From: Ajit Khaparde ajit.khaparde@broadcom.com
[ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ]
The Broadcom BCM5760X NIC may be a multi-function device.
While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated.
Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO.
[kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broad... Signed-off-by: Ajit Khaparde ajit.khaparde@broadcom.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Andy Gospodarek gospo@broadcom.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 3bc7058404156..aef73bc36ee98 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4986,6 +4986,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
From: Peng Hongchi hongchi.peng@siengine.com
[ Upstream commit 1134289b6b93d73721340b66c310fd985385e8fa ]
When using dma_map_sg() to map the scatterlist with iommu enabled, the entries in the scatterlist can be mergerd into less but longer entries in the function __finalise_sg(). So that the number of valid mapped entries is actually smaller than ureq->num_reqs,and there are still some invalid entries in the scatterlist with dma_addr=0xffffffff and len=0. Writing these invalid sg entries into the dma_desc can cause a data transmission error.
The function dma_map_sg() returns the number of valid map entries and the return value is assigned to usb_request::num_mapped_sgs in function usb_gadget_map_request_by_dev(). So that just write valid mapped entries into dma_desc according to the usb_request::num_mapped_sgs, and set the IOC bit if it's the last valid mapped entry.
This patch poses no risk to no-iommu situation, cause ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg() to map the scatterlist whith iommu disabled.
Signed-off-by: Peng Hongchi hongchi.peng@siengine.com Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index b341bbc9f1dad..abc2271799e0a 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -885,10 +885,10 @@ static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, }
/* DMA sg buffer */ - for_each_sg(ureq->sg, sg, ureq->num_sgs, i) { + for_each_sg(ureq->sg, sg, ureq->num_mapped_sgs, i) { dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc, sg_dma_address(sg) + sg->offset, sg_dma_len(sg), - sg_is_last(sg)); + (i == (ureq->num_mapped_sgs - 1))); desc_count += hs_ep->desc_count; }
From: Abhishek Pandit-Subedi abhishekpandit@chromium.org
[ Upstream commit 99516f76db48e1a9d54cdfed63c1babcee4e71a5 ]
ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Reviewed-by: Benson Leung bleung@chromium.org Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Signed-off-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Signed-off-by: Jameson Thies jthies@google.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20240510201244.2968152-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/typec/ucsi/ucsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index de87d0b8319d0..179ad343f42f0 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -446,7 +446,7 @@ ucsi_register_displayport(struct ucsi_connector *con, bool override, int offset, struct typec_altmode_desc *desc) { - return NULL; + return typec_port_register_altmode(con->port, desc); }
static inline void
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 5afc2f763edc5daae4722ee46fea4e627d01fa90 ]
If the link is powered off during suspend, electrical noise may cause errors that are logged via AER. If the AER interrupt is enabled and shares an IRQ with PME, that causes a spurious wakeup during suspend.
Disable the AER interrupt during suspend to prevent this. Clear error status before re-enabling IRQ interrupts during resume so we don't get an interrupt for errors that occurred during the suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090 Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.c... Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com [bhelgaas: drop pci_ancestor_pr3_present() etc, commit log] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/aer.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 6b5c9f7916fac..ee38ca162a7c8 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -1407,6 +1407,22 @@ static int aer_probe(struct pcie_device *dev) return 0; }
+static int aer_suspend(struct pcie_device *dev) +{ + struct aer_rpc *rpc = get_service_data(dev); + + aer_disable_rootport(rpc); + return 0; +} + +static int aer_resume(struct pcie_device *dev) +{ + struct aer_rpc *rpc = get_service_data(dev); + + aer_enable_rootport(rpc); + return 0; +} + /** * aer_root_reset - reset link on Root Port * @dev: pointer to Root Port's pci_dev data structure @@ -1447,6 +1463,8 @@ static struct pcie_port_service_driver aerdriver = { .service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe, + .suspend = aer_suspend, + .resume = aer_resume, .remove = aer_remove, .reset_link = aer_root_reset, };
From: Kishon Vijay Abraham I kishon@ti.com
[ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ]
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf
Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@sieme... Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Achal Verma a-verma1@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Jan Kiszka jan.kiszka@siemens.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Reviewed-by: Siddharth Vadapalli s-vadapalli@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pci-keystone.c | 44 ++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index b18ddb2b9ef8b..a16fe2a558c7a 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -35,6 +35,11 @@ #define PCIE_DEVICEID_SHIFT 16
/* Application registers */ +#define PID 0x000 +#define RTL GENMASK(15, 11) +#define RTL_SHIFT 11 +#define AM6_PCI_PG1_RTL_VER 0x15 + #define CMD_STATUS 0x004 #define LTSSM_EN_VAL BIT(0) #define OB_XLAT_EN_VAL BIT(1) @@ -107,6 +112,8 @@
#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
+#define PCI_DEVICE_ID_TI_AM654X 0xb00c + struct ks_pcie_of_data { enum dw_pcie_device_mode mode; const struct dw_pcie_host_ops *host_ops; @@ -534,7 +541,11 @@ static int ks_pcie_start_link(struct dw_pcie *pci) static void ks_pcie_quirk(struct pci_dev *dev) { struct pci_bus *bus = dev->bus; + struct keystone_pcie *ks_pcie; + struct device *bridge_dev; struct pci_dev *bridge; + u32 val; + static const struct pci_device_id rc_pci_devids[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK), .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, @@ -546,6 +557,11 @@ static void ks_pcie_quirk(struct pci_dev *dev) .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, { 0, }, }; + static const struct pci_device_id am6_pci_devids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654X), + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, + { 0, }, + };
if (pci_is_root_bus(bus)) bridge = dev; @@ -567,10 +583,36 @@ static void ks_pcie_quirk(struct pci_dev *dev) */ if (pci_match_id(rc_pci_devids, bridge)) { if (pcie_get_readrq(dev) > 256) { - dev_info(&dev->dev, "limiting MRRS to 256\n"); + dev_info(&dev->dev, "limiting MRRS to 256 bytes\n"); pcie_set_readrq(dev, 256); } } + + /* + * Memory transactions fail with PCI controller in AM654 PG1.0 + * when MRRS is set to more than 128 bytes. Force the MRRS to + * 128 bytes in all downstream devices. + */ + if (pci_match_id(am6_pci_devids, bridge)) { + bridge_dev = pci_get_host_bridge_device(dev); + if (!bridge_dev && !bridge_dev->parent) + return; + + ks_pcie = dev_get_drvdata(bridge_dev->parent); + if (!ks_pcie) + return; + + val = ks_pcie_app_readl(ks_pcie, PID); + val &= RTL; + val >>= RTL_SHIFT; + if (val != AM6_PCI_PG1_RTL_VER) + return; + + if (pcie_get_readrq(dev) > 128) { + dev_info(&dev->dev, "limiting MRRS to 128 bytes\n"); + pcie_set_readrq(dev, 128); + } + } } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, ks_pcie_quirk);
From: Dan Williams dan.j.williams@intel.com
[ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ]
One of the true positives that the cfg_access_lock lockdep effort identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dw... Reported-by: Imre Deak imre.deak@intel.com Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Keith Busch kbusch@kernel.org [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Tested-by: Hans de Goede hdegoede@redhat.com Tested-by: Kalle Valo kvalo@kernel.org Reviewed-by: Dave Jiang dave.jiang@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index deafd229ef8b4..41050a35631fa 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5200,10 +5200,12 @@ static void pci_bus_lock(struct pci_bus *bus) { struct pci_dev *dev;
+ pci_dev_lock(bus->self); list_for_each_entry(dev, &bus->devices, bus_list) { - pci_dev_lock(dev); if (dev->subordinate) pci_bus_lock(dev->subordinate); + else + pci_dev_lock(dev); } }
@@ -5215,8 +5217,10 @@ static void pci_bus_unlock(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } + pci_dev_unlock(bus->self); }
/* Return 1 on successful lock, 0 on contention */ @@ -5224,15 +5228,15 @@ static int pci_bus_trylock(struct pci_bus *bus) { struct pci_dev *dev;
+ if (!pci_dev_trylock(bus->self)) + return 0; + list_for_each_entry(dev, &bus->devices, bus_list) { - if (!pci_dev_trylock(dev)) - goto unlock; if (dev->subordinate) { - if (!pci_bus_trylock(dev->subordinate)) { - pci_dev_unlock(dev); + if (!pci_bus_trylock(dev->subordinate)) goto unlock; - } - } + } else if (!pci_dev_trylock(dev)) + goto unlock; } return 1;
@@ -5240,8 +5244,10 @@ static int pci_bus_trylock(struct pci_bus *bus) list_for_each_entry_continue_reverse(dev, &bus->devices, bus_list) { if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } + pci_dev_unlock(bus->self); return 0; }
@@ -5273,9 +5279,10 @@ static void pci_slot_lock(struct pci_slot *slot) list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot != slot) continue; - pci_dev_lock(dev); if (dev->subordinate) pci_bus_lock(dev->subordinate); + else + pci_dev_lock(dev); } }
@@ -5301,14 +5308,13 @@ static int pci_slot_trylock(struct pci_slot *slot) list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot != slot) continue; - if (!pci_dev_trylock(dev)) - goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); goto unlock; } - } + } else if (!pci_dev_trylock(dev)) + goto unlock; } return 1;
@@ -5319,7 +5325,8 @@ static int pci_slot_trylock(struct pci_slot *slot) continue; if (dev->subordinate) pci_bus_unlock(dev->subordinate); - pci_dev_unlock(dev); + else + pci_dev_unlock(dev); } return 0; }
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 2f38cf730caedaeacdefb7ff35b0a3c1168117f9 ]
A malformed USB descriptor may pass the lengthy mixer description with a lot of channels, and this may overflow the 32bit integer shift size, as caught by syzbot UBSAN test. Although this won't cause any real trouble, it's better to address.
This patch introduces a sanity check of the number of channels to bail out the parsing when too many channels are found.
Reported-by: syzbot+78d5b129a762182225aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/0000000000000adac5061d3c7355@google.com Link: https://patch.msgid.link/20240715123619.26612-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 67eb1293fa155..1374a4e093b3f 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1906,6 +1906,13 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, bmaControls = ftr->bmaControls; }
+ if (channels > 32) { + usb_audio_info(state->chip, + "usbmixer: too many channels (%d) in unit %d\n", + channels, unitid); + return -EINVAL; + } + /* parse the source unit */ err = parse_audio_unit(state, hdr->bSourceID); if (err < 0)
linux-stable-mirror@lists.linaro.org
-
Sasha Levin