;

((u16 *)info->in_buffer)[0] = req->out_cnt; ((u16 *)info->in_buffer)[1] = req->in_cnt; @@ -460,7 +494,7 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, }

if (setup_sgio_components(pdev, req->out, req->out_cnt, - &info->in_buffer[8 + g_sz_bytes])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -476,8 +510,10 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + align_dlen; - info->comp_baddr = info->dptr_baddr + align_dlen; + info->completion_addr = PTR_ALIGN((info->in_buffer + dlen), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + dlen), + OTX2_CPT_RES_ADDR_ALIGN);

return info;