Some H5 boards seem to not have proper trace lengths for eMMC to be able to use the default setting for the delay chains under HS-DDR mode. These include the Bananapi M2+ H5 and NanoPi NEO Core2. However the Libre Computer ALL-H3-CC-H5 works just fine.

For the H5 (at least for now), default to not enabling HS-DDR modes in the driver, and expect the device tree to signal HS-DDR capability on boards that work.

Reported-by: Chris Blake chrisrblake93@gmail.com Fixes: 07bafc1e3536 ("mmc: sunxi: Use new timing mode for A64 eMMC controller") Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai wens@csie.org --- drivers/mmc/host/sunxi-mmc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 279e326e397e..7415af8c8ff6 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1399,7 +1399,16 @@ static int sunxi_mmc_probe(struct platform_device *pdev) mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;

- if (host->cfg->clk_delays || host->use_new_timings) + /* + * Some H5 devices do not have signal traces precise enough to + * use HS DDR mode for their eMMC chips. + * + * We still enable HS DDR modes for all the other controller + * variants that support them. + */ + if ((host->cfg->clk_delays || host->use_new_timings) && + !of_device_is_compatible(pdev->dev.of_node, + "allwinner,sun50i-h5-emmc")) mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;

ret = mmc_of_parse(mmc);